Copying 2 drives to 1 for the same project

I'm copying an external drive and have a 2nd for the same project I want to also copy (to the same external drive) and am wondering if I'll have any issues with media becoming unlinked?
Anyone have any ideas?
.

That didn't work at-all. That Media Manager deal is way too confusing in the way the options and parameters are worded - It's like reading riddles. And, I kept getting some kind of i/o error message.
Blah.
I copied all the files to a single new drive with 2 partitions and named the partitions the same as the 2 drives I previously had the files on.
Seems to be working fine other than losing some render files which is pretty normal anyway for FCP.
.

Similar Messages

  • MULTIPLE  SCRATCH  DISKS FOR THE SAME PROJECT

    Hello... I have a quick scratch disc question:
    I have project that is running too low on scratch disk space. Can I use my boot drive (that has FCP on it) as an alternate scratch disk for the same project? Or does one project have to have the same scratch disk?
    Thanks!
    - TEXASFLOOD

    Hi Texasflood,
    Having all the media in one place is preferable. Among other things when using multiple scratch disks you always have to make sure and double check that your logging bins are correctly set and that FCP is using the scratch disk you want.
    What you could do is use Media manager to move the existing media to the new scratch disk with plenty of space (Media manager will reconnect all the media) and then capture your remaining 24GB in your new scratch disk.
    Read about how to use Media Manager in the manual and checkout the paragraph in this linked article titled [Copying And Moving Projects|http://www.kenstone.net/fcphomepage/media_manager_fcp_4balis.html].
    If you do use MM choose to copy and not move media, then for the piece of mind check first that everything is in place and working and only then delete the media in your older drive.
    G.

  • Marking duplicate opportinities for the same project

    Hi
    Can we mark duplicate opportunities for the same project??
    Regards
    Aakshi

    Hi,
    Pls go to, Enterprise mangaer --> Monitoring -> incident --> Search for the target and  select as "show all"  will give you alert details.
    Enterpise --> Monitoring --> Incident Manager: Search -->
    Last updated : Date Range:< >
    Target Name : D B NAME
    Target Type:<DB TYPE>
    Include members             : Target and all  member
    Status : Show both open and closed
    Supressed : Show all
    2)Please verify your notification setup
    Setup --> Incident Rules => Select your rule(will be in the alert) -->edit --> Select the event --> NExt --> Add actions --> edit
    Repeat Notifications
    Both basic and advanced notifications can be sent repeatedly. The repeat notifications will stop only when one of the following conditions is met: The incident is acknowledged, the incident has cleared, or the maximum number of repeat notifications has been reached. Repeat notification is not supported for corrective action job status updates and causal analysis status updates on events.
      Send Repeat notifications  --> Enabled?  if is enabled then  u will get repeated notification.
    OR if you set the frequency like 15 mins , 5 notification then u will receive  5 on every 15 mins if the alert persists.
    Regards
    Krishnan

  • Can we have two textures for the same project ?

    Hello all
    I use Captivate4. In my project, the background transparency for Playbar controls is 100%. So the texture would be seen as the background for the PlayBar. I have a requirement of hiding PlayBack Controls in few slides. Then I would like to change my texture to some other image. in brief, I would like to show one texture when the PlayBar is visible & another texture when the PlayBar is invisible.
    Is that possible?
    Thanks & regards,
    Kartik.

    OK.  This would be a little easier to do in Captivate 5 which has Master Slides and Playbar Overlay. But since you have Captivate 4 you will need to make do with adding graphics to the background of the actual slide, and just turning off the Playbar.
    From the graphics you added to your last post, it looks like you already know what you want the background to look like. You want a different background for Slide A and Slide B.  One way to do this is to add the graphic to each slide, then right-click and select Merge with Background.  But you can also just put the image on the lowest layer on the timeline of each slide and the effect would be similar.
    Regarding the Playbar...Since you are on Captivate 4, you do not have the option to set Playbar to Overlay.  I've just looked in Captivate 4 but the option is missing.  Here is what the Skin Editor looks like in Captivate 4 and 5.  Notice the Playbar Overlay setting is missing in Cp4.  There may be another way to do this but I don't know.
    This playbar overlay option would have allowed you to set the position of the playbar as sitting over the bottom 30 pixels or so of the stage area.  Since you can't do this, you may need to be satisfied with seeing the area occupied by the playbar go blank when it is hidden.
    To hide your playbar on Slide B, you will need to add an Advanced Action on Slide Enter that turns off the playbar by assigning the variable cpCmndShowPlaybar to 0.  Here is what that looks like in the Slide Properties dialog for your Slide B.

  • HT3702 why did i get charged three times for the same purchase? is it because i use my apple id on three devices.. two iphones, and ipad... and and macbook geez apple i support you enough can i just pay for one copy of the audiobook

    why did i get charged three times for the same purchase? is it because i use my apple id on three devices.. two iphones, and ipad... and and macbook geez apple i support you enough can i just pay for one copy of the audiobook

    These are user-to-user forums, you are not talking to Apple here.
    If it was an audiobook then they are one-time only downloads, to get it on your other devices you need to sync it to them and not re-download it oneach. You can try contacting iTunes support and see if they will refund or credit you for the second and third downloads : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • I am trying to shift my backup folder for many weeks to another location/drive on my pc hard drive(windows xp). have tried to use the recommended JUNCTION for the same but do not have a complete step by step instruction to do that. can anybody help me

    i am trying to shift my backup folder for many weeks to another location/drive on my pc hard drive(windows xp). have tried to use the recommended JUNCTION for the same but do not have a complete step by step instruction to do that. can anybody help me

    You can redirect <Profile>\<AppData>\Apple Computer\MobileSync\Backup to a folder on another drive using NTFSLink (shell ext., might only work on XP) or Junction (cmd line tool).
    In essence you move the existing folder to a new location, create an empty folder where the old one used to be, then get the operating system/tool to link the two togther and silently redirect any file operation on the old location through to the new one.
    tt2

  • More than one location for the same library?

    My library is on an external drive which is almost full. Is it possible to just extend and continue the same library to additional drives? How do I specify multiple locations for the same library?

    To add to Roddy's post I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
    If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your original Domain.sites files before starting the splitting process and move it to another location on your HD until you're satisfied the separation process is completed and what you want.
    This lets me edit several sites and only republish the one I want.
    OT

  • HT204053 my wife and i have seperate itunes accounts is there a way we can link our accounts to share songs so we dont have to pay for the same song twice?

    When the first ipad came out i set it up and created an itunes account, since then she got an iphone and an ipad and everything was good. I had an android but wanted to try out the iphone. When i set it up ut jumpled all of our contacts, apps, and everythin. it was a mess.
         Since, i purchased and ipad 2 and an iphone and to keep our stuff from combing i used a different computer and created an new apple ID for myself so our info wouldnt combine, I was wondering if i did the right thing or if i should have went about it a different way. I was going to see if there was a way when she purchased a song i could get it. I dont want to pay for the same song twice and only want to share songs. If i cant do this can i copy her library and paste it into my itunes??
    Any help wouldl be greatly apprecieated we both have icloud set up but i cant figure out the best solution.

    Welcome to the world of digital media. Your can't really transfer it. I don't know what the rules are about transferring to your spouse but I do know that in some cases when you die, your heirs cannot inherit your digital media. This is why there is still an advantage to buying the CD since the usage rights belong to whomever holds the physical media.
    A possible workaround is to burn the songs to a music CD with yout account (tracks only without song titles) and then having your wife upload it as a regular music CD onto her account. It's been a while since i've done this so I'm not sure if it would work now.
    Please note that I'm not advocating copyright and/or TOS violations. I'm only suggesting ways to copy music for your own personal use which has traditonally been permitted. I only did this because I wanted to convert iTunes songs to mp3 files so I could burn them onto a data CD for use in my car. It would make sense that since married couples are a joint entity, this would be personal use.
    Also, I'm not a lawyer so don't take this as legal advice.

  • Itunes library tranfer from one hard drive to another on the same computer

    Hello I have two hard drives on my mac g4 and the first has 80gig and i only have 10 gig of memory left to fill in my ipod library so... I want to move the itunes library/song data from one hard drive to another, how do I do this? the ipod has the ability to hold 40gig of songs etc. so I know the main hard drive will be full before my ipod will be... I'm new to apple and have had a pc for several years but had too many problems with viruses and like what I've learned so far on my mac thanks for your help out there... you can email me at [email protected] thanks again for any help out there

    For the record, hard drives don't hav ememory it is just storage space.
    Anyway, in your user folder you would want to drag the Music folder to the other hard drive. Once that is finsihed copying in the iTunes preferences you would want to point iTunes to the new drive and folder for the music folder it should be using.

  • Multiple DEVL_PROJECT_ID for the same model in CZ_DEVL_PROJECTS Table.

    Hi,
    Did anyone came across this issue!! I am triggering the config engine from back and and trying to pick up a model but it has multiple devl_project_id's. :(
    I could see multiple DEVL_PROJECT_ID for the same model in CZ_DEVL_PROJECTS Table. Apart from DEVL_PROJECT_ID and created_by_date every thing looks the same.
    Below are the 2 records the data from the table
    select * from CZ.CZ_DEVL_PROJECTS where product_key = '122:17056' and DEVL_PROJECT_ID in (12943,15321)
    DEVL_PROJECT_ID     NAME     ORIG_SYS_REF     CREATION_DATE     LAST_UPDATE_DATE     PERSISTENT_PROJECT_ID     MODEL_TYPE
    12943     ASI XXX MODEL(122 17056)     OPTIONAL:122:17056     12/18/2012 10:01     12/18/2012 10:01     11100     A
    PRODUCT_KEY     ORGANIZATION_ID     INVENTORY_ITEM_ID     BOM_CAPTION_RULE_ID     NONBOM_CAPTION_RULE_ID
    122:17056     122     17056     802     801
    15321     ASI XXX MODEL(122 17056)     OPTIONAL:122:17056     12/26/2012 23:10     12/26/2012 23:10     11100     A     
    122:17056     122     17056     802     801
    Thanks in advance,
    -vijay

    It can be possible to have multiple devl_project_id for the same model in cz_devl_projects Table.
    Case -1 : When you delete the existing model and re-import again.
    case 2:
    When you publish the model locally, it will create the same copy of the record with different devl_project_id, creation_date, last update_date etc..\
    You can see that for published records the last_updat_login, checkout_user will be null and for the original model, last_update_login,checkout_user (if model is locked) will not be null.
    -Murali
    Edited by: 907569 on Jan 8, 2013 10:55 AM

  • Under Options , Applications There are multiple entries for the same item (Acrobat Document). how can I delete the duplicates?

    Under Options, Applications there are multiple entries for the same item. (Adobe Acrobat) . Three show Adobe Acrobat Reader 9.3 and the other shows (ask) or (save file) with no ability to select Acrobat Reader . Is there a way to edit this list to remove the duplicates and
    the incorrect entry? Adobe installed a very quick update today.

    They are all different. Hover your mouse pointer over each of the "Content Type" descriptions and you should see a "tooltip" to see that each has a different description.
    You need to update your plugins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
    * Adobe Shockwave for Director Netscape plug-in, version 11.5 (you '''<u>may</u>''' need to update)
    * Shockwave Flash 10.1 r53
    * Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
    #Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
    #*'''Note: plugin check page does not have information on all plugin versions'''
    #'''Update Shockwave for Director'''
    #*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
    #*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
    #*When the download is complete, exit Firefox (File > Exit)
    #*locate and double-click in the installer you just downloaded, let the install complete.
    #*Restart Firefox and check your plugins again.
    #*'''<u>Download link and more information</u>''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
    #'''Update Shockwave Flash'''
    #*Use Firefox to Download and SAVE to your hard drive from the link in article below
    #*SAVE to your Desktop so you can find it
    #*After download completes, close Firefox
    #*Click on the file you just downloaded and install
    #**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
    #**Note: Most browsers other than IE will also get updated with this one download
    #**Note: To update IE, same procedure '''<u>but use IE</u>''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
    #*After installation, restart Firefox and check your version again.
    #*'''<u>Download link and other information</u>''': https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
    #* Also see: http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
    #* Also see (if needed): http://kb2.adobe.com/cps/191/tn_19166.html#main_Uninstall
    #'''Update Java:'''
    #* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox

  • Multiple Scopes for the same subnet with Cisco CNR

    I have a requeriment from my internal client that he wants to have  multiple scopes within the same /21  subnet , but he wants to have different scopes for each group of servers ( in the /21 subnet).
    We have 2 Cisco CNR ( I dont know the version they are running because they are managed by an external vendor) but they are in active / standby mode.
    My question is .. it is posible to make the CNR have different scopes (ranges of IP's) for the same subnet ( /21) and assign those based on the client ( I dont know what criteria can be followed .. maybe Mac Address ???).
    I appreciate any help or pointing to the right documentation
    Thank you in advanced

    I don't know that you would want a separate PO print. You can print the same PO print twice to provide a copy for the freight vendor. I think it should be okay as long as it is clear that the PO is with the vendor for the products but there is a condition specifying the freight deal. The second vendor (say the freight vendor) should be okay with this PO as well. I don't remember how the standard SAP PO forms handled the vendor condition but it should be enough I would think. I never came across a separate PO for freight since it is usually an value added service that is an integrated part of shipping goods and the paper-work usually is leveraged from PO, bill-of-lading, etc. SAP will make it difficult if you do need a separate PO since there is no way to use account assignment to material and therefore would need to manually account code and invoice verification, post to a clearing account in FI for re-class to material or charge to internal order with settlement to material or something like this.
    I would just make sure that the PO print makes sense in terms of being able to see the freight charge and maybe the vendor name or something (look at the standard SAP PO form to see what the best practice is).

  • Last summer I bought a music album from iTunes. I've already transferred all my orders from my units, but somehow iTunes wants me to pay for the same album again. When I try to add it to my wish list it simply tells me that I've already bought that item.

    Last summer I bought a music album from iTunes. I've already transferred all my purchases from my units, but somehow iTunes wants me to pay for the same album again. When I try to add it to my wish list it simply tells me that I've already bought that item.
    And I've already tried to search for downloadable purchases.
    So fact is established, I've purchased this album before but iTunes does not recognize it.
    What to do?

    Hey sorry for the late response but I've been out of town.  I can copy and paste the email responses if necessary or desired, and if it's fixed already this is a moot point anyway, but basically they kept asking me for the order numbers for the two songs I already bought from the specific album I was trying to complete, which I eventually gave them - along with telling them multiple times that the Complete My Album feature wasn't working for ANY album.  They gave me two free song codes to compensate me for the two songs I bought, and then told me to go and buy the album at full price, but the ENTIRE TIME they COMPLETELY ignored that I was telling them that this wasn't an issue with one album but was a larger, seemingly systematic issue that other people were experiencing.  Even after I got the song codes I emailed them back and said AGAIN that this wasn't an isolated feature, and they just sent me the link to the apple Feedback page (http://www.apple.com/feedback/itunesapp.html) and told me to submit my complaint there.  So, technically, my issue was never really "resolved," in that they never fixed the Complete My Album feature that I am aware of - or even acknowledged that anything needed fixing, but I haven't tested it since Sunday.
    If it's working for you, then hopefully they fixed it!  I've noticed they've updated to 10.4.1, but the notes don't indicate they're fixing anything about the Complete My Album feature, so I don't know.

  • How to create multi garnishment order for the same garnishment document

    Hi,
    Can anyone tell me how to create multi garnishment order for the same garnishment document. I tried to copy the entry in IT0195 but the sequence field is grayed out so it will just delete the old record. What configuration should I do to make this possible?
    Thanks a lot in advance.

    hi,
    As far as I got it.
    You cannot have multiple Garnishment order but if a need arises you have to maintain it in IT216.
    For that follow this path goto PA30->pernr->194->change->Garnishment->adjustment.
    Since like order you cannot maintain adjustment also directly.
    Regards,
    Amit
    Reward all helpful replies.

  • Can we get a output in different languages for the same configuration

    Hi All,
    Can we get a output in different languages for the same configuration done in NACE. or it is language specific.
    They have symbols which have values both in german and english. But when we run the transaction we are getting the output only in german language.We want the out put in english
    language.
    Thanks in Advance.
    Rajesh

    A Smartform can be maintained in many languages other than the language that it is created. Translations for the texts have to be maintained for this purpose.
    To maintain the translations:
    Go to transaction SE63 in R/3.
    Go to menu Translation->R/3 Enterprise->Other Long Texts
    Select the object type in the pop up. Smartform(SSF) object type is found under Forms and Styles(FS).
    Enter the name of the Smart form and choose the source and target language. This would open a screen with the Smartform code in Source language on the top and an editor with the same code in the bottom.
    Find the text for which you need to maintain the translation and insert the translation in that place. As usual after required texts are maintained Save and Activate.
    To see the translated Smartform create an output type and assign the smartform and the driver program to this output type. In the transaction that sends output to this smartform, select the output type and select the language in which the smartform has to be displayed (translations have to be maintained in this lanuage).This will give the smartform in the required language.
    Madhavi

Maybe you are looking for