Copying files to SD card using USB card reader

Everytime I try to copy mp3 files to an SD card using a USB card reader my notebook hangs after just a few MB have been transferred. what should i do?

I myself have seen this happen right in front of me with a customer. Sometimes you have to me a little more selective with your card readers because not all of them work right out of the box.
I have found the Zio corporation readers to work splended with Mac OS X you can find them at Compusa I haven't really seen them any other place. But IMHO the issue is with your reader and not your memory.
As for the part number on the reader from compusa it is as follows that is if you are willing to give it a try....
Thunderbolt SD / MMC / MS Reader / Writer
Manufacturer: Zio Corporation
Mfg Part #: CM28100
Product Number: 332371

Similar Messages

PC-Card GPIB Interface for a Desktop PC using USB card reader?

I have a IOTech's PCMCIA GPIB interface card. It works well on the notebook with LabVIEW. I want to use it on the Desktop PC using USB card reader or other connectors with LabVIEW.

Somebody wrote in about this issue. From his comments, it sounds like it may work.
See:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=506500000008000000E6100000&ECategory=Measurement+Studio.LabWindows-CVI
Randy Solomonson
Applications Engineer
National Instruments

HT1449 copying files failed. the disk could not be read from or written to.

Im moving my iTunes to an external hard drive. Its moved about half already and Im now getting this error. I have no idea what file its getting stuck on so I cant remove that file. When I restart it it will say preparing to copy then I get the error right away. I dont want to delete the extrenal and start over if I dont have to.

Ive already changed the location for my itunes media to my extrenal hard drive so when i click to consolidate files Im getting the error
copying files failed. the disk could not be read from or written to

Error while Accessing Smart Card using Open Card Frame Work

HI
Using Open Card Frame work I am trying to access GemAlto provided Smart Card (java card). I downloaded the Open Card Frame work from http://www.openscdp.org/ocf/download.html.
I am executing a basic program to access the data stored in smart card.
public static void main(String[] args)
                    System.out.println("reading smartcard file...");
                    try {
                    SmartCard.start();
                    CardRequest cr = (FileAccessCardService.class);
                    System.out.println("calling waitforCard");
                    SmartCard sc = SmartCard.waitForCard(cr); //Error comes after this line
                    System.out.println("After waitForCard called");
                    FileAccessCardService facs = (FileAccessCardService)
                    sc.getCardService(FileAccessCardService.class, true);
                    CardFile root = new CardFile(facs);
                    CardFile file = new CardFile(root, ":c009");
                    byte[] data = facs.read(file.getPath(), 0,
                    file.getLength() );
                    sc.close();
                    String entry = new String(data);
                    entry = entry.trim();
                    System.out.println(entry);
                    } catch (Exception e) {
                         e.printStackTrace(System.err);
                    System.exit(0);
The content of the opencard.properties are :
          OpenCard.services = opencard.opt.util.PassThruCardServiceFactory
OpenCard.terminals = com.ibm.opencard.terminal.pcsc10.Pcsc10CardTerminalFactory
OpenCard.trace = opencard:5 com.ibm:4 opencard.opt.database:6
After the line SmartCard sc = SmartCard.waitForCard(cr);
the program is expecting a card to be inserted but while inserting Smartcard the following error message come :
          calling waitforCard
          [ERROR    ] com.ibm.opencard.terminal.pcsc10.OCFPCSC1.OCFPCSC1.SCardConnect
--- message
--- thread Thread[Thread-0,5,main]
--- source com.ibm.opencard.terminal.pcsc10.OCFPCSC1@2e7263
[ERROR    ] com.ibm.opencard.terminal.pcsc10.OCFPCSC1.OCFPCSC1.SCardConnect
--- message Protocol = 0
--- thread Thread[Thread-0,5,main
--- source com.ibm.opencard.terminal.pcsc10.OCFPCSC1@2e7263
Basically the error is coming from the SCardConnect function of OCFPCSC1.cpp file.
Please reply to my mail id if any body has any idea how to resolve this issue.
MAIL-ID : [email protected]
With Regards
Swarup
Finacle Archie
Infosys Technologies Limited,Bhubaneswar,India

Sounds like an issue that has to do with JavaScript Origin policy. You'll have to use Domain Relaxing for this. Read all about it here:
http://help.sap.com/saphelp_nw04/helpdata/en/59/87b54064c2742ae10000000a155106/frameset.htm
here:
http://help.sap.com/saphelp_nw04/helpdata/en/5e/473d4124b08739e10000000a1550b0/frameset.htm
and here:
http://help.sap.com/saphelp_nw04/helpdata/en/cb/f8751d8c6b254dac189f4029c76112/frameset.htm

Cannot import photos from SD card into USB card reader after 10.4.10 update

Prior to the 10.4.10 update, I used a USB media card reader to import photos from my Canon camera's SD card and it worked fine. I just tried to do that for the first time since I installed the 10.4.10 update, and now the memory card doesn't show up in iPhoto as a disk from which to import photos.
I'm back to transferring pictures through the cable, which is a bit of a pain and a waste of a new media card reader. Is there a way to restore this ability to use the card reader?
Note: I switched from Windows to Mac in February 2007, and except for having to hunt for media card readers that work with the Mac and a few kernel panics due, I think, to a problem with my Logitech mouse drivers, it's been pretty painless.
Intel iMac Mac OS X (10.4.10) C2D 2.16 GHz, 2 GB RAM, 250 GB hard drive

This problem is not generic to 10.4.10 -- but it is specific to Intel based Macs. I have the same problem with a Zynet 8-in-1 USB-2.0 card reader. It fails to mount on 10.4.10 Intel based Macs but works fine on 10.4.10 PPC macs (and on 10.3.9 PPC too)
It is very annoying because connecting through my phone is very slow, especially when updating 2GB of MP3s.
The reader, with card inserted, is recognized, but no storage media is seen and of course it does not mount as a disk device like it should:
USB Storage Device:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 480 Mb/sec
Manufacturer: Generic
Product ID: 0x3260
Serial Number: 20030903213338562
Vendor ID: 0x0aec
There are no relevant error messages.
I hope Apple's reading these posts -- this sounds like a major, but all too common, FUBAR in the driver code. A fast fix would be very much appreciated!

Can't copy files to network share using migrated account

Man this is so bizarre. I got a new MacBook Pro and used the Migration Assistant to copy over everything from the old MacBook Pro. Everything seems to work except I can't copy files to my desktop via a network share.
What's totally bizarre about this is that I can delete and rename files from the network share! I can also drop into the command line and try copying - at first, I get "Operation not permitted", but if execute the command again, it works!
In the Finder, when I try to copy a file, I get a window that says:
"You may need to enter the name and password for an administrator on this computer to change the item named "xxx". If I click stop at this point, a zero-byte file is created on the target machine.
If I click Continue, I get another window that says "The item "xxx" contains one or more items you do not have permissions to read. Do you want to copy the items you are allowed to read?
If I click Continue, I get a final window that says "The operation cannot be completed because you do not have sufficient privileges for some of the items".
Note that this also happens in the opposite direction when I connect to my notebook from my desktop.
Also note that this only happens with the account that was migrated. I can successfully copy files if I setup a new account.
I've repaired permission on both machines. My old account on the old MacBook Pro still works fine, btw.
I've seen other posts with people having this problem, but I've yet to see a good solution.

I had the same problem, but I managed to fix it.
In WGM check that the sharepoint of your users Home Folder is set to owner root with Read and Write permissions.
I also created an ard_admin group in WGM and enabled open directory management on the client Macs. (Page 62 of the ARD admin Guide.)

Cannot copy files from my network using finder

If I try to copy files from my NAS or my PC to my Macmini running Leopard, I cannot copy files that are larger than 64kb. Otherwise I get an error message. Interestingly, if I use the cp command in the console instead, he can copy the file, but the file is corrupt in the sense that it is smaller than the original and not working. Weirdest thing is that I can access the same files from itunes or iphoto or vlc or whatever. Any ideas?

After the update I cannot connect to my router anymore
(see other threat)

How to I copy files across a Network using 10.9?

On earlier versions I could find another Mac on the network and log into it to enable me to see the file structure. To copy files from one machine to another i just dragged a file or folder full of files from the folder on the source machine to a folder on the destination machine. Since upgrading my machine to 10.9 I find that the files on the destination machine are all 'denied access'. This was never an issue before. Is this a bug or is there a setting somewhere set to a different default than before that I need to find and change?

weston_front wrote:
Since upgrading my machine to 10.9 I find that the files on the destination machine are all 'denied access'.
When you select the destination Mac, do you still login with the user account that has Read/Write access?
Do the shared folders on the destination Mac have your user account included for Read/Write access?

NB305-N440BL getting 0a-0224-0000 file transfer error message using USB Thumbdrive

Doing total out of the box restore.
First off, Toshiba, in their infinite wisdom sends a DVD Rom to you when you order a Recovery Media for a Netbook which has NO DVDROM. I had to replace the HD after an accident and it is unreadable as a harddrive and had no backup. As a result, the only thing I have left is to try and copy that to a Thumbdrive, because my backpack dvd writer is not recognized by the bios when booting. I have a thumb drive big enough and have tried power iso with an extract to the thumbdrive, doing xcopy from the CD Rm as outlined here and other methods:
http://www.wikihow.com/Install-Windows-from-a-USB-Flash-Drive
I get the same error using the above two methods and could not get any further, I have tried to format the drive and delete the data, but I still get the message.....I am at my wits end. Is there any software that will explode out the swm files on the DVD to what they are supposed to be so I can try to copy the raw files over and do a win to flash of version 7 with maybe some success????
Any help would be appreciated.

I wouldn't try messing with transferring that data. You should call customer support and let them know about the mistake with the recovery media. It should have been sent on a USB stick.
- Peter

Guys give me a hint in how can i copy file/folder from mac to usb ?

I´m trying to transfer some files from my mcbook Pro retina display to external disc(usb) and i´m not able to. Anybody can help me in this case?

kytavares wrote:
I´m trying to transfer some files from my mcbook Pro retina display to external disc(usb) and i´m not able to. Anybody can help me in this case?
Is "transfer" nondestructive (copy) or destructive (move/delete) from your rMBP to the external USB.
Are you using the Finder, or Terminal commands for this process?
Is the external USB device formatted as either FAT or HFS+?
If you receive error messages, can you share them here?

Can´t copy files from my backup-disk (usb)

Hi
I´ve a strange experience with my external USB-Drive. I formated it with Mac OS Extended (Journaled), copied my files onto it and everything worked fine. Now I tried to move some files from this disk back to another, but it does not work. I can´t move any files, even not on the same disk (for example into another folder).
First thing I took care is the Informationfield, but all rights were as they sould be on "read and write".
Strange is: I can read these files (for example I can play a file in Quicktime), and make a copy in the same directory, but I can´t move or copy them into another folder or onto another disk.
Anyone knows about this problem and how to solve it???
Thanks a lot

Bless you Malcolm. I had been assuming my disks needed repairing and was very dejected when the problems persisted after repair. I learned a lesson - to be more disciplined in naming my files - short and sweet!
Thanks to you I can now copy weeks of hard work to master back up.

Powermac 8500 USB Card

I have bought a PCI USB card for my Powermac 8500. The Card has a Opti 82C861 Firelink chip. This card works with my USB Mouse, Keyboard and Gamepad and I would like to use USB pendrives with my computer. I have tried with my Digitor 2gig USB pendrive but I don't think it is being detected properly. Would this be possible?
The USB card is the only PCI card I have installed in my mac in the bottom slot.
I reinstalled Mac OS 9.0.4 and upgraded it to 9.1 after I installed my USB card.
The installed drivers are whatever Mac OS 9.0.4 and 9.1 have installed and also the USB Adapter Card Support 1.4.1
System Start up (Nothing Plugged in)
System Profile
USB 0 1.4.6 No devices found on this bus.
PCI Slot C1 USB card
Card type : usb
Card name : pci1045,c861
Card model : Not available
Card ROM # : Not available
Card revision : 16
Card vendor ID : 1045
Show USB alerts and events
Show all USB events
86.357: Expert - Initializing disk based USB Expert 1.4.6
94.592: [ 123456789]: UIM - UIMEndpointDelete: Could not find endpoint -6987
94.592: [ 0]: USL - UIMEDDelete did not get lock on UIM 0
94.592: [ 0]: USL - UIMControlEDCreate did not get lock on UIM 0
94.594: [ 0]: USL - setting status to level 3
98.917: [ 75576057]: Expert - LoadClassDriver: USBHub1Apple - calling driver initialize routine... 0
98.918: [ 75576057]: Expert - LoadClassDriver: USBHub1Apple - driver initialization completed 0
98.919: [ 75576057]: Driver - Externally powered Hub attached - power supply good 0
100.182: [ 0]: Expert - Bus Enumeration using disk-based drivers (mSec): 5616
100.185: [ 0]: Expert - Could not find Native Power Manager Lib 0
221.191: [ 0]: Driver - • Web Download: FolderMgr: unknown message 0
Plug in a USB Mouse
USB 0 1.4.6 Mouse (Genius Wheel Mouse)
Product ID : 14 ($e)
Vendor : KYE Systems Corp.(Mouse
Systems) (KYE)
Driver version : 1.4.6
Driver : USBHIDMouseDriver
Power (mA) : 500 ($1f4)
Release number : 2.4.2
Serial number :
Show USB alerts and events
Show all USB events
372.494: [ 75576044]: Driver - Hub Driver - Device found, calling USBHubAddDevice. Port 2
373.864: [ 75576301]: Expert - LoadClassDriver: USBCompositeDevice1.4.6 - calling driver initialize routine... 0
373.869: [ 75576301]: Expert - LoadClassDriver: USBCompositeDevice1.4.6 - driver initialization completed 0
374.469: [-1744500223]: Expert - LoadInterfaceDriver: USBHIDMouseDriver - calling driver initialize routine... 0
374.474: [-1744500223]: Expert - LoadInterfaceDriver: USBHIDMouseDriver - driver initialization completed 0
374.493: [ 0]: USL - processDelayQ delayQueueChanged, breaking 0
Plug USB Keyboard
USB 0 1.4.6 Keyboard (Compaq USB Keyboard)
Product ID : 82 ($51)
Vendor : Compaq Computer Corporation
(CHICONY)
Driver version : 1.4.6
Driver name : USBHIDKeyboardModule1.4.6
Power (mA) : 500 ($1f4)
Release number : 1.0.5
Serial number :
HID (Compaq USB Keyboard)
Product ID : 81 ($51)
Vendor : Compaq Computer Corporation
(CHICONY)
Driver version : 1.4.6
Driver name : USBHIDDriver
Power (mA) : 500 ($1f4)
Release number : 1.0.5
Serial number :
Show USB alerts and events
Show all USB events
1384.670: [ 75576057]: Driver - Hub Driver - Device found, calling USBHubAddDevice. Port 2
1385.963: [ 75577084]: Expert - LoadClassDriver: USBCompositeDevice1.4.6 - calling driver initialize routine... 0
1385.968: [ 75577084]: Expert - LoadClassDriver: USBCompositeDevice1.4.6 - driver initialization completed 0
1386.628: [-1744499709]: Expert - LoadInterfaceDriver: USBHIDKeyboardModule1.4.6 - calling driver initialize routine... 0
1386.634: [-1744499709]: Expert - LoadInterfaceDriver: USBHIDKeyboardModule1.4.6 - driver initialization completed 0
1387.204: [-1744499452]: Expert - LoadInterfaceDriver: USBHIDDriver - calling driver initialize routine... 0
1387.210: [-1744499452]: Expert - LoadInterfaceDriver: USBHIDDriver - driver initialization completed 0
Plug in Digitor 2Gig USB pendrive
USB 0 1.4.6 Class 0
Product ID : 357 ($165)
Vendor : Vendor 4871
Driver version : 1.4.6
Driver name : USBCompositeDevice1.4.6
Power (mA) : 500 ($1f4)
Release number : 1.0
Serial number :
Show USB alerts and events
Show all USB events
365.241: [ 75576016]: Driver - Hub Driver - Device found, calling USBHubAddDevice. Port 2
365.490: [ 0]: USL - findEndpointAddr -1
365.490: [ 0]: USL - Stalling pipe 75576064
365.491: [ 75576016]: Driver - Hub Driver Error - Setting the device address -6910
365.491: [ 75576016]: Driver - Hub Driver - Set address failed, increasing time 1
365.491: [ 75576016]: Driver - Hub driver - disabling dead port 1 2
365.491: [ 75576016]: Driver - Hub driver - (1) dead port dead port disabled 2
365.497: [ 75576016]: Driver - Hub Driver - Device found, calling USBHubAddDevice. Port 2
365.725: [ 75576016]: Driver - Hub Driver - Set address failed, giving more time 3
365.766: [ 0]: USL - findEndpointAddr -1
365.766: [ 0]: USL - Stalling pipe 75576192
365.767: [ 75576016]: Driver - Hub Driver Error - Setting the device address -6910
365.768: [ 75576016]: Driver - Hub Driver - Set address failed, increasing time 2
365.768: [ 75576016]: Driver - Hub driver - disabling dead port 1 2
365.768: [ 75576016]: Driver - Hub driver - (1) dead port dead port disabled 2
365.784: [ 75576016]: Driver - Hub Driver - Device found, calling USBHubAddDevice. Port 2
366.003: [ 75576016]: Driver - Hub Driver - Set address failed, giving more time 36
366.083: [ 0]: USL - findEndpointAddr 2
366.083: [ 0]: USL - Stalling pipe 75576531
366.083: [ 75576016]: Driver - Hub Driver Error - Could not re-read all of device descriptor after set address -6915
367.071: [ 0]: USL - findEndpointAddr 2
367.071: [ 0]: USL - Stalling pipe 75576531
367.071: [ 75576531]: Expert - Request string descriptor - Error (read entire string) = -6915
367.071: [ 75576531]: Expert - Error returned from GetStringDescriptor: -6915
367.073: [ 0]: USL - findEndpointAddr 2
367.073: [ 0]: USL - Stalling pipe 75576531
367.073: [ 75576531]: Expert - Request string descriptor - Error (read string length) - Error = -6910
367.073: [ 75576531]: Expert - Error returned from GetStringDescriptor: -6910
368.552: [ 75576531]: Expert - LoadClassDriver: USBCompositeDevice1.4.6 - calling driver initialize routine... 0
368.557: [ 75576531]: Expert - LoadClassDriver: USBCompositeDevice1.4.6 - driver initialization completed 0
368.571: [ 0]: USL - processDelayQ delayQueueChanged, breaking 0
368.584: [ 0]: USL - processDelayQ delayQueueChanged, breaking 0
368.874: [ 0]: USL - processDelayQ delayQueueChanged, breaking 0
368.917: [ 0]: USL - processDelayQ delayQueueChanged, breaking 0
368.921: [ 0]: USL - processDelayQ delayQueueChanged, breaking 0
368.970: [ 0]: USL - processDelayQ delayQueueChanged, breaking 0
368.989: [ 0]: USL - processDelayQ delayQueueChanged, breaking 0
369.007: [ 0]: USL - processDelayQ delayQueueChanged, breaking 0
369.041: [ 75576016]: Driver - Hub Driver - port Set address failed, giving more time 36
369.041: [ 0]: USL - processDelayQ delayQueueChanged, breaking 0
369.084: [ 0]: USL - processDelayQ delayQueueChanged, breaking 0
369.107: [ 0]: USL - processDelayQ delayQueueChanged, breaking 0
369.148: [ 0]: USL - processDelayQ delayQueueChanged, breaking 0
369.154: [ 0]: USL - findEndpointAddr 2
369.155: [ 0]: USL - Stalling pipe 75576531
369.155: [ 75576016]: Driver - Hub Driver Error, resetting port - could not re-read full device descriptor after set address -6915
369.254: [ 0]: USL - findEndpointAddr 2
369.254: [ 0]: USL - Stalling pipe 75576531
369.254: [ 75576531]: USL - Cache config descriptors failed with error 1
369.256: [ 0]: USL - findEndpointAddr 2
369.256: [ 0]: USL - Stalling pipe 75576531
369.256: [ 75576531]: USL - Cache config descriptors failed with error 1
369.258: [ 0]: USL - findEndpointAddr 2
369.258: [ 0]: USL - Stalling pipe 75576531
369.258: [ 75576531]: USL - Cache config descriptors failed with error 1
369.259: [ 0]: USL - findEndpointAddr 2
369.260: [ 0]: USL - Stalling pipe 75576531
369.260: [ 75576531]: USL - Cache config descriptors failed with error 1
369.261: [ 0]: USL - findEndpointAddr 2
369.261: [ 0]: USL - Stalling pipe 75576531
369.261: [ 75576531]: Fatal Error: USBCompositeDriver: Too many retries, -6999, 8194
369.261: [ 75576531]: USL - Cache config descriptors failed with error -6915

Because the "USB Adapter Card Support 1.4.1" drivers pre-date the OS 9.1 Update, you should not use that installer beyond OS 8.6. OS 9.1 provides broader USB support and its included drivers can be manually installed on systems running OS 8.6 for better recognition of devices. You should find the following drivers in the Extensions folder, with #2 being essential for functionality of USB flash/hard drives:
(1) USB Support
(2) USB Mass Storage Support
(3) USB Device Extension
(4) USB Software Locator
(5) HID Library
(6) SerialShimLib
(7) ENETShimLib
How many ports are on the card? On older legacy Macs, I generally installed USB 1.1 cards having 2 ports. An external powered hub is useful, if there are many devices to connect - especially a bus-powered hard drive. I'd also recommend installing more memory. OS 9.1 could use a little more than 64 MBs of installed memory.

Copy pictures from iphoto 08 to sd card

Can someone tell me step by step how to copy pictures from iphoto 08 to an sd card using a card reader?

hi, is there a way to have the SD card appear directly in iphoto in a way that allows you to drag and drop photos into it the same way you might do so with an album? I tried doing this with the default format of the SD card and it would show up but not let me view the contents or copy photos onto the SD card. They I tried using disk utility to reformat the SD card as a macOS Extended device and now it doesn't even show up in iPhoto. The main reason I'm trying to do this is so that my father will have an easy way to transfer photos from iPhoto to his digital photo frame using the SD card. Any ideas would be much appreciated.

XML Signatures using Smart Cards

Hello guys,
I know this is not exactly a javacard topic, but I think this forum is where I 'll get the best replies.
We need to perform XML document signatures and verification using smart card stored certificates. The certificates are created using Microsoft Windows 2003 CA and stored in the cards using the cards' CSP.
I have a notion on the libraries that I am going to have to use:
- sun.security.pkcs11 for the smart card access,
- java.security.* for cryptography stuff (keystore, public-privateKey etc.),
- sun.security.cert.X509Certificate for the certificates,
- org.apache.xml for the xml documents.
Could you please verify that I am heading to the correct direction? I would be glad if you could suggest suitable starting points, similar scenarios etc. If you think that there is a more appropriate forum for my question please tell me so.
Thanks in advance for your help.

yes you are moving towards right directiong actualy PKCS11 is a standard that is used for hardware cryptographic operations so it would be used for smart cards 2. I'll suggest u to use a wrapper and provider API given by IAIK it would help u a lot and will also ease ur work

Permission Error when copy files into cmsdk using NFS with non admin user

Hi All,
We are using CMSDK with NFS protocol and we have created different users with ACL to control different access for users.
When we copy files into cmsdk folders using one of the admin user this works fine, even a multiple copy works fine. But when we use any non admin user , some time copy commands works but some time it throw a permission deny error. and this is happening very intermittently.
when we use ftp protocol and ftp file it's all works fine for the both admin & non admin user. Is there any limitation in using CMSDK NFS protocol
Did any one encouter any similar issue. Any pointers would be of great help.
Thanks in advance
Regards,
Navin

Hi All,
We are using CMSDK with NFS protocol and we have created different users with ACL to control different access for users.
When we copy files into cmsdk folders using one of the admin user this works fine, even a multiple copy works fine. But when we use any non admin user , some time copy commands works but some time it throw a permission deny error. and this is happening very intermittently.
when we use ftp protocol and ftp file it's all works fine for the both admin & non admin user. Is there any limitation in using CMSDK NFS protocol
Did any one encouter any similar issue. Any pointers would be of great help.
Thanks in advance
Regards,
Navin

Copying files to SD card using USB card reader

Similar Messages

Maybe you are looking for