Copying data from CD drive to HD
When trying to copy files from a CD- rom to the HD part of the data will copy and I then get the message "copy failed as part of the file "file name" could not be read or written". This happens on different discs and not always on the same file on the same disc (sometimes a file will copy and sometimes it won't).
Also, sometimes when trying to restore a disc image file using finder it attempts to verify the image and then gives the error "codec overrun".
If anyone could give me some ideas on this it would be most appreciated.
are you getting an error code -50?
If so reboot the computer and try again.
Similar Messages
-
2006 iMac running 10.4 OS. I copied files to ext. drive. Put in 10.6 disc and did a clean install (format) of 10.6. Copied data from ext. drive back to Mac. I didn't get all the files. CAN I REVERT BACK TO THE 10.4 OS SO I CAN COPY MY DATA PROPERLY?
How did you copy files to the external drive, and what files did you copy? Did you drag and drop in the Finder? Use a clone utility? What files did not successfully copy?
If you reformatted the drive as part of your install, then you won't be able to recover any files from the drive. Reverting back to (reinstalling) 10.4 will not help you.
Do you have a complete-drive backup of your old system?
Matt -
Try to copy data from broken drive
I have external drive which had time machine backup, but the surface is broken (will never get another WD drive), what would be the best way to try and copy as much data as i can? if i use Finder it's just gets stuck, but i want to leave it overnight, so it can try to recover as much as it can?
I already went through migration assistant, what happen is that i had two accounts one for home use as my main user, and one for development. everything was backed up using time machine and i never had problems writting data. so then at some point i decided to reformat my machine and was hoping time machine will restore everyhitng, but after hours, it said IO Error, Skip or Continue, i clicked skip and ended up with only my main account (also email was there), but non of the applications were restored and no my other account. so i can of have no clue how much was restored.
i got drive genius and checked the disc it was having more then 600 bad blocks in 30% scanned which was going on for 24 hours.
So, now i got replacement disc, and want to try using my best to copy all i can, so if i remember i am missing something, i can try to recover it later. -
Hi all,
I'm trying to figure out why my macbook keeps freezing when I try to drag my data across to it (even small files from a USB).
I've had to force restart over a dozen times today :/
I ran EtreCheck and there are a couple of issues (I've no idea what they mean).
If anybody could share some light into the report below I would be very grateful:
Problem description:
Macbook Pro mid 2010, Yosemite, blank new install on 1 TB hdd, keeps freezing when copying data from an ext drive and also from a usb
EtreCheck version: 2.2 (132)
Report generated 5/2/15, 4:55 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2010) (Technical Specifications)
MacBook Pro - model: MacBookPro7,1
1 2.4 GHz Intel Core 2 Duo CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 2061 - SN = W013358KQD3BA
Video Information: ℹ️
NVIDIA GeForce 320M - VRAM: 256 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.3 (14D136) - Time since boot: 0:7:25
Disk Information: ℹ️
ST1000LM024 HN-M101MBB disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 999.35 GB (968.00 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS23N
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Gatekeeper: ℹ️
Mac App Store and identified developers
Problem System Launch Daemons: ℹ️
[failed] com.apple.mtrecorder.plist
Launch Daemons: ℹ️
[failed] com.apple.spirecorder.plist
User Launch Agents: ℹ️
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
[loaded] com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
iTunesHelper UNKNOWN Hidden (missing value)
Caffeine Application (/Applications/Caffeine.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 600 - SDK 10.10
QuickTime Plugin: Version: 7.7.3
3rd Party Preference Panes: ℹ️
None
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
20% WindowServer
6% com.apple.WebKit.WebContent(7)
4% Safari
3% hidd
1% launchd
Top Processes by Memory: ℹ️
1.07 GB com.apple.WebKit.WebContent(7)
439 MB kernel_task
90 MB spindump
57 MB mdworker(5)
57 MB Safari
Virtual Memory Information: ℹ️
4.54 GB Free RAM
3.46 GB Used RAM
0 B Swap Used
Diagnostics Information: ℹ️
May 2, 2015, 04:47:31 PM Self test - passed
May 2, 2015, 01:39:52 PM /Library/Logs/DiagnosticReports/DesktopServicesHelper_2015-05-02-133952_[redact ed].cpu_resource.diag [Click for details]
May 2, 2015, 01:23:20 PM /Library/Logs/DiagnosticReports/com.apple.AmbientDisplayAgent_2015-05-02-132320 _[redacted].crash
Regards
HozThanks - I had a 1TB hdd in my macbook for about 12 months but it started playing up a few days ago (I got the question mark folder on bootup) so I bought another 1TB hdd (same model) and started from scratch.
My macbook is an early 2010... now I'm wondering if Yosemite is a bit too much for it?
The ext hdd is my timemachine backup, so yes I have used it often and it has my TM backups - and the usb is a new usb which Ive used a few times.
The issue seems to be when Im transferring files from an ext drive to my mac. I can use it fine and browse (worked find for 45 mins) then I tried to bring my data across.. and it copied a few gig over before total freeze.
This has happened about a dozen times.
I keep running disk utility and checking the disk. I also just ran the apple diagnostics tool that came in the apps cd - the hardware apears to be fine.
I have a 250 gb partition for the OS and the rest is my second partition for data.
I'm now wondering if I should reformat the first partition, install leopard from the CD, then upgrade to mavericks and leave it at that.
Any thoughts would be awesome. Thank you for reading and replying!
Hoz -
How to copy data from mac to external HD Drive
How do i copy data from mac book to an external hard disk drive?
Click on the Desktop area (the area where there are no open windows or Dock)
Look at the menu at the top next to the small Apple, it should say Finder
Click on the File men and select New Finder Window
Click on the File men and select New Finder Window (or stick in a disk, a USB, connect a hard drive and double click on the icon that appears on the Desktop)
Grab the Window by the top area by clicking and holding the mouse button down so both are side by side.
Click on the sidebar or open folders on the first window to get to where your files are
Click on the sidebar or open folders on the second window to get to where your destination is going to be
Click and drag the files or folder from one window to the other
If this occurs between volumes, it will copy
If this occurs on the same volume, it will move them
If you want to copy on the same volume, use the Finder > File > Duplicate and move the copy -
How to copy data from mac to external hard
how to copy data from mac to external hard
ok - since you'll be sharing it with a PC - connect it to your windows pc - then format from there - instead of NTFS format - choose exFAT.
or, you can read the link below on how to do it in dos mode.
http://answers.microsoft.com/en-us/windows/forum/windows_7-files/how-can-i-forma t-external-drive-in-exfat-not-in/0f6bf19a-19d6-4470-ae05-53ddf26bb476?msgId=1860 eae3-3488-4eea-8326-f87b89d9851b
once you've formatted it - you can now use it in both your macbook and windows computer. -
Will upgrading to windows 10 delete the data from all drives
A notification for upgrade to windows 10 is available for my mentioned notebook. I've never upgraded to a newer version of windows earlier so i wanna be sure if the upgradation would delete all the data from each drive(i.e. windows drive"c" along with D,E and F)) and what is the total amount of NET-DATA(in MB) will be used for Upgrading online..so that i might not run out of data balance during upgradation process. One more thing..currently the windows 10 logo has arrived at the bottom right of my task bar. Do REPLY asap!!!
Always back up your data when upgrading! It will only if you tell it to during setup. I would not upgrade untill you have backed up important data manually (copy>paste) to another external hard drive.
-
ADF 11g can not select and copy data from cell of readonly table in IE
hi,
In ADF 11g, when render view object as readonly table with Single RowsSelection, using IE browser can not select and copy data from the cell, but it work in firefox.
is it a bug?
Edited by: kent2066 on 2009-5-18 上午8:46Hi Timo,
Sorry forgot to mention versions.
We are using 11.1.1.7 and IE 9.
I tried in Google but could not get the solution.
Kindly let me know solution for this.
PavanKumar -
Copy data from one Table to another Table
How can I copy data from one Oracle Table to another Oracle Table on a different server? Question 2: How can I clear all of the data in one Table with a single SQL script?
Thanks...Question 1:
I assume you have the privileges. If you don't, ask the DBA to give them to you. Then
1. Login to database_source (It could be either the source or the target. Let's assume it's the source.)
2. Create a database link to database_target: CREATE DATABASE LINK link_to_database_target CONNECT TO myuserid IDENTIFIED BY mypassword USING 'database_target'; Note the single quotes.
3. Copy the table data: INSERT INTO targetowner.mytable@link_to_database_target SELECT * FROM sourceowner.mytable; COMMIT;
Question 2:
You have two options, but you may not have privileges for both.
Option 1:
DELETE FROM tableowner.tablename; COMMIT;
Advantage: Since this is a DML (Data Manipulation Language) statement, you have to commit the transaction. Also, the data will be gone but the table size is NOT changed, so it's ready for accepting replacement data. DML statements can simply be executed not only from SQL scripts, but from PL/SQL scripts as well.
Disadvantage: Slow, because all record deletion is logged, so you can recover from it by issuing a ROLLBACK; instead of the COMMIT; above. The table size is NOT changed, so if you are short of disk space or tablespace space, you have not resolved the issue.
Option 2:
TRUNCATE TABLE tableowner.tablename;
Advantage: Since this is a DDL (Data Definition Language) command, you do NOT have to commit the transaction. (DDL commands automatically commit both before and after their execution.) The table size will be changed back to the initial extent size which is the minimum size a table can have and can only be set when the table is created. If it needs to be changed, the table has to be dropped and recreated with a different initial extent size. The statement execution of this command is not logged, therefore it's much faster then the DELETE.
Disadvantage: No rollback. Being a DDL, this command cannot be executed straight from PL/SQL. If you need to issue this within PL/SQL, you will have to use dynamic SQL. -
Copying data from one table to another table thru java
Hi
I have to copy data from table emp in Database A to table emp in Database B. My input would be table name and number of rows to be fetched. these rows i need to insert in table B.
The problem over here is I won't be having any info. of table emp i.e the number of columns it has and their type.
So is their any way i can copy the data from one table to other without having the info abt the number of cols and their type.
TIACross post - http://forum.java.sun.com/thread.jspa?threadID=5169293&messageID=9649839#9649839
-
Copy data from one table to another
Hello everyone,
I have a student table with fields sno, sname. I created another table student1 with same fields sno, sname and with one new field class.
Now i want to copy data from sno, sname of student table to sno, sname of student1 table when the class field in styudent1 has no data i.e., its null.
Could any one let me know how to do this?
Thanks,
Prathimai want to copy data from sno, sname of student table to sno, sname
of student1 table when the class field in styudent1 has no dataSo what is the join condition? What column in STUDENT1 tells us what row in STUDENT to copy?
Cheers, APC
Blog : http://radiofreetooting.blogspot.com/ -
I need to copy data from a table in one database (db1) to another table in
Hi
I need to copy data from a table in one database (db1) to another table in another database (db2).
I am not sure if the table exists in db2,,,if it doesnot it needs to be created as well data also needs to be inserted...
How am I supposed to this using sql statements..?
I shall be happy if it is explained SQL also...
Thanking in advanceHow many rows does the table contains? There are manyway you can achieve this.
1. export and import.
2. create a dblink between two databases and use create table as select, if structure doesnot exists in other database, if structure exists, use, insert into table select command.
example:
create a dblink in db2 database for db1 database.
create table table1 as select * from table1@db1 -- when there is no structure present
-- you need to add constraints manually, if any exists.
insert into table1 select * from table1@db1 -- when there is structure present.
If the table contains large volume of data, I would suggest you to use export and import.
Jaffar -
Copying data from excel(more than one row) and pasting into table control
I have a requirement to copy data from excel and have it pasted it into the corresponding fields table control when the user clicks on an icon.For the first part I used a class to copy it from the clip board.By the previous process,I get the data inside an internal table, but even after trying to split the data using 'split at cl_abap_char_utilities=>horizontal_tab into table itab.' it's not working.The table and the excel file are of the same structure.
Does anyone know any cause as to why it might not work?Is there any other way to achieve my objective?
BonHi,
try to get data into internal table as below
TYPES : BEGIN OF ty_data ,
zbukr TYPE payr-zbukr ,
hbkid TYPE payr-hbkid ,
hktid TYPE payr-hktid ,
rzawe TYPE payr-rzawe ,
chect TYPE payr-chect ,
laufd TYPE reguh-laufd ,
laufi TYPE reguh-laufi ,
lifnr TYPE reguh-lifnr ,
vblnr TYPE reguh-vblnr ,
rwbtr TYPE reguh-rwbtr , "uncommented
unique_no TYPE char13 , " Added SAP Doc. No. and current year concate in NEFT,RTGS and Fund Transfer cases
END OF ty_data .
DATA : wa_file LIKE LINE OF it_file ,
wa_data TYPE ty_data .
DATA: it_data1 TYPE kcde_intern WITH HEADER LINE,
wa_data1 LIKE LINE OF it_data1.
start-of-selection.
CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
EXPORTING
filename = lv_file1
i_begin_col = '1'
i_begin_row = '4'
i_end_col = '11'
i_end_row = '60000'
TABLES
intern = it_data1
EXCEPTIONS
inconsistent_parameters = 1
upload_ole = 2
OTHERS = 3.
IF sy-subrc = 0.
PERFORM format_data.
ENDIF.
FORM format_data.
DATA : ld_index TYPE i.
FIELD-SYMBOLS : <fs>.
DATA it_tab LIKE wa_data OCCURS 0 WITH HEADER LINE.
LOOP AT it_data1.
MOVE it_data1-col TO ld_index.
ASSIGN COMPONENT ld_index OF STRUCTURE
it_tab TO <fs>.
MOVE : it_data1-value TO <fs>.
MOVE it_data1-value TO p_table.
AT END OF row.
APPEND it_tab.
CLEAR it_tab.
ENDAT.
ENDLOOP.
it_data[] = it_tab[] .
ENDIF.
endform. "format_data -
Error while copying data from infoprovider to planning area
Hi,
Error for COM routine using application program (return code 40,075)
Message no. /SAPAPO/OM102
Diagnosis
An application program has called a COM routine. During the process, an error occurred.
I got the above error while copying data from infoprovider to planning area using t code TSCUBE.
How to resolve this?Hi,
Is your issue resolved, If not please run MPOS consistency checks, Planning area consistency check and livecache consistency check.
Below are the programs for the same.
/SAPAPO/TS_lcm_cons_check
/SAPAPO/TS_PSTRU_TOOL
/SAPAPO/TS_PSTRU_CONS_CHECK
Regards
Kishore -
Copy data from a UDO form to Goods Receipt PO using UI API
Hi, all
I tried to copy data from a UDO form to Goods Receipt PO using UI API through following codes.
It works fine while copying to a Item-type Goods Receipt PO.
But when the doctype is set to service, I got errors.
I use for-loop to copy two items, Description and LineTotal, into the matrix of Goods Receipt PO form, but both failed.
any suggestion?
Edited by: Chao-Yi Wu on Aug 25, 2009 5:50 AMHi Chao-Yi Wu ,
SBO_Application.ActivateMenuItem("2306")
Dim oFormGR As SAPbouiCOM.Form = SBO_Application.Forms.ActiveForm
Dim omtxIQC, omtxGR As SAPbouiCOM.Matrix
Dim oedIQC, oedGR, oed As SAPbouiCOM.EditText
Dim ocbIQC, ocbGR As SAPbouiCOM.ComboBox
oFormGR.Mode = SAPbouiCOM.BoFormMode.fm_ADD_MODE
oedIQC = oFormIQC.Items.Item("13").Specific
oedGR = oFormGR.Items.Item("4").Specific
oedGR.Value = oedIQC.Value
oedIQC = oFormIQC.Items.Item("21").Specific
oedGR = oFormGR.Items.Item("24").Specific
oedGR.Value = oedIQC.Value
oedIQC = oFormIQC.Items.Item("edComments").Specific
oedGR = oFormGR.Items.Item("16").Specific
oed = oFormIQC.Items.Item("3").Specific
oedGR.Value = oedIQC.Value + ", Goods Recript PO:" + oed.Value
ocbIQC = oFormIQC.Items.Item("cbDocType").Specific
ocbGR = oFormGR.Items.Item("3").Specific
If ocbIQC.Selected.Value = "I" Then
ocbGR.Select(0, SAPbouiCOM.BoSearchKey.psk_Index)
Else
ocbGR.Select(1, SAPbouiCOM.BoSearchKey.psk_Index)
End If
omtxIQC = oFormIQC.Items.Item("mtx_0").Specific
For i As Integer = 1 To omtxIQC.RowCount
omtxGR = oFormGR.Items.Item("38").Specific
If ocbIQC.Selected.Value = "I" Then
oedIQC = omtxIQC.Columns.Item("c_ItemCode").Cells.Item(i).Specific
oedGR = omtxGR.Columns.Item("1").Cells.Item(i).Specific
oedGR.String = oedIQC.String
oedIQC = omtxIQC.Columns.Item("c_AQty").Cells.Item(i).Specific
oedGR = omtxGR.Columns.Item("11").Cells.Item(i).Specific
oedGR.String = oedIQC.String
oedIQC = omtxIQC.Columns.Item("col_19").Cells.Item(i).Specific
oedGR = omtxGR.Columns.Item("14").Cells.Item(i).Specific
oedGR.String = oedIQC.String
Else
omtxGR = oFormGR.Items.Item("39").Specific
oedIQC = omtxIQC.Columns.Item("c_Descrp").Cells.Item(i).Specific
oedGR = omtxGR.Columns.Item("1").Cells.Item(i).Specific
oedGR.String = oedIQC.String
oedIQC = omtxIQC.Columns.Item("col_16").Cells.Item(i).Specific
oedGR = omtxGR.Columns.Item("12").Cells.Item(i).Specific
oedGR.String = oedIQC.String
End If
Next
for items the matrix is 38 and for service the matrix is 39
Rgds
Micheal
Maybe you are looking for
-
Audigy 2 on Neo2 Platinum causes LOCK UPs/BSODs!!! Help!
I have a videocard with a HUGE, I mean HUGE custom CPU heatsink attached to it. This leaves me only ONE slot available for my Audigy 2. And that slot is the last slot 5, orange color. Its the ONLY ONE AVAILABLE. I read on these forums about some
-
Can't open PDF enabled for Measuring Tool
Help please!! I need the measuring tool via Reader X. So per this forum, I had the creator of the PDF do the following in Acrobat... File>Save As>Reader Extended PDF>Enable Commenting and Measuring Then I tried opening the PDF, but I get this error..
-
Hi, I have 2 issues with a custom rft template for Printing POs from EBS 11.5.10.2 using XML Desktop ver 5.6 Build 45. 1 I have 2 tables on the template corresponding to 2 different groups.. I will display only one table of data dynamically based on
-
Colour differences when copying
I work on a Mac and I just updated from Illustrator CS5 to Illustrator CS6 and I'm noticing a weird problem. I have a file that I created in CS5 that when I copy the artwork to a new file in CS6, the colours are totally different. I have checked my p
-
Vectors : Converting to double[ ] array
Hello, I have a vector which I know consists of double values only. I am trying to create an array of double from this vector but am having some difficulty. Firstly if I try this : double[] high = (double[])datavector.high.toArray(new double[0]);JBui