Copying individual objects - customizing or BADI?

Hi everybody,
we are working with CRM 7.0 and we use the copy functionality for individual objects. Now we want for example that the partners from the assignment block parties involved in the individual object are copied.
Does anybody know if this is customzing, some kind of copy control? Or do we need to use a certain BADI? if yes which BADI?
Thanks a lot.
Torsten

I think we found a BADI where to do the needed changes: COM_PRODUCT_COPY.
But if anyone knows a customizing, please reply
Thanks.
Torsten

Similar Messages

Replication of warranty data from Equipment in ERP to CRM Ibase at individual objects

HI All,
I have replicated Equipments from PM to Individual Objects in CRM, i am trying to get the customer warranty Start and End date updated at individual objects from equipments at Iq03,
please suggest the steps both ways possible through standard and technical.
I have created warranty products in CRM when i am trying to add warranty product manualy to the ibase at individual objects i am getting an error
Relationship type IOBWTY for source object type BUS1178 cannot be maintained
regards
Nikhil Chugh

Hi Nikhil,
Though not for the exact error message but I would advise you to check the below SAP KBA:
1899474 - Relationship type &1 for source object type &2 cannot be maintained (message number COM_IL015)
Or, you may try to debug out where the error is getting raised in the manual process of warranty addition.
/Hasan

Missing of Business partner and Individual objects linkage.

Hi ,
We are implementing CRM 7.0 service.We don't have equipments(cannot able to see it in IE03 and equipment number will be in EQUI,Since equipment view is not activated in serial number profile of material) and have serial numbers generated for the sales order line item.Hence we opted for download of serial number and serial number configuration(VC) after making all necessary config settings and Iam able to see it in webclient under INDIVIDUAL OBJECTS(NOT IBASE).Also able to search individual objects based on product ID(Material) or serial number or BP wise in webclient.
Now Iam facing the the following issue
Iam not able to search the individual objects based on BP for the old data(data created in ECC before we did related configurations in CRM).whereas Iam able to search the same old data based on product ID and Serial number,meaning BP linkage is missing for the old data.
Can anyone suggest what is missing.
Regards
Suresh.

Ok thanks .. waited 4 years for the Partner and Competitor to be reportable .. so what's a few more years for being able to customize the 'ADD' screen !! :)
As far as the default values ..
I want to default the 'Relationship' field to 'Customer' and the 'Reverse Relationship' field to 'Vendor'. I tried adding as default value:
[<RelationshipRole>] = LookupValue("PARTY_REL_TYPE","Customer")
I'm probably doing something wrong in this expression, but can't seem to make it work !
Thanks.

How not to Copy PD infotype records while copying an object (eg org unit)

Hi Experts!
Is there a possibility exclude an infotype from copying while we copy an object for example org unit (o) or position (s)?
We have a custom infotype that holds unique data for this particular object and should not be copied automatically, but unfortunately when we copy for example a position, this record is also copied automatically.
Please Help!

Hi,
Please follow SPRO>Personnel Management>Organizational Management>Hierarchy Framework>Exclude Infotypes when Copying Internal Objects and make the desired entries for object type and the custom infotype.
Go through the supplied SAP documentation on this IMG activity for a better understanding.
Hope this helps.
Donnie

Creating campaigns with individual objects

Hi,
I would like to create a "file" extract of the target group from a campaign to include both Individual object and business partner information. Can any one please let me know how to do this ?
For example: My campaign should include all customers who bought a laptop in the last 30 days. And the file extract of the target group should have info about the model number of the laptop (Set type) Unique ID (I-object ID) and customer information like name, address etc.
I am able to create an attribute list having both search parameters but I am having trouble extraction the target group containing both objects and BPu2019s to a file. Can you please help
Any alternatives are also welcome
Thanks and regards
Reddy

Hi Zhenglin,
Currently in the SAP 7.0 UI i can download the TG using "Export" to excel function but the TG field for Iobjects is not present. There is also an option called "View related Objects" button however that gives me all the Iobjects related to the BP which may not be relevant to the campaign (Eg. If the customer owns two laptops, one bought 5 years back and another 2 weeks back - Both the objects are displayed where as i just need the one relevant to the campaign)
Can anyone please tell me how to add the relevant Iobject to this TG list on the UI..
Thanks
Reddy

Product registration--- individual object- installed base

HI all,
As soon as i register the products in ICSS, it creates individual objects.
1)HOw can it be automatically added to Existing ibase of customer?
2) Or how can it be created itself automatically as Installed base.
Please give me some valuable suggestions .
Thanks,
Priya

Hi Priya,
The product registration process in ICSS is the creation of a standalone individual object. If you want to have an ibase node created please use the ibase functionality and add a node component (product or object) to an existing ibase or create a new ibase.
regards,
Riad Hijal
SAP CRM e-service product manager

Quantity Unit for individual objects missing.

Hi,
i have the following problem using mobile service.
We need to enter individual objects in the service confirmation. I can select one, but the dropdown for the quantity unit is empty. Because of this beeing a mandatory field, i can not save the service confirmation. The select statement coming from the corresponding comboengine is using the SFAMARA key to search the SMOMARM for this information. This table is empty for individual objects.
Each equipment has a back reference to it's original material wich has got the information, even in SMOMARM.
so my question: In CRM-Online the back reference is used, in Mobile its using the individual object key. I would identify this as a bug. We are using Mobile 5.0 SP7, CRM 5.0 .
Has anybody experience with this and can support me? i found nothing in OSS! Maybe some customizing in CRM-Online or MSY. I don't know.
Thanks a lot,
Andreas Rose

Hi,
IObjects cannot be entered as items for service confirmations or orders as it makes no sense at all.
The reference to one or more IObjects will be done in Tileset <Subject/Objects> or <Item Subject/Objects>, Tile <Reference Objects>.
Regards,
Wolfhard

Individual Object assigned 2 Reference Product

I want to use Individual Object with referencing Data from Products in CRM 5.0 SAPGUI.
Help link CRM 5.0:
http://help.sap.com/saphelp_crm50/helpdata/en/a9/42388d7cb5c24ba5a3701a13aa9ea4/frameset.htm
The steps I made:
In trx COMM_HIERARCHY I added the following category:
R3PRODSTYP
- MAT
-- MAT_HAWA
--- ID_REF (added)
For cat MAT_HAWA, in tab Relnship Types:
- PRDSCPS Customer/Distribution Chain for Product
- IOBMP S IOBMP/S
- IOBQFRS IOBQFR/S
- PROREFS Reference Product for Individual Object
For cat ID_REF:
Assigned to object family Z001
Additional Settype ZS0001
I have created a material Z900016 of the type MAT_HAWA,
In the Installed Base 100, I created a component Building A. Tab Product I added the created material Z900016. Tab Individual Object I added Family Z001 and Object ID z1234. After selecting the IO component I press the icon Component Detail.
I can see my additional settype ZS0001 chars but I don't see the reference data of Z900016.
Any suggestion is appreciated,
Kim

Dear Raj,
Thnks for reply but the problem remains. Just to be sure:
Product Z900016 has the category MAT_HAWA. The date maintained for this category is:
MAT_HAWA:
- Tab CATEGORY: Product/Object Assignment Possible
- Tab RELNSHIP TYPES: Reference Product for Indivual Object
One level down of MAT_HAWA the category ID_REF is maintained:
- Object Family: Z001
I create IB 415 Customer 01
- Building A (Text)
-- 900016 (Product)
--- Family Z001 (object fam) + Z900016V01 (Object ID)
When I open the pop-up for Object ID you can search using 'REFERENCE PROD ID' but the system doesn't show any hits. When I enter Z900016v01 and select 'Component Detail' I see the own settype and the general settypes of the product. But the date in the general settypes are all empty.
Kim

Individual object download from r/3

Hi folks
I am trying to download equipment master as individual object in crm.
Any tips??
Itty

Hi Hun,
To restrict materials or any of the data for any of the download object,
Go to R3AC1, select the download object, go to tab Filter and set the filters
for eg.
Object: Material
You want to download materials between number 1000 and 1500
go to filter tab,
set value for following filter record
Table Field Operator Value1 Value2
MARA MATNR BT 1000 1500
To download customer object user object
Customer_Main
and to download relationships of Customer use object
Customer_rel
Best Regards,
Pratik Patel
Reward with Points!

Individual Object Creation

Hello,
We need to create individual object (Vehicle, in our case) in the CRM system from external system data.
The individual object is very simple and contains only basic data and referenced product without any sales, tax or unit of measure data.
As far as we search, we have only found out the IDOC CRMXIF_PORDUCT_INDOBJ_SAVE01.
1. It seems that the IDoc requires sales, tax and unit of measure data. Is it possible to create individual object without it?
Furthermore, the IDoc/FM does not contain any documentation. Is there any available documentation/example for usage?
2. Is there any other IDoc/Function module for creation of individual object?

Hi Nachson
In what way are you using IO's?
The BAdI's are (unusually) tied to the UI .
Example: definition CRM_ICWC_IOBJECT.
Do you have the relevant IO cookbook? The Best Practices documentation contains a few that are very helpful for IO coding, as nearly everyone who uses them has some specific functionality to add in.
Cheers
Dom

Copy individual pages

Is there a way to copy individual pages and related page items (such as templates) from on application to another? There are 2 of us working on a large application and we are each working on different pieces in our own applications. However, we would like to copy our work into a single application for testing and deployment. Any ideas?
Howard

hey howard--
when you go to export your application from htmldb, you'll see an "Export Pages" link in the "Tasks" region in the lower right corner of the screen. you can use that to move individual page definitions across. the shared objects to which your pages refer won't come across in those page exports, though, so you'd have to keep that in mind. one way around that would be for you two to develop your pages in two separate apps that each subscribe to the shared objects (such as LOVs, Auth schemes, and templates) of a third "empty" app. that would give you the extra level of granularity to deploy changes to the common objects app, just your app, or just your colleague's. (your two apps could be tied together at the authentication level, of course, to make for seamless hopping to and fro).
hope this helps,
raj

Business partner in Fact Sheet for Individual object

Hi Folks,
I am unable to see the assigned business partners on the Fact Sheet for an Individual object. I have created the iObject in the portal. Here, I could not assign any BP's during the creation as the system does not have this option. I then went ahead and created an Installed Base and assigned this iobject to it in the CRM system in transaction [IB51] "Create Installed Base". I then went ahead and assigned the Business Partners to this iObject.
The situation is that I can see the assigned Business Partners in the Portal for this iObject/Component for the Installed Base in the "Installed Bases/Components" tab but when i go to the "Fact Sheet for Installed Bases" tab I am unable to see the assigned BP's.
I haven't been able to find any documentation on it either. Can someone please help.
Thanks.

Hi,
Did you ever solve this issue?
I too am having the same problem and cannot display the factsheet or summary using the 'Go To' button in EP.
Any help would be much appreciated.
Regards
Jo

Object Custom Program Name of class RE and language EN does not exist

Hi All,
We are getting this bbelow error while running a custome program ,
Object <Custom Program Name> of class RE and language EN does not exist
Do any one has faced this similar issue earlier.
Regards,
Sen

Hi,
How did you resolve this problem ?
Re: Object <Custom Program Name> of class RE and language EN does not exist.
I am also encountering the same issue when I am executing the report.
Regards,
SSR.

Creation of individual object in crm

Hi All,
Can anyone help me how to create an Individual Object in CRM.
I have created Equipment in R/3,replicated to CRM.
Now when i am trying to create Installed Base i dont find any Individual Objects on the Individual Object tab in the Installed Base screen.
I have even done the required configuration of the Individual Object.
Please help me on this issue.
Thanks,
Kalyan

Hello Everyone,
Iam trying to Download Equipments from ECC 5.0 to CRM 5.0.
Iam getting a Validation Error in the Bdoc CRM_EQ_DMBDOC.
The Error Message is Assign a Base Category to the Product.
I have the Base Hierarchy R3PRODSTYP Assigned to the Application
Product.
And i cannot edit the Hierarchy or Categories since they are Downloaded
from ECC.
Please let me know how to Specify a Base Hierarchy/Category for the
Equipments to get Downloaded as Individual Objects.
I should also be able to create Individual Objects Directly in CRM.
Using IB51 too i get the Same Error it says Product Category not
Avaiable for Object Family 0401.
Please Advice!!!
Thanks & Regards
Kumar

When I duplicate or copy slides, my custom theme images turn into question marks. Why, and how can I copy themes with slides?

When I duplicate or copy slides, my custom theme images turn into big grey boxes with an 'x' through them and a question mark in the middle in their new destination. When I go look at the master slides, I see that there are now two sets of masters, one for the my custom theme and a new one just like it, but with no images.
How can I copy (or duplicate) my slides?

OK, got it ... the Power ON Factory reset procedures might have changed with GB ...
To get to a Factory reset using the Power up method:
1. Power Off phone
2. Press & Hold the HOME Button
3. Press and Hold the Power ON button.
You come up to the Triangle with the Exclamation mark & android guy.
Press BOTH the Up and Down Buttons at the same time. This brings up the Blue menu of options.
use the Up/Down arrows to scroll thru the choices. Press the POWER Button to Select the menu item you choose.
You can harmlessly test this and just choose to Reboot without doing anything, just to see how it works in case you ever need to do this in the future.
edit: It was concluded in the test group that they changed this process to align it with the new DX2 as the camera button isn't hard-wired like it is in the DX. So likely they just wanted to make this process the same for both platforms. At least it sounds like a good reason...

Copying individual objects - customizing or BADI?

Similar Messages

Maybe you are looking for