Copying files from removed HP hard drive

Hi I was wondering if this would work to transfer my files from my HP Dv9408nr laptop, (2.5 Sata USB 2.0 IDE Aluminum Enclosure)? Are HP hard drives IDE? This is the link where I found it:
http://www.bargaincell.com/25-sata-usb-20-ide-aluminum-enclosure-black-p-515345.html?pstore=NL032712...
Any help would be appreciated thanks.

Hi
You have a couple of options as I see it.
I believe that you are try to take a back of you Old Hard drive this will help you to complete it. You have all connector in it like IDE , SATA for Hard drives & Optical drives.
http://www.cooldrives.com/seatatousb20.html
Please note the link you have is just a casing not the drive for Back up.
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
*Did my response help with your issue? If so, please give me Kudos by clicking the "Kudos" button. Thanks!
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Similar Messages

  • Why Can't I Copy Files from an External Hard Drive or SD Card?

    Major problem here... Why when I try copying files from an external hard drive or an SD card onto my internal iMac hard drive, it doesn't work?  The status bar that pops up, shows that it completes the transfer of the files to 100%; however, when it does in fact finish, the files actually do not appear on my hard drive.
    Any help would be greatly appreciated.  This is one of many problems I have been finding with OS X Lion and am very much on the verge of going back to Snow Leopard.
    Thank you.

    Have u tried the usual? Safe boot. Delete finder plist files? etc. And the drives are formatted for mac yes?

  • HT2518 i would like to copy files from an external hard drive to my Mac. I intend to do this several times. Does Mac identify this files which have already be copied over or does it re- copy them every time?

    i would like to copy files from an external hard drive to my Mac. I intend to do this several times. Will Mac copy the same files every time or can it segregate and only copy new files from the external hard drive?

    Only copies the file or files you select. The selection will remain unless you change it in case you wish to repeat the same copy to another location. Multiple and different copy operations can be run simultaneously.

  • How do I copy files from a seperate hard drive to Bridge

    How do I copy files from a seperate hard drive and paste them to Bridge

    Bridge is just a file Browser, nothing more and nothing less.  It doesn't create folders of its own and it doesn't keep image files in the application itself.
    You don't "paste" anything "into" Bridge.  You just navigate Bridge to the other drive where the images are, point it toward said files, and Bridge will show them to you.
    Once you find your files, you can use Bridge to move them or copy them to wherever you want.  They will never be "inside" Bridge.  As soon as you disconnect the other hard drive, Bridge will have no record of them unless you copy them over to a drive that is always attached to your computer, such as your boot drive or another internal drive.
    Recapping;  Your images are never in Bridge.

  • I get error 8062 when trying to copy files from one external hard drive to another. It starts out copying files, but after 10 minutes or so it stops and I get the error 8062. The hard drive tech support says the problem is in my Macbook Air.

    I cannot copy my doc and photos and videos from one external hard drive to a second external hard drive -- both plugged in to my MacBook Air -- I get Error 8062 and the copying (which seemed to be going on for 10 minutes) stops and nothing gets copied.
    As any Macbook Air owner knows, there is SO LITTLE storage capacity on the computer that you have to back up big files onto an external hard drive to avoid getting the other annoying error that says you have no more memory/storage capacity/whatever the proper term is, and you cannot use the computer.
    Backstory: Before this error cropped up, I had backed up lots of files to an external drive and then removed them from my computer. But then the external hard drive got corrupted and I could not access my entire photo library. Had to pay $850 to Kroll Ontrack to recover those files. I have now bought 2 new external 1 Terrabyte  hard drives as protection against another such disaster. BUT I cannot copy the files from the first hard drive where all my reovered files now sit, to another backup hard drive.
    Feeling vulnerable. Please help.
    SusaninNY

    From the menu bar, select
     ▹ System Preferences ▹ Energy Saver ▹ Power Adapter
    and uncheck the box labeled Put the hard disk(s) to sleep when possible, if it's checked.
    If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
    Check that the data cable is securely inserted at both ends.
    Try a different cable.
    If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
    If you're connecting it directly, try a different port.
    Disconnect all other devices on the bus, or as many as possible.
    Test the drive with another Mac. Test another drive with this Mac.
    If the drive is bus-powered, but has an AC adapter, connect the adapter.
    Start up in Safe Mode and test.
    If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed. You may be able to salvage the mechanism by removing it from the enclosure and installing it in another one, or in a drive dock.

  • Copying files from a dead hard drive

    How do I repopulate files (Touchsmart 600) from my old hard drive?  I have the files on an external drive and have a desktop copy on the newly formatted machine.  Tried recovery and restore options with no luck.  any help is appreciated.

    i'm going to assume you have a TS600 whom's hdd failed, but you managed to make a raw copy of all the data on it before you replaced the hdd with a new one.  then you recovered the TS600  with your recovery discs.  so now you have your TS600 up and running, but want to 'restore' your previous setting such as your wallpaper, files in their old locations, email, internet favourites and etc.
    if that is the case then there is no known way to achive what you want automatically - it needs to be done manually (which is kind of better in a lot of ways, you get the control).
    you can migrate settings and files from one pc to another quite easily, but not from a copy of the files you have made on a external hdd.
    hope this helps....most of your files should be found under c:\windows\users
    regards davida
    "Although I am an HP employee, I am speaking for myself and not for HP"

  • How can I copy files from an external hard drive without creating copies on the disk?

    I recently purchased a MacBook Air as part of a requirement for schoolwork. I decided to use it to sync music to my iPod and iPhone, and it worked perfectly well, however, i keep most of my music files on an external hard drive. Recently, it started sending me messages about the hard drive being almost full. I checked on the about this Mac screen, and it said that up to 95 gigabytes on the disk drive had been taken up by music. This was not my intention, as i had previously assumed the music was kept on my external hard drive as it had been on windows. I attempted to delete the folder, but it now said that my disk drive was taken up by "other" files. I want to still use my iTunes without these files copying. How?

    Hi flyingroastchicken,
    If the songs are being stored on your Mac, then make sure that the location of where the iTunes media is being store. Take a look at the article below to verify that you have it set up the way you want. 
    iTunes for Mac: Moving your iTunes Media folder
    http://support.apple.com/en-us/HT201562
    Take it easy,
    -Norm G. 

  • Why can't I copy files from my external hard drive - error code -50.

    I sm trying to back up an external hard drive to a network drive. Some files copy but not all;.  SOmetimes a folder seems to have copied but then I see that most of the files inside have not.  And sometimes I just get 'An unexpected error has occurred'.  Error code - 50.
    I need to have a back up copy of the files on this hard drive.  How can I stop this happening and copy files properly and securely?
    The external hard drive is a LaCie bought from Apple, share formatted FAT32.
    The network drive is a WD MyBookLIve Duo which WD tell me should work equally well with any operating system.
    Please advise.  I need to archive a security copy of this data urgently
    John Wood

    Have u tried the usual? Safe boot. Delete finder plist files? etc. And the drives are formatted for mac yes?

  • Problems copying files from an external hard drive to MacBook (error code 36)

    A little while ago I backed up some files on my iMac to an external hard drive (formatted in the Mac format). These were primarily office documents (PDF files, Microsoft Office) and some photos. The documents had orignally been copied to my iMac from a PC (via USB), whilst the photos were imported directly to the iMac. Having brought a MacBook Pro recently, I've been attempting to copy the data over. Unfortunately, I keep getting error code 36 when it attempts to copy the files over. I've tried skipping some of the files it gets stuck on, but it keeps finding more. This also happens when I am just trying to copy over a folder of photos. Another unusual thing that I noticed is that when I try to copy a folder containing just under 300 files, when it attempts to copy it says it is trying to write 1,500+ files... which I don't quite understand.
    I've run the disk utility tool to check the hard drive, but it says it's fine. Prior to copying the data over to the external hard drive in the first place, it had been freshly formatted. Unfortunately, since this was the backup disk, I kinda need to save these files!
    Does anyone know of any solutions out there that could help?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Click the Clear Display icon in the toolbar. Try the action again. Post any messages that appear in the Console window – the text, please, not a screenshot.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • How can I copy files from one external hard drive to another, without erasing anything?

    Hi,
    I have video and photo files on one hard drive. I'd like to keep that one intact but also copy all the files to a second external hard drive. When I try to do so, I can't figure out how to open both hard drives at once. (If I open one, it closes the other window.)
    Thanks for your help!
    CB

    Open a finder window and open up one harddrive. Then go to file>new finder window. This way you can have two finders up and select a different harddrive in each one. Then just copy and paste the files.
    Hope it helps!
    Ryan

  • How can i copy files from one external hard disk to another using macbook pro with retina display

    How can i copy files from one external hard drive to another using macbook pro with retina display?

    That's odd - if you open Disk Utility (Applications->Utilities) and select the disk(s), how are they formatted? If you're only going to be used with your Mac, they should be formatted as "Mac OS Extended (Journaled)".
    Clinton

  • How to transfer big files from imac to hard drive

    haveing diffulty of copying file from Imac to Hard drives. is there any free app which i can download and help me with my problem.

    To show HD on desktop
    go into FINDER at top then PREFERENCES  then GENERAL tab
    then check "hard disks" and "external disks"
    after that drag and drop files as you need to.  You dont need an application for same.

  • If you delete a large file from the mac hard drive does it also remove it from time machine on external hard drive

    if you delete a large file from the mac hard drive does it also delete it from time machine on the external hard drive ?

    As the others say, no, the backup copy won't be deleted immediately, but it will eventually.
    If you want to delete all backups of a selected item, such as for space or security reasons, see #12 in Time Machine - Frequently Asked Questions.

  • I can't copy iTunes media files from one external hard drive to another.

    Hi, I am running the latest iTunes and Mavericks software on my MacBook Pro. My iTunes library is stored on an external Seagate 2tb hard drive and it is almost full. I want to transfer the files to a WD Elements 3tb external hard drive and have made that new volume the destination folder for my iTunes library. However, even though I have enabled read/write on both volumes and made the iTunes media folders on both shared folders, I can't copy all the files from the Seagate drive to the WD drive. It comes up with an error message that says "The operation can't be completed because an unexpected error occurred (error code -8058)". I can transfer files from my MacBook hard drive to the new volume, but can't copy files from the old Seagate volume to my MacBook hard drive; it makes the "boing" sound that indicates it is copying but nothing transfers. Files that won't copy include all music files, some video files and all podcast files. Some transferred with no problem. Any ideas out there?

    Hi Limnos, thanks very much for your reply.
    both external drives came preformatted for Windows but I erased each and reformatted them for Mac before using them.
    i made the destination folder on the new WD drive the new iTunes folder using Advanced preferences in iTunes.
    my original iTunes folder on the first drive contained all my iTunes files, as that, also, was the destination folder that was linked via Advanced preferences.
    If I download new content now with the new drive attached, iTunes has no trouble finding where to place the files.
    in Preferences I have both boxes checked (copy files" and "organize") that deal with copying iTunes files.
    When  I first attempted to copy all iTunes files from one media folder to the other on the external drives, I just did a drag and drop of the whole iTunes media folder from one to the other while both were mounted on my desktop. It started copying immediately with no problems, but as it progressed it started skipping files, each time displaying the error message I reported earlier. that included my entire Music folder. When I open, for example, a season folder that contains files that would not copy, eg, Modern Family Season 5, the episodes that won't copy are there and visible but any attempt to drag and drop them into the correct folder on the new drive results in the error message. There is no pattern to it; it will choose some episodes from some seasons but not others, and no music at all.
    when I look at the "missing" files in  iTunes they have the small exclamation mark that indicates the file is missing, but when I locate it through iTunes it doesn't copy the file on the old external drive to the new one. It just plays it having found the file on the old drive.
    originally I had to make the iTunes folder on the old drive into a shared folder using the Get info window after either a software upgrade or an OS upgrade (I can't remember which, it was several years ago). For some reason the upgrade changed the preferences of that folder to a Read Only folder and after researching the problem found the only way to keep using the drive was to make the folder a shared one. I can't remember why and I apologise for that but it was a long time ago.; I can tell you that at the time it was necessary.
    thanks again for your time; I have a good working knowledge of iTunes and Macs in general so I truly believe I have done everything according to how it should be done,, but clearly I've done something wrong!

  • I have macbook pro 13" I want to know how to copy files from my mac to the external Toshiba Hard Drive. I can't even delete files from my external hard drive. please help me my macbook HD is almost full and I have to copy my images to the Toshiba HD

    I have macbook pro 13" I want to know how to copy files from my mac to the external Toshiba Hard Drive. I can't even delete files from my external hard drive. please help me my macbook HD is almost full and I have to copy my images to the Toshiba HD

    To delete files from your external HDD, attach it to your MBP and drag the unwanted files to trash and then empty trash.
    Then you select the files that you want to transfer by 'drag and drop' to the external HDD and trash the files on your MBP.
    Ciao.

Maybe you are looking for

  • Memory usage and memory warnings

    I have a problem with memory 1) Short app decsription: TabbarController \ - 1.1 TAB: NavigationController _\1.1.1 - TableViewController(Groups) __\1.1.2 - TableViewController(Users) \ - 2 TAB: NavigationController _\2.1 - TableViewController(Statisti

  • Looking for app similar to Nicecast (Internet audio streaming)

    I am a new Arch user migrating from Mac OS X. I am looking for an app similar to Nicecast from Rogue Amoeba. Nicecast takes an audio input (a mic, for example), provides some basic, real-time filters and outputs to an Icecast server. (Both Icecast an

  • Retrieving nested table columns through a REF CURSOR in php

    Hello. I have been able to execute REF CURSORS returned by pl/sql functions succesfully with php. I have also been able to bind collections to the input/output of pl/sql functions/procedures. However, what I am unable to do, is to execute a cursor re

  • DBase Driver problems

    I have been using Crystal for about 15 years, mostly producing reports from FoxPro tables.  Over the years, the drivers would periodically get broken and eventually fixed.  The application was stuck on 8.5 for years for a couple of reasons.  IT WORKE

  • Upgrading from LR 3.5 to 3.6 on a Mac

    I have downloaded 3.6 and run the instalation but for some reason LR is not "recognizing" it.  Do I need to enable LR to run a release candidate or some other proactive measure? Thanks for your time and answers.