Copying a Site WebPage Using The IPad?

Is there a way to copy a page from a website using the IPad? I can't figure it out. I'm trying to go to my website and want to copy one of the pages there to send to someone, but when I put my finger on the page I don't get the usual "copy, paste, select all, select," I get nothing. Is there a way to do this?
Thanks for the help once again!
Lucind

I just tried iSaveWebLite on an Apple website page. It only copied the the one page. When I viewed that page in the iSaveWebLite app it viewed fine and when I touched a link on that page it said it could not display that page since it was not saved.
lucin wrote:
This app doesn't seem to allow me to copy just one page and that's what I need to do. I don't want the home page I want one page on the site.

Similar Messages

  • I can't read Or write I have been using the iPad With the accessibility icon Is there a video help them teach me how to use it more efficiently

    I cannot read or write I have been using the iPad With the accessibility icon  Is there a video to help teach me To learn how to use this accessibility more efficiently

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • Syncing downloaded movies from itunes to ipad which then suddenly stops and will not finish the sync stating itunes could not copy  "name of movie" to the ipad because the file could not be written. restored the ipad to factory settings, reinstalled itune

    I have had to format my PC running windows 7, and reset my ipad 1 to factory settings, i then installed latest itunes on the PC authorised the PC and re downloaded several movies via itunes previous purchases, all was well until i tried to sync the ipad to the PC, only some of the movies synced onto the ipad, otheres stalled the sync stating itunes could not copy  "name of movie" to the ipad because the file could not be written. I have to pull the plug on the ipad just to get itunes to unfreeze, but it still will not sync these movies. and one help

    Hi
    I was having the same issue with music and movies but it had been ok before. The sync would freeze on a random file and then i had to take out the USB cable to clear it. After trying all sorts of things i saw someone mentioning about Anti virus and firewalls. I am using McAfee so i disabled it as a test. After this i could sync music and movies without issue!!!!! So in my case the firewall/anti virus was causing a problem. McAfee updates itself a lot so I am guessing something has happened in a recent update that impacted iTunes.I am not sure if this kind of thing is also causing your problem but it sounds very familiar.
    Hope this helps.

  • Using the iPad as a signature pad

    We would like to use an iPad as a signature pad for a document on as desktop computer.  I've researched several apps but they all seem to want the document on the iPad but we will need to have the document on the desktop computer.  We would like to be able to connect the iPad through its cable and use the iPad as a signature pad for the document(s) that require a signature.
    These are work computer computers running Windows 7 and Windows 8.
    Thanks in advance for any help you can provide.
    V/R
    George King

    Could you put the document on an internal web site?
    Set  up a web server on the pc.
    Web solutions.
    http://en.signotec.com/portal/meldungen/use-your-iphone-ipad-or-android-tablet-a s-a-signature-pad-now--900000275-10002.h…
    http://stackoverflow.com/questions/3096470/capture-signature-using-html5-and-ipa d
    You could crank up a screen sharing app on the pc which the ipad could access.  Use can then sign document.
    I'm drawing a blank.  What were the names of those tablets you could use to draw on as input devices to computers?  Could look for such an app in the app store.
    Robert

  • The Wifi storage options are interesting but it seems they only allow to read files from the device on the iPad but not transfer files to the storage device via WiFi.   I'm looking for a possibility to use the iPad for photography while traveling, without

    the Wifi storage options are interesting but it seems they only allow to read files from the device on the iPad but not transfer files to the storage device via WiFi.
    I'm looking for a possibility to use the iPad for photography while traveling, without the access to a computer.
    Shooting photo's in RAW format crates pretty big files that will fill up the iPad's memory pretty fast if you shoot a lot during a (let's say) month long trip.
    my idea was to use load the photo's to the iPad so i could view them and sort out any bad ones. then copy them over to the storage device so i can continue using my CF cards for shooting. I have an image thank for copying the photo's directly to the HDD but it would be so sweet to be able to check them on the iPad before hand.
    any suggestions?

    Check out pogo plug device, it allows you to upload camera roll via wifi.

  • Hi, we are a small clinic that uses the iPads for therapy. If we purchase an app for one iPad, can all of them download the same app at no additional cost?

    Hi, we are a small clinic that uses the iPads for therapy. If we purchase an app for one iPad, can all of them download the same app at no additional cost?

    Allan was somewhat incomplete in his statement. While technically it would be possible, from a licensing standpoint you need one license for each iPad unless those iPads were all going to be used by the same person (which I think unlikely given your described use). Here are the relevant terms of the iTunes Store agreement (emphasis mine):
    "(ii) If you are a commercial enterprise or educational institution, you may download and sync an App Store Product for use by either (a) a single individual on one or more iOS Devices used by that individual that you own or control or (b) multiple individuals, on a single shared iOS Device you own or control. For example, a single employee may use an App Store Product on both the employee's iPhone and iPad, or multiple students may serially use an App Store Product on a single iPad located at a resource center or library. For the sake of clarity, each iOS Device used serially by multiple users requires a separate license."
    So you would legally need to purchase one copy of the app for each iPad, something which would require an iTunes Store account for each iPad. For normal purchases, each iTunes Store account would need an associated credit card or prepaid iTunes card.
    The Volume Purchase Plan works similarly - you still need one license and one iTunes Store account for each iPad - but the purchasing is centralized so you don't get billed multiple times. You get one recemption code for each license you purchase. See:
    http://www.apple.com/business/vpp/
    Regards.

  • How do i Transfer photos from my ipad to SD Card using the Ipad photo kit

    How do i Transfer photos from my ipad to SD Card using the Ipad photo kit

    I don't think you can directly transfer pictures from your iPad to an SD card using the photo kit.  If you have Windows PC  (with USB port), connect it to you iPad using the Apple Dock Connector to USB Cable. After connecting, open Windows Explorer on your PC and you'll notice that one of the icons is your iPad (as an external drive).  Click on the iPad icon, then Internal Storage, then DCIM. Once you open the DCIM folder, youll see a bunch of folders in it (just like the one below) - that's were your pictures are stored. You can copy and paste these folders (or the files inside them) to you PC or if your PC has an SD Card slot (with card in it), you can copy them there as well.
                                                                                 Apple Dock Connector to USB Cable

  • When using the iPad 2 to browse the National Weather Service the embedded Google map can not accurately point to the correct location when tapped.  Is there a solution?

    For example, using the iPad to check various locations around Davis, ca on the NWS website, the embedded google map is grossly off location.
    http://forecast.weather.gov/MapClick.php?CityName=Davis&state=CA&site=STO&textFi eld1=38.545&textField2=-121.739&e=1
    Then, using the ipad, if I tap on Sacramento, I get a location to the southeast near Angel's Camp.
    This problem occurs also on embedded map at summitpost.org.  Same problem (Also a Google map).  Tap on a point and it displays info of an area off of where I was looking.
    Thanks!
    -vernon
    Same problem with iPhone.  Use to work with an earlier version of Operating System.

    The website may alter its page display based on the browser ID that is transmitted to the site from your browser. Some browsers on the iPad like iCab allow you change the browser ID to something desktop-oriented. Safari does not provide this capability.

  • The "Apple ID Password box along with the keyboard keeps popping up on my iPad and stays there.  I have changed my email address on my iMac but my old one still remains on the iPad.  Also changed password.  Nothing works!  I can't use the iPad like this!

    The "apple ID Password" box along with the keyboard pops up when I turn the iPad on and it stays there.  I have changed my email address on my iMac and also changed my password.  The old email address is still on the iPad.  Anyway, I can't use the iPad because can't get the apple id password box to go away.  Thanks for any help!

    This is an older photo but the sleep and home buttons are still in the same place on all iPads. The home button is the round button at the bottom of the iPad and the sleep button is also called the on/off button and it is at the top right corner of the iPad.

  • I don't have a wireless printer, and want to print things off of my iPad.  I know that I can use the iPad Camera Connection kit to connect USB devices like keyboards and I am wondering if I could do the same with a USB printer.

    I don't have a wireless printer, and want to print things off of my iPad.  I know that I can use the iPad Camera Connection kit to connect USB devices like keyboards and I am wondering if I could do the same with a USB printer.

    I don't think you can connect a printer since you won't have the printer drivers. I use FingerPrint from collobos.com to print to my non-AirPrint printers.

  • I want the phone version of my site to use the same url as the desktop version. How can I do this without the "phone" extension in the url?

    How do I get the phone version of my site to use the same url as the desktop version -- without the "phone" extension.  when someone posted a link to my site, they posted it from their phone and it included /phone. Now when people click on it - - it goes straight to the phone version of the site.

    Please refer to similar post here :
    https://forums.adobe.com/thread/1577934?sr=inbox
    Thanks,
    Sanjit

  • I want to use multiple iPads as external monitors from a PC using the iPad VGA adapter (wired)

    I want to send a VGA signal to a couple of iPads using them as monitors. I currently use a pair of regular 13" VGA 1024x768 lcd monitors looping thru an LCD projector displaying the same signal sent to the projector.
    I want to use the iPad VGA adapter and WIRE them in just like a convention LCD monitor. Yes there are apps like air display and others but they don't allow cloning and have latency issues and must be networked. I need an app to use the VGA adapter and actually wire them in using a VGA signal from my existing VGA distrubution amp.
    The size of the iPad is perfect for my application however I cannot find an app to let me send a signal into the iPad via VGA adapter.
    Any ideas?
    thanks,
    the Sherm

    http://www.shapeservices.com/en/products/details.php?product=idisplay&platform=i phone
    Cool ... takes on all of the complex-ip-aliasing to turn the Mac into the center wi-fi a screen share netork 

  • I created one apple I'd when I started using the iPad.  After some days, I had to create a new apple I'd as there was some problem with the first one. Now at some places still my old apple I'd is appearing.  Pls adv how I change this to my new apple Id.

    I created one apple I'd when I started using the iPad.  After some days, I had to create a new apple id
    as there was some problem with the first one. Now at some places still my old apple Id is appearing.  Pls adv how I change this to my new apple Id.

    Anything you downloaded with the first Apple Id will forever be tied to it, and will always require it to update.
    The question here is, why did you think you needed to create a new Apple ID? What was the problem with the first one?
    To get rid of th old one, you'll need to delete everything you downloaded with it, and then sign out of the ID in several places around the iPad. 
    Go to Settings->iTunes & App Stores->Apple ID->Sign out.
    Repeat the process, for Facetime, Messages, Mail and any other App you need to sign out of.

  • Is there a way to tie to iPads together so that when you turn a page with a tap on one, both iPads turn a page.  I am using the ipad to replace piano sheet music.  The challenge is that ordinary sheet music is on both a left and right page.

    We are trying to use an ipad to replace ordinary paper sheet music on a piano.  When truning ordinary paper pages, it is sometimes hard to grasp one page, turn it quickly and get it to stay turned.  The idea with using an ipad is that a tap turns the page, it stays turned.  However,,,,,ordinary sheet music is on both left and right pages.  With one turn you get 2 new pages.  The ipad, being smaller results in only one page and therefore twice as many page turn taps; more taps equals less hands on the piano.  If we could tie 2 ipads together and get them both to turn the page simultaneously it would be nice.  We are trying to get used to using the ipad.  We are using ForScore app to get sheet music into the ipad; we could load one with odd pages and one with even pages.  Maybe this is getting too complicated.
    Anyway to tie 2 units together
    John

    No way to control one device from the other.  But, according to ForScore, you should be able to display two sheets side by side in landscape mode (2-up view)?  Not sure if that helps as it must make the actual print smaller to do so.
    http://www.forscoreapp.com/about/#interface

  • How can i turn off Find My iPad without using the iPad?

    My swipe screen has stopped working completely on my iPad. Very disappointing as it is only 18 months old and has been well looked after! I have tried holding down the off/on button and menu button to reboot but this doesn't work. I have now logged the fault with Apple and have an appointment to see someone in the support team this Monday. However, I wanted to try one more thing. I want to restore to factory settings as I've read that this could resolve the problem. When I plug it in to iTunes and try to restore iPad i get a warning message telling me I need to go to iCloud settings on my iPad and turn off Find My iPad before restoring. As I cannot use the iPad I cant do it from there. Is there another way? Please help me, I want to weep!

    FORCE IPAD INTO RECOVERY MODE (this will disable Find My iPhone)
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

Maybe you are looking for

  • How to upload from iPod Touch to iTunes?

    I lost my Windows 7 hard drive to the 'Virut' virus (NASTY), and fell back to my old Vista drive. When I installed the new version of iTunes, I found it doesn't have all the apps that I have on my iPod? Is there a way to backwards sync, er is that wh

  • I can't download the InDesign trial - Exit Code:6

    Exit Code: 6 Please see specific errors below for troubleshooting. For example, ERROR: -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 2 error(s) ----------- Payload: Microsoft Visual C++ 2012

  • How to use Public variables in other classes

    Please have a look at the program. In the below program, i want to use the variable 'name' in the class cl_airplane1 implementation under the method aircraft to display 'BRITISH AIRWAYS' which i am passing through the object AIR1. The variable 'name'

  • HT4356 Do I need an Internet connection to AirPrint?

    Do I need an Internet connection to AirPrint from an iPad 2, I only have 3G at home and no home broadband. I have been told as long as I have a router and iPad and printer connected to it, it will AirPrint, is that correct?

  • Powerpoint missing files

    I have been working on a Powerpoint presentation for a week, saving it regularly. This morning, Powerpoint crashed during the last save and when I reopened it, it did not give me an autosave document - even though it did an autosave. Then when I went