Copying is not poss.because an entry is missing in Table TVCPL: AF

Good night,
When Create outbound delivery with order reference, got an error :
Copying is not poss.because an entry is missing in Table TVCPL: AF
Message no. VL473
go to t-code :VTLA
want to create target delivery for AF but no selection for AF.
Order transaction using TAV.
Guru, guide me please.
Thank you,

Hi
You have to create teh copy control from order to delivery process in VTLA
You can copy the s tandard one OR to LF and then create copy control for   your new document  types.
You have to configure at the header and item levels in this tcode. For detailed information, you can put F1 in each field and find out the purpose of each field.
Reward if this helps.

Similar Messages

  • Copying is not poss.because an entry is missing in Table TVCPL: L2, VTLA

    HEllo all,
    we just created a new condition type.
    (Re: sales order - new condition type - account assignment)
    Now when I create a new sales order and use this condition type, it is working fine. When I want to deliver the order, it gives me this error message:
    Copying is not poss.because an entry is missing in Table TVCPL: L2
    So now according to other threads in this forum, I went to copy control settings in VTLA. Now I wanted to create entry for Target delivery type L2, but the problem is, there is no target delivery type L2??? It is not in the list.
    What can I do??
    Thanks
    Anne

    Hi Raja,
    that's what I tried to do:
    I created a new entry, entered L2 for target delivery type and OR for source sls doc type.
    When saving I am getting:
    Entry L2   does not exist in TVLK - check your entry
    Thanks
    Anne

  • Copying is not poss.because an entry is missing in Table TVCPL: ZO26

    Hi..
    In VL01N - outbound delivery , the following error occurs
    "Copying is not poss.because an entry is missing in Table TVCPL: ZO26 "
    here ZO26 - Sale doc. type
    Plz give me the solution , as soon as possible.
    Regards
    Deepa.

    Dear Friend,
    Please check you document flow settings ..
    What is understood from the error is that your item categories which are determined in the sales order are not relavent for delivery.
    While coping your item categories did you check for coping all the relavent item catwgories detminations.
    Next chech which item categories is determined and copy control settings.
    The problem here is the order documents items are not able to copy into delivery  because of your document flow setting.
    Check the same .You will be able to get the error.
    reward points if helpful,
    regards,
    Amlan Sarkar

  • Copying is not poss.because an entry is missing in Table TVCPL: Z03 Z15 Z25

    At the VL01N transaction itgives out a message of :"Copying is not poss.because an entry is missing in Table TVCPL: Z03 Z15 Z250" . I can't make the delivery even nor pass the initial screen of VL01N. Can anybody help me with brief explanations?
    Thanks in advance.

    Hi Hikmet Akcali,
    Copy Control for Delivery is not maintained in the system for Delivery type Z03 Sales Doc type Z15 and Item category Z250. Thats why you are getting this error.
    Please maintain the copy control settings in VTLA ( copy control sales doc to delivery doc)
    For this go to VTLA ( tcode) and create entry for Target delivery type Z03 and source doc type Z15 , by copying from an existing combination which is most similar to this Dely doc / sales doc combination.
    If this entry already exist then , create the entry for the Item category Z250 in the item level at VTLA. Maintain the settings like copying requirement and other field suitably.
    Save the settings and then create fresh delivery against the order.The error will not pop up.
    Thanks!

  • Copying is not poss.because an entry is missing in Table TVCPL: ZOV2 ZDV2

    Hi,
    I created  sales order and delivery for consignment purpose and for return it I create return sales order again, but at the time delivery creation the system shows me the error:
    "Copying is not poss.because an entry is missing in Table TVCPL: ZOV2 ZDV2"  Message no. VL473
    I checked VTLA and copy sales order type to delivery type with following data:
    Order requirements: 001
    Combination requirement : 051
    Header data: 001
    and copy item category REN as follow:
    order requirements: 101
    Item data: 101
    business data : 2
    but problem still remained. So I want to know how I can fix this error message?

    Dear,
    Table TVCPL is the table which is used for copy control so the error says maintain it properly and as per message
    there is error of Copy control Between Document ZOV2 to ZDV2 so I would suggest following step,
    1)Check the Item Cat.(REN) is define for delivery (ZDV2) check it out if Item Cat. (REN) determination is done in Delivery
       That is the only thing which will be missing, if stil problem exist then
    2) Do set Copy Control altogether again just copy it between RE TO LR and rename as ZOV2 and ZDV2 and retry ur process.
    AND IF U ARE DOING CONSIGNMENT PROCESS THEN LET ME KNOW AS IT REQUIRE DIFFERENT SETTING.
    Regards
    AJIT K SINGH
    HAPPY TO HELP U

  • Copying is not poss.because an entry is missing in Table TVCPL: ZOR3

    Copying is not poss.because an entry is missing in Table TVCPL: ZOR3
    Message no. VL473
    Murli

    hi
    maintain copy control for sales documents to delivery documents in VTLA
    zor3 to lf as target
    regards]

  • BLACK SCREEN stating "windows could not start because the following is miss

    I installed Bootcamp update 2.1 and then XP SP3.
    Now when I start up my Mac I am getting a BLACK SCREEN stating "windows could not start because the following is missing or corrupt: <windows root>\system 32-hal.dll Please re-installl a copy of hte above file"
    I tried to use the option key and insert the Windows CD but it won't start up.
    Also, when I start up I must use the option key and select the Mac OS and it will start up and everything is fine there. Advice appreciated.

    Did you ever solve this? I had updated to BC 2.1 (After updating Apple Software Update al on the Windows side) I waited & just tonight tried to install SP-3. It appeared to install & When I was prompted to restart--I also got the black screen. Mine said:
    Windows could not start because the following file is missing or corrupt:\Windows\inf\biosinfo.inf
    You can attempt to repair the file by starting Windows setup using the original setup CD-ROM. Select ‘r’ at the 1st screen to repair.
    I just force powered off & booted into Mac.
    I think I need to restart my Mac into Windows (using the Option key ) WHILE THE WINDOWS XP CD is in the optical Drive. Then maybe I’ll get a choice to select ‘r’ to repair at the 1st screen?
    You may need to do essentially the same thing. I do not know if this problem is a boot camp problem of just a Windows problem.
    Sure is annoying,
    Good luck!

  • TS4194 When I reboot my windows desktop i get a message that says apsdaemon.exe can not start because msvcr80.dll is missing.  How do i fix this?  Thank you in advance.

    When I reboot my windows desktop i get a message that says apsdaemon.exe can not start because msvcr80.dll is missing.  How do i fix this?  Thank you in advance.

    Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
    http://www.apple.com/itunes/download/
    (The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
    Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
    If you still have the same error messages cropping up, then try the procedures from the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • I have had problems with iTunes lately it says iTunes was not installed correctly and to reinstall I tried 3x and still will not. Now I get msg it can not start because MSVCR80.dll is missing reinstall to fix??

    I have had problems with iTunes lately it says iTunes was not installed correctly and to reinstall. I tried 3x and still will not. Now I get a message it can not start because MSVCR80.dll is missing reinstall to fix??

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Derived table 'tablename' is not updatable because a column of the derived table is derived or constant.

    Hi Guys,
    I have a With CTE table expression ,this cte gets the value from startdate and enddate
    I need to insert this startdate and enddate into a table ,while inserting into table,i got the below error,
    Derived table 'Datematrix' is not updatable because a column of the derived table is derived or constant.
    below is the query i used,
    declare @StartDate date='01/01/2013'
    declare @EndDate date='12/31/2013'
    ;WITH Datematrix(AllocationDate)
    As
    SELECT @StartDate AS AllocationDate
    UNION ALL
    SELECT DATEADD(D,1,AllocationDate) AS AllocationDate
    FROM Datematrix WHERE AllocationDate<@EndDate
    Insert into Datematrix(AllocationDate)
    select * from Datematrix 
    any guys update this solution.
    Thanks 
    Bhupesh.R

    ;WITH Datematrix(AllocationDate)
    As
    SELECT @StartDate AS AllocationDate
    UNION ALL
    SELECT DATEADD(D,1,AllocationDate) AS AllocationDate
    FROM Datematrix WHERE AllocationDate<@EndDate
    Insert into Datematrix(AllocationDate)
    select * from Datematrix 
    Hello,
    Your CTE bases only on fix value = @StartDate , not on a table/view; here do you want to insert data to? This don't work in any way.
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • Itunes does not start because msvcr80.dll is missing

    Having an issue since the new itunes updated to 11.1.4.62 on Windows 7x64.  After the update to 11.1.4.62, Itunes can not start because mscvr80.dll is missing.
    I have reinstaleed, uninstalled, reinatelled, same issue each time.
    When I search for mscvr80.dll, my computer has numerous locations for this. I search on another PC win 7x64, with itunes, and the same search does not show msvcr80.dll associated at all with itunes.
    Any ideas ?

    turingtest2 post 01/2014: MSVCR80.dll missing, cannot install iTunes - https://discussions.apple.com/message/24618776
    iTunes for Windows: Missing MSVCR80.dll - https://sites.google.com/site/appleclubfhs/support/advice-and-articles/itunes-wi ndows-missing-msvcr80-dll - install as administrator.

  • Acrobat not installing because msvcp90.dll is missing.

    acrobat not installing because msvcp90.dll is missing.   I don't know much about computers but is there a step bt step process someone can tell me to install this?  I checked the Microsoft website and couldn't find a link that looked correct.

    http://support.microsoft.com/kb/2019667

  • Debit entries are missing in table J_1ITRNACC

    Dear CIN experts,
    I have very strange problem in case of Capital purchase.
    My excise posting for capital goods is BED       100 Rs.
                                                                  Ecess       2 Rs.
                                                              H.Ecess        1 Rs.
    But at the time of excise posting in J1iex Accounting simulation is            BED   101.5   Cr
                                                                                    On Hold BED     50.0   Db
                                                                                    BED     51.5   Db 
    System is not considering 103 Rs amt for BED.
    After clicking on post system gives above error Debit entries are missing in table J_1ITRNACC.
    Please suggest for this problem.
    Regards,
    Gitesh

    Hi,
    SPRO-Tax on goods movement-India-Specify excise accounts per transactions.
    Check for GRPO & CAPE, whether Dr & Cr accounts are maintained properly or not.
    I think, entry is missing here.
    Regards,
    Piyush

  • Entry VEHICLE missing in table COM_SE_BUSOBJ

    Hi Experts,
    I’m facing an issue in SAP VMS (Vehicle Management System). If I click on the “Find” option in VELO transaction then list of vehicles will be displayed but system throwing following error” Entry VEHICLE missing in table COM_SE_BUSOBJ”
    Plz help me to solve.
    Thanks in advance!
    Regards,
    Naga

    Hi Naga,
    You have to maintain business object VEHICLE in customizing table COM_SE_BUSOBJ:
    SPRO -> SAP Netweaver -> Application Server -> System administration -> Search engine service -> Define business objects for search engine service
    Maintain record:
    Business object: VEHICLE
    Object type: 1
    You have to enter the Index-ID for SES, see F1-help.
    Regards
    Joachim

  • "The entry    is missing in table T030"

    Hi,
    I'm trying to close a period but, after all the selections made, when I execute I get this message: "The entry is missing in table T030". I mention that I'm trying to do this in localization for Romania. Maybe somebody could tell me what this message means and what should I do?!
    Thanks, Andreea

    Hi Andrea
    It looks like there is some account determination that is missing. Please recheck using TCode OBYC(relating to MM). Also please provide detailed information as to what transaction was exceuted when you got the error message.
    However do check your automatic posting procedures in OBYC.
    Regards,
    Karthik
    Message was edited by:
            Karthik Coneru

Maybe you are looking for

  • DPS Tips app updated for v19

    Apple approved the new version of the DPS Tips app: http://itunes.apple.com/us/app/digital-publishing-suite-tips/id436199090?mt=8 Instead of simply updating the app, which is usually the easiest approach, I recommend that you remove DPS Tips and then

  • How do I share files between 8.6 and windows XP

    I have set up my G3 with 8.6 OS with a shared documents folder, and all my Network settings on the XP PC are set up and working, I am on a ethernet switch, and I am now stumped as to what to do next. I'd like to be able to access my documents on the

  • Repair person didn't show up

    My Request Repair Status still shows: You have reported an issue with your Verizon Phone service on January 4, 2011 at 9:04 PM. A qualified Verizon technician is scheduled to arrive at your home on January 17, 2011 around 11:00 AMbetween8 AM and 12 P

  • ABAP or JAVA dynpro

    I am new to Dynpro concept. I saw two Dynpro can be built by two ways ABAP and JAVA. I wud like to know the difference + Want to know in short (Don't provide links) what is Dynpro concept and How Abaper should adopt it. Thanks in Advance.

  • I have lost the up/down scroll bar on the side of the screen of iTunes

    Suddenly the up/down bar on the right side of my iTunes screen is gone...I cannot scroll down through my music list.  Any ideas?