Copying app between different servers using CopyApp into EPM architectur

Hi,
I have Hyperion Planning System 9.3 EPM arch.
I want to migrate from my dev server to another prod server.
I have used the tool CopyApp without problems in Hyperion Planning System 9.3 not EPM.
Anybody knows if there will be any problem using the tool CopyAPP in EPM arch., or if you have to do some another steps to can migrate with this tool???

I am in the process of copying.
There are some pre-requisties:
Create DSN (planning server)
Create basic planning app in planning using the DSN created
Please make sure you use uppercase for everything before the = sign on copyapp.properties file.
copyapp runs and creates the essbase cubes, rdbms tables.
Also the log files says OLAP data is not copied (need to export/import),
target application will not be registered with HSS nor have it's users provisioned.
At this point I am thinking I need to refresh data in planning, register app in HSS and provision users -

Similar Messages

Copying variants between different servers

Hello All ,
There are 2 servers MSAP and 1SAP ,1SAP is the new implementation that we are doing .MSAP is their previous system .
I have to copy a program from MSAP to 1SAP ,but there are many variants in that .Is there any method i can copy variants between 2 different servers?? coz there are lot of variants in the existing system .
Regards ,
Hemanth .

Hi,
Refer FM's:-
RS_VARIANT_CONTENTS or
RS_VARIANT_ADD or
RS_VARIANT_CHANGE.
Also you can refer thread:-
Re: Copying Variants
Hope this helps you.
Regards,
Tarun

Copy data Between different servers.

Hello Floks!
I´m trying to migrate my essbase server to another machine. All is done, planning is installed and is working. When I copy the database folders (in my case Hyperion\Essbase\App\...) to the new server and i want to start the database, it throws an error: +Error: 1002097 Unable to load database [NCCost]+.
If I delete .esm file, database starts succesfully. But, when I refresh essbase from planning, .pag and .ind files are removed. So, when I go to forms, I don´t see any data.
Any idea? Is there any way to modify .esm file and do it work?
Thanks for your time guys!
Fabián.

Hi Daylan!
Yes, I think that this is the best way, but, old essbase has a lot of data (it´s a production server). We think that this will take a lot of time, but now, I think that is the best way. I will research a few hours more for other export/import method, but I dont hope that exists.
The issue is that the servers are in differents networks.
Any help is appreciated!
Thanks for your time Daylan!
Best Regards,
Fabián.

How can I use DOM to copy Nodes between different XML Document ?

Can I copy one Node or Element from one XML Document to another Document by DOM ?
Because I use the Xerces , but it is not work if I want to copy Node between different Document, or I am doing something wrong. Anyone can help me , I will deeply appreciated !!

check out the importNode() method of Document.

OCI database connection.. move app between different env

I'm using Oracle E-business suite 11.5.10 together with Jdev OA (RUP4) to create a wep app. However I'm a litte confused about how to set up an OCI database connection while making it possible to move the web app between different environments, with different apps passwords etc.
I would like to use local environment variables to set the connection string (SID, apps password etc), but I'm not sure howto do this since the connection is stored in static xml files.
A possible solution is that to change the ConnectionDefinition in oc4j.xcfg file at runtime?
Please give me an idea on how it should be done
Best regards,
Michael

Michael,
OA Framework tends to have it's own quirks and requirements in regards to connection setup. I'd suggest that you'd get a better answer in the OA Framework forum: OA Framework
Regards,
John

How do I move apps to different pages using my PC?

Wondering how to move iPad apps to different pages using (a) my PC and (b) my iPad. Thanks!

See the following articles:
http://ipadnotebook.wordpress.com/2012/12/10/how-to-use-itunes-11-to-arrange-app s/
http://www.cnet.com/how-to/how-to-arrange-iphone-and-ipad-apps-using-itunes/

How can I share purchased apps between different apple IDs?

Hi,
I bought a Mac recently and created a new Apple ID.
The Home Sharing for my Mac is 'on'. I want to copy my purchased apps from my Home Sharing account to my Mac. However, I'm struggling to do that.
Can anyone help me out please?
Thanks

A purchased app is associated with an Apple ID. A user with a different Apple ID cannot use the app unless they also use the same Apple ID.
I cannot use my wife's apps nor she mine because each were purchased with different Apple IDs.

How to sync data/apps between different iTouches?

I have my itouch, and some apps for my kid.
If I buy a new itouch, I'd like to move all my existing data to the new ipod touch, then put only a few apps on the old ipod touch.
how would i go about managing multiple ipod touch devices using itunes?
Can I mix and match apps between the various ipods?

You can sync as many ipods as you like to one computer/library.
Each device is different and can be set to sync whatever you like.

Context binding between different components using component interface cont

Please tell me the procedure how to do context mapping between different components ......
Please post the procedure ASAP.

Hi Koti,
Check this
<a href="/people/bertram.ganz/blog/2007/01/19/new-web-dynpro-java-tutorial--component-interface-definitions-in-practice:///people/bertram.ganz/blog/2007/01/19/new-web-dynpro-java-tutorial--component-interface-definitions-in-practice
<a href="https://www.sdn.sap.com/irj/sdn/wiki?path=/display/wdjava/usecomponentsinbiggerWebDynproprojects%28componentization%29&">https://www.sdn.sap.com/irj/sdn/wiki?path=/display/wdjava/usecomponentsinbiggerWebDynproprojects%28componentization%29&</a>
regards
Sumit

Problem with multiple requests to different servers using HTTPService

Hi
I'm aware that we are limited to two concurrent connections to a single host, so I'm looking into using either subdomains pointing to the same server, or separate physical servers to process multiple requests side-by-side.
However, whichever way I try to send three requests, looking at the Network Monitor the 3rd request always waits until one of the first two has finished. In the screenshot below, all three requests were sent at the same time to three separate physical servers, yet the top request didn't start until the bottom request finished, at 15:33:28
Any ideas how to get round this? I'm using SSL, but I've also tested it on HTTP with the same results. I'm writing an AIR app, and posted this on the AIR forum but was told it was a Flex issue and I should post it here.
Please let me know if any more information is needed
Many thanks
James

Would that still apply even though I'm not running this inside a browser, but in AIR?
I've seen this method recommended by other people, and also the following page seems to suggest that what I'm doing should work
http://www.chadupton.com/blog/2008/08/maximum-concurrent-http-requests-from-adobe-air/
Kind regards
James

Copying COA between different localisations with SDK

Hi,
I am trying to setup some extra companies on a different server with different localizations.
One of the main task that I want to achieve is to copy COA to all these new companies.
With a bit of codeing with SDK I have successfully post one account on the new companies.
I just wanted to know if there is any known issues/compatibility issue before I go ahead and copy complete COA list.
Any help will be highly appreciated.
Regards

Hi,
I think there is no issue except the professional user component license. Is the new database located in the same license server ?
As an info, you could use COA DTW template to import the COA into new different localisation database. The other is using addon copy express.
Rgds,

How to move or copy drivers between WDS servers

Problem: getting the same driver sets on multiple WDS servers
At our company we have two sites and two Windows Deployment Services servers. The server at our main site had all the driver packages for the hardware we use and we wanted the other server to hold the same set of drivers. There were too much drivers
to re-create them manually on the other server. We found no 'normal' solution to this problem, like an export or import.
However on examining the contents of the DeploymentShare (or RemInst share) I found a folder 'Stores' containing a folder 'Drivers' which seemed to contain all drivers and a folder 'metadata' containing a database and a locked file...
Here's what we tried on a hunch and what turned out to be working:
Stop "Windows Deployment Services Server' service on the primary server.
Copy folder 'DeploymentShare\Stores\Drivers' with content to another location.
Start "Windows Deployment Services Server' service again on the primary server.
Stop "Windows Deployment Services Server' on the target server.
Remove or move original 'DeploymentShare\Stores\Drivers'-folder.
Put 'Drivers'-folder from primary server in 'DeploymentShare\Stores'-folder
Start "Windows Deployment Services Server' on the target server.
Behold! The target server contains and services all drivers like the primary server (-:
Use at your own risk...

Hi Angry Technician
I had exactly the same issue as you. I had copied all the RemoteInstall files and folders from the original WDS server to the new server.
The Driver Groups appeared, but not the driver files within the groups. However when I restarted the WDS server a second time, they all appeared. I didn't change anything in between, other than adding a Win8.1 boot image (which I highly recommend
instead of the Win7 one!)
I realise you've probably restarted your WDS server a bazillion times before now (the posts are quite old) but I thought this might help someone else.
Thanks

OSB - Deploying a java service on different servers using Ant script

Hi All,
My scenario is, I have two installations of OSB(with workshop), one on unix machine and other on windows machine...Now the problem is like, I have one java code exposed as a weblogic service ( this is created in workshop of windows machine), I need to deploy this service on my unix server using ANT script....
Could any one pls let me know how to do this ( deploying services using Ant on different boxes).....
Any help is appreciated....
Thanks & Regards
Feroz Tasha.

Use the "targets" option to set the server where you want deploy your app.
More info in [http://edocs.bea.com/wls/docs81/deployment/tools.html#1000477]

Deploying a java service on different servers using Ant script

Hi All,
My scenario is, I have two installations of OSB(with workshop), one on unix machine and other on windows machine...Now the problem is like, I have one java code exposed as a weblogic service ( this is created in workshop of windows machine), I need to deploy this service on my unix server using ANT script....
Could any one pls let me know how to do this ( deploying services using Ant on different boxes).....
Any help is appreciated....
Thanks & Regards
Feroz Tasha.

Use the "targets" option to set the server where you want deploy your app.
More info in [http://edocs.bea.com/wls/docs81/deployment/tools.html#1000477]

Export to multiple HFM apps on different servers

Hello,
We have an FDM application in our DEV environment and successfully load HFM in the same DEV environment. We would like to use FDM in DEV to load an HFM applcation on the TEST server. Is this possible? Can someone point me to the right documentation?
Thanks!

Hi,
Thank you for your post in Windows Server Forum.
From your description it seems that you want to publish 2 different RemoteApp from different server. Please correct me if understand wrongly. If this is the case then; yes, you need to install RDS role on both server to have both Remote App published on different
server. Or you can also do the other thing; publish both the RemoteApp from the same server and assign the user who wants to manage whichever RemoteApp they want.
In addition, I suggest you to update the RDP version to RDP 8.1 for better functionality.
Hope it helps!
Thanks.
Dharmesh Solanki

Copying app between different servers using CopyApp into EPM architectur

Similar Messages

Maybe you are looking for