Copying a PageItem to Another Document, When the Color Name Already Exists in the Target Document

(CS5 and ActionScript)
I am trying to copy a PageItem from Document A to Document B.
If the PageItem in Document A has a Color named "MyColor", and that Color already exists in Document B, then when I duplicate the PageItem from Document A to B, a new Color called "MyColor 2" is created in Document B.
What I wanted was for the PageItem to simply take on the deifintion of "MyColor" which was already in Document A.
If you perform this activity manually in the desktop UI, no duplicate color is created and the PageItem recieves de facto the original color values for the original "MyColor" in target document B.
Any ideas?
mlavie

Sorry - mistake crept in. I meant:
I am trying to copy a PageItem from Document A to Document B.
If the PageItem in Document A has a Color named "MyColor", and a Color by that name already exists in Document B, then when I duplicate the PageItem from Document A to B, a new Color called "MyColor 2" is created in Document B.
What I wanted was for the PageItem to simply take on the deifintion of "MyColor" which was already defined in Document B.
If you perform this activity manually in the desktop UI, no duplicate color is created and the PageItem recieves de facto the original color values for the original "MyColor" in target document B.

Similar Messages

Copy function results in Error 1430 when the target path terminal is &ltNot A Path

Hello all.
I'm having a little bit of trouble with the Copy function under LabView 8.2. If I wire <Not A File> to the target path terminal, I get an Error 1430 (The path is empty or relative.) from the Copy File function's error out terminal. According the the manual, wiring <Not a File> to the target path terminal should cause the Copy function to display a dialog box prompting the user to select a file.
I've attached a sample VI which demonstrates this issue. Is the documentation for the Copy function incorrect, or is something I'm doing wrong in my VI causing the error?
Thanks,
Mark Moss
Attachments:
copy.vi ‏16 KB

Hi Mark,
Thanks for bring this to our attention. I believe the documentation is incorrect here, as you suggested. When nothing is wired to the target path terminal, it behaves as expected (prompting the user to select a target directory).
I will look into this further and report this issue to our LabVIEW documentation team.
Sam
-Sam F, DAQ Marketing Manager
Learn about measuring temperature
Learn how to take voltage measurements
Learn how to measure current

When deleting messages I get this message:"74608.emlx" couldn't be copied to "Messages" because an item with the same name already exists. How can I fix this problem?

When trying to delete messages in mail, I've been getting this message:“74608.emlx” couldn’t be copied to “Messages” because an item with the same name already exists." The numbers at the beginning are always different but the ".emlx" and the rest of the statement is always the same. How can I fix this problem?
Thanks
Candy777

HT2500 Error when deleting email: Apple Support Communities

HT5767 My mail all of a sudden would not allow me to delete messages in my inbox saying, "couldn't be copied to "Messages" because an item with the same name already exists." Found it duplicates the message I wanted deleted in trash.

Still using the @mac.com mail address and up to date on everything, but have not gone to Maverick. All of a sudden Mail wouldn't let me delete. Said that title of email was already in trash. And sure enough it was. Clicking on the help button on the message gets Nothing.
The selected topic is currently unavailable.
The topic you were trying to view could not be found.
"couldn’t be copied to “Messages” because an item with the same name already exists."
Any ideas. My mail is not tied to gmail etc.. just all by it's lonesome.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Spotlight/Finder can't find a file, yet when I search the timecapsule for they find it. If I try to restore the file I get "file with that name already exists...." What is wrong?

I was trying to find a file (iTunes Backup). When using finder/Spotlight they couldn't find the file.
I then opened up my timecapsule and searched for the file....tick-a-de-da it found it in yesterdays backup. I attempted to restore the file and got the prompt "A file with that name already exists in this location, would you like to keep both, replace the file or cancel the request.
So if the file is there why can't spotlight/finder find the file??
If it helps I get this from the terminal when checking if indexing was enabled.
$ mdutil -s -a
Indexing enabled.
/Volumes/Data:
2014-11-18 18:09:39.542 mdutil[1472:572531] Metadata.framework [Error]: mdsCopyStoreAttributes failed: (8) (os/kern) no access
No index.
/Volumes/Time Machine Backups:
Indexing and searching disabled.
/Volumes/Time Machine Backups/Backups.backupdb:
Indexing enabled.

Hi Danielle,
Is there any possibilty that some of your files (a VI or DLL?) have been moved, renamed, or deleted? Also, what version of LabVIEW are you using and are you using any .NET DLLs? Another option to consider would involve VISA or DAQmx property nodes. Are you using any of these property nodes in your code? Here is a KnowledgeBase article to describe more about the VISA and DAQmx property nodes in a source distribution:
Error Creating Source Distributions Involving rc Files: http://digital.ni.com/public.nsf/allkb/833BFD5E9CA0224886257584004DAA4C?OpenDocument
I hope this is able to help.
Anna L
Applications Engineer
National Instruments

Cannot delete read mail. Keep getting the following message "926540.emlx" couldn't be copied to "Messages" because an item with the same name already exists.

I am trying to free up room on my hard drive but keep getting the following message. “926540.emlx” couldn’t be copied to “Messages” because an item with the same name already exists. 926540.emix is the number given to the email I want to delete. This message appears (with a different .emix number) when I try to delete any mail. I have junk mail from 2014 to 2009 that I want to delete

Back up all data. Rebuild the mailbox. Try again to delete the message.

How can I visit the performance tab when the target DB is down?

Hi, All:
I wonder if it is possible to visit the performance tab when the target DB is down. I thought it should be possible. But whenever I first click the performance tab, I will be asked to enter the user/passwd for the target db(I have set the preferred credentials).
Furthermore, is it possible to analyze the history sql/performance if the target db is not startup? and how can I do it?
Thanks in advance

I have seen other postings by the same ID and my suggestion is that you have a look at the Enterprise Manager Documentation Library. After that, you can ask questions relating to subjects you cannot solve with the documentations.
http://www.oracle.com/pls/db102/portal.portal_db?selected=21

"91590.emlx" couldn't be copied to "Messages" because an item with the same name already exists. How do I fix this?

The delete button in Mail gives me this message: “91590.emlx” couldn’t be copied to “Messages” because an item with the same name already exists. The only thin that has changed is an OS update last evening. (Mountain Lion)

Thanks...it was spooky seeing the mail in my box suddenly disappear and blank after going to Mailbox and Rebuild. But "poof" it was up again and was able to delete without the messages telling me it had a duplicate in trash (which it did). Solved the problem.

Messages could not be moved to the mailbox "Trash - "122730.emlx" couldn't be copied to "Messages" because an item with the same name already exists.

Cannot move messages from mail to trash. Get the following message: messages could not be moved to the mailbox “Trash — “122730.emlx” couldn’t be copied to “Messages” because an item with the same name already exists.

I just started having the same problem but have found no solution.

Folder name already exists error when activating feature

HI,
I am creating a document library and adding folders to it using elements.xml in VS 2012.
First time deployment of the item works fine, the folder is created. But further deployment or activation of feature from site features is throwing the error "Folder name already exists".
Below is the elements.xml of List Instance, which was modified to add the folders.
<ListInstance Title="TestLibrary" OnQuickLaunch="FALSE" TemplateType="101" FeatureId="Guid" Url="Lists/TestLibrary" Description="TEST Library List Instance">
<Data>
<Rows>
<Row>
<Field Name="ContentTypeId">0x0120004F994A3C0FF76546A528DA0D4B515898</Field>
<Field Name="FileLeafRef">Test_One</Field>
<Field Name="Title">Test_One</Field>
<Field Name="FSObjType">1</Field>
</Row>
<Row>
<Field Name="ContentTypeId">0x0120004F994A3C0FF76546A528DA0D4B515898</Field>
<Field Name="FileLeafRef">Test_Two</Field>
<Field Name="Title">Test_Two</Field>
<Field Name="FSObjType">1</Field>
</Row>
</Rows>
</Data>
</ListInstance>
How to fix this?
Thanks

Hi,
According to your post, my understanding is that you got “Folder name already exists error when activating feature”.
I had used the following code snippet to create a folder within a document library, it didn’t throw errors when reactive the feature.
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<ListInstance Title="LibTest"
OnQuickLaunch="TRUE"
TemplateType="10000"
Url="Lists/LibTest"
Description="My Lib Instance">
</ListInstance>
<Module Url="Lists/LibTest/Folder1" />
</Elements>
http://shareden.blogspot.com/2012/11/creating-feature-with-image-library.html
Also, when you redeploy the project, it will give you a dialog which would promote to delete the existed list or not.
If you click the “Resove Automatically”, the visual studio would delete the existed list automatically, and create a new list.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Problem when saving files (file already exists-)

Woking in CS5.1.
When I save a document (as opposed to "save as"):
I get a message "some of the specified files already exist in the target location. The files marked below will be replaced".
The file I am working on gets saved, but creates a second version "file name-01.ai"
Any ideas?

Works fine here CS5 on Windows.
When I save, it will warn me only if the file with the same name already exists and if I choose to replace it it will replace the existing file keeping the name I'm saving it with.

Project Server 2010 and Report Builder 3 : the same name already exists

Hi,
I created my first report in Report Builder, and,
although it's not perfect, I tried to save it. But I get the error :
Impossible to save the report "No title.rdl". A file from another type with the same name already exists".
I tried to change the name 5 times but I always got the same error.
Any idea ?
Thanks

Hi WLID,
I have taken a sample test in my environment, it works well. If there is already another type file named “No title” on report server, then it can be saved on report server. If there is already a report named “No title” on report server, then it would prompt
that “An item named ‘http://servername/reportserver/foldername/No title’ already existed. Do you want to replace the existing item?” when we want to save the report in the same folder.
What’s the location that you want to save the report? Is it a report server or others? Could you please provide us more information about the issue? You can try to reopen the Report Builder, then create another simple report to text the issue again.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

SPD 2010 - How to know if a file with a given name already exists in a document library

Hi,
I've created a workflow using SPD. One of the steps in there is changing the name of the document to a clean name. This workflow fails if a document with this same name already exists in my document library. Is there a way to check in a SPD workflow if
a document with a given name already exists in my document library ?
Marc Nemegeer

Hi,
According to your post, my understanding is that you wanted to know if a file with a given name already exists in a document library.
You can use a SharePoint Designer workflow to achive it.
To test to see if a document exists, you need to use condition:
If Current List:Name equals [%Current Item:Title%].docx
Here is a similar thread for you to take a look at:
http://social.technet.microsoft.com/Forums/en-US/cc227020-ce81-4c08-aee0-a66789d8ad05/test-to-see-if-document-exists?forum=sharepointcustomizationprev
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How can i change the settings so that before download the firefox gives a propmt that same file name already exists, instead of automatically renaming duplicate files by adding .1 suffix?

When I download a file, if a file of similar name already exists in the same download folder, the firefox downloads the file and renames it by adding numeric .1 to the file name.
I want the firebox to give me a prompt that similar file already exist, rather than automatically renaming it by adding suffix .1.

Downloads Options
* https://support.mozilla.com/en-US/kb/Options%20window%20-%20General%20panel#w_downloads
Unable to Download or Save files
* https://support.mozilla.com/en-US/kb/Unable%20to%20download%20or%20save%20files
Check and tell if its working.

A workflow with the same name already exists.

Hi, whenever I am trying to create a workflow in my MOSS teamroom, I am getting the error "A workflow with the same name already exists". I am getting this error message no matter what name I give. I checked all the lists and document libraries to see if there are any workflows but that doesnt seem to be the case. I opened the site in SPD and there also no workflows are listed.
Any insight will be appreciated.xwindow

I know it is a bit outdated but someone might found this helpful:
The other possible problem could be that the SPD lost connection with the Sp site for a sec but on the local machine there is a workflow with that name. ( In this case if you try to rename your workflow it gave you the same error message )
So have a look in SPD click on All files then select Workflows and delete the workflow that is causing the problem.
After this exercise you will be able to rename or re save your Workflow.

Copying a PageItem to Another Document, When the Color Name Already Exists in the Target Document

Similar Messages

Maybe you are looking for