Copying but not moving?

Is it possible to copy a photo without moving it? Would like to place copies of all my Adobe Elements photos
on an external drive or flash drive but do not wish to move them from my adobe software.

  In Windows Explorer or a folder select the images and click Edit à Copy to Folder
Then navigate to your external drive.
The originals remain.

Similar Messages

  • Migrating from one imac to another, it is down to 1 minute remaining but not moving beyond

    migrating from one imac to another, it is down to 1 minute remaining but not moving beyond after 20 minutes

    Ok. Thanks.  We're all anxiously waiting for the good news....

  • My phone is in recovery mode before its was off and however ifs get on showing connect to itunes  but now in recovery mode its showing itunes is restoring software on phone and and above its showing waiting for phone but not moving further what shold i do

    my phone is in recovery mode before its was off and however ifs get on showing connect to itunes  but now in recovery mode its showing itunes is restoring software on phone and and above its showing waiting for phone but not moving further what shold i do

    Recovery mode...
    http://support.apple.com/kb/HT1808
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.

  • Photos copying but not displaying

    When I connect my ipod to iTunes it goes through the regular procedure of copying the photos to the iPod and the iTunes window tells me that the iPod has my 465 photos on it and the disk space on it has reduced accordingly but once I disonnect it there are no photos on it and the disk space is still reduced. Can anyone tell me what's wrong here?
    Photo   Windows 2000  

    I have found that if a photo is enhanced - lightened, touchedup, or anything else, the ipod will not recognize it. I have tried changing name, size, location, but nothing works. The only thing so far is to print the photo and rephotgraph with digital camera. Way too much work. I wanted to do slide show and want specific pics so I did it. But unhappy with this method. Let me know if you find a solution

  • Can copy, but not paste multi selected files

    Hello.
    In Indesign CS5 in the "Add documents" dialog, when adding documents to a book, I can select multiple files by using Alt. Let’s say I select a bunch of files within the same folder and gets a path, for example see "Original path" below.
    To save time I copy the "Original path". Next time I want to create the book I paste the "Original path" into the "Add documents" dialog. BUT unfortunately not all characters are pasted into the text box, in this case see "Pasted path" below. I understand that this has something to do with the limit of characters of a path. But still, I can extend the "path" by manually selecting the missing objects.
    Please assist, thanks in advance.
    "Orginial path":
    1000-06-01GB-12-03.indd "0000-00-01GB-00-01.indd" "0000-00-01GB-01-03.indd" "0000-00-01GB-10-03.indd" "0000-00-01GB-11-11.indd" "0000-04-01GB-00-01.indd" "0000-06-01GB-00-01.indd" "0000-06-01GB-70-04.indd" "0000-06-01GB-90-21.indd" "1000-04-01GB-01-05.indd" "1000-04-01GB-02-03.indd" "1000-04-01GB-03-06.indd" "1000-04-01GB-04-03.indd" "1000-04-01GB-11-02.indd" "1000-06-01GB-01-05.indd" "1000-06-01GB-02-05.indd" "1000-06-01GB-04-11.indd" "1000-06-01GB-08-09.indd" "1000-06-01GB-09-01.indd" "1000-06-01GB-10-07.indd" "1000-06-01GB-11-01.indd" 
    "Pasted Path"
    1000-06-01GB-12-03.indd "0000-00-01GB-00-01.indd" "0000-00-01GB-01-03.indd" "0000-00-01GB-10-03.indd" "0000-00-01GB-11-11.indd" "0000-04-01GB-00-01.indd" "0000-06-01GB-00-01.indd" "0000-06-01GB-70-04.indd" "0000-06-01GB-90-21.indd" "1000-04-01GB-01-05.indd" "

    Jonas_P wrote:
    What software do you refer to specifically?
    That is a limitation of the textbox of your software and has nothing to
    do specially with Win7. Maybe your software behaves different on Win7
    than on WinXP.
    Hello.
    In any software when opening or for example adding files i can select
    multiple files by using alt. Let’s say I select a bunch of files
    within the same folder and gets a path, for example see "Original
    path" below.
    To save time I copy the "Original path". Next time I will open/add
    same files I paste the "Original path" into the open/add dialog. BUT
    unfortunately not all characters are pasted into the text box, in
    this case see "Pasted path" below. I understand that this has
    something to do with the limit of characters of a path. But still, I
    can extend the "path" by manually selecting the missing objects.
    Can you turn off this limitation in Win 7?
    Please assist, thanks in advance.
    "Orginial path":
    1000-06-01GB-12-03.indd "0000-00-01GB-00-01.indd"
    "0000-00-01GB-01-03.indd" "0000-00-01GB-10-03.indd"
    "0000-00-01GB-11-11.indd" "0000-04-01GB-00-01.indd"
    "0000-06-01GB-00-01.indd" "0000-06-01GB-70-04.indd"
    "0000-06-01GB-90-21.indd" "1000-04-01GB-01-05.indd"
    "1000-04-01GB-02-03.indd" "1000-04-01GB-03-06.indd"
    "1000-04-01GB-04-03.indd" "1000-04-01GB-11-02.indd"
    "1000-06-01GB-01-05.indd" "1000-06-01GB-02-05.indd"
    "1000-06-01GB-04-11.indd" "1000-06-01GB-08-09.indd"
    "1000-06-01GB-09-01.indd" "1000-06-01GB-10-07.indd"
    "1000-06-01GB-11-01.indd" 
    "Pasted Path"
    1000-06-01GB-12-03.indd "0000-00-01GB-00-01.indd"
    "0000-00-01GB-01-03.indd" "0000-00-01GB-10-03.indd"
    "0000-00-01GB-11-11.indd" "0000-04-01GB-00-01.indd"
    "0000-06-01GB-00-01.indd" "0000-06-01GB-70-04.indd"
    "0000-06-01GB-90-21.indd" "1000-04-01GB-01-05.indd" "
    Wolfgang

  • Is there a way to lock an object in InDesign SDK so that it can be resized but not moved?..

    Hi
    I am wondering if there is any way to programatically lock a page item (such as a rectangle) so that it cant be moved, but it can be resized..
    Any insight into this would be great help
    thanks

    Hi,
    well, it can be implemented by the means I hinted to in my first mail. Whenever an "illegal" change is made by the user, probably display an alert, and reset the geoemtry change to the prior state by returning kCmdHandled fromt the command interceptor. Beare of the four ways a user can change a spline: 1) Move/resize using the mouse 2) Select and hold down the mouse button until with a move the splines content is also displayed (dynamic) 3) Chnage the splines geometry by specifying the numeric values in th palette, 4) indirect changes by means of grouping such an item and changing the groups geometry. Another way would be in your case by chaning the pages geometry wich would result in a positional change of the spline relative to its page. Maybe you find another way to "illegally" change the splines geometry.
    All of this is nothing for the faint at heart. And it will take some time to be implemented and debugged.
    I will not share my implementation, but if you really stumble at some point in your way making this happen, I probably will give you some hints to move on in the right direction.
    Best,
    Peter

  • C4280 will copy but not print.

    I have a C4280 which has suddenly decided not to print. Oddly, it will copy just fine. The document appears to be stuck in the print queue with a printer error message ("Status: printer error"). I have tried resetting the printer (power off, unplug overnight, reconnect, reboot computer), removing, cleaning and reinstalling the ink cartridges, deleting and reinstalling the printer and nothing changes. I have paused, restarted, deleted, re-sent, etc. the document(s) and I still can't print. My OS is Windows 7.

    Okay, I'm replying to my own question. How this happened I don't know, but the port for the printer got reset (uses of the passive voice, aha) to the Microsoft XPS document writer port. I reset it to USB and now everything's fine. Well, except for the fact that when connected to my desktop computer (I'm using a laptop now), it reinstalls itself every time I boot up the computer. At one point I discovered I had 16 copies of the printer. It still worked somehow. (That system OS is XP Pro.) Any light anyone could shed on that issue would be appreciated.

  • Moving home but not moving into house straight awa...

     Hi
       I am moving out of rented accommodation soon and will not be moving into my new house straight away. I currently have a phone/broadband/vision package that has been running for 6 months. I can't find any paperwork from BT to say how long my contracts are set for. My question is can I cancel the services at my old address and then wait a month or so before having them put on at my new address (while still paying)? (although I would like to cancel Vision as we have not watched it for 4 months). If not I am going to have to cancel all the services and I would not like to know how much that will be.. Any advice would be greatly appreciated
      Cheers
          Steve

    The early termination charges are here: http://www.productsandservices.bt.com/consumerProd​ucts/dynamicmodules/pagecontentfooter/pageContentF​...
    You'd have to add up all the charges for each of the services.

  • How to delete duplicates from iTunes but not hard drive

    I'm running iTunes 10 and have my music stored on both my NAS drive and backup drive.  Each track appears twice on iTunes: once as lossless for streaming and and once as compressed AAC files for synching to ipods and iphones.
    For some reason, when my PC is turned on after being turned on, the linkstation cannon be 'seen' by iTunes, and therefore if I try to play a track, 'the original file cannot be found'.  If I use the 'add folder to library' option in the 'file' dropdown menu, the tracks are located again.
    Unfortunately, I the last time I did this it resulted in 4 copies of each song on itunes; 2 lossless and 2 AAC.
    I have 2 questions:
    Firstly is there an easy way to delete the duplicates from my iTunes library so that I am left with only 1 lossless and one AAC copy, but not deleing the files from my NAS and backup drive?
    Is there a way I can just store my music as lossless, but convert it easily to aa more compressed format for synching to iphone and ipod?
    Thanks!

    You can try my new DeDupe script. It should be able to get rid of the redundant copies while keeping one copy of each track in each format. See this thread for background.
    I've not used the feature, but iTunes can downsample to 128k AAC on the fly as it syncs your devices. Of course you might find the process is too slow for your needs or find that 128k is too much compression.
    tt2

  • HT1473 Help I just moved my music files to a external hard drive and am using the new crappy version ( i know my opinion) of itunes and cant add the files to my libray it gives me the add file to library option but not the add folder to library option wha

    Help I just moved my music files to a external hard drive and am using the new crappy version ( i know my opinion) of itunes and cant add the files to my libray it gives me the add file to library option but not the add folder to library option what am i doing wrong?

    In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"

  • HT3819 how do i get my iTunes library from my old laptop to my new mac (my purchases have moved across but not my own music files)

    How do I get my itunes library from my old laptop to my new imac? My purchases are showing on the new imac but not my own music files.

    iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527 - a somewhat bewildering and not always easily understandable set of options.
    Quick answer if you use iTunes' default preferences settings:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the iTunes Library.itl file in the moved iTunes folder.
    For the record there's this reference for iTunes 11 but it really doesn't strike me as having the specifics you need. iTunes 11 for Mac: Move your library to another computer - http://support.apple.com/kb/PH12168 

  • I accidentally cut instead of copied a folder of previously imported raw files. When I pasted the folder back I could see it in Windows Explore but not in the LR library. How can I work with these files again?

    HI,
    My daughter will often ask me to give her raw files I've taken at family events so that she can process them in her own copy of LR. (I work too slowly, apparently.) Recently I inadvertently cut instead of copied a folder. When I pasted it back I could see it in Windows Explorer but not in my LR library. I thought that re-importing the files might work, LR gave me a message that they were already imported. I expect there is a way to make the files available again in LR and would be grateful for some advice.
    thanks
    Ken

    The solutions is either of the following:
    Adobe Lightroom - Find moved or missing files and folders
    Copy the photos back into the exact same folder and folder location that they were in before
    I don't know what you actually did "when I pasted it back" ... but the bigger issue is that you shouldn't be working with these files in your operating system, period. Once you import them into Lightroom, you don't manage these files in your operating system.

  • I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is j

    I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is just a plain photoshop file, a watermark is added, then save as jpeg - the jpeg is saved to a different folder than the original photoshop file.)  It happens for about 10 of 30/40  files approximately . Thank you, Kathryn

    I believe I have figured it out - I need to flatten the image, even though there are no layers except for layer 0, first.

  • I have a Iphone 4, upgraded to ios 5 with itunes 10.5  Since doing upgarde to both Itunes and Iphone I am not able to add individual songs from my itunes library to my Iphone.  I get a grey listing of the song and the sync symbo but it is not moving.

    I have a Iphone 4, upgraded to ios 5 with itunes 10.5  Since doing upgarde to both Itunes and Iphone I am not able to add individual songs from my itunes library to my Iphone.  I get a grey listing of the song and the sync symbo but it is not moving. Nothing appears on my phone screen.  So not able to add music to my phone and its driving me nuts.....

    iOS 7 requires iTunes 11.1.

  • Printer will not copy but will print from the computer

    Hp Photosmart D110 all in one printer--I am totally disgusted with this printer...have had it a few months.  It will only get about 160 economy pages per ink cartridge which is ridiculous.  So we bought an ink refill kit and just refilled and reinstalled the black ink cartridge.  it is printing from the computer just fine but the printer WILL NOT COPY.  When I use the tool box and check ink levels it just shows question marks on both ink cartridges.
          I spent 45 minutes on HP Chat Support and got no answers except that I need to use genuine HP Cartridges. They could not explain to me why the printer would print but not copy with refilled cartridge.
        Any help from any of you regarding the NOT copying and the ink cartridges.....thanks so much

    Did you ever get it to copy? I have the same problem

Maybe you are looking for

  • Reverting back to Safari 5.1.7

    Back when Safari 6.0 came out, I updated to it but wasn't happy.  At the time my laptop was still under warranty.  I took it in for service and the tech deleted 6.0 and reinstalled 5.1.7 for me.  This occured about 1 year ago. Lately, I have been not

  • Using " " and " " to compare enum's ordinals ?

    heya, I'm just wondering if it's possible to use the "<" and ">" operators with enum types in Java 1.5, in order to compare ordinal values. Basically, I'm thinking of using this for security levels, as in: public enum SecurityLevel { admin, manager,

  • Tow interactive reportes in one site

    Hi everyone, Am now to apex and just getting my feet wet with it, thus this has been my first post. my question is, how can i create a project that includes multiple page with multiple tabes each of wich is an interactive report based on spreadsheet

  • I want to learn more about linux

    So, I started off with Ubuntu about 5 months ago. It was spring break and I got bored of Ubuntu so I decided to install Arch. Things went well and I have never looked back. After about a month of really customizing and figuring stuff out I felt smart

  • Completely disable a specifict key {solved...kinda}

    {Solved} ---> since i couldn't find a way to solve my problem i decided to remove the keyboard and manually cut off the connection of the key, i am glad to say it actually worked and that it seems the rest of my keyboard isn't going haywire i am a bi