Copying between layers.
When I try to copy and paste an image from one layer to another layer in the same document, I receive the following error:
"Cannot paste or place onto locked or hidden layers. Do you want to unlock and show all affected layers in order to paste?"
Now, I do not have any layers locked.
What I do have is the original layer hidden. For whatever reason, I don't seem to be able to paste into any layer other than the one I've copied from. I don't believe I have had this problem in the past.
Any ideas?
I believe I am.
The new layer is selected. But no matter what I do it keeps trying to paste to the old layer (the layer from which the copied material derived).
In fact, I've even selected items in the new layer and hit paste inside... but again, no luck.
Similar Messages
-
CS 5.5 Mac - can't copy and paste between layers
I'm running CS 5.5 on Mac (OS 10.7.4). Try as I might, I can't copy and paste between layers.
Create new document
Create new layer (= 2)
With first layer active, create text box and type randomly
Swtich to pointer, select text box, Copy
With second layer active, Paste
Error message onscreen:
<<Cannot paste or place onto locked or hidden layers. Do you want to unlock and show all affected layers in order to paste?>>
If click OK, the source layer (layer 1) becomes active again, and my text box gets pasted in. The destination layer (layer 2) is untouched.
Both layers are visible, neither of them are locked.
Any ideas much appreciated!It sounds like you need to trash your prefs. See Replace Your Preferences
And it shouldn't throw that message, but also check to be sure that Paste Remembers Layers isn't checked in the Layers panel flyout menu or you'll never get anything to paste from one layer to another. -
JPEG/PSD issue--I open a jpeg and edit it (levels, crop) and then "save as" and the save as option shows there are now levels in the image and it wants to save it as a .psd file or a copy with layers. What am I doing that has these settings appear?
16bit? Pixels extending beyond the canvas? (from a crop with delete unused pixels turn off). Have you previously been saving PSD files?
IME you sometimes have to tell Photoshop that the first save of a session is JPG, and it remembers from there on. The way to 'tell' Photoshop that JPG, or PDF, or PNG etc are now your preferred format is to Ctrl (Cmd) click on that format in the Save As drop down list. So long as the file does not have parameters that your chosen format does not support, then this should work for you.
[EDIT] Just noticed that you did include 'Crop' in the subject line. Do you have 'Delete cropped pixels' checked? -
Is it feasible to do System copy between SAP r/3 4.7 and ECC 6.0?
Hello Everyone,
Please let me know is it possible to do a system copy between two different SAP versions( SAP R/3 and ECC6.0 ABAP stack)
Background:
OS: Windows 2003
DB: MSSQL 2005
Appreciate your response
Thanks,
VadivambalHi,
We have done the system copy from production(till dec data) to sandbox and then upgarded from R/3 4.7 to ECC 6.0.
Now the upgraded server has a data till december and our functional team wants to have all data from current production(r/3 4.7) to Sandox (test upgarde m/c) for testing since some of new applications have gone live after dec.
Please suggest me how to we bring those data to test upgarde machine.
Will client copy help in this case?
Please let me know
Thanks,
Vadi -
Client Copy between unicode system and non-unicode system
Hello,
we have to build up a new system for japan. It is planned to install a new 4.7Ext200 unicode system and then make a client copy from a non-unicode 4.7Ext200 (language= german, english) system to the unicode system. I don't think that this is possible way, but I can't find information regarding client copies from non-unicode to unicode. I would advice the project to convert the existing non-unicode system to unicode, make a system copy for the new system and then install japan languages. Any information, which can help me.
Regards,
AlexanderHi,
without conversion client copy is not possible
look at following
Re: Client copy between unicode and Non-unicode
regards,
kaushal -
I am currently using the 30 day free trial of iWork. I use Excel in a specific way that is crucial to my business. I don't do much of anything fancy, but need the following functionality:
I use spreadsheets in Excel which I then I copy (using either the Copy command or the Camera tool), switch applications to VectorWorks, and paste into my main project document. Excel copies all of the elements of my selection, and the resulting paste into VectorWorks consists of lines and text complete with formatting (font, size, bold, italic, etc). When I attempt the same action in Numbers, the resulting paste into VectorWorks is a Bitmap image. Is there any way to copy and paste between Numbers and VectorWorks in the same manner as I currently work with Excel and VectorWorks? I would love to be able to get away from Microsoft, but if I can't copy between applications, Numbers is of no use to me.Hello
I met this kind of problem.
My workaround is to paste in TextEdit then copy and Paste into the final destination.
It's a bit cumbersome but it works.
Perhaps Apple guys will edit the way they treat the clipboard.
They don't normalize it when pasting from Numbers to Pages or Keynote, so we get formulas or some other odd results.
Your problem with VectorWorks let me think that the way they "normalize" the clipboard when leaving iWork apps is not perfectly correct.
It seems that a range of cells must be passed as a TAB delimited block of values which may be pasted in a tool like VectorWorks.
Yvan KOENIG (from FRANCE dimanche 26 août 2007 18:46:18) -
Client Copy between Two Different Systems
Hi!!
Could someone please explain or provide any documentation which explains how to perform client copy between two r/3 systems of same version(ecc 6.0)
Thanks and Regards,
Vishwa.Hi,
Save the contents that need to be copied in a Transport request at source client.
Now at the target client system,
execute transaction 'SCC1' and give the TR number and execute it.
The changes from the source client system this way will get copied to destination client system.
Reward if useful!
Thanks,
KalpanaR -
hello I saw in the latest version of photoshop , smart guides make a measurement between layers, I still have windows xp and I can not buy that version , there is something like to do that but cs6 ? thx
There definitely is! Here's a link to the Adobe tutorial: Work with Smart Guides | Adobe Photoshop CC tutorials
-
Switch between layers in a BEx MAP
Hi,
Does anyone have an idea how to switch between layers in a BEx Map? And manipulate the attributes on the MAP in WAD. I ever saw a demo of such a web template which could do that.
Thanks,
CKHi,
here is some javascript which might be useful in your case
function create_checkbox(mapitem) {
var prop = SAPBWGetItemProp(mapitem);
if (prop != null){
map_panel_html = "<form name="map_panel_input">";
for(k=1;k<prop.length;k++){
if (prop[k][0].substr(0,7) == "SUBITEM") {
prop2=SAPBWGetItemProp(prop[k][1]);
hidden = true;
if (prop2 != null) {
for(l=1;l<prop.length;l++){
if (prop2[l][0] == "HIDDEN") {
hidden = (prop2[l][1] == "X");
map_panel_html = map_panel_html +
"<input type="checkbox" name="" +prop[k][1] +
"" value="" + prop[k][1] +
"" onClick="change_map_layer(this.value, this.checked)"";
if (!hidden) {
map_panel_html = map_panel_html + " checked";
map_panel_html = map_panel_html + "> "+ prop[k][1] +"<br>" ;
map_panel_html = map_panel_html + "</form>";
document.getElementById("map_panel").innerHTML = map_panel_html;
function change_map_layer(maplayer, show) {
if (show) {
location.href="<SAP_BW_URL>" + "&item=" + maplayer + "&hidden="
else {
location.href="<SAP_BW_URL>" + "&item=" + maplayer + "&hidden=X"
Just add additional a
<div id="map_panel"></div>
<script type="text/javascript">
<!--
create_checkbox("MAP_1")
-->
</script>
in your Web Template and replace MAP_1 with your web item name.
This code will check the map for its layers and you can show or hide them.
Heike -
Client copy between clients having different OS(Linux and Windows)
Dear All,
I would like to do client copy between a client in development system having Linux OS and a client in sandbox system
having Window OS.
Is it possible?
Regards,
VinodYou can get more info at ::*
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/69/c24c0f4ba111d189750000e8322d00/frameset.htm*
& also check note 552711 which clearly say at point no 5 .*
5. Can I create client copies in a heterogeneous system landscape?*
Remote copies or client transports can also be carried out between different database and operating systems.*
Please close thread if you feel your question has been answered.*
Thanks..
Mohit
Do NOT post in bold.... 2nd warning.
Read the "Rules of Engagement"
Edited by: Juan Reyes on Aug 27, 2009 12:07 PM -
Hi all,
I have an issue in data copy between entities and scenarios.
I have the raw data in entities 1,2,3 etc and Scenario A. I need to copy this data to entities 4,5,6 and Scenario B.
S#A.E#1 = S#B.E#4
S#A.E#2 = S#B.E#5
S#A.E#3 = S#B.E#6
When i do this using HS.EXP..I get and error message saying that "Invalid destination specified"
But it is invalid to use Entity on the LHS of HS.EXP...How do i go about solving this problem?
Any help will be greatly appreciated.
Thanks!
RamithRamith
You would need to do something like the following to get around this as you can specify items outside of the current subcube on the left side of the rules
If HS.Scenario.Member = "A" Then
If HS.Entity.Member ="2" Then
hs.exp = "A#ALL = S#B.E#4"
End if
End If
JTF -
Move/Copy between Libraries failing
SP13 user attempted to move/copy between identical libraries and failed and they had design rights and the process failed. I read need Full Control so I granted user Full Control to the both Libraries. In fact I added them to an AD group that
has full control for the site.
Initial comment with Designer Rights
I am attempting to move all the files & metadata from ‘HR Photo Library’ to ‘Employee Photo Library’.
Both Libraries are the same & contain 1 special column.
I have access to the Site Setting Management area where the ‘Move’ action is done.
But when I attempt to Actions> Move> Employee Photo Library> Ok, I then get a Prompt
“Inadequate permissions to ‘Employee Photo Library’ to complete this operation. Choose a different target.”
They indicate still fails with following comment when they have full control rights
When I Move/Copy, the columns are updated in the destination library, but the files fail to be transferred.
Failures happen when moving items from:
Same Site: Picture Lib > Pic Library
Same Site: Document Lib > Document Library
Same Site: Picture Lib > Document Library
Cross Site: Picture Lib > Pic Library
Cross Site: Document Lib > Document Library
ANY IDEAS?Hi,
According to your description, my understanding is that it failed when you moved/copied documents from one library to another with full control via Content and Strucutre feature.
As you said you added the users via AD groups, please add the users into the SharePoint site owners group, compare the result.
And in your reply, whether you meant the site administrator can move the actions.
Please check if the link is useful for you:
http://blogs.msdn.com/b/maximeb/archive/2008/01/11/error-when-moving-a-file-using-manage-content-and-structure-if-you-are-not-an-hierarchy-manager.aspx
If this issue still exists, please go to the log file to check more information about this error. The path of the log file is: C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\LOGS.
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support -
Can't copy between Classic and OS X
Hi,
i carbon copied a OS 10.4 installation to a new disk, then copied an os 9 folder to that same disk in the root directory. Now i get an error message that i can't copy between classic and os x, an error message that keeps on appearing.
Both the os x.4 and the classic version worked before on that same mac, but on different disks... any chance why this won't work anymore??
G4 Mac OS X (10.4.6)Hi Peter. Welcome to the Forum…
Please give the exact wording of the error message, and a brief description of the circumstances.
How many disks were involved in copying OS 10.4 to a new disk, please? It can work but it's not reliable to clone from the boot volume, so you should really do that only with a third disk to boot from…
Are there no other symptoms? Everything but copying works fine? -
Cant move items between layers CS6
I cant move items between layers in CS6.
The items are not locked
The items are not in groups
The layers are all unlocked
I select the item I want to move then try and move the item to the layer above (or below) with the "dot" on the right side of the layers pallete and nothing happens!
Please help? What am I doing wrong?
Suggestions please
Andrewtrue. the <path> was in the toplayer and came from a sublayer. see screens.
I now discovered that with the option 'show layers only' off, I can also move objects from a toplyaer into a sublayer in CS5! great!
by showing the <path> you can drag that into a sublayer. this couldn't be done by selecting the object when it was 'invisible' (as a <path> 'layer') by grabbing the colored square from the top layer into a sublayer (gave a 'no entry' sign).
thing is that in CS6 if the option 'show layers only' is selected, you cannot drag anything anymore...
so there is an extra restriction, rendering the "show layers only" option useless as working mode.
Why? -
Move/Copy multiple Layers to other document with Script
Hello, I have one question to how move or copy multiple layers to other document?.
With this script i can move one by one:
var docRef = app.activeDocument;
var moveLayer1 = docRef.artLayers.getByName('Title');
var moveLayer2 = docRef.artLayers.getByName('Background');
var moveTo = app.documents.getByName('Untitled-1');
var layerRef = moveLayer1.duplicate( moveTo, ElementPlacement.PLACEATBEGINNING);
var layerRef2 = moveLayer2.duplicate( moveTo, ElementPlacement.PLACEATBEGINNING);
but i need move two layer in one step....var docRef = app.activeDocument;
select_layer("Title");
select_layer("Background", true);
var moveTo = app.documents.getByName('Untitled-1');
duplicate_active_layer(docRef, moveTo);
function select_layer(name, add_to_sel)
try {
var desc = new ActionDescriptor();
var ref = new ActionReference();
ref.putName( charIDToTypeID( "Lyr " ), name);
desc.putReference( charIDToTypeID( "null" ), ref );
desc.putBoolean( charIDToTypeID( "MkVs" ), false );
if (add_to_sel) desc.putEnumerated( stringIDToTypeID( "selectionModifier" ), stringIDToTypeID( "selectionModifierType" ), stringIDToTypeID( "addToSelection" ) );
var ok = true;
try { executeAction( charIDToTypeID( "slct" ), desc, DialogModes.NO ); } catch(e) { ok = false; }
ref = null;
desc = null;
return ok;
catch (e) { alert(e); throw(e); }
function duplicate_active_layer(src_doc, dst_doc)
try {
app.activeDocument = src_doc;
var d = new ActionDescriptor();
var r1 = new ActionReference();
r1.putEnumerated( charIDToTypeID( "Lyr " ), charIDToTypeID( "Ordn" ), charIDToTypeID( "Trgt" ) );
d.putReference( charIDToTypeID( "null" ), r1 );
var r2 = new ActionReference();
r2.putName( charIDToTypeID( "Dcmn" ), dst_doc.name);
d.putReference( charIDToTypeID( "T " ), r2 );
d.putInteger( charIDToTypeID( "Vrsn" ), 2 );
executeAction( charIDToTypeID( "Dplc" ), d, DialogModes.NO );
d = null;
r1 = null;
r2 = null;
catch (e) { alert(e); throw (e); }
Maybe you are looking for
-
BCF Balance Carry-Forward CopyOpening and scoping
Dear Experts, We are running on BPC NW10. We are using standard DM package and logic script + BCF business rules to run BCF process. Everything works fine but now we would like to create alternative BCF process for some group of accounts. We defined
-
Servermgrd crashes every 10 minutes on 10.7.4
Hi all Noticed the servermgrd is crashing every ten minutes on our Mac mini running 10.7.4 with server. Some other weird errors are shown too: servermgrd: pipe(stdin) error: 24 servermgrd: pipe(stdin) error: 24 servermgrd: servermgr_ipfilter:ipfw con
-
could it be to do with the compatability being set to a windows setting?
-
Need help with RAW conversion in 1.5
Previous tests on RAW conversion have confirmed that Aperture and CI pretty much all in camera settings except white balance. In my previous tests with everything set to pretty much "normal" in camera Aperture's RAW conversion was close but not exact
-
I can't install any app in my iPad. When I touch the install button for some app in the AppStore, the new icon appears in the home screen, but the progress bar does not progress and it says Waiting. When I sync my iPad with iTunes in my laptop, I can