Copying Key figures between flexible sop info structures
Shall we use mcsz or olix to copy key figures between the infostructures planned with level by level planning. or Defining user methods and copy profile is mandatory??
Hello,
What was the correct transaction?
I am trying to accomplish the same.
I'm not sure to use MCSZ or MC7M to create the copy method.
Thanks,
Heidi
Edited by: Heidi Morosini on Feb 25, 2009 6:32 PM
Similar Messages
-
Copy Key Figures between Queries
Hi BI Gurus
I have two Queries 'Query-1' and 'Query-2' on the same InfoCube.
I want to make another query 'Query-3' which is the combination of 'Query-1' and 'Query-2'.
I have saved 'Query-1' as 'Query-3'.
Now, I want to add all the Key Figures in 'Query-2' into 'Query-3'.
All the 3 queries are on the same InfoProvider.
Please guide.
RegardsHI Anil
As mentioned by you that all th e thre queries are on same infoprovider hence all the key fig of that infoprovider are available to you in all the quries. If a key fig is created locally then save it in a structure and copy that structure in the new query.
Dinesh Sharma -
Copy Key figure data between two planning area with different storage bucket profile
Hi,
I have a DP planning area ' PA1' with monthly storage bucket profile data view 'PA1M' ( monthly TBF) and I want to copy the data to another planning area 'PA2' whose storage bucket is weekly. This would need me to write a custom program which will split monthly to weekly and then populate 'PA2'.
However, In 'PA2', I created two data views 'PA2W' (with weekly time bucket profile) and 'PA2M' (with Monthly Time bucket profile). If I am able to copy the data from PA1 (PA1M) to PA2(PA2M), it will automatically splits monthly to weekly in PA2W.
So my question is if there exists a way I can copy key figure data from PA1M to PA2M? Any BAPI?Hi Rakesh,
You can use COPY/Version Management Function to do this.
Path: Demand Planning > Environment >Copy/ Version Management
The system takes into account only those periodicities that are common to both planning areas.
For example, if the data is saved in months in the source planning area (PA1) but in months and weeks in the target planning area (PA2)
the system copies to months in the target planning area and then Disaggregates the data to the storage buckets in accordance with the Time-based Disaggregation.
hope this wil help to understand the basic concept.
Kapil -
How to find key figures not created in a Structure.
After using Where Used on a selection variable Z_FISCPER3_M_SV a list of Key Figures appear. I wish to amended these Key Figures as the selection variable used is incorrect. However, I cannot find these Key Figures in the Structure? Does anyone know how to find Key Figures not created in a Structure.
Thanks for such a quick response.
I am assuming the following about the table :
- Column u201CCALDAYu201D contains a date value for each day the Index is active.
- Column u201CBIA_USEDu201D contains a value that is iterated for the given day each time the Index is used.
- Column u201CBIA_NOTPOSSIBLEu201D contains a value representing how many times a query could not access this Index.
- Column u201CNO_BIAu201D tells if a BWA Index exists at all on any of my BWA Blades
- Column u201CBIA_TECHINAu201D ????????
- Column u201CBIA_INAu201D ???????
- Column u201CDB_FALLBACKu201D ???????
I am not sure if my understanding of the column is correct. Can you tell me they are? The columns with u201C???????u201D mean I have no solid understanding of how to use these columns at all.
Thanks -
Experts , i have a isuue and i need your help and let me explain , we have info structure maintained in SOP and i do see the key figures and characterstics maintained in MC23 ( S9XX),i need to see info structure plant specific PLant 100 and Plant200 since i need to see the differnce in settings maintained in 2 diiffernt plants . How can i view by plant specific since i see no where that it asks for plant as an input key, sincewe have some issues in 1 plant.
Hi,
Go to mc7f info structure planning parametrs there you can see the planning plant .
I hope that a infostructure can be assigned to any one plant ,
Thanks
thamizhchelvan g -
I have created an agg. level on a plan cube to input Planned Hours at a cost center level (Employee Excluded from Agg Level).
I then want to assign these planned hours to EVERY employee within that cost center. I currently have Master Cost Center as an attribute of 0EMPLOYEE, and I have created a characteristic relationship on 0EMPLOYEE to Cost Center. I am trying to use a copy function on a new Agg. level that includes employee, but have not been successful.
I am able to successfully perform the copy function if I specify exactly which employee I want to copy to, but how can I copy this key figure to ALL employees within this cost center?
Ex: Cube contains the following:
Cost Center Plan Hour
0000006405 155
I want top copy the value 155 to ALL empoyees who are contained within the employee attribute cost center 6405.
Emp: Emp_CC Cost Center Plan Hour
123 6405 6405 155
145 6405 6405 155
156 6405 6405 155
In the copy function, I am using # (not assigned) as the from value. This works if I input a specific employee as the to value. I have attempted to use ># as the "to" value in the copy function, and that produces the error "cannot generate combinations in step 00."Definitely on the right track. Can you please be more specific?
THe FOREACH loop is not returning any values for employee. In debug, it looksl ike this is trying to loop all entries of 0EMPLOYEE that already exist in the cube. Initially there won't be any employees in the cube. I am wanting to read the MD table of 0EMPLOYEE.
Here is what I have so far:
DATA ZEMP TYPE 0EMPLOYEE.
DATA CC TYPE 0MAST_CCTR. <= This is the CC in the cube
DATA EMP_CC TYPE 0MAST_CCTR. <= This is the 0EMPLOYEE attribute Cost Center
BREAK-POINT.
CC = OBJV().
FOREACH ZEMP. <= This foreach has no entries
EMP_CC = ATRV (0MAST_CCTR, ZEMP). <= Therefore this EMP_CC is blank
IF EMP_CC = CC.
{WCCMTRGD, ZEMP} = {WCCMTRGD, #}.
{WPLGLPRC, ZEMP} = {WPLGLPRC, #}.
ENDIF.
ENDFOR.
Any additional info would be greatly appreciates.
Thanks! -
Dear All,
I have created new Info Structure S502 and I wanted to assign my own characteristics "Sales Force" which is not available in standard SAP.
How to create this new characteric and assign to my info structure.
Should I need to create new Field catalogs also.
I gone through the saphelp but could not able to find there.
sdconsHi,
Go to mc7f info structure planning parametrs there you can see the planning plant .
I hope that a infostructure can be assigned to any one plant ,
Thanks
thamizhchelvan g -
How easy is to copy list view between lists with similar structures?
Hello,
I have two lists with identical structure in two site collections. How easy is to copy the user defined views from one list to another?
I wonder what my options are.
Thank you,ShareGate can also accomplish copying views, please review
http://en.share-gate.com/support/documentation/index.html?copy-lists-and-libraries.html
Keith Tuomi | Twitter: @itgroove_keith | Blog:
http://yalla.itgroove.net
Please click "Propose As Answer" if a post solves the problem or "Vote As Helpful" if a post has been useful to you. -
Key figures between Characteristics in Report
Hello All,
I have report like below.
Old Material - New Material - Old Desc - New Desc - Old Qty - New Qty.
ABC - BCD - AABC - BBCD - 10 - 20
But the client require format like below.
Old Material - Old Qty - New Material - New Qty - Old Desc - New Desc
ABC - 10 - BCD - 20 - AABC - BBCD
I am working in BI 7.0 environment.
Have any one faced this type of issue. If so please help to resolve it.
Regards
Sankar PHi,
Try to create Formula Variables with Replcament path on Old Material & New Material and then use it in Columns.
For Formula Variables with replacement path see ..
Calculating the Ageing of the Materials
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/a-c/calculating%20the%20ageing%20of%20the%20materials.pdf
https://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
Thanks
Reddy -
Difference between Key figure and a Key field?
Difference between Key figure and a Key field?
Thanks,
PramodHi,
Key fileds as just like your primary key of R/3 Tables.
Key figure are type of info object which is used to hold amout,value for your info providers..
check this link for key figures and there types...
http://help.sap.com/saphelp_bw31/helpdata/en/80/1a63b3e07211d2acb80000e829fbfe/frameset.htm
under "Tab Page: Aggregation". you can be able to find three aggregation options:
Minimum
Maximum
Sum
Types of non-cumulative keyfigures
Regards,
Viren. -
Adding a new key figure to Info Cube
Can I add a new key figure to an existing Info cube in which data is loaded?
Assume that In Info Cube we have the following.
Stu Id -- Characteristic
Maths , Physics , Chemistry -- Key figures
These are the info objects which are already available and transfer rules are already available for the same in the infosource.
Could any one let me know how to add one more new key figure (total ) , which is the sum of the three marks to the Info Cube and populate the data in to the same.
I have tried the following steps , but could not get the solution.
1). Create a new key figure info object (total).
2). Add the same to the communication and pull the same into transfer rules of the existing info source and activate the same.
3). Add the new key figure to the info cube.
4). Open transfer rules for the info cube and change the mode from NO updation to Addition for the particular key figure (total).
When I perform the 4th step it is giving a red symbol beside the key figure in update rules and I'm not able to activate the same.
Any help on how to add key figures to update rules and transfer rules is highly appreciated and points would be assigned.
Thanks1.add new Keyfigure to Infocube.
2.Go to Update rules> go to update type of that Keyfigure>selct formula in update method>create new formula>here you can add up your 3 keyfigures-->OK.
activate update rules and InfoProvider.Check all are active or not..
by using Export generate datasouce ,you populate data(historical data) to new keyfigure as well.Then you have to delete historical data requests.
or iyou can create formula in query designer as well as srinivas suggested.that would be better option. -
How to copy two different key figures in third key figure in different time bucket.
Hello,
I require to copy one key figure-A for 2 months (M+1 and M+2) in other Key figure C. At the same time, I need to copy key figure-B from 3rd month onwards (M+3 onwards) to same key figure C. Is there any way to do this, please suggest.
Regards
RajeevCheck the following thread
Defaulting to a KF from 2 KFs, based on different periods
Thanks,
Pramod -
To add new key figure in existing info cube (BI 7.0)
I m using BI 7.0
How can I add new Key figure in my existing info cube?
Thanks
KShi,
check the following the links
http://help.sap.com/saphelp_nw04s/helpdata/en/58/85e5414f070640e10000000a1550b0/frameset.htm
thread's regarding remodeling
Remodeling Toolbox
Remodelling option in 7.0
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=remodeling+&adv=true&sdn_author_name=&sortby=cm_rnd_rankvalue
hope this help you
happy new year 2008
regards
harikrishna N -
Info cube key figure quantity is more than the data source
Hi,
I am loading data from a custom table data source into an info cube. The data records and key figure quantity of the info cube is more than the data source custom table.
I checked the extraction in RSA3. The number of records records and key figure quantity are exactly extracted from the data source in RSA3 transaction.
But after loading using the info package, the number of records and the key figure quantity of the info cube is more than the actual records available in the data source. The update rule is simple 1 to 1 mapping.
Kindly help to troubleshoot this issue.
thanks and regards
MurugesanHi,
There could be some other data already avilable in the Infocube. Pls take the Request ID or Number from the last run of the Infopackage you used and check the records only for that Request ID in Infocube.
You can check the data in the LISTCUBE Transaction.
Please let me know of you need additional information.
Thanks,
Jeysraj -
Multi Provider : No Restricted Key Figure
Matez,
I have created an MultiProvider with 2 Info Cubes.
However, I don`t seem to see the restricted key figure's or even global structure's in the Query Designer of my MultiProvider.
Please advice if I need to enable any special settings ?Hi John,
If your base InfoCube is a complete subset of the multiprovider (i.e. all the chars and key figures of the base cube are contained in the multiprovider) you can try to copy the query from the base cube to the multiprovider using transaction RSZC. Sometimes if the structures are large and involving a lot of calculations, it may even make sense to modify the multiprovider temporarily, so that the query may be copied, and then later on chnage it according to the requirements.
Hope this helps...
Maybe you are looking for
-
How to access Workfow Container data in a program.
Hello I need to a access Workflow COntainer data for a particular workitem in a program. How to access these using Tables or standard function modules. Thanks in advance.
-
i have doubt regarding file adapter can a file adapter work dynamically? for example: we are configuring one file name and a path. whether multiple files can be taken from the path dynamically when using file adapter. Message was edited by: a
-
Does aol make a mac run slow?
I use aol for email. Recently my internet connection has been extremely slow and it coincides with having aol open. It takes me 10 minutes to write a shrot emai because the screen freezes and I get thespining coloured ball! However, even when I've qu
-
I can use Firefox for a page or two, then I realize the phone has frozen completely. This seems to happen especially if I've lauched Firefox through a link in another application. The Droid X battery is very hard for me to pop out, but I've had to do
-
Multiple Cubes refresh in parallel
Hi I have an analytical workspace where i have modelled a set of conformed dimensions and some dimensions specific to specific subject areas. There will be multiple cubes (Partitioned and some non partitioned) in this analytical workspace. Would like