Copying a flash file and pasting into another one...

I want to copy a .swf file I have and paste it into another one, frames and all.  I have tried but nothing gets copied over correctly.  Either that or my buttons are on a single frame.. and no longer act like a button with the -Over-Up-Down-Hit frames.  Can this be done? please help...
Thanks Guys,
-Dedikation-

Select all of the timeline frame, right click the selection and choose Copy FRames.  In the other file, Insert -> New Symbol -> MovieClip... etc...  select the one keyframe in the empty movieclip's only layer, right click the selection and choose Paste Frames.  All layers and frames should paste in as they were copied.

Similar Messages

  • Copy all subform data and paste into another subform

    Need: I would like to have a button within a subform that allows you to copy all the data (many fields) and then paste it into an empty copy of the subform. Of course the info pasted would fill in all the fields etc.
    Reason: We routinely need to move subform data from page 3 in the document to page 11 (example). Currently we insert a new subform and copy/paste each field from 3 to 11 and then delete 3. It would be great to press a copy button in 3 and insert a new subform and paste.into 11.
    Is this possible?

    Steve's advice is good if this is a runtime question - how a user, filling out a form, can copy data from one section of the form to another.
    If this is a buildtime question - how a developer can duplicate a subform to be used elsewhere in the same form or in a different form, you have the following options:
    Duplicate and move. For one off tasks, select the subform in the Hierarchy pallet, and click Ctrl-D. This creates a copy of the subform, with all its contents, which can then be dragged in the hierarchy to its new position.
    Cut and paste. For one off tasks, select the subform in the Hierarchy pallet, and click Ctrl-C. Select the new position in the Hierarchy and then in the Design View (it seems odd to select the same object twice in different pallets, but this is required for the copied subform to be pasted into the right place). Click Ctrl-V
    Fragment. When the exact same subform is going to be used several times in the same and different forms, create a fragment by selecting the subform in the Deisgn View and drag to the Fragment Library pallet. This creates a fragment XDP file. By dragging the fragment onto forms, you are creating links back to the fragment XDP file. Change the fragment and next time you open a form in Designer it will inherit the changes. Fragments cannot be customised for a specific form.
    Common Object. Similar to fragments, you create a common object by selecting the subform in the Deisgn View and drag to the Object Library pallet. The difference is that when you drag a common object onto a form, it is inserting a copy of the subform. The inserted subform is not linked to the common object and so it can be customised for that form and will not inherit changes to the common object.
    Ben Walsh
    www.avoka.com

  • Why when I copy a cell and paste into another it pastes into the middle of three cells?

    Why when I copy a cell and paste into another it pastes into the middle of three cells? I was very fond of using numbers as it was straightforward and much better than Excel. But I made the mistake of installing Mavericks and Numbers 3.0. Now it is worse than Word at doing what it thinks it wants to do rather than what you want to do. I can no longer copy a cell and paste it into another. For some reason on pasting, instead of pasting into just one other cell it pastes into the middle of three cells - what the ****?

    Thanks Badunit for your quick response
    I have found the answer - it is a incompatabilty between CopyPaste Pro and Numbers: -
    Thanks dbg1596 - solved my problem with which I wasted a good couple of hours getting more and more frustrated with numbers 3.0
    I had the same problem - copy a cell - paste into another cell and it created three vertical cells with the pasted data in the middle
    Definitely a problem between CopyPaste Pro - one of the most useful aps on my Mac for the last many years
    Once I quit CopyPaste Pro - no problem with pasting in Numbers 3.0
    But I use CopyPaste Pro all the time
    Have the folks responded to your query?
    But I use CopyPaste Pro all the time - hope that it can be sorted sooner rather than later

  • How to read from one file and write into another file?

    Hi,
    I am trying to read a File and write into another file.This is the code that i am using.But what happens is last line is only getting written..How to resolve this.the code is as follows,
    public String get() {
         FileReader fr;
         try {
              fr = new FileReader(f);
              String str;
              BufferedReader br = new BufferedReader(fr);
              try {
                   while((str= br.readLine())!=null){
                   generate=str;     
              } catch (IOException e1) {
                   e1.printStackTrace();
              } }catch (FileNotFoundException e) {
                   e.printStackTrace();
         return generate;
    where generate is a string declared globally.
    how to go about it?
    Thanks for your reply in advance

    If you want to copy files as fast as possible, without processing them (as the DOS "copy" or the Unix "cp" command), you can try the java.nio.channels package.
    import java.nio.*;
    import java.nio.channels.*;
    import java.io.*;
    import java.util.*;
    import java.text.*;
    class Kopy {
         * @param args [0] = source filename
         *        args [1] = destination filename
        public static void main(String[] args) throws Exception {
            if (args.length != 2) {
                System.err.println ("Syntax: java -cp . Kopy source destination");
                System.exit(1);
            File in = new File(args[0]);
            long fileLength = in.length();
            long t = System.currentTimeMillis();
            FileInputStream fis = new FileInputStream (in);
            FileOutputStream fos = new FileOutputStream (args[1]);
            FileChannel fci = fis.getChannel();
            FileChannel fco = fos.getChannel();
            fco.transferFrom(fci, 0, fileLength);
            fis.close();
            fos.close();
            t = System.currentTimeMillis() - t;
            NumberFormat nf = new DecimalFormat("#,##0.00");
            System.out.print (nf.format(fileLength/1024.0) + "kB copied");
            if (t > 0) {
                System.out.println (" in " + t + "ms: " + nf.format(fileLength / 1.024 / t) + " kB/s");
    }

  • Hi, extract data from xml file and insert into another exiting xml file

    i am searching code to extract data from xml file and insert into another exiting xml file by a java program. I understood it is easy to extract data from a xml file, and how ever without creating another xml file. We want to insert the extracted data into another exiting xml file. Suggestions?
    1st xml file which has two lines(text1.xml)
    <?xml version="1.0" encoding="iso-8859-1"?>
    <xs:PrintDataRequest xmlns:xs="http://com.unisys.com/Anid"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://com.unisys.com/Anid file:ANIDWS.xsd">
    <xs:Person>
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://com.unisys.com/Anid file:ANIDWS.xsd">
    These two lines has to be inserted in the existing another xml(text 2.xml) file(at line 3 and 4)
    Regards,
    bubbly

    Jadz_Core wrote:
    RandomAccessFile? If you know where you want to insert it.Are you sure about this? If using this, the receiving file would have to have bytes inserted that exactly match the number of bytes replaced. I'm thinking that you'll likely have to stream through the second XML with a SAX parser and copy information (or insert new information) as you stream with an XML writer of some sort.

  • Extract data from xml file and insert into another exiting xml fil

    hello,
    i am searching extract data from xml file and insert into another exiting xml file by a java program. I understood it is easy to extract data from a xml file, and how ever without creating another xml file. We want to insert the extracted data into another exiting xml file. Suggestions?
    Regards,
    Zhuozhi

    If the files are small, you can load the target file in a DOM document, insert the data from the source file and persist the DOM.
    If the files are large, you probably want to use a StAX or SAX.

  • Can anyone help me write a code about coping data from many files and paste them to one file !?

    Hello ! 
    As I said in title , I have alot files (e.g. 60 files) and I want to write a code to copy 5 columns (for examples) of special sheet of files and paste them in one file respectively. For perceive it I explained it more below .
    Suppose one of my files is simplified as this : http://s000.tinyupload.com/?file_id=00699705919876414523
    The name of  this file is 2006Oct and assume my excel files are like "2006Oct, 2006Nov,2006Dec,2007Jan ... 2010Dec". At first I should go to "my files" sheet of 2006Oct file and copy columns " A,B,C,D,E,F " that has "PerturbationNumber=1"
    respectively and then paste these to a file that is output file and repeat this process for the other files ( 2006Nov and etc ) and paste data in output file sequentially. 
    I appreciate and look foreward for any help in this issue.
    Majid

    Try code below
    Sub CombineBooks()
    Dim wb As Workbook
    Dim sourceSht As Worksheet
    Dim destSht As Worksheet
    Set destSht = ThisWorkbook.Sheets(1)
    destSht.Cells.Clear
    FolderName = "C:\temp\test\"
    file = Dir(FolderName & "*.xlsx")
    firstSht = True
    Do While file <> ""
    Set wb = Workbooks.Open(Filename:=FolderName & file, ReadOnly:=True)
    Set sourceSht = wb.Sheets(1)
    With sourceSht
    sourceLastRow = .Range("A" & Rows.Count).End(xlUp).Row
    If .Cells.AutoFilter Then
    .Cells.AutoFilter 'turn off autofilter
    End If
    .Cells.AutoFilter Field:=6, Criteria1:="1"
    If firstSht = True Then
    Set copyRange = .Range("A1", .Range("E" & sourceLastRow)).SpecialCells(xlCellTypeVisible)
    destSht.Range("F1") = "FileName"
    firstSht = False
    destNewRow = 1
    Else
    Set copyRange = .Range("A2", .Range("E" & sourceLastRow)).SpecialCells(xlCellTypeVisible)
    destNewRow = destSht.Range("A" & Rows.Count).End(xlUp).Row + 1
    End If
    copyRange.Copy Destination:=destSht.Range("A" & destNewRow)
    LastRow = destSht.Range("A" & Rows.Count).End(xlUp).Row
    If destNewRow = 1 Then
    destSht.Range("F2:F" & LastRow) = file
    Else
    destSht.Range("F" & destNewRow & ":F" & LastRow) = file
    End If
    End With
    wb.Close savechanges:=False
    file = Dir()
    Loop
    End Sub
    jdweng

  • Why can I not copy text from a file and paste into "File Name" when saving?

    I thought I used to do this but I cannot copy a string of text from within AI (CS5, CS6 or CC) then "save as" and paste into the "file name" field. Why would this be?
    This proceedure works fine in Photoshop.
    Mac OSX 10.7.5.

    I am copying the characters not the object. Something seems to have changed at the system level. I can paste the text to other applications (Skype, Word, etc.) but not the "Save" dialog. I have been pasting the text to a Skype message window and re-copying. Then it will paste into the save dialog. Weird.
    I see you are on 10.6.8. Maybe it's a system difference.

  • Using Photoshop scripting copy a layer and paste into another document at a particular selection

    I want to copy a layer of a document and paste it into another document in the particular layer selection..

    Thanks Badunit for your quick response
    I have found the answer - it is a incompatabilty between CopyPaste Pro and Numbers: -
    Thanks dbg1596 - solved my problem with which I wasted a good couple of hours getting more and more frustrated with numbers 3.0
    I had the same problem - copy a cell - paste into another cell and it created three vertical cells with the pasted data in the middle
    Definitely a problem between CopyPaste Pro - one of the most useful aps on my Mac for the last many years
    Once I quit CopyPaste Pro - no problem with pasting in Numbers 3.0
    But I use CopyPaste Pro all the time
    Have the folks responded to your query?
    But I use CopyPaste Pro all the time - hope that it can be sorted sooner rather than later

  • How do I copy image from web and paste into Open Office Document

    Whenever I choose Copy Image from Safari and then paste into open office, I only get the image url and not the image. I am sure that I am not selecting Copy Image Address.
    When I copy images from my iTunes album artwork and paste into open office it works fine.
    Any thoughts?

    I have done the same thing using Firefox and it works just fine. It seems to be an issue with Safari.

  • How can I copy a web image and paste into iMessages?

    I have recently purchased a new iPhone that uses the iOS7.  Previously, I was able to copy images from the web and paste into iMessages.  When I try this now, all that is pasted is the link.  Is there a way around this?

    When I tap and hold the image, I don't see an option to "Save" it.  I get the following options:
    Open, Open in New Page, Add to Reading Lisa, and Copy.  When I choose "copy and then go to paste it, it just pastes the web link as you mentioned.  Am I missing something?
    (Thanks for your response, by the way)!

  • Copying from one arrangement and pasting into another arrangement

    Hi, I'm using Logic Express 8.
    I'm wondering if there is a way to copy several tracks from one arrangement window into another. I've tried to do this simply by copying and pasting, but when I paste into the new arrangement window I get error messages and the tracks pasted into the new window have a speaker icon with an "X" through it - and obviously no sound.
    Am I missing something, or perhaps this is simply a limitation that exists with using express instead of pro?
    Thanks a lot.

    You can do this by simply importing the data from one project to your new one. Check it out here.

  • Know any reason why color swatch coverts to black when I copy and paste into another document?

    I keep having issues when I copy and paste a table from one document to the next. Some of the PMS ink colors convert to black. Anyone have a clue?

    In colors in the table or elsewhere in the file? Are you using table or cell styles? If so, did you define new ones or redifine the defualts? The general principle to remember when moving content from file to file is that anything like styles or swatches that appear with the same name in both documents will use the definition from the receiving file.
    Anothe possibility, though less likely, is that you've used the ink manager to alias the spot color to black.

  • Applescript to copy cells from excel and paste into numbers

    Hi  community!  I find myself needing your assistance once again.  I'm new to applescript and it's my first scripting language.  I'm trying to create a script that will copy a block of cells in an excel spreadsheet with multiple sheets and paste that info  (preferably with a keystroke) into a numbers template.  I've written a successful script to activate Excel, go to the sheet with the info, copy it, then open a Numbers template from My Templates.  The problem I can't solve on my own is how to select the right cell on the right table on the right sheet and Paste and Match Style.
    Some helpful info:
    -I've changed my [Command+V] keystroke in Numbers to "Paste and Match Style" because this is a very common action for me
    -The Numbers template is pretty big, but does open on the correct sheet for the paste
    Here's what I have so far: (sorry for the center justification, but it wasn't displaying correctly)
    tell application "Microsoft Excel"
      activate
      set myActiveWook to "OG3.9.xls"
      select worksheet "Blank1"
      select range "E8:E32" of worksheet "Blank1"
      tell application "System Events" to keystroke "c" using command down
      tell application "Microsoft Excel"
      select worksheet "Inputs"
      end tell
      tell application "Numbers"
      activate
      set the templatenames to the name of every template
      set thistemplatename to "PQ10a" as string
      make new document with properties ¬
      {document template:template "PQ10a"}
      end tell
    end tell
    From here I was trying this, but couldn't get it to work.  it would paste the data the first time into the script editor, then in the middle of the template if run a second time. 
    tell application "Numbers"
      activate
      set the templatenames to the name of every template
      set thistemplatename to "PQ10a" as string
      make new document with properties ¬
      {document template:template "PQ10a"}
      tell table "10" of sheet "INPUTS" of document 1
      set selectrange to cell "B2"
      tell application "System Events" to keystroke "v" using command down
      end tell
    end tell
    +
    Thank you in advance for your help. 
    Ash

    Hey Priya,
    The best way to do this would be by utilising the Excel Import Wizard. These help files provide a thorough explanation into their use: 
    http://zone.ni.com/reference/en-XX/help/370859J-01/gfsexcel/gfsexcel/dlgexcimp1_dialog/
    http://zone.ni.com/reference/en-XX/help/370859J-01/gfsexcel/gfsexcel/dlgexcimp2_dialog/
    If you're interested in doing this programatically, this knowledge base article goes through that as well:
    http://digital.ni.com/public.nsf/allkb/C9423530C340B77386256F5E0048F369?OpenDocument
    Kind Regards,
    Shalimar Ali
    Applications Engineering Intern

  • How to read XML file and write into another XML file

    Hi all, I am new to JAVAXML.
    My problem is I have to read one XML file and take some Nodes from that and write these nodes into another XML file...
    I solved, how to read XML file
    But I don't know how to Write nodes into another XML.
    Can anyone help in this???
    Thanks in advance..

    This was answered a bit ago. There was a thread called "XML Mergine" that started on Sept 14th. It has a lot of information about what it takes to copy nodes from one XML Document object into another.
    Dave Patterson

Maybe you are looking for