Copy user ID
Hello,
Currently we use a R/3 release 4.7 D and we want to copy all of our users (new group rule).
For exemple : we want change this user id
Former user id Dupuy ---> FR4135 New user id
But we want to avoid to loose some specific parameters in SAP created for the user ID Dupuy ( Personal setting in Me21n, Table setting, Variant, link with Personnal number....)
Do you know if you've developed special tools to copy in mass User id and keep the maximum personnal setting for each user id ?
thanks in advance
can anyone please help me in my above query..?
Similar Messages
-
Was I supposed to get a hard copy user manual with my new phone??
Was I supposed to get a hard copy user manual with my new phone??
I did not get one - but would like onehttp://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf
There you go!
Enjoy -
Hi,
I used this query for copy user setting from Manager to all other users. This query running successfully but problem is this all the setting is copied but manager user lost all settings i.e all udf's come under general category which is previously distributed to different category. Which is fine for rest of the users.
ALTER PROCEDURE [dbo].[CopyUserSettings] AS
Declare @ManagerId int
Declare @MaxId int
Declare @NextId int
Declare @TempId int
-- Change value below if copying from other than Manager(1)
Select @ManagerId = 1
Select @MaxId = max(UserID) + 1 FROM OUSR
Select @TempId = 1
Select @NextId = @ManagerId
if exists (select 1 from sysobjects where name = 'temp_dev_sup')
Begin
drop table temp_dev_sup
End
select * into temp_dev_sup from cprf where usersign=@ManagerId
Delete from cprf where usersign= @ManagerId
WHILE @TempId < @maxid
BEGIN
If @tempid <> @managerid
BEGIN
Update temp_dev_sup Set usersign= @TempID where usersign=@NextId
Insert into cprf Select * from temp_dev_sup where usersign= @TempId
END
Select @NextId = @TempId
Select @TempId = @TempId + 1
If @TempId >= @maxid
BREAK
Else
CONTINUE
END
Thanks
RahulHi Rahul,
Change Select @ManagerId = 1 from 1 to some other user id having correct form settings and execute belwo procedure again.
ALTER PROCEDURE [dbo].[CopyUserSettings] AS
Declare @ManagerId int
Declare @MaxId int
Declare @NextId int
Declare @TempId int
-- Change value below if copying from other than Manager(1)
Select @ManagerId = 1
Select @MaxId = max(UserID) + 1 FROM OUSR
Select @TempId = 1
Select @NextId = @ManagerId
if exists (select 1 from sysobjects where name = 'temp_dev_sup')
Begin
drop table temp_dev_sup
End
select * into temp_dev_sup from cprf where usersign=@ManagerId
--Delete from cprf where usersign= @ManagerId
WHILE @TempId < @maxid
BEGIN
If @tempid <> @managerid
BEGIN
Update temp_dev_sup Set usersign= @TempID where usersign=@NextId
Insert into cprf Select * from temp_dev_sup where usersign= @TempId
END
Select @NextId = @TempId
Select @TempId = @TempId + 1
If @TempId >= @maxid
BREAK
Else
CONTINUE
END
Thanks,
Neetu -
Dear All,
I have a problem about user Login in SQL Server 2008.
because I restore database from another server, user Login for that database already created but not in instance user login. So when user login into instance name they have failed login.
what that i missed before restore database so when user login into instance they do not failed?
or how that i can copy user login from database to instance login? because when i add from add login wizard i have error user already created.
please help.
Best regards,
SurbaktiWhen a database is moved from one server to another server the login ids stored in the master database do not align with the login ids
stored in each user database or there is no login id or password associated with the user and user in the database becomes ORPHAN.
To fix this problem you need to transfer Logins & password refer below link to Transfer Logins & Passwords.
How to transfer logins and passwords between instances of SQL Server
once you transfer logins fix orphan users, refer below link to fix orphan users
http://blog.sqlauthority.com/2007/02/15/sql-server-fix-error-15023-user-already-exists-in-current-database/
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
Praveen Dsa | MCITP - Database Administrator 2008 |
My Blog | My Page -
Copying user specific reporting variants to other users
Hi,
Does anyone have experience in copying user saved variants to other users?
We'd like to create a few complex variants for reporting and then distribute them to all of our users.
Thanks!
-Miikka
Edited by: Miikka Åkerman on Nov 18, 2009 2:40 PMHi,
In reports input Screen you have this option,
In selection screen you can find, Save as a New varient, give some name and save , don't select Save as User Varient and save it.
Note: Check with the select Save as User Varient & Use as default Varient options.
Thanks
Reddy -
Hi All,
I am on version 1.00.72.00.xxxxx I am unable to see the copy user option when I right click on users in the studio. I thought this was available in SP07. am i missing something ?
Message was edited by: Tom FlanaganI upgraded the studio to Version: 1.0.7300 and the DB is at 1.00.72.00.388670. The Issue still exists. I checked SAP | HANA Developer Edition and there is no version 72 for the studio. hence I used 73. any thoughts ?
-
When i am executing SU01 t-code copy user is greyed out and infact copy user icon is also not showing . I already have the SAP_ALL and SAP_NEW authorization with my id .
Please suggest on this .Check this help:
http://help.sap.com/saphelp_nw70ehp1/Helpdata/EN/52/6711c5439b11d1896f0000e8322d00/content.htm
http://help.sap.com/saphelp_nw70ehp1/Helpdata/EN/52/6711c5439b11d1896f0000e8322d00/frameset.htm
You are authorized to assign the authorizations, systems, roles, profiles, and reference users that are assigned to the user to be copied. Otherwise, the role for which you do not have authorization is not copied to the new user master record. When copying or assigning a reference user, the system checks whether you are authorized to assign its profiles and roles.
If you cannot copy the template user completely, because, for example, the reference user does not exist in the current system, the system displays a log with the exact causes of the error. -
Copy user roles/profiles : Su01
Hello,
I want to copy user roles /privileges from one user to other?
how do we do this and which user can do this ? my pisuper does not seem to have authority to copy user profiles from one user to other?
ThanksTry to Copy the user(Src user to Target user) from SU01 by logging in your user. When it displays authorization error, open a new Session of SU53. It will tell you the missing authorization objects. Add those authorizations to your user & you will be able to copy Users using ur userid.
If you want to keep it simple.. Give yourselves SAP_All. You can do whatever you want.
Copying Users
http://help.sap.com/saphelp_nw04/helpdata/en/52/6711c5439b11d1896f0000e8322d00/content.htm
Regards,
Siva Maranani -
Copying User Menu using Copy Express
Dear All ,
We have customized the 'User Menu' to hold some customized reports. we need to copy all those settings to another DB.
When trying to copy 'User Menu' settings from one DB to another DB it is not taking the settings to the new DB with any options.
Kindly let me know what should be done, so that we could able to copy the User Menu settings to another target company ?
Thanks,
Raj.Yes Gordon, All the users are same in numbers and codes.
Im trying to copy the user settings from Developement DB to Production DB.
Kindly provide m a solution.
Thanks,
Raj, -
Copy users with their Org assignments
Hi,
I'm working in a SAP system in which SAP Users are directly linked to Positions (for indirect role assignment need).
Is it possible to copy users with all assignments ?
All tests done using SU01 only copy User's data without their assignments.
Thanks and regards.Srihari Rao wrote:>
> > When I create a user copy, in the popup window I can choose to copy or not user's reference but I do not see how to include Organizational Assignment links
>
> Hi,
>
> When the roles are copied from the user, the org levels are copied too (if maintained in the roles of the user).
>
> ex: user1 has roles assigned to him which have Org levels maintained for it.Now when you copy the user1 data, say for user2, and you select "Roles" from the copy options... the user2 will get the same org levels that are available / restricted for user1.
>
> Hope am clear.
Clear yes, relation with the original question, no.
Gaetan is talking about the position in the organization to which the USERID is linked. I personally think there's no way to copy that along with the user.
You can link the copied user to the same position the original user had/has. But that would always be an extra action as far as I know. (This is another one were I'd love to be proven wrong....)
If you have to copy a lot of users maybe you can ask in the HR forum(s) about automating the organizational assignment with ecatt. -
Copying User authorization between databases
Hi All,
Let us say i got two DB. How to copy user authorization between them.
Thanks and Regards,
VinHi Vin.......
You can use Copy express in order to transfer Authorizations from one DB to Other......
Regads,
Rahul -
Copying User Master without over writing
All,
I have a unique requirement from our CRM implementation team. They want to extract a large number of users from our ECC system and upload them into CRM. I know SAP_USER can accomplish this via a client copy, but they do not want he existing users to be overwrittern in CRM; as I remember the client copy will overwrite an existing data.
Does any one know how to accomplish this?
Regards,
JoseHi,
As a workaround first take the export of CRM users using SAP_USERS and keep it, after take the export from ECC and Import into target system , once this is done, you can import your first export of CRM once again .
But
Copy user from ECC-->CRM
How you are going to handle Auth profile ....????
Regards, -
Copied User Object remove Mailbox ID
Hi,
Not sure if this should be posted under groupwise? I created an new user account (from IManager)and copied from an exisiting object as the new user has the same job function. From Console 1 When I try to edit the new user they have the copied users groupwise account. Is there a way I can reove not dlete the copied user from the new user as it is grayed out and won't allow me to remove it
ThanksHi
If memory serves right, just open console one, in the GroupWise view select the new user, right-click on it and some where under GroupWise utilities there is an eDir association option - just disassociate this account from the GroupWise account. You can then add the new user as a new GroupWise user.
Let us know how it goes.
Cheers, -
Copy Users/Permissions/objects from a database to another database
Can anyone help me how to copy users, permissions, stored procedures, views, functions and all other objects from one database to another database.
I need a SQL Script to get this job done. I cannot use backup restore or SSIS Package.There's also a transfer sqlserver objects task available in SSIS
http://www.mssqltips.com/sqlservertip/2064/transfer-database-task-and-transfer-sql-server-objects-task-in-ssis/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Copy user data from Desktop HD to external HD
This is for a customer; I fix PCs and MACs for a living. Please answer all 3 questions below if you are able.
Old PowerMAC G5 has non-working mouse (i.e new mouse in different USB connector fails too) PLUS Other problems too. It does boot to an account with no login Password. However Login password for user account with admin privleges has been forgotten by customer. Customer wants to get a new MAC to replace G5.
So my job is to copy user data ONLY from PowerMAC HD to a NEW external usb HD for later copy to a MAC to be purchased later.. My plan is to use Target Disk to access the PowerMAC G5 HD (i.e G5 never boots with this approach; we are seeing G5 as it's HD ONLY.
So we have a MAC laptop in the middle running OS 10.4 or higher (unknown at the moment) and I connect via firewire cable and Target Disk to the G5 and ALSO connect the new usb external HD. It then use Disk Utility to reformat the external usb HD to Apple OS extended. And also wipe out all permissions on the external HD.
And then I drag and drop user home directories (and subfolders) from the G5 to the external HD.
HERE IS MY QUESTION: When I try to copy the user account with admin privleges which DOES HAVE A LOGIN PASSWORD OR the admin account home directories will OS X on the MAC laptop in the middle ASK ME FOR THE CORRESPONDING ACCOUNT PASSWORD or in some other way (PLEASE SPECIFY) get in the way VS just doing the copy ??
Because customer forgot the login password AND since mouse fails on G5, I cannot use an OS X install CD to wipe out the account password by booting from OS X Install CD etc etc.
SO IF THE MAC IN THE MIDDLE ASKS FOR THE LOGIN PASSWORD I am dead, I have no way of backing up the customer's data, can only back up from the user accounts with NO login password.
(2) I am also wondering if the MAC laptop will object to copying the home directories for user accounts with NO login password.
(3) And if the MAC in the middle objects or asks for passwords PLEASE PROVIDE A WORKAROUND if you know one. Please provide step by step instructions or a link to same as my MAC knowledge is much inferior to my PC knowledge and I probably can not "fill in the blanks"
MikeYou will be asked to provide an administrator password for the computer you're working at during the copying process. The login passwords for the accounts aren't needed to copy the data, but if any account is protected by FileVault, that account's password will be needed to decrypt it.
For example, if you're on a computer which has an administrator password of '1234' and are trying to copy the home folder of an account for which the password is '5678', you'll need to provide '1234' to copy the home folder, but not '5678'. Opening that account's FileVault-protected disk image home folder will require '5678'.
Additionally, if the numeric UIDs of the accounts match, no password will be needed to perform the copy. This generally only applies to one account per computer, and is independent of account passwords.
(62724) -
Copying user access in Hyperion Planning
Hi All,
I am supposed to copy the one user access to another user...I know we can copy user access to a newuser or existing user in Essbase....Is this possible in Hyperion planning 4.0..??Please let me know..
Regards,
PrabhasAmit Gupta wrote:
If you dont have access setup by groups, there is no easy way. Well.. what i am suggesting is relatively easy but you need planning server access for this.
1. Export all security using exportsecurity.cmd, you can set parameters to make sure you are exporting exactly what you need.
2. find the user whose access you want to copy.
3. replicate these rows for new user.
4. then run importsecurity.cmd to import access for new user.Where these Exportsecurity.cmd,Importsecurity.cmd statements available ? and How to use those in Planning web ?
Please suggest
Maybe you are looking for
-
Why do I need to declare "defaultButton" ? (In a component form part of view stack)
After doing some research and some help from FlexGuy in another thread, I realize that I need to make sure I have custom components initialized before accessing parts of the component. Just recently I was thrown for a long time when I tried to first
-
Alter Table Add column not null default value
I want to add two columns to a table with not null and default as 0 for both columns Can i write the whole in one statement or do i have to split statement I tried this, but didn't work alter table DWSODS01.DWT00301_ORD_DTL_OMS add ( COMB_ORD_FLG NUM
-
Scheduling Agreement Release Strategy Issue
Hi, We have a typical problem in Scheduling Agreement Release Strategy. Once the SA is released for the first time it should restart the release strategy again if there is a change in Quantity or Value or Purchasing group. The release strategy is get
-
LabVIEW FPGA: The compilation failed due to a xilinx error
I'm getting a "Compilation failed due to Xilinx error" trying to compile code in LabVIEW 2013.The code had compilated successfully in labview2012. Any suggestions on what is causing this issue? Details: ERROR:HDLCompiler:432 - "C:\NIFPGA\jobs\THY4t7n
-
My iMac opens to a file and not a home page. How do I make it open to my desktop?
I must have inadvertantly changed something on my iMac (running 10.9). When the computer starts up it briefly shows the home screen then, immediately, it goes to some type of file. How do I get it to open in my desktop again?