Copying column from different table
I want to copy the column of one table1 to table2 column with the condition to add the existing data not to replace
Regards
Sure ->
satyaki>>
satyaki>> CREATE TABLE emp_source
2 AS
3 SELECT * FROM emp;
Table created.
satyaki>>
satyaki>> SELECT COUNT(*) FROM emp_source;
COUNT(*)
14
satyaki>>
satyaki>> CREATE TABLE emp_target
2 AS
3 SELECT * FROM emp WHERE ROWNUM <= 8;
Table created.
satyaki>>
satyaki>> SELECT COUNT(*) FROM emp_target;
COUNT(*)
8
satyaki>>
satyaki>> BEGIN
2 MERGE INTO emp_target et
3 USING ( SELECT * FROM emp_source ) es
4 ON ( et.empno = es.empno )
5 WHEN MATCHED THEN
6 UPDATE
7 SET et.ename = es.ename
8 , et.sal = es.sal
9 , et.mgr = es.mgr
10 , et.deptno = es.deptno
11 WHEN NOT MATCHED THEN
12 INSERT
13 ( et.empno, et.ename, et.sal, et.mgr, et.deptno )
14 VALUES
15 ( es.empno, es.ename, es.sal, es.mgr, es.deptno );
16
17 DBMS_OUTPUT.PUT_LINE(TO_CHAR(SQL%ROWCOUNT) || ' rows merged.');
18 END;
19 /
14 rows merged.
PL/SQL procedure successfully completed.Hope this will help.
Regards.
Satyaki De.
Similar Messages
-
How to update multiple columns from different tables using cursor.
Hi,
i have two tables test1 and test2. i want to udpate the column(DEPT_DSCR) of both the tables TEST1 and TEST2 using select for update and current of...using cursor.
I have a code written as follows :
DECLARE
v_mydept1 TEST1.DEPT_CD%TYPE;
v_mydept2 TEST2.DEPT_CD%TYPE;
CURSOR C1 IS SELECT TEST1.DEPT_CD,TEST2.DEPT_CD FROM TEST1,TEST2 WHERE TEST1.DEPT_CD = TEST2.DEPT_CD AND TEST1.DEPT_CD = 'AA' FOR UPDATE OF TEST1.DEPT_DSCR,TEST2.DEPT_DSCR;
BEGIN
OPEN C1;
LOOP
FETCH C1 INTO v_mydept1,v_mydept2;
EXIT WHEN C1%NOTFOUND;
UPDATE TEST2 SET DEPT_DSCR = 'PLSQL1' WHERE CURRENT OF C1;
UPDATE TEST2 SET DEPT_DSCR = 'PLSQL2' WHERE CURRENT OF C1;
END LOOP;
COMMIT;
END;
The above code when run says that it runs successfully. But it does not updates the desired columns[DEPT_DSCR].
It only works when we want to update single or multiple columns of same table...i.e. by providing these columns after "FOR UPDATE OF"
I am not sure what is the exact problem when we want to update multiple columns of different tables.
Can anyone help me on this ?oops my mistake.....typo mistake...it should have been as follows --
UPDATE TEST1 SET DEPT_DSCR = 'PLSQL1' WHERE CURRENT OF C1;
UPDATE TEST2 SET DEPT_DSCR = 'PLSQL2' WHERE CURRENT OF C1;
Now here is the upated PL/SQL code where we are trying to update columns of different tables --
DECLARE
v_mydept1 TEST1.DEPT_CD%TYPE;
v_mydept2 TEST2.DEPT_CD%TYPE;
CURSOR C1 IS SELECT TEST1.DEPT_CD,TEST2.DEPT_CD FROM TEST1,TEST2 WHERE TEST1.DEPT_CD = TEST2.DEPT_CD AND TEST1.DEPT_CD = 'AA' FOR UPDATE OF TEST1.DEPT_DSCR,TEST2.DEPT_DSCR;
BEGIN
OPEN C1;
LOOP
FETCH C1 INTO v_mydept1,v_mydept2;
EXIT WHEN C1%NOTFOUND;
UPDATE TEST1 SET DEPT_DSCR = 'PLSQL1' WHERE CURRENT OF C1;
UPDATE TEST2 SET DEPT_DSCR = 'PLSQL2' WHERE CURRENT OF C1;
END LOOP;
COMMIT;
END;
Please let us know why it is not updating by using using CURRENT OF -
Columns from different tables displayed in an ADF table format
I have a many to one relationship between 2 tables (checklist -> subcontract). I would like to display columns from each table on a web page in an ADF Read Only Table format. I created a method that returns the data I need from the tables. When I drag that method over to my page JDev I'm only allowed to select columns from either the checklist table OR the subcontract table. I need one column from the subcontract table and several columns from the checklist table. I'm using JDev 10.1.3.2 and an Oracle 11g database. Thank you in advance.
-WadeThank you for your response. I ended up creating a new getter in the Checklist table which refers to the column in the Subcontract table. Then I was able to create a table column for that returned value.
Thanks again!
-W -
How to dynamically copy cells from different tables?
Hi,
I've created an invoice and have 2 different tables. First is at top with Recipient information, the invoice number, their address, etc. Below that, I have a 2nd table laying out the items they are being charged for.
I would like to copy the invoice number from the 1st table, to a cell in the 2nd table or a 3rd table I will create later on. I know how to copy cells in 1 table, ie. =D4. But not sure how to target a different table altogether.
Also, is it possible to copy a cell from 1 table to a text box field?
Thanks!!Yvan's point is true. Please use the User Guides first; they're actually pretty readable.
However, there's a very quick & easy way to try it out as well. Go to the cell where you want your data to end up. Type "=" (without quotes) to indicate you're going to input a formula of some kind. Then without clicking inside any tables, use the list of sheets and tables to the left to get to your source table and click on the cell that contains the data you want to copy. Presto! Go back to your destination cell, and the formula is now filled in, following the scheme Yvan provided.
Vince -
Question about suming two columns from different tables in Subquery?
Hello everyone,
I have a subquery that works great for getting the total SUM of a Billing table, but I also need to add to that SUM the total surcharges or additional charges from a separate table. I tried this by doing something like so:
(SELECT SUM(SUM(Amount) FROM Billing WHERE Billing.JobID = Jobs.ID AND Billing.BillingType = 'Invoice' AND Billing.InvoiceCanceled = 'No', SUM(Payment) FROM Payments WHERE Payments.JobID = Jobs.ID AND Payments.Type = 'Bill')) as [Amount],
But it doesn't work as there is an incorrect syntax near 'FROM'. I'm assuming this is because of the two FROM's in the Subquery? But I am not sure how else I would be able to do this then?
Any help would be greatly appreciated. I just noticed this bug and am hoping to get a fix out as quickly as possible.
Thanks Again,Hi, sorry for taking so long to get back to this post.
I tried this example like so:
(SELECT SUM(A1) AS Total1, SUM(A2) AS Total2
FROM
(SELECT
(SELECT SUM(Amount) FROM Billing WHERE Billing.JobID = Jobs.ID AND Billing.BillingType = 'Invoice' AND Billing.InvoiceCanceled = 'No') AS A1,
(SELECT SUM(Payment) FROM Payments WHERE Payments.JobID = Jobs.ID AND Payments.Type = 'Bill') AS A2),
However, get an error that an Incorrect Syntax exists near the ','. I remove the comma (Which I think should be there), and I get an error that an Incorrect Syntax exists near the '.'...
I also tried doing it like this (Based on other suggestions I've found online:
(SELECT SUM(SELECT SUM(Amount) FROM Billing WHERE Billing.JobID = Jobs.ID AND Billing.BillingType = 'Invoice' AND Billing.InvoiceCanceled = 'No') as [Amount],
(SELECT SUM(Payment) FROM Payments WHERE Payments.JobID = Jobs.ID AND Payments.Type = 'Bill') as [Additional]),
And I get an error that an Incorrect Syntax exists near 'SELECT'...
I also tried doing something like this with the SQL I already had...
(SELECT SUM(Amount) FROM Billing WHERE Billing.JobID = Jobs.ID AND Billing.BillingType = 'Invoice' AND Billing.InvoiceCanceled = 'No') as [BilledAmount],
(SELECT SUM(Payment) FROM Payments WHERE Payments.JobID = Jobs.ID AND Payments.Type = 'Bill') as [Additional],
SUM(BilledAmount + Additional) AS [TotalBilled],
But I get an error that the alias' are Invalid Column Names... I have used Alias' before so I'm not sure why this would be an issue here...
As you can see, I've been trying to figure this issue out, but haven't had much luck... :( -
Matrix with Info Columns from different Table
Hi, how can i manage to have a column in a matrix that doesn't represent a value of the table the other columns are using?
For example, i have a matrix and this matrix has values of the UDT (@Table) and one column contains the projectcode. now i want one column in my matrix to show the project name of the OPRJ. how can i manage that, so that the value of this column in the matrix changes when i change the value of the other column with the project code?
best regards
PhilippHi
1) You can fill the matrix from Recordset.
For example: UDT is [@O01_USERTABLE].
PrjCode foreign key to the Projects table (OPRJ - not exposed through the DI API).
So, if you type correctly PrjCode, you can fetch description using method below.
Dim sSql As String = ""
sSql = " SELECT U.PrjCode AS PrjCode, S.PrjName As PrjName" & _
" FROM [@O01_USERTABLE] AS U, OPRJ AS S" & _
" WHERE U.PrjCode = S.PrjCode"
oRS = SBO_Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
oRS.DoQuery(sSql)
If oRS.RecordCount > 0 Then
Dim i As Integer = 0
oRS.MoveFirst()
While oRS.EoF = False
i = i + 1
oForm.DataSources.UserDataSources.Item("uNr").Value = i ' 1" matrix column for row number
oForm.DataSources.UserDataSources.Item("uPrjCode").Value = oRS.Fields.Item("PrjCode").Value
oForm.DataSources.UserDataSources.Item("uPrjName").Value = oRS.Fields.Item("PrjName").Value
oMatrix.AddRow()
oRS.MoveNext()
End While
End If
2) On ManageDataEvent, call Matrix_FetchDescriptions(...)
Public Sub ManageDataEvent(ByRef BusinessObjectInfo As SAPbouiCOM.BusinessObjectInfo, ByRef BubbleEvent As Boolean)
Dim oForm As SAPbouiCOM.Form = SBO_Application.Forms.Item(BusinessObjectInfo.FormUID)
If BusinessObjectInfo.EventType = SAPbouiCOM.BoEventTypes.et_FORM_DATA_LOAD Then
If Not BusinessObjectInfo.BeforeAction Then
Try
oForm.Freeze(True)
Dim oMatrix As SAPbouiCOM.Matrix
oMatrix = oForm.Items.Item("mtx00").Specific
If oMatrix.RowCount > 0 Then
Call Matrix_FetchDescriptions(oForm, -1)
End If
Catch ex As Exception
Finally
oForm.Freeze(False)
oForm.Update()
End Try
End If
End If
oForm = Nothing
End Sub
' Update column Name
Private Sub Matrix_FetchDescriptions(ByRef oForm As SAPbouiCOM.Form, ByVal iRow As Integer)
Dim oMatrix As SAPbouiCOM.Matrix
Dim oColumn As SAPbouiCOM.Column
Dim oCell As SAPbouiCOM.Cell
Dim oEdit As SAPbouiCOM.EditText
Try
If SBO_Company.Connect Then
oMatrix = oForm.Items.Item("mtx00").Specific
If oMatrix Is Nothing Then Throw New Exception("ERROR: matrix object is nothing")
Dim iNrRows As Integer = oMatrix.RowCount ' iRow
If iNrRows > 0 Then
Dim i As Integer = 1
For i = 1 To iNrRows
Dim sCode As String = ""
Dim sName As String = ""
Try
' Matrix column PrjCode
oColumn = oMatrix.Columns.Item("ePrjCode")
oCell = oColumn.Cells.Item(i)
oEdit = oCell.Specific
sCode = oEdit.Value
sName = GetNameByCode(sCode)
If Not sName.Equals("") Then
' Matrix column PrjName
oColumn = oMatrix.Columns.Item("ePrjName")
oCell = oColumn.Cells.Item(i)
oEdit = oCell.Specific
oEdit.Value = sName
End If
If iRow = i Then Exit Sub
Catch ex As Exception
Finally
End Try
Next
oForm.Refresh()
End If
End If
Catch ex As Exception
' log exception
Finally
oMatrix = Nothing
oColumn = Nothing
oCell = Nothing
oEdit = Nothing
System.GC.Collect() 'Release the handle to the table
End Try
End Sub
To get Name using Code...
Private Function GetNameByCode(ByVal sCode As String) As String
If sCode.Trim.Equals("") Then Return ""
Dim sName As String = ""
Dim oRS As SAPbobsCOM.Recordset
Try
oRS = SBO_Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
Dim sSql As String = "SELECT PrjName FROM OPRJ WHERE PrjCode = '" & sCode.Trim & "'"
oRS.DoQuery(sSql)
oRS.MoveFirst()
While oRS.EoF = False
sName = oRS.Fields.Item("PrjName").Value()
Exit While
End While
Catch ex As Exception
Finally
If Not oRS Is Nothing Then
System.Runtime.InteropServices.Marshal.ReleaseComObject(oRS)
oRS = Nothing
End If
End Try
Return sName
End Function
Note: Matrix_FetchDescriptions() have second argument (iRow As Integer) what may be used to indicate in what row you need to update PrjName column.
May be ItemManagment event when item pressed can be used... Try
HTH
BR
Sierdna S. -
How to get only column names from different tables as single table columns
Hi All,
I have one requirement in which we want only column names from different tables.
for example :
I have three tables T1 ,T2, T3 having
col1 clo2 clo3 --> T1 ,
col3 col5 ,clo6 --> T2 ,
Clo6 col8 col9 --> T3
columns i want to get only all Column names from all table as single Resultset not any data from that how can i get that empty resultset
because this empty result i want to bind in datagridview(front end) as Empty resultset
Please tell me anyways to do this
Niraj SevalkarIf I understand you want an empty result set, just with metadata. SET FMTONLY do the trick:
SET FMTONLY ON
SELECT Col1, Col2, Col3, ....., Coln
FROM
T1 CROSS JOIN T2 CROSS JOIN T3
SET FMTONLY OFF
Another alternative is to include an imposible contition
SELECT Col1, Col2, Col3, ....., Coln
FROM
T1 CROSS JOIN T2 CROSS JOIN T3
WHERE 1 = 0
If you are using a SqlDataAdapter in your client application. You can use the FillSchema method. the select command may be any select statement that returns the columns you want. Under the covers FillSchema will call SET FMTONLY ON.
If you are using SqlCommand.ExecuteReader you can pass SchemaOnly to CommandBehavior argument. SET FMTONLY ON is called under the covers. Again the select command may be any select statement that returns the columns you want.
"No darás tropezón ni desatino que no te haga adelantar camino" Bernardo Balbuena -
Report using Data from different tables
Hello,
I am trying to convert a Cobol batch program to Oracle 6i tabular report.
The data is fetched from many different tables and there are lots of processing(i.e, based on the value of a column from one table need additional processing from different tables) required to generate the desired columns in the final report.
I would like to know what is the best strategy to follow in Oracle Reports 6i. I heard that CREATE GLOBAL TEMPORARY TABLE is an option. ( or REF CURSOR ?) I do not know much about its usage. Can somebody guide me about this or any other better way to achieve the result.
Thank you in advance
PriyaHello,
There are many, many options available to you, each of which has advantages and disadvantages. This is why it is difficult to answer "what is best?" without alot more details about your specific circumstances.
In general, you're going to be writing PL/SQL to do any conditional logic that cannot be expressed as pure SQL. It can executed in the database, or it can executed within Reports itself. And most reports developers do some of both.
As a general rule, you want to send only the data you need from the database to the report. This means you want to do as much filtering and aggregating of the data as is readily possible within the database. If this cannot be expressed as plain SQL queries, then you'll want to create a stored procedures to help do this work.
Generally, the PL/SQL you create for executing within the report should be focused on control of the formatting, such as controlling whether a field is visible, or controlling display attributes for conditional formatting.
But these are not hard and fast rules. In some cases, it is difficult to get all the stored procedures you might like installed into the database. Perhaps the dba is reluctant to let you install that many stored procedures. Perhaps there are restrictions when and how often updates can be made to stored procedures in a production database, which makes it difficult to incrementally adjust your reports based on user feedback. Or perhaps there are restrictions for how long queries are allowed to run.
So, Reports offers lots of options and features to let you do data manipulation operations from within the report data model.
In any case, Oracle does offer temporary table capabilities. You can populate a temp table by running stored procedures that do queries, calculations and aggregations. And you can define and initiate a dynamic query statement within the database and pass a handle to this query off to the report to execute (ref cursor).
From the reports side, you can have as many queries as you want in the data model, arranged in any hierarchy via links. You can parameterize and change the queries dynamically using bind variables and lexicals. And you can add calculations, aggregations, and filters.
Again, most people do data manipulation both in the database and in Reports, using the database for what it excels at, and Reports for what it excels at.
Hope this helps.
Regards,
The Oracle Reports Team --skw -
Count(*) , group by with multiple columns from multiple tables involved
Hi all,
I am relatively new to SQL.
Currently I have these few requirements, to display quite a number of fields from 3 tables for display of report.
In my query I need to:
1.) count(*)
2.) select quite a number of fields from table 1,2,3
However when count(*) is used, grouped by has to be used to.
How do I actually use group by with so many columns to be selected?
I have actually used the query below, but the count(*) returns 1, the correct output should be 3 instead.
select count(*), table1.col1, table1.col2, table1.col3, table2.col3, table2.col4, table2.col6, table3.col1, table3.col4, table3.col5
from table1, table2, table3
where
<conditions>........................
group by table1.col1, table1.col2, table1.col3, table2.col3, table2.col4, table2.col6, table3.col1, table3.col4, table3.col5
I know this group by statement looks very unrefined. How can I select multiple fields from different tables, and yet get the count(*) correctly?
Thank you so much for your time.Hmm yes it actually does return count as 1 for each row. But there are 3 rows returned. E.g.
ctr table1.col1 table1.col2 ..........
1 value1 value1
1 value2 value3
1 value3 value4
If I put the count(*) outside, it returns 3 , the correct output
ctr
3
select count(*) from
select table1.col1, table1.col2, table1.col3, table2.col3, table2.col4, table2.col6, table3.col1, table3.col4, table3.col5
from table1, table2, table3
where
<conditions>
group by table1.col1, table1.col2, table1.col3, table2.col3, table2.col4, table2.col6, table3.col1, table3.col4, table3.col5
Thus I was wondering if it was the group by of multiple colns that resulted in the count stucked at value 1. -
Including column from fact table reduces number of rows returned
Hello
I am facing this issue where in a report I select 5 columns from a fact table. Out of these five columns one of the column is "Amount" for which the aggregation rule is defined as Sum in RPD.
When I include these five column and filter results based on some criterion , I get all the rows (three rows) that satisfy the criterion. No I add a sixth column to my report and suddenly I only see one row returned by my report. Addition of this sixth column does not affect the criterion as the criterion is not based on this column. But this sixth column is a calculated column.
I tried different things but because the report was just getting columns from one table (fact) and suddenly inclusion of one column leads to reduction in number of rows , I was unable to find any reason why would that happen.
So I thought that some one in community may know that in what scenario this happens.
ThanksAre there any repeated values? I'm wondering if what you're seeing is actually suppression of repetition in the results. Edit the analysis, go to the criteria tab, click column properties, go to the Column Format tab, and change the setting for value suppression from 'Suppress" to "Repeat". Repeat for each of your 6 columns and check the outcome.
Otherwise, I would try testing with other calculations and also bring in some columns from dimension tables to see how this affects the result. You should be able to come up with a case-by-case scenario to work out exactly what causes the rows to be suppressed which will get us one step to closer to working out why the rows get suppressed.
Thanks,
George -
Stored procedure in package return multiple columns from multiple tables
Hi ,
Can a single stored procedure return multiple column values from different tables.
example:
tabA: col2, tabB:col3,tabC:col4 etc.
one more question:
if a stored procedure like to return 10 columns for a particular record from a single table do i need to define a TYPE statement for each colum like
TYPE col1 is TABLE of varchar
TYPE col2 is TABLE of varchar
here i want to return only one row, not many rows.
thanksYou can try one procedure with OUT or IN/OUT parameters that collect the values from one or more sql statements.
CREATE OR REPLACE PROCEDURE P1
(P_COD IN TABLE.COD%TYPE,
P_DESC1 OUT TABLE1.DESC1%TYPE,
P_DESC2 OUT TABLE2.DESC2%TYPE)
IS
BEGIN
SELECT table1.DESC1, table2.DESC2
INTO P_DESC1, P_DESC2
FROM TABLE1, table2 WHERE
table1.COD = P_COD and
table1.cod = table2.cod ;
END P1;
JP -
How to Query Multiple Fields from different Tables using Toplink Expression
Hi,
I am trying to prepare an Oracle Toplink Expression to qurey the multiple columns of different tables. the query as following. Please can anyone help?
SELECT CYCLE.CYCLE_ID,
CYCLE.ASPCUSTOMER_ID,
CYCLE.FACILITYHEADER_ID,
CYCLE.ADDUSER,
ASP.FIRSTNAME || ' ' || ASP.LASTNAME ADDUSERNAME,
CYCLE.ADDDATE,
CYCLE.LASTUPDATEUSER,
ASP.FIRSTNAME || ' ' || ASP.LASTNAME LASTUPDATEUSERNAME,
CYCLE.LASTUPDATEDATE,
CYCLE.CYCLENAME,
CYCLE.CYCLENUMBER,
CYCLE.DESCRIPTION
FROM CYCLE,ASPUSER ASP
WHERE CYCLE.ADDUSER = ASP.ASPUSER_ID
and then i want to send that expression to readAllObjects method as a parameter
Expression exp = (..............this is the required qurey expression...................)
Vector employees = session.readAllObjects(getClass(), exp);
thanks,You havent given any information on the mapping between Cycle and Asp. I presume there is a one to one mapping between them. Also it appears there is no "WHERE" clause to limit the number of cycles being retrieved. If that is the case then I presume you want to load all cycles in the system.
Thats just a clientSession.readAllObjects(Cycle.class). If you have indirection turned on the Asp should get loaded when you do a cycle.getAsp().
I presume that SQL you posted loads all the columns of CYCLE and ASP. If you are interested in a subset of CYCLE or ASP then you should do a ReportQuery or partial object read.
Hi,
I am trying to prepare an Oracle Toplink Expression
to qurey the multiple columns of different tables.
the query as following. Please can anyone help?
SELECT CYCLE.CYCLE_ID,
CYCLE.ASPCUSTOMER_ID,
CYCLE.FACILITYHEADER_ID,
CYCLE.ADDUSER,
ASP.FIRSTNAME || ' ' || ASP.LASTNAME ADDUSERNAME,
CYCLE.ADDDATE,
CYCLE.LASTUPDATEUSER,
ASP.FIRSTNAME || ' ' || ASP.LASTNAME
LASTUPDATEUSERNAME,
CYCLE.LASTUPDATEDATE,
CYCLE.CYCLENAME,
CYCLE.CYCLENUMBER,
CYCLE.DESCRIPTION
FROM CYCLE,ASPUSER ASP
WHERE CYCLE.ADDUSER = ASP.ASPUSER_ID
and then i want to send that expression to
readAllObjects method as a parameter
Expression exp = (..............this is the required
qurey expression...................)
Vector employees = session.readAllObjects(getClass(),
exp);
thanks, -
How to copy data from transparent table to our own ceated z table?
How to copy data from transparent table to our own ceated z table?
Plz tell me different methods and which one is best?
Is get data from sflight into table z* is correct?Hi Ajay,
let us consider you have to copy EKKO table to ZEKKO table
1. In ABAP program define internal table based on EKKO
<b> eg: i_ekko</b>
2. Select the data from EKKO to i_ekko
<b> eg: select * from ekko into table i_ekko.</b>
3. insert into Z-TABLE from the internal table
<b> eg: INSERT EKKO FROM TABLE I_EKKO.
COMMIT WORK.</b>
<u>To insert in internal table you can use the following:</u>
1. INSERT [wa INTO|INITIAL LINE INTO] itab [INDEX idx].
2. INSERT [wa INTO|INITIAL LINE INTO] TABLE itab.
3. INSERT LINES OF itab1 [FROM idx1] [TO idx2] INTO itab2 [INDEX idx3].
4. INSERT LINES OF itab1 [FROM idx1] [TO idx2] INTO TABLE itab2.
<u>To inert in database table, use the following:</u>
1. INSERT INTO <dbtabname> [CLIENT SPECIFIED] VALUES wa.
2. INSERT <dbtabname> [CLIENT SPECIFIED] FROM TABLE itab.
3. INSERT <dbtab> [CLIENT SPECIFIED]. oder
4. INSERT <dbtabname> [CLIENT SPECIFIED] ... .
<b>Reward points.. if helpful.
Cheers !
Moqeeth.</b> -
How to use a USER_DATASTORE to index multiple columns in different tables
I would appreciate if somebody can give an example or point to links with examples on how to use USER_DATASTORE on multiple columns in different tables. THe Oracle Text documentation only shows multiple columns in the same table.
Thanks in advance.I am not sure why your getting the wrong results but you should seriously reconsider the approach your are taking. Using functions like this is very ineffecient and should be avoided at all cost.
-
How to delete a column from the table control in module pool?
Hi,
can any one please tell How to delete a column from the table control in module pool?
thanks in advance
warm regards
HareeshKumar Nhi hareesh,
I think it is better to hide it.
How to hide: You can check this link
Dynamic Hide column in table control
Maybe you are looking for
-
"BCP Commit Failed" New Install On Windows 2008 R2 with SQL Server 2008 R2
I am installing a new Netweaver install on a virtual machine loaded with Windows 2008 R2 and SQL Server 2008 R2. The install gets to the "Import ABAP" phase and just hangs. SAPINST says it is still running, but there is no activity to suggest there i
-
'Instant help' from your 'awesome support people' is a joke!
I've been trying for two and a half weeks to get a response now. My PC on which I had Digital Editions crashed and when I downloaded DE (from Kalahari.com where I had bought my e-books) onto my new PC and tried to open my e-books I got a message E LI
-
Didn't download, but got a malware email
I just got the NACHAm "Your payment has been rejected and read the .exe attachment" Zeus malware email today (it's been floating around since 2009). I don't have Windows or any window apps on my Mac, and am running 10.6.8. As soon as I saw this I had
-
Outlook Connector for Office 2007
The connector install fails when Outlook 2007 is installed. Is there a new version coming, or a work around?
-
Since downloading ios 7, my mail app will not open. Help!
My mail app will not load. I select it, The screen turns white, and then it closes. I have reset and deleted accounts to no avail.