Copying Batch Characteristics

Hi gurus.
I have created 023 Class for BAtch classification.
I'm ussing that in Goods Receipt.My requeriment is to copy data automatically from header data to characteristics in batch classification, i.e. Mkpf-frbnr to one of my batch characteristics.
Is that possible?, please advice.
BR
Juan.

Juan Bañuelos wrote:
> Hi gurus.
> I have created 023 Class for BAtch classification.
> I'm ussing that in Goods Receipt.My requeriment is to copy data automatically from header data to characteristics in batch classification, i.e. Mkpf-frbnr to one of my batch characteristics.
>
> Is that possible?, please advice.
>
> BR
> Juan.
I dont think its possible, you need to copy line by line and paste them in batch classification. You can create LSMW, if there are lots of characteristics to be copied.

Similar Messages

MIGO : Error when copying batch characteristics

Hi,
I've some problem on MIGO Tcode when i want to copy the batch characteristics.
I work with class type 022.
I create a GR from PO. (movement 101). My item line contained sub-items (with BOM). So i would like to copy the batch characteristics in reference of component batch values.
I've implemented the UE "EXIT_SAPMM07M_004".
Case 1 : In this UE, i fill a standard internal table (named VALUES) with the characteristics names and values i want to resume.
and i use the FM 'CLFM_OBJECT_CLASSIFICATION' with the father and the son batch information in UE, i go to MSC3n and all characteristics are copied (even those unwanted). But when i go to MCS2N, i retrieve the expected values.
Case 2 : Only use the internal table, but some characteristics are not maintained.
Case 3 : Only use the FM, but no characteristics are reversed.
Does anyone could help me ?
Thanks in advance
Best regards.

Hi,
Table and field used in additional data table should be related to the object than only it will work, for e.g. MCHA and ERDAT will work if you create a characteristcis and assign it to class type Batch (022/023) because MCHA table has Batch no. as primary key,
this implies for using material specific table e.g. MARA , you should use characteristics with class type 001 (Material class) , try using with table MARC also
Cheers
Dheeraj

Copying Batch Characteristics Value from Standard SAP Table Field

Dear Experts,
1. While creating a user-defined Batch Characteristics 'CREATED_BY' using ct04, on the Additional Data tab, I filled the following fields as follows: Table Name = MCHA, Field Name =ERNAM.
'CREATED_BY' was then assigned to a batch Class TRIMMED (of class type 022).
TRIMMED was assigned to a batch managed material ADE245DD.
After posting co15 (confirmation of production order) for material ADE245DD, the value in table MCHA & field ERNAM is automatically copied into the Batch Characteristics value field of u2018CREATED_BYu2019 for the generated batch.
2. But I am unable to achieve the same result when I create another Batch Characteristic with similar settings in the Additional Data tab as follows: Table Name = MARC, Field Name = DISPO.
After doing co15, the value stored in table MARC and field DISPO does not get copied into the Batch Characteristics value.
Please what do I need to do in Scenario 2 above to achieve the same result as in Scenario1?
Regards

Hi,
Table and field used in additional data table should be related to the object than only it will work, for e.g. MCHA and ERDAT will work if you create a characteristcis and assign it to class type Batch (022/023) because MCHA table has Batch no. as primary key,
this implies for using material specific table e.g. MARA , you should use characteristics with class type 001 (Material class) , try using with table MARC also
Cheers
Dheeraj

BAPI's for copy batch characterestics at the time of Goods Recipt save

Dear members,
I am copying the Batch characteristics values of the order(Process order) to new batch at the time of GOODS RECEIPT (GR) in repack process.
Can anyone please let me know there are any BAPI's for copy batch characteristics values to New Batch in GR(MB31 or MIGO) at the time of Goods Receipt SAVE.
Thanks,
Srinivas

hi srinivas,
did you find any solution for this problem. we are facing the same issue and currently thinking of few alternatives to deal with it. whether to use BADI for Batch derivation or to use a BAPI.
thanks,
Kunal

Copy of Batch characteristics value from material master to Batch

Hi Gurus,
I have maintained some values in the characteristics under batch classification in material master and want to copy the values in batch characteristics during batch creation at process order release.
Can any one help me to achieve this in standard way?
Thanks
Sandip

Hi,
Try to understand the batch classification functionality...In batch classification characteristic values changes from batch to batch...Values should not be maintained in the material master...it does not have any meaning...in the material master we need to assign only the batch class with class type 023 in classification view ...no need to assign the values there....Batch classification means characteristics values differs from batch to batch...
Thanks
Kumar

Copy manufacturing date to batch characteristics in REM confirmation

Hi to everyone,
I have a situation that when goods receipt occurs with movement 131 in MFBF, manufacturing date is not updated in batch. How can I copy the value as batch characteristics?
please advice,
best regards..

Hi,
If you want the value as batch characteristic you need to:
1. Create the characteristic in trn. CT04, with reference to field MCHA-ERSDA (or MCH1-ERSDA if your batch management is cross-plant)
2. Create a class in trn. CL02 and include the characteristic in it.
3. Assign the class to your material in Material Master.
Hope it helps.
Regards,
mr.

Batch Characteristics copying from material HALB to FERT

Dear Experts ,
I have one typical scenario, in whcich we want copy the batch Characteristics semifinsihed product to finished product.
( these Characteristics recorded by quality dept for semifinshed products and updated in batch)
Please let me know the solutions.
Regards
Sandeep

Hi Sandeep,
This can be achieved by Use of Batch Derivation Functionality.
Go to t.code DVSP and activate Batch Derivation.
Now ,First Create Sander Condition by usng T.code DVS1,
Assign Material type (Halb) and assign required characteristic for which you want to transfer Batch value to Fert Code.
Then create recipient condition by T.code DVR1.
Assign material Type Fert to it and Characteristic which you have assign in T.code DVS1.
This will work during Production Order or Process Order release.
And for this you have do Batch Determination for Halb in Order itself
Regards,
Dhaval

SD pricing based on Batch characteristics

Hi,
I have a requirement whereby the pricing in the billing document is dependent on the batches in the delivery document. Eg. For a single material, I may two batches each one having its % of impurities - 2% for the Batch 1, and 5% for Batch 2 in the delivery document. For this reason, Batch 1 should have Price 1 and Batch 2 should have Price 2 in the billing document. How will I configure this? At the time of Sales order, I do not know my exact price(since the batch details are not known), hence, I will be giving just a base price. The actual prices are to be calculated in the billing document based on batch characteristics(in the delivery document).
I would appreciate your inputs.
Regards,
Tim

Hi,
I think you can maintain your condition record in VK11 on the following combinations:
Material /Batch
This access sequence can be created by making your own condition tables in transaction V/03.
While doing billing ,you can carry out new pricing.
Suppose you have a condition type PR00 in sales order and you are also maintaining access sequence for this purpose then this access sequences should be such that when you carry out pricing at billing the same values should not be copy to billing.
Then the system would take the value of second access sequence from VK11.
Your second access sequence will be Material/Batch and the condition in the billing document will be picked based on them.
Regards
Karan

SAP MM Batch characteristics during Plant to plant stock transfer

Hello,
I have a requirement where if i have 100 kg of a batch A in X plant and i transfer 70 kg of this batch A to Y plant. So now i have 70 kg of Batch A in X plant and 30 kg in Y plant.
I want the batch characteristics of the batch A to be copied in Plant B as well, but when plant B does some quality testing and overwrites a few batch characteritics this should not affect the batch characteritics of the Batch A in plant X. ( We donot want to create a new batch in Plant Y due to traceability reasons)
We have maintained Batch level at "Plant level" in config
Any pointers to userexit to force copy the batch characteristics initially from Plant X to Plant Y for Batch A is also welcome.
Thanks
Anurag

Please dont post the same question in multiple forums. Continue in one thread
thanks
G. Lakshmipathi

Updated Batch Characteristics on Order Release is not available in MSC3N

Hi All,
I have maintained the Class (023) and characteristics for Finished Material. When I am releasing the production order, I am assigning the values for batch characteristics (Custom defined characteristic) after that, If I go and see the corresponding batch in display mode (MSC3N) the value for the characteristic is not updated (entered value not available its blank).
u2022 Automatic batch creation for the production order during the order releasing is happening exactly as per the configuration but the entered value for the characteristic is not available for the corresponding batch in change as well as display mode (MSC2N/MSC3N)
Please guide to solve out this issue
Thanks in Advance

Hi Sanil,
Thanks for your speedy reply.
For me characteristics and all available as per the expectations but the updated value for the characteristcs on release is not sticking with the batch.
Please guide me to solve out this issue.
Thanks in Advance

Batch Characteristics value in report

I want to develop a custom report where material master batch characteristics value should be displayed.
The report will display based on Process order No. In Process order AFPO table I am bringing MATNR, CHARG, WERKS information.
Now, the MATNR is maintained with a batch classification of class type 001 (material class) one characteristic "Z_NUMERIC" and value is maintained as "22345".
Now, in custom report I have to bring the 22345 no. In which Table I can get the information for material for 001 class type characteristics value?
Please repond.

You can find it in table ausp
Regards,
Dhaval

Getting Batch from Packaging material Number (Batch characteristics)

Hi Gurus,
I've a requirement.
i want to know the batches where the packaging material is used.
Packaging material is one of the batch characteristics, if i assign the same packaging material number in one batch, that should not be assigned to another batch.
I want to know in which batches the same packaging material is assigned.
Please guide me?? which table has the links for batch, packaging material number and main material number???
How can i find this???
Thanks in advance.
Adi.

we can use the MMCL transaction/BMBC to see this.
In MMCL we have a FM to get the Data.

Modifying batch characteristics value

Dear Experts,
We have created batch characteristics named 'POTENCY','LOD','ASSAY'.
Now the value of POTENCY is calculated based on the formula, that is LOD * ASSAY. There are chances that the value is sometimes calculated more than 100%. Now I want to put a restriction that if the value increases more than 100 than the value of POTENCY should be automatically be 100.
What should I do to resolve this issue.
NOTE - POINTS WILL BE REWARDED.......

Hello,
You can write a specific FM called by the configurator (procedure which call a user FM). Input are your LOD andd ASSAY, output is POTENCY. Inside you can write your formula.
Parameters are given by std tables.
This is sample :
FUNCTION zsca_calcul.
*" IMPORTING
*"     VALUE(GLOBALS) TYPE CUOV_00
*" TABLES
*"      MATCH STRUCTURE CUOV_01
*"      QUERY STRUCTURE CUOV_01
*" EXCEPTIONS
*"      FAIL
*"      INTERNAL_ERROR
DATA : w_met_cmin_r LIKE cuov_01-atflv.
CLEAR : w_matnr_paracheve, w_instance .
BREAK-POINT.
lecture des données en entrée dans la table query
LOOP AT query WHERE atcio = 'I'.   "input parameter
vérification type num
    IF query-atfor NE 'CHAR'.
     MESSAGE ID 'ZSCA_CONFIGURATEUR' TYPE 'W' NUMBER '000' RAISING fail
    ENDIF.
    CASE query-varnam.
      WHEN 'MET_NUMART_MLAZ'. ' my single input characteristic
        w_matnr_paracheve = query-atwrt.
        PERFORM lire_mara. ' process the input parameter
        PERFORM lire_carac.
      WHEN OTHERS..
     MESSAGE ID 'ZSCA_CONFIGURATEUR' TYPE 'W' NUMBER '000' RAISING fail.
    ENDCASE.
ENDLOOP.
update of the output characteristic MET_CODEMAT (it is numeric and contains value 9
READ TABLE query WITH KEY varnam = 'MET_CODEMAT'.
match = query.
match-atfor = 'NUM'.
match-atflv = 9.
APPEND match.
ENDFUNCTION.
Regards.

Change Documents for batch characteristics

Dear Guys,
Badly in need of your help !
In our project, we are required to report changes made on batches characteristics.
My program fetches records from CDPOS table that has change doc. object as 'CLASSIFY'.
The challenge is to find the new and old value. They are not directly stored in VALUE NEW and VALUE OLD. They are simply '1'.
I'm sure that they are stored somewhere in the database because the vlaue before and after change can be seen in the transaction mch3n via menu-> Display Change Documents.
I tried hard finding the table-field but looks like its not straight forward. This is really challenging.
Regards,
Ashok

Gert,
The change done in the project profile will only affect newly created projects.
Have you checked if change documents are created for new projects?
Hope this helps
Rgds
Martina

BAPI to update batch characteristics

Hi,
We have a requirement to update batch characteristics in SAP. I used the VB_BATCH_CHANGE to update the batch characteristics. Below is my code. After the call, I don't get any error from this BAPI/RFC, but batch chararacteristcis values are not updated. Any ideas?
FUNCTION Z_VB_CHANGE_BATCH.
*"*"Global Interface:
*" IMPORTING
*"     VALUE(YMCHA) LIKE MCHA STRUCTURE MCHA
*"     VALUE(YUPDMCHA) LIKE UPDMCHA STRUCTURE UPDMCHA OPTIONAL
*"     VALUE(CHANGE_LGORT) LIKE MCHB-LGORT OPTIONAL
*"     VALUE(BYPASS_LOCK) LIKE AM07M-XSELK DEFAULT SPACE
*"     VALUE(BYPASS_POST) LIKE AM07M-XSELK DEFAULT SPACE
*"     VALUE(X_BNCOM) LIKE BNCOM STRUCTURE BNCOM OPTIONAL
*"     VALUE(KZCLA) LIKE T156-KZCLA OPTIONAL
*"     VALUE(XKCFC) LIKE T156-XKCFC OPTIONAL
*"     VALUE(CLASS) LIKE KLAH-CLASS OPTIONAL
*"     VALUE(NO_CHECK_OF_QM_CHAR) LIKE AM07M-XSELK DEFAULT SPACE
*"     VALUE(REF_MATNR) LIKE MCHA-MATNR OPTIONAL
*"     VALUE(REF_CHARG) LIKE MCHA-CHARG OPTIONAL
*"     VALUE(REF_WERKS) LIKE MCHA-WERKS OPTIONAL
*"     VALUE(SET_OLD_BATCH) LIKE AM07M-XSELK DEFAULT 'X'
*"     VALUE(BUFFER_REFRESH) LIKE AM07M-XSELK OPTIONAL
*"     VALUE(NO_CHANGE_DOCUMENT) LIKE AM07M-XSELK DEFAULT SPACE
*"     VALUE(GRUND) LIKE MSEG-GRUND DEFAULT SPACE
*"     VALUE(NO_CFC_CALLS) LIKE AM07M-XSELK DEFAULT SPACE
*"     VALUE(BATCH_DEL_FLAGS) LIKE BATCHDELFLG STRUCTURE BATCHDELFLG
*"       DEFAULT SPACE
*"     VALUE(SEND_SYS) TYPE LOGSYS DEFAULT SPACE
*" EXPORTING
*"     VALUE(YMCHA) LIKE MCHA STRUCTURE MCHA
*"     VALUE(EMKPF) LIKE EMKPF STRUCTURE EMKPF
*" TABLES
*"      CHAR_OF_BATCH STRUCTURE CLBATCH OPTIONAL
*"      CHANGED_BATCH STRUCTURE MCHA OPTIONAL
*"      ZIMSEG STRUCTURE IMSEG OPTIONAL
*"      RETURN STRUCTURE BAPIRET2 OPTIONAL
*" EXCEPTIONS
*"      NO_MATERIAL
*"      NO_BATCH
*"      NO_PLANT
*"      MATERIAL_NOT_FOUND
*"      PLANT_NOT_FOUND
*"      LOCK_ON_MATERIAL
*"      LOCK_ON_PLANT
*"      LOCK_ON_BATCH
*"      LOCK_SYSTEM_ERROR
*"      NO_AUTHORITY
*"      BATCH_NOT_EXIST
*"      NO_CLASS
*"      ERROR_IN_CLASSIFICATION
*"      ERROR_IN_VALUATION_CHANGE
DATA: F_TRANSACTION_ID           LIKE ARFCTID.
CALL FUNCTION 'TRANSACTION_BEGIN'
    IMPORTING
      TRANSACTION_ID = F_TRANSACTION_ID.
CALL FUNCTION 'VB_CHANGE_BATCH'
    EXPORTING
      YMCHA                     = YMCHA
      YUPDMCHA                  = YUPDMCHA
      CHANGE_LGORT              = CHANGE_LGORT
      BYPASS_LOCK               = BYPASS_LOCK
      BYPASS_POST               = BYPASS_POST
      X_BNCOM                   = X_BNCOM
      KZCLA                     = KZCLA
      XKCFC                     = XKCFC
      CLASS                     = CLASS
      NO_CHECK_OF_QM_CHAR       = NO_CHECK_OF_QM_CHAR
      REF_MATNR                 = REF_MATNR
      REF_CHARG                 = REF_CHARG
      REF_WERKS                 = REF_WERKS
      SET_OLD_BATCH             = SET_OLD_BATCH
      BUFFER_REFRESH            = BUFFER_REFRESH
      NO_CHANGE_DOCUMENT        = NO_CHANGE_DOCUMENT
      GRUND                     = GRUND
      NO_CFC_CALLS              = NO_CFC_CALLS
      BATCH_DEL_FLAGS           = BATCH_DEL_FLAGS
      SEND_SYS                  = SEND_SYS
    IMPORTING
      YMCHA                     = YMCHA
      EMKPF                     = EMKPF
    TABLES
      CHAR_OF_BATCH             = CHAR_OF_BATCH
      CHANGED_BATCH             = CHANGED_BATCH
      ZIMSEG                    = ZIMSEG
    EXCEPTIONS
      NO_MATERIAL               = 1
      NO_BATCH                  = 2
      NO_PLANT                  = 3
      MATERIAL_NOT_FOUND        = 4
      PLANT_NOT_FOUND           = 5
      LOCK_ON_MATERIAL          = 6
      LOCK_ON_PLANT             = 7
      LOCK_ON_BATCH             = 8
      LOCK_SYSTEM_ERROR         = 9
      NO_AUTHORITY              = 10
      BATCH_NOT_EXIST           = 11
      NO_CLASS                  = 12
      ERROR_IN_CLASSIFICATION   = 13
      ERROR_IN_VALUATION_CHANGE = 14
      OTHERS                    = 15.
IF SY-SUBRC IS INITIAL.
    CALL FUNCTION 'TRANSACTION_END'
      EXPORTING
        TRANSACTION_ID = F_TRANSACTION_ID
      EXCEPTIONS
        OTHERS         = 1.
ELSE.
    CALL FUNCTION 'BALW_BAPIRETURN_GET2'
      EXPORTING
        TYPE   = SY-MSGTY
        CL     = SY-MSGID
        NUMBER = SY-MSGNO
        PAR1   = SY-MSGV1
        PAR2   = SY-MSGV2
        PAR3   = SY-MSGV3
        PAR4   = SY-MSGV4
      IMPORTING
        RETURN = RETURN.
    APPEND RETURN.
    CALL FUNCTION 'TRANSACTION_ABORT'
      EXPORTING
        TRANSACTION_ID = F_TRANSACTION_ID
      EXCEPTIONS
        OTHERS         = 1.
    EXIT.
ENDIF.
ENDFUNCTION.
Thanks,
Sara

Hi Subramani,
Thanks for your response.
BAPI_BATCH_CREATE will not work for us, because we are trying to update batch, not creating new batch.
Also, The function TRANSACTION_END, I am calling in the code is responsible for committing the transaction.
Thanks,
Sara

Copying Batch Characteristics

Similar Messages

Maybe you are looking for