Copying Crystal Report layout from Sales Order to Delivery etc

Good afternoon!
I have created a really lovely Sales Order layout in Crystal!  It is the best!
Is there any way to copy this layout to a Delivery Note so it picks up the correct tables?  I would love it
Thanks
OB

Open the report in Crystal Designer, select the menu option Set data source location.
In the top part, choose the table you need to change, then in the bottom bit find the table you want to replace it with and choose update. Do this with each of the tables you ned to change and they will update the source for you.
Other wise, import into SAP as a layout, the export as a Bip package. when you import it, choose it as a master layout and assign it to the forms you want to use it with and SAP will do the rest

Similar Messages

  • Copy "Ship to party" from sales order to "Delivery addreess" in PO

    Hi All,
    when i create a Purchase Order in ref to the Purchase Requistion of the Sales Order, I want the Ship to Party address from line item of the Sales Order needs to get copied to the Purchase Order line item in "Delivery address" tab of the PO.
    Please tell me the required configuration settings to achieve this.
    Awaiting your responses.
    Thanks in advance.
    Rgds.
    Anil.

    Hi All,
    This is a third party scenario. And in third party scenarios I guess the ship to party address from sales order will be automatically copied into the delivery address of the PO (Standard Functionality of SAP). But some how this is not happening and use to happen till the sixth week. Do I still need to check the enhancements given by the experts above? or we can achieve this with some configuration settings from schedule lines etc?
    Rgds,
    Anil.

  • Copy the pricing conditions from Sales Order to Delivery

    Hi all,
    I have to send the princing conditions from the delivery trough Idoc.
    That's the reason why I need the princing conditions in the delivery. But I can't redetermine the pricing procedure in the delivery creation. I need to copy the pricing conditions from order to delivery.
    Because if there is any manual modification of a condition in the sales order, If I redeterminate the pricing procedure in the delivery, I would lost the changes.
    Anybody knows any User Exit or anyway to copy the pricing conditions from SO to Delivery?
    Thanks in advance

    I think pricing will not determine in delivery, if any shipmentchanges will copy to delivery, not standard pricing.
    Logically, when you create delivery by that time your pricing need to finsh, no changes, so send pricing infor from order to customer, as its standard process in any client.

  • Can't change quantity when copy from Sale order for Delivery

    Hi all!
    Can i use authorization for can't change quantity when copy from Sale order for Delivery.

    Tien,
    Approval will not work when you have mutiple rows of data.  You would have to work with SP Transaction Notification
    There has been threads before on the forum on the same topics.
    Block the Quantity in Sales Delivery
    Approval Procedure for chaning quantity in Delivery Document
    Suda

  • Copy Net Value(VBAK-NETWR) from sales order to Delivery VL02N

    Hi all,
    Please can anyone help me with this? When the sales order is saved we need to move the net value to the any field in the delivery.
    Thanks
    Jasmeet

    Hi,
    This is a standard SAP functionality that values from sales order will be copied to billing and not to delivery.
    In fact values from both sales order and delivery are copied to billing.
    If you want to copy that you would need to copy the same in some empty field in the delivery document and that too with some BadI or user exit ZE_SHP_TAB_CUST_HEAD.
    This user exit will create an additional tab in delivery header and you can copy the pricing value from sales order to any field in this tab.Developer can confirm the same.
    Regards
    Karan

  • Dynamic data flow from sales order to delivery and vice-versa

    Hi Experts,
    One of our teams working for a client (transportation industry) on ECC 6.0 is facing an issue in relation to copying of partner data. (Ship-to-party address field changes to be precise)
    Currently, whenever the partner address data changed in a Sale order, though delivery is already created prior to this change, the change done is dynamically getting reflected in delivery too. Further, if the partner data in the delivery is changed, this also is getting updated on the preceding document i.e. sales order.
    We have checked the copy controls under VTLA and didn’t find any specific modifications made in this regard. Our question is:
    Is there any configuration available in standard SAP through which the data updates (like header data viz. partner field data etc.) get dynamically updated forward and backwards in a sales flow(i.e. from sales order to delivery and vice-versa)
    Your help on this will be highly appreciated.
    Regards,
    Jagan

    if the partner data in the delivery is changed, this also is getting updated on the preceding document i.e. sales order.
    The standard functionality is if you change the address of a partner function, the same will get reflected in an existing sale order.  This being the case, can you reconfirm your statement that in delivery, if you change the partner function, the same will get updated in sale order also?
    G. Lakshmipathi

  • Quantity is different from sale order and delivery

    Hi,
    Gurus,
    Quantity is different from sale order and delivery.
    I identified the Material in the sales order, the item category for this material as BOM.
    I have also checked the bill of material display header overview. The Base Quantity maintained as 1000 EA3. The SUBITEM maintained in G in the unit field in bill of material display.
    Accordingly i have checked the same for material master's additionl data in Units of Measure tab, it is mentioned the basic unit as 1000 EA3 and alternative unit as 600 G.
    My client processed the order for 100 QTY. The QTY for the two sub item is 99.601 each in the sale order.
    My client Question is why in delivery the Material Qty is coming as 99.730 and the SUB ITEM is coming as 99.330 EACH.
    Note:- The material X is maintained in EA3 in Bill of material header overview. I do no how the sale unit came as G for the Material in sale order.
    The other two sub item is perfectly coming as G. Because it is maintained in G in the Bill of Material Display.
    Guide me GURUS.
    Thanks and Regards,
    ANAND

    Hello Rumar
    I guess you entered the text manually in the sales order. The Ship-to may not be having any text, but the Sold-to may be and it may be coming from sold to.
    In transaction VOTXN, check the access sequence for the text type id and see which one takes precedence - one from customer master or from the order by checking the order of accesses.

  • Need to copy a custom field from sales order to billing document

    Hi All,
    I have a requirement, I need to add a new field in the sales order header part and even a field in the billing document, once i add this field up in both the documents in the header part i need to create a copy routine using the VOFM tran, can any body help me on what's the procedure to add a field in billing document and does the copy routine transfer the data ( Custom Field ) from Sales Order to the Billing Document, if yes can somebody help me with the procedure on how to and code of it.
    solved it myself ....
    Regards.
    Message was edited by: seshi
            seshi

    Hello,
    Regarding item 1, is it in the region of the global links (ie logout, home, preferences, etc.)? If not, have you tried creating a link via personalizations to the region you wish to have the link displayed (item type = link, destination = fully qualified name of your .xml page/region?
    Regarding item 2, you may have to create the custom subtab programatically using the controller for the region of the current subtab layout.
    Regarding item 3, you can also add a submit button to the page button bar region via personalizations. You can then add any logic you want to the button in the controller for the page.
    Hope this helps.

  • Create Billing Document from Sales Order (Without Delivery)

    Dear Experts,
    Pls note, presently we are creating Billing Document (VF01) from Outbound Delivery Number after Post Good Issue. All sales Document like Billing Document, Output Type, Invoice Type has been configured for this process and we are doing this without any error. Fyki, we have configured lots of Z Order, Billing & Delivery type to do this processes.
    But for one of this order type we need not do any delivery. We want to create Billing Documents from sales order directly (without doing any Outbound Delivery).
    So, would u pls advise the steps how can we configure and assign Order Type, Billing Type or any other type  to meet above requirement.
    Thanks in advance.
    Best Regards.
    Ripon

    Hi
    There are two most important configuration:-
    1) In VOV8 for your Order Type maintain the Order Related Billing Document
    2) Maintain the Copy control setting in VTFA betwwen your Order Type and billing Type.
    Also note that if your line item is not require to be delivered then for your Item category maintain (in VOV7) not relevant for delivery and not relevant for scedule line.
    Regards
    Amitesh Anand
    Edited by: Amitesh Anand on May 24, 2010 5:09 PM

  • Link from sales order to delivery not complete

    2007A
    We have a few cases where the link from a sales order to delivery is not complete. For example, we have a sales order with 2 lines on it. We copy to delivery and add. Remarks field has the comment "based on sales order ...." However if you try to get to base document the icon is not available. In looking at the base document, base reference, base line fields on the items they are blank.
    We also have instances of this where there were 20 lines on a sales order, we copy to delivery and 19 lines are linked but one is not.
    Any ideas as to why this might be happening?

    Hi Keith ,
    It looks like an application error to me if the action is straight forward - copy from SO to Delivery .
    If you can replicate the issue , it is definitely a bug and you probably need to test with upgrade if it is happening or not .
    So far , I would look for a higher version of patch and see if that issue is particularly addressed and resolved .
    Also use this query for more help
    SELECT DISTINCT T0.DocNum FROM ODLN T0, DLN1 T1 WHERE (T0.DocEntry = T1.DocEntry) AND (T1.BaseEntry = [%0] OR T1.BaseRef = [%1])
    Hope this helps
    Bishal
    Edited by: BIshal Adhikari on Dec 11, 2009 9:47 AM

  • Carrier from sales order to delivery

    Hi all,
      In a sales order, there is a field for carrier in tab 'Partners'.   Going forward, we like to get products from multiple plants A,B and C in the same order.  It used to be that we only create 1 order for the same plants.    When we create deliveries for an order with 3 different plants, then it will create 3 deliveries since we are going to  split it by plants.   The question is:  Each deliveries will use the same carrier though those plants should not use the same carrier.  This is due to the one carrier coming from sales order.
    I want to have different carrier on the delivery depending on the plant.  
       Q: Would anyone know where or how to make changes to get the correct carrier into each delivery ?
       Q: Is it common for a company to create one sales order only for the same plant ?
      Can anyone pls share your thoughts and any suggestions are welcome.
    thank you.
    Joyce

    Hi Sridhar,
            I would need to change for the carrier from header to item level.  At the moment, it is still at header level.   In the mean time, i changed the carrier on the line item.  I noticed that freight for the carrier is incorrect after the change.  The pricing on carrier did not get updated correctly.  I try to select 'Redetermine freight price'   but the price did not get updated.  I assume partner determination will  put in the correct pricing for the different carrier at line item level.  Is my assumption correct ?
    thanks
    Joyce

  • Discount % from Sales Order to Delivery/ AR Inv

    Hi,
    At times when Delivery is created from Sales order the discount % is not reflected and the field is blank. This is happening with random BP. The user ID has 100% discount authorization.
    Any idea for the reason.
    Thanks,

    Dear
    Please check Inventory >Price List >Special Price List
    Here you check any discount allocate to you BP or not.
    This may be a reason.
    Regards
    MANGESH PAGDHARE.

  • Crystal report link between sales order and picklist

    Hi,
    Good day!
    I am making a picklist document using crysal report. My requirement is to show the sales order number, cardcode, cardname, itemcode, released qty in the picklist. the tables i linked in crystal are the ff:
    RDR1.DocEntry linked to ORDR.DocEntry and ORDR.DocNum linked to PKL1.OrderEntry.
    I have a sales order with 2 items and then I processed picklist for it. When I run the report, my problem is that it shows the items twice.
    Scenario:
    Sales Order 1:
    Item A   2
    Item B   1
    When I run the report, it's like this:
    Item A 2
    Item A 1
    Item B 2
    Item B 1
    I'd already tried adjusting the links but still can't get it.
    Please help me.
    Thanks so much.
    SIncerely,
    Jackilou

    Hi,
    could you please describe how you solve this issue?
    Thank you very much!
    Regards,
    Tobias

  • Want to copy Serial number from Sales Order to Delivery

    Hi Gurus, I want to copy the serial number from the sales order to the delivery. ¿How can I do this?
    Thanks in advance
    -ITalo

    Please check if you get some helpful tip from the link below:
    http://help.sap.com/bp_bl603/BBLibrary/HTML/126_EN_IN.htm
    Regards,
    Rajesh Banka

  • Copy control from Sales order to Delivery field FAKSK (Billing Block)- VTLA

    Hi All,
    I'm facing a standard issue, inputs and resolution from you would be appreciated,
    Issue is, If we put the Billing block in Sales order header this should not allow us to create an Invoice, But in my examples i can create the Invoice without any errors!
    The billing block from SO will be copied into Delivery header? if yes this will definitely not allow in my cases to create an Invoice, but i cannot see the Billing block copied into my Delivery! any Copy control settings missing?
    Why the Invoice will not check the Billing block from Order while creation?
    Thanks and best regards,
    Siddaram

    The billing block from SO will be copied into Delivery header? if yes this will definitely not allow in my cases to create an Invoice, but i cannot see the Billing block copied into my Delivery! any Copy control settings missing?
    Check Copy settings in VTLF tcode. Target is your delivery type. Source is your Sales Order type. Double Click to see Data transfer. Click on the small icon in field Header Data. Find your routine number and select source text. Look at the code if there is mention about LIKP-FAKSK field. You don't have ABAP, search the forum or google on how to comment it on your own to remove this data transfer.
    Why the Invoice will not check the Billing block from Order while creation?
    Check Copy settings in VTFA if it is Sales Order to Billing or VTFL if it is Delivery to Billing. Do something like above to find routines. But this time round is to check Copying requirements not data transfer and it can be at billing type level or at item level. If no check on VBAK-FAKSK field, you can copy the standard routines or make modification to customized routines to build the requirements checks. If no ABAP, search google on how to change routines.

Maybe you are looking for