Copying an environment between servers

I am looking for instructions on copying my production environment to my Development server as an archive environment. Is there a way to use the BPC Administrator to do this or is using the backup/restore process in the BPC server manager (which by the way has issues with backing up the SQL data within the BPC process. a SQL backup from SSMS is necessary) the required process.

Also refer the following SAP Note-"1455212 - Best practices for BPC MS backup".
Go through the following links may be helpful
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20a26f50-4252-2a10-8c97-a2c7058cd804?overridelayout=t…

Similar Messages

Procedure to Copy Database Files Between Servers

I am currently in the process of installing Oracle 9i on a Solaris platform. When this has been completed, I will be attempting to copy two databases from one server (also Solaris) to this server. What is the best way to copy these databases over to the new server?

Hi,
I think this is not the right forum, but, anyway, I can answer you.
You have to physically copy all datafiles, controlfiles, redo log files and init/config files from one server to the other, using ftp, rcp or similar. This operation has to be done after normally shutting down the original Database.
If you can reproduce the same paths as the originals, then the only action you have to do is to STARTUP your DBs in the new server, after setting the ORACLE_SID environment variable.
Otherwise you have to do some changes in the DB configuration.
Paolo

Copy user menus between servers.

I need to copy 12.1 from development to Qa and Prod systems.
How do I copy the menu that I have created in MII, what file contains the menus?
Thanks
Andy

Hi Andy,
By menus, I assume you mean the Navigation Links? If so, under the System Management -> Configurations, export the Navigation configuration and import it into the new system.
Kind Regards,
Diana Hoppe

Copy file between servers, passing on firewall

I'm try copy a file between servers with Windows NT. I mapping the target server to drive X and test copying a file in windows explorer and command window and the files copy is OK. But if I try with a java class don't.
I'm try with FileInputStream (read) and FileOutputStream (write) but don't. I have use the Runtime.exec() for execute a DOS command but don't("cmd.exe /c copy c:\myfile.txt x:\"). this second showme a message "username incorrect or bad password", but the same sentence I run in a command window and the copy is OK!
What can I do?

Hi,
try to use HTTP for the transfer between
the two servers. Normally You can pass the
firewall using HTTP (like browsers do).
Therefor use classes in the java.net packages.
CU,
Mathias

Copy appsets between servers

Hi guys,
I will shortly have to copy an appset between two servers, and the data also.
Please could someone give me a definitive list (Warning: newbie alert!) of what exactly I need to move?
I know I need to backup the appset using Server Manager from the original machine, and Restore it using Server Manager on the new machine, but what if the drive mappings are different between my old (dev) server and my new (live) one?
Presumably, I can backup, move and restore my database too? Or is it not that easy??
Like I said, this is new to me, so I just want to make 100% I don't forget anything!
Thanks folks, I appreciate your help.
Best wishes,
Jason

Dear Jason Maidment,
It's only way to copy appset between server using Server Manager. You right to backup Appset from original machine and restore in new machine. If you restore Appset using Server Manager, SAP BPC will automaticlly restore files, database, and OLAP. I've tried to restore Appset in new machine which the drive mapping is different from original machine and I never get something error.
I hope my information can uses for you.
Thanks,
Wandi

Copy single table between two servers

Hi... I perform a remote copy (SCC9) yesterday, a few months i did another copy and exclude some tables, in the expert setting, now in my copy, we need a table that was excluded in the last copy (yesterday).
Do you know how to copy that table??
Thanks in advance..

Hi
Check this out
[Link1|http://sapbasis-security.blogspot.com/2008/04/copying-tables-entries-between-two.html]
[Link2|http://books.google.co.in/books?id=ASekwAiAXdMC&pg=PA426&lpg=PA426&dq=howtoCopysingletablebetweentwoserversin+sap&source=bl&ots=BS7d2sSz4C&sig=9QWwA7Mlg_7Q6tj_lS4lcMqZz4k&hl=en&ei=T1xVSuTyK6bU6gPh6oXCDw&sa=X&oi=book_result&ct=result&resnum=1]
Regards
Uday

Can I use vCloud Connector Basic to copy vSphere template between datacenters?

A client has 4 datacenters around the world. They use one a couple of vCenter servers in Linked Mode. vSphere/vCenter only, no vCloud.
If they create a VM template at HQ, could they use vCloud Connector Basic to copy the template between DC in different locations?
If so, would this offer anything more than cloning the template to another DC using vCenter?
Thanks,
-MattG

Hi Matt,
You can use vCloud Connector for vSphere environment to copy templates / vms across datacenters that are geographically separated.

Communication between servers on different FIs

Just want to verify communication between UCS servers on same chassis but having active vNICs on different FIs (Diagram attached). I suppose all commuication between server-A & server-B will happen through Layer 2 switch as server-A will generate an ARP request for Server-B, that will be passed over to FI-A and then to L2 switch down to FI-B, where server-B will respond back with it's MAC that will then be passed to Server-A via FI-B to L2 switch to FI-A.I don't expect any traffic between servers A & B be routed via firewall? Is there anything I need to be careful about in this design? Going forward we will have multiple subinterfaces on the firewall for different VLANs and all servers will use Firewall as default gateway.

you may want to look at the throughput of your firewall for server-server traffic in different VLANs. If your L2 switch is 10G but your firewall is only 1G then you could have a potential bottle neck.

Copy and paste between apps not possible in iOS 5, suggestions?

What happened to being able to copy and paste between apps (i.e. copy something I want in Safari and paste in an email or from an Excel attachment to an email)?

i dont know i can no longer copy and paste from safari to evernote

Using Clipmate to copy and paste between projects

Thanks to Robert Johnston for the inspiration (and perspiration) for this method for copying and pasting between PE projects. One residual side effect of the method is that the audio and video of the copied clips will be unlinked. The renaming folders business is a workaround to avoid the silent audio problem after a project has been saved and reloaded.
1. Rename the folders of all audio files (including AVI files) used in the project to be copied.
2. Start PE and load in the project to be copied.
3. When asked, tell PE where the missing files are. (Check the box marked "Display Only Exact Name Matches".) Press Select.
4. Highlight parts (or all) of the project to be copied, in the timeline.
5. Copy the highlighted parts.
6. Copy into Clipmate:
6.1 Edit > Capture Special
6.2 Check both items in the list
6.3 OK
7. Close PE without saving.
8. Rename the folders of the audio files back again.
9. Open destination project in PE.
10. Re-select the copied info in Clipmate (closing the project in PE caused the clipboard to be cleared):
10.1 Select anything in the Clipmate list except the wanted item.
10.2 Select the wanted item (selecting an item loads it onto the clipboard).
11. Position the CTI to the wanted insertion point.
12. Do Edit > Paste Insert.
13. The pasted items will be highlighted in Media Panel. While still highlighted, select the Media Panel and do: Edit > Locate Media.
14. Tell PE where the files are.
15. Save project.

When combining projects, it is best to do your pruning of unwanted clips and other resources BEFORE you combine them, because once the Media Panel gets heavily loaded, PE is liable to crash.
Deleting the unused resources in Media Panel is quite easy in PE3 and PE4. Simply click on the "used" column heading, and the resources will be sorted into two groups of used and unused. Just click on the resource at one end of the unused range and shift click on the resource at the other end to select the whole range, then press delete. (Note that shift works normally in this panel, unlike in the timeline!) However, it is not strictly necessary to delete unused resources before copying and pasting because only resources selected on the timeline will be copied. PE will load and save a lot quicker if unwanted resources are deleted.
My feeling is that PE4 is somewhat more unstable than PE3, but I haven't done a proper direct comparison. For some reason after a crash the autosave often doesn't seem to have done its job properly, even though I set it to save every 10 mins. So make use of the Save button Adobe gave back to us in PE4 and save often, particularly before you use the titler or fiddle with the Media Panel.

I can not copy a transition between multiple clips in premiere 12

Following the procedure described in the manual, I can not copy a transition between multiple clips in Premiere 12.
Premiere copy a single transition in the clip closer to the time bar.
I had tried in various ways but to no avail. The problem can be solved?
Thanks for the help.

Sig. T.T. Romano,
javascript:void(0)
I finally figured out that you can not copy a transition between multiple clips at the same time and it will copy one at a time.
What seems strange, however, because in Pinnacle, which I used until recently, this could be done, and Adobe is not less than Pinnacle.
Maybe Adobe does not consider interesting this thing, or maybe it is inserted in Premiere Pro. How, for example, in the titles, the ability to animate multiple lines. In Premiere Elements missing but I knew that in the Pro's.
I thank you anyway for your helpful answers.
Vincent Chiti

Copy / Paste Styles between objects?

Can you copy/paste styles between different objects in Motion 5?
I know I can save a Style as a name and then select it from the style list. It would be great to just copy a style and then select another object and paste. Can you do this?
Thanks!
Scot

Motion lets you drag and drop parameters on different things. If the action is "not allowed" you won't be able to do it. That said, if you have a rectangle located somewhere on the screen and you want to line up text over the rectangle, just drag the Position parameter of the rectangle onto the text layer in the layers list.
For "like" objects, for instance: shapes, you can drag the Outline and Fill panels (the entire panel!) onto another shape and all of the contained parameters will be copied over. So, if you have a red outlined (say 10 px wide), blue filled rectangle, and you want the same properties on a circle, just drag those panes (click on "Fill" And "Outline") onto the circle.
If all you want to do is save styles of shapes, or text, that you've created, then for shapes, on the Style inspector theres a Shape Style dropdown at the top of the parameters list. Click that and Save Shape Style. Whatever your current settings are, they can be saved and reselected from that menu. For text, at the top of the Style inspector, you'll generally see Normal (in whatever that layers font is.) Click on that bar and select Save All Basic + Style Attributes.
HTH

Copy and paste between user accounts

is there a way to copy and paste between user accounts?

You can drag files to the Drop Box folder in another user's Public folder.

Distributed File System Replication between servers with different performance

If Distributed File System Replication is set between servers with different performance. What will happen with the performance of the fastest server? Will the performance decrease to match the performance of the
slowest server in the chain? I mean, will the source slow down (processor speed) if the recipients can't keep up?

Hi,
If you mix different performance server for DFS replication, most of improvements on the fastest server are disabled for backwards compatibility and the performance decrease to match the performance of the slowest server.
For more detailed information, please refer to the article below:
Tuning replication performance in DFSR (especially on Win2008 R2)
http://blogs.technet.com/b/askds/archive/2010/03/31/tuning-replication-performance-in-dfsr-especially-on-win2008-r2.aspx
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Why does the frame color change to black when I copy and paste between documents?

Copying and pasting between documents in Indesign. The color of the text stays the same but the lines and frames change from a specified color to black. Also changes when I drag and drop can anyone tell me how to fix this?

You have not provided any exact information like what version of ID, system info, paragraph styles, color definitions and whatnot, so we can't know what is going on. either way, ask in the ID forum and provide all those important details.
Mylenium

Copying an environment between servers

Similar Messages

Maybe you are looking for