Copying dvd from different region

I wanted to play a dvd on my macbook but it is a different region zone (2). I copied the movie to my hardrive using mactheripper.
I still could not get the movie to start by choosing the video_ts file using the mac dvd player. Then I downloaded the program matinee and it tells me that there was an error when attempting to start the movie.
Has anyone else out there experienced similar problems when trying to do this?
Thanks in advance for any help

dobes918...
If you use VLC on a MacBook, VLC can only read DVDs from regions for which the DVD drive has been set. Older PowerBook models can use VLC to read DVDs from any region regardless of the DVD drive settings, but not the newer Intel Macs.
Also, gligeen is looking for a region-free recorder, not just a region-free player. It's possible to get a high-quality DVD recorder whose firmware can be flashed to make it region-free. According to the folks over at the MTR forums (http://www.ripdifferent.com/phpbb2/index.php), the Pioneer 111-D (street price around $40) and a firewire enclosure (another $4)0 to hold the drive is the way to go.
Pioneer drives tend to be of very good quality.

Similar Messages

How to update data in database from different region of the same page

Hi,
I have pepared two regions of tabular form based on the same table,each region is selecting different columns of the same table.
I want to update the values from different regions in the database using single submit button.
Regards
Shashi

I presume that the two regions are working fine with their individual buttons and your issue is how to make them both save with one button.
Here is how
a. You will have 2 ApplyMRU and 1 ApplyMRD processes for each of the regions. Right? Lets say you have 2 "Save" (i.e. label=Save) buttons, one has name SUBMIT and the other SAVE ( SUBMIT and SAVE being the requests that will be sent when they are clicked , respectively)
b. Make the Display condition on one of the buttons 'Never'. Now it won't show when you run the page. Lets say you made SAVE's conditional Display 'Never'
c. Go and change the condition on all ApplyMRU and ApplyMRD processes from "When Button Pressed" to "Request is contains in Expression1". In Expression1 enter SUBMIT,SAVERegards

How to insert values from different region into one table

Hi everyone
I have created a page which contains 4 html regions like region1,region 2 ...region 4
in region 1 i created 2 text items like (emp_name,emp_id).
in region 2 i created 2 date fields (start_date,end_date).
In region3 i created a tabular form which contains(job , hire_date).
in region 4 i created a textfield (%of Hike)
So i want to create a button(submit) .when i press the button it will insert all the informations provided by the user in different regions will be inserted to a table called employee_information.
Can i do this?
If it is possible please tell me how to do this
if not then tell me any alternative solution.
Thanks,
Regards,
Sabyasachi

Sabyasachi wrote:
Hi fac586
Can you please tell me step by step how to do it or can you please make an example in apex.oracle.com and give me the credentials so that i can know clarify my doubts.1. Create a Form using a Wizard. This will create the items and processes necessary to retrieve data from, and perform DML on, the table. The items will be contained in a single default region.
2. Create custom HTML regions on page.
3. Move items and buttons from the default region created by the Form Wizard by changing the Region value in the "Displayed" section of the item attributes page, or Page Items page; or reassign items to regions using the Reassign Region Items page.

How to copy page from different workspace?

hi guys,
can anybody tell me how to copy page frm different workspace..??
thxs
regards,
Kumar

Firstly sorry if my handle appears as User10390457, I've changed it but it takes a little time to update.
Kumar,
You should import the entire application from where you want to copy the page into the workspace where you want to copy the page to. You will have to change the workspace id (called 'p_security_group_id') to the workspace id that you're importing into, in the export file. You will also have to assign a different application id when you're doing the import. Thereafter you can copy the page using the normal copy function in Apex.
I hope this is clear enough.
Good luck.
Vis Naidu

Who do I have to adress to in order to suggest to whom corresponds make available to customers media material from different regions such as movies? I use movies for language learning purposes and Region/Area restrictions don't help me. HELP!!

I Need one method to get access to media from a different region.

I Need one method to get access to media from a different region.

Data copy to from different scenario, version to one scenario version

Hi,
I have this scenario to do.
Copy data from 3 scenario version to one scenario version.
Scenario1 -> final to TargetScenario -> working
Scenario2 -> final to TargetScenario -> working
Scenario3 -> final to TargetScenario -> working
Means 3 scenario data into one
Sum of all three
I am using Datacopy command to target but this is wiping out previous scenario data
Any thoughts which command to use or else???

You cannot use DATACOPY here.
Create a calculation script which does fix on working
Target scenario= scenario1->final+scenario2->final+scenario3->final;
Regards
Celvin
http://www.orayplabs.com
Please mark responses as helpful/correct if applicable

DVDs with different regions.

I recently bought a DVD box set only to discover that it's set for a region different from the UK. I don't want to use up all of my region allowances on my Mac, and in the past I've used AnyDVD and it worked brilliantly, on my PC. Anyone know how well it might work with Mac?

Yeah, you'll have to pick a region, and for some archaic reason (I'm sure linked to the DRMA), you have a limited number of times you can "change" your region. If I recall correct, it's 5 times. Not perfectly clear what happens after that, or if you can do anything about it, but a Google search can answer those questions.

How to dynamically copy cells from different tables?

Hi,
I've created an invoice and have 2 different tables. First is at top with Recipient information, the invoice number, their address, etc. Below that, I have a 2nd table laying out the items they are being charged for.
I would like to copy the invoice number from the 1st table, to a cell in the 2nd table or a 3rd table I will create later on. I know how to copy cells in 1 table, ie. =D4. But not sure how to target a different table altogether.
Also, is it possible to copy a cell from 1 table to a text box field?
Thanks!!

Yvan's point is true. Please use the User Guides first; they're actually pretty readable.
However, there's a very quick & easy way to try it out as well. Go to the cell where you want your data to end up. Type "=" (without quotes) to indicate you're going to input a formula of some kind. Then without clicking inside any tables, use the list of sheets and tables to the left to get to your source table and click on the cell that contains the data you want to copy. Presto! Go back to your destination cell, and the formula is now filled in, following the scheme Yvan provided.
Vince

I am not able to buy a book from different region than my iTunes region.

I want to buy Mandela's way book, I have found it in US region, and did not find it in Egypt region, when I have switched my region to US my credit card was invalid. and I have failed to buy it. Any help

You can't download content(except for podcast episodes) from another country's iTunes Store. Check if it's available in a non-Apple store.
(94205)

Copying column from different table

I want to copy the column of one table1 to table2 column with the condition to add the existing data not to replace
Regards

Sure ->
satyaki>>
satyaki>> CREATE TABLE emp_source
2 AS
3     SELECT * FROM emp;
Table created.
satyaki>>
satyaki>> SELECT COUNT(*) FROM emp_source;
COUNT(*)
        14
satyaki>>
satyaki>> CREATE TABLE emp_target
2 AS
3     SELECT * FROM emp WHERE ROWNUM <= 8;
Table created.
satyaki>>
satyaki>> SELECT COUNT(*) FROM emp_target;
COUNT(*)
         8
satyaki>>
satyaki>> BEGIN
2     MERGE INTO emp_target et
3        USING ( SELECT * FROM emp_source ) es
4        ON    ( et.empno = es.empno )
5     WHEN MATCHED THEN
6     UPDATE
7        SET et.ename = es.ename
8        ,   et.sal    = es.sal
9        ,   et.mgr    = es.mgr
10        ,   et.deptno = es.deptno
11     WHEN NOT MATCHED THEN
12     INSERT
13        ( et.empno, et.ename, et.sal, et.mgr, et.deptno )
14        VALUES
15        ( es.empno, es.ename, es.sal, es.mgr, es.deptno );
16
17     DBMS_OUTPUT.PUT_LINE(TO_CHAR(SQL%ROWCOUNT) || ' rows merged.');
18 END;
19 /
14 rows merged.
PL/SQL procedure successfully completed.Hope this will help.
Regards.
Satyaki De.

Copy Images from different workspace

Hi,
I have an application that uses 4 images. These images are in shared components -> images of that application. This application is in the workspace, say 'X'
When I go to these Images I see - #APP_IMAGES# xyz.gif
The only options I find there are - Display install file script and Display deinstall file script.
Now I want to use these images in my application. I am developing this application in a different workspace, say 'Y'.
How do I get these Images into my workspace? And put it in the shared components of my application.
Please Suggest.
Thanks.

Hi ,
Try this
Open Home>Application Builder>Application X>Export / Import>Export->see the tabs Workspace Users Application CSS Images Files Themes User Interface Defaults now click the image then proceed->
choose from Export Images in Application selectlist X->File Format=dos->Click EXPORT IMAGEs button.
X.sql file will get download
go to your workspace and choose Y application
Select the file you wish to import to the export repository. Once imported, you can install your file.
Open Home>Application Builder>Application Y>Export / Import>Import-> browse the sql file and
File Type=image import
click Next button-> image will import in your Y applicaiton
Conform by checking this under shared components-> images
Thanks
Mark Wyatt

Best ripper to use for copying dvds from store to hard drive

I have just bought mac pro, have Lion OS. First time with Mac. Want to copy movie DVDs to hard drive. What is best to use?

http://www.wikihow.com/Make-a-DMG-File-on-a-Mac

Copying DVD from Previous FCE Project

I am trying to easily copy a project I created in FCE. Originally I burned it to DVD using iDVD but saved nothing of the project, thinking I would never need it again. Now people want copies. I went to the iDVD discussion forum and the following document was suggested, "How to copy previously-burned DVD-R video discs,"
http://support.apple.com/kb/HT2059?viewlocale=en_US
The article, even though it was very detailed and had illustrations, wasn't the way it went for me. Some of the instructions were confusing and didn't match what I saw on my monitor, but I just kept going, trying this and that, hoping it would work out, which it did. Now I want to burn more. I know disk utility will do the trick but need instructions that are more accurate.
Any suggestions would be appreciated.
Lee

I did try copying the disk again. This time it didn't work. It looked like it was burning OK and the disk even has the same deep blue burn band as the original, but when I tried playing it in two DVD players it said "Disk Error." I'm wondering if I should get Toast or some other reliable copying program. The problem I am having using Disk Utility is that the instructions in the threads suggested don't match what I am seeing. I hate to keep wasting printable disks.
Lee

How to flash the Windows Phone 8.1 from different region

I have Windows phone with update from Bangaladesh and i need to push the Usa Update to it. How can i do this ?Thanks
Dileepa S. Rajapaksa
Trainee Developer
Microsoft, Sri Lanka
Twitter : @dsrajapaksa
Blog : http://www.dileepatech.net

For help using Windows Phone please post in the Windows Phone forums on
http://answers.microsoft.com

Exporting different regions codes from imovie

Does imovie allow you to export video and burn to DVD with different region codes. I live in Canada and would like to make a copy of my movie for someone living in Europe.

Being from Germany and thus often confronted with the PAL/NTSC issue:
Over the last at least 10 years the majority of locally sold DVD-Players and TV-Systems are multisystem. So the risk of someone not being able to play back an NTSC-DVD is there, but chances are a lot higher that it works.
To my knowledge, the majority of DVD-Players sold here even allow for playback of an NTSC-DVD to a PAL-only TV-set.
I personally think it is fairly safe at this time, only to worry about the system issue (not saying it is not there at all) once you get feedback, that someone is in fact not able to playback NTSC-material.
Dirk

Copying dvd from different region

Similar Messages

Maybe you are looking for