Copying keystroke settings from one Logic to another?

Hi gang,
I'm on the road working in an unfamiliar studio. I have my laptop Logic close by, with Logic 8.02 installed. They've installed Logic 9.1.4 on their system. I've set my Logic up the way I want it, keystrokes and all. If I wanted to duplicate my setup on their system would that just be replacing their default preferences (plist) file (in Library/Preferences? with a copy of mine?
Or would this cause an issue because I'm one version earlier?
Or is there another way to do this perhaps?
All ears,
Ben

You're right. Completely misunderstood.
The OP should read the manual section on the match hue in color corrector 3-way. It allows you to pick a color in the white, mids, or blacks range from one image and inject that color into a corresponding color, like whites for instance, in another image. You can then copy and paste attributes for that filter to multiple clips.

Similar Messages

Can i copy my settings from one mac to another?

Hi
Since I had a problem with my Mac's drive that suddenly failed (I am able to read ONLY), I replaced the internal HD with my emergency HD that I had backedup a few months before. I would like to know if there's a way to copy my settings from one mac to another? Is there a specific folder for all apps or do I have to find out each and every single file for each app?
I need the settings for
System (view, font, color,)
Finder (view, etc)
iTunes (that include all library, playlists, etc),
Firefox (Bookmarks, settings & plug-ins),
Safari (Bookmarks, settings & plug-ins),
Address Book (contacts)
Thuderbird (emails accounts, contacts, passwords, etc)
Stickies (stickies on the dock - i have info on there unsaved)
Filezilla (FTP infos)
Would appreciate.
Thnx.

Prince Moe wrote:
Hi
Since I had a problem with my Mac's drive that suddenly failed (I am able to read ONLY), I replaced the internal HD with my emergency HD that I had backedup a few months before. I would like to know if there's a way to copy my settings from one mac to another? Is there a specific folder for all apps or do I have to find out each and every single file for each app?
I need the settings for
System (view, font, color,)
Finder (view, etc)
iTunes (that include all library, playlists, etc),
Firefox (Bookmarks, settings & plug-ins),
Safari (Bookmarks, settings & plug-ins),
Address Book (contacts)
Thuderbird (emails accounts, contacts, passwords, etc)
Stickies (stickies on the dock - i have info on there unsaved)
Filezilla (FTP infos)
Would appreciate.
Thnx.
All that info is found in your user/library folder, I just did a 60 machine rollout and copied all those settings from user/library, just be forewarned that if you upgrade software those setting will not take on the machine, for example Adobe CS 3,4 will not usable by CS5. let us know if you need more help. Also make sure you copy most of your preferences in the user/library/prefences folder.
Note: If you are using an identical backup with all apps and user settings, you can just copy all folders from user to your new home folder. Remember that only if the image or backup is identical to your production OS.

Copy Mail settings from one mac to another

I have a main desktop running snow leopard, but just acquired a powerbook g4 with Tiger on it. How can I transfer my my mail settings from my desktop to my powerbook? or can i?
Message was edited by: freak

Hi, I never tried going backwards with it, but the files/folders involved for 10.4 anyway are...
/Users/YourUserName/Library/Preferences/com.apple.mail.plist
Users/YourUserName/Library/Mail
Users/YourUserName/Library/Mail Downloads
(Could be a different folder here if you chose such in Mail Prefs)
For Address Book...
Files...
/Users/YourUserName/Library/Preferences/com.apple.AddressBook.plist
/Users/YourUserName/Library/Preferences/com.apple.AddressBook.abd.plist
Folders...
/Users/YourUserName/Library/Application Support/AddressBook/
/Users/YourUserName/Library/Caches/com.apple.AddressBook/

Can I copy EQ settings from one clip to another?

Is it possible? I opened the graphic EQ of one clip and moved the 10 levers. I want to be able to apply the same setting to several clips.
Thanks
Carlos San Miguel

Copy and paste effects. Unfortunately it's not selective.

Can I copy my iTunes from one Mac to another to a distant location?

I have 2 homes one in NYC and the other in upstate NY. I have multiple Macs at both locations all using Snow Leopard and the latest version of iTunes(9). I only have 1 iTunes library I maintain at the upstate location and have to bring my iPod to the NYC location to play my music. Can I not copy my iTunes library to the NYC location using Home Sharing or using some other method? I often forget to bring my iPod and am left without my music.

Prince Moe wrote:
Hi
Since I had a problem with my Mac's drive that suddenly failed (I am able to read ONLY), I replaced the internal HD with my emergency HD that I had backedup a few months before. I would like to know if there's a way to copy my settings from one mac to another? Is there a specific folder for all apps or do I have to find out each and every single file for each app?
I need the settings for
System (view, font, color,)
Finder (view, etc)
iTunes (that include all library, playlists, etc),
Firefox (Bookmarks, settings & plug-ins),
Safari (Bookmarks, settings & plug-ins),
Address Book (contacts)
Thuderbird (emails accounts, contacts, passwords, etc)
Stickies (stickies on the dock - i have info on there unsaved)
Filezilla (FTP infos)
Would appreciate.
Thnx.
All that info is found in your user/library folder, I just did a 60 machine rollout and copied all those settings from user/library, just be forewarned that if you upgrade software those setting will not take on the machine, for example Adobe CS 3,4 will not usable by CS5. let us know if you need more help. Also make sure you copy most of your preferences in the user/library/prefences folder.
Note: If you are using an identical backup with all apps and user settings, you can just copy all folders from user to your new home folder. Remember that only if the image or backup is identical to your production OS.

How do I copy the style from one control to another?

I need to programmatically copy the style from one graph to another. I'm currently using the importstyle and export style functions but I'd like to avoid that since: 1) I'm creating >100 of the same graphs in a scrolling window and execution time is a concern, and 2) it makes it harder to redistribute the application, and 3) you shouldn't have to import/export from disk just to copy a graph style.
I noticed the copy constructor was disabled so you can't just create a new one from the original. I suppose I could iterate through all the styles and transfer them from the master graph to all the copies but is there an easier way to do that? If not, is there some sample code for that?
I'm using MStudio 7.0 for C
++.
Thanks,
-Bob

One way that you could do this would be to create a helper method that configures your graph rather than configuring it at design-time, then use that helper method to apply the settings to the new graphs that you create. However, this would only work if you wanted all graphs to be configured exactly the same way - this would not work if the settings of your master graph are changing at run-time and you want the new graphs to be configured with the current settings of the master graph.
Another approach is to query each control for IPersistPropertyBag, create an IPropertyBag, pass the IPropertyBag to the master graph's IPersistPropertyBag:ave, then pass the IPropertyBag to the new graph's IPersistPropertyBag::Load implementation. I'm not aware of any implementations of IPropertyBag that are readily available for use in applications, so the tricky part is creating the IPropertyBag. Below is a very simple implementation of IPropertyBag that should be enough to get the job done for this example. First, add this to your stdafx.h:
#include <atlbase.h>
CComModule _Module;
#include <atlcom.h>
#include <atlcoll.h>
Here's the simple IPropertyBag implementation:
class ATL_NO_VTABLE CSimplePropertyBag :
public CComObjectRootEx<CComSingleThreadModel>,
public IPropertyBag
private:
CAtlMap<CComBSTR, CComVariant> m_propertyMap;
public:
BEGIN_COM_MAP(CSimplePropertyBag)
COM_INTERFACE_ENTRY(IPropertyBag)
END_COM_MAP()
STDMETHODIMP Read(LPCOLESTR pszPropName, VARIANT* pVar, IErrorLog* pErrorLog)
HRESULT hr = E_FAIL;
if ((pszPropName == NULL) || (pVar == NULL))
hr = E_POINTER;
else
if (SUCCEEDED(::VariantClear(pVar)))
CComBSTR key = pszPropName;
CComVariant value;
if (!m_propertyMap.Lookup(key, value))
hr = E_INVALIDARG;
else
if (SUCCEEDED(::VariantCopy(pVar, &value)))
hr = S_OK;
return hr;
STDMETHODIMP Write(LPCOLESTR pszPropName, VARIANT* pVar)
HRESULT hr = E_FAIL;
if ((pszPropName == NULL) || (pVar == NULL))
hr = E_POINTER;
else
m_propertyMap.SetAt(pszPropName, *pVar);
hr = S_OK;
return hr;
Once you have a way to create an implementation of IPropertyBag, you can use IPropertyBag and IPersistPropertyBag to copy the settings from one control to another like this:
void CopyGraphStyle(CNiGraph& source, CNiGraph& target)
LPUNKNOWN pSourceUnknown = source.GetControlUnknown();
LPUNKNOWN pTargetUnknown = target.GetControlUnknown();
if ((pSourceUnknown != NULL) && (pTargetUnknown != NULL))
CComQIPtr<IPersistPropertyBag> pSourcePersist(pSourceUnknown);
CComQIPtr<IPersistPropertyBag> pTargetPersist(pTargetUnknown);
if ((pSourcePersist != NULL) && (pTargetPersist != NULL))
CComObject<CSimplePropertyBag>* pPropertyBag = 0;
CComObject<CSimplePropertyBag>::CreateInstance(&pPropertyBag);
if (pPropertyBag != NULL)
CComQIPtr<IPropertyBag> spPropertyBag(pPropertyBag);
if (spPropertyBag != NULL)
if (SUCCEEDED(pSourcePersist->Save(spPropertyBag, FALSE, TRUE)))
pTargetPersist->Load(spPropertyBag, NULL);
(Note that "CreateInstan ce" above should be CreateInstance - a space gets added for some unknown reason after I click Submit.)
Then you can use this CopyGraphStyle method to copy the settings of the master graph to the new graph. Hope this helps.
- Elton

Can you copy custom To Do List settings from one project to another?

Using RH9. We created a number of To Do List entries for one of our Robohelp projects that we now want to use in all of our RH projects (File > Project Settings > Manage To Do List for Robohelp Project). Is it possible to copy these entries from one project to another? Or do we need to re-create the list of To Do tasks for each one of our 20+ projects?

Hi there
The "To Do" list items appear to be stored directly in the ProjectName.XPJ file. So theoretically it would be possible to copy them by opening one XPJ using Windows Notepad, copying them, then opening the target XPJ and pasting. However, this will likely cause a disparity between the XPJ and the .CPD. So before actually opening the project where you are copying them into, you would want to close the project and delete the CPD. Then modify the XPJ and re-open the project. A fresh CPD should then be baked up and things should be in sync.
You might also want to submit a Wish Form to ask for an easier way to transfer custom lists. (link is always in my sig)
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Can one 'copy' Shadow\Stroke settings from one graphic to another?

I'm always juggling hundreds of stills. I'd love to be able to just copy the Shadow settings from one still to another. Or to be able to 'lock' the setting so that they are all they same when applied to a set of stills.
Is something possible here?
Ben

Ben Low wrote:
I'm always juggling hundreds of stills. I'd love to be able to just copy the Shadow settings from one still to another. Or to be able to 'lock' the setting so that they are all they same when applied to a set of stills.
Is something possible here?
Yes:
- select your shape you want to use as a "style model"
- <pre>Format > Copy Graphic Style</pre>
- select all the shapes you want to apply the same graphical style to
- <pre>Format > Paste Graphic Style</pre>
You can also adopt it as a default graphical style forever:
- select your shape you want to use as a "style model"
- <pre>Format > Advanced > Define Default Shape Style</pre>
dan

Copy lightroom 4.4 "default camera settings" from one computer to another?

Is it possible to copy my lightroom 4.4 "default camera settings" from one computer to another?

Quote "Are you saying that the settings are stored in the catalog."
I believe it is stored in the Preferences file. You can use presets to do the same thing as adjusting the "default develop settings", they are applied differently.
One is set in the Lightroom "Preferences" and one is applied by selecting a particular preset at import. I have not tried but since you can delete the preference file and Lightroom will rebuild one I am pretty sure you should be able to copy one from one computer to another.
Also you need to be aware that Lightroom applies noise reduction by default to your specific camera model and to the ISO setting. It does not display the actual settings.

How to transfer user settings from one account to another (on the same Mac)

I'd like to create separate user accounts for "work" and "play" (so that I can do things like have separate address books, etc...). However, I already have LOTS of personalized settings (trackpad behavior, login items, etc) that I'd like to keep the same between the two accounts.
Is there a way to transfer all of the user settings from one account to another?

You'll need to copy your /Home/Library folder. Make sure you back up first before doing the following. Log out of both your Work and Play accounts. Log in to a third account with administrator privileges. Assuming you are copying from the account called "work" to the account called "play", enter the following in Terminal:
sudo rm -rf ~play/Library (this deletes Play's Library folder.)
sudo cp -R ~work/Library ~play/Library (this copies Work's Library folder to Play's folder.)
sudo chown -R play ~play/Library (this fixes permissions of Play's new Library folder.)

How do you move Compressor 3.05 settings from one Mac to another?

How do you move settings from one Mac to another?
I have Compressor 3.05 installed on two Intel Macs: a MacPro tower and a MacBook Aluminum. I created a new setting on the MacBook, and can see it in Library -> App Support -> Compressor as "<name>.setting" Then I moved to the Mac Pro for speed and created a few more settings. I copied these settings from the Mac Pro libary and put them in the MacBook library; restarted Compressor on the MacBook but still cannot see those presets from within Compressor. I hate to re-create all those settings, but I do move between both computers depending on what I am doing.
What am I missing? Thanks.

To copy single settings.
1. Drag & Drop your setting from the Compressor Settings window to i.e. the desktop
2. Copy .setting file to an other Mac
3. Drag & Drop the .setting file(s) over to the Settings window in Compressor
To copy settings groups (folders)
1. Go to */Users/yourusername/Library/Application Support/Compressor*
2. Copy the settings group folder you want to your i.e. the desktop
3. Make sure Compressor is not open on the other Mac
4. Copy the settings group folder to the same location on the other Mac
5. Open Compressor
Hope this helps
Message was edited by: jeffd55

How to transfer printer settings from one Mac to another (both OSX)?

Hello, I have not found a detailed description on how to transfer printer settings from one Mac to another.
My issue is that I have a Mac G5 with 3 different settings saved as "presets" for the same printer. This works great, since the posters I print (on the large format printer) need different margins and different paper at times.
This G5 is basically retired and only used for printing. G5 has OSX 10.3.9
I have a MacPro as its replacement (OSX 10.4.11).
The MacPro has all my apps and other settings setup to my liking.
I found several links via Google saying copy this folder or directory, but I am not sure I did it correctly. I don't see the "presets".
I tried launching the Migration Assistant (I hope that's the correct name), but was concerned the settings on the new MacPro would be overwritten with ALL the old stuff on the older G5. I did not start the transfer process because of this.
If someone would list the steps needed to accomplish the transfer of printer settings or advise if this is possible, then I would be very grateful! The previous user of the G5 I am using was a "Genius" and I don't know how he created these "preset" choices.
Thanks!

Hi SCChelpdesk, and a warm welcome to the forums!
I found several links via Google saying copy this folder or directory, but I am not sure I did it correctly. I don't see the "presets".
This is the File that holds that info on Tiger, not certain on Panther...
/Users/YourUserName/Library/Preferences/com.apple.print.custompresets.plist
After moving, you very well might have to change the Owner's Permissions within Get Info window, then log out/in.
I tried launching the Migration Assistant (I hope that's the correct name), but was concerned the settings on the new MacPro would be overwritten with ALL the old stuff on the older G5. I did not start the transfer process because of this.
MA would transfer the info, but/and, if the user that had that info had the same Shortname as on the new one, it'll demand you give it a new Shortname to use... but then those settings would be transferred to that new user on the new machine. I think the 1st one will work though.
The previous user of the G5 I am using was a "Genius" and I don't know how he created these "preset" choices.
We can go through that way if you like... not all that hard.

Error while copying GL Accounts from One Client to another client

Hi,
We are trying to copy GL accounts created in one client to another client (Company Code is same in both the clients). First we executed FS15 (send) and a file was created on the server. With the help of BASIS team we checked that file and it contained the required values. However, when we are doing FS16 (receive) we are getting following OK messages:
File /usr/sap/DEV/SYS/global/FBISABC is being checked
Session 1 session name RFBISA20 : No terminations have been found
However, at the same time we are getting following error message:
File name FI_COPY_COMPANY_CODE_DATA_FOR_GENERAL_LEDGER_0X is unknown
Message no. SG001
Diagnosis
No entry was found in the conversion table for the logical file name FI_COPY_COMPANY_CODE_DATA_FOR_GENERAL_LEDGER_0X.
Procedure
Add an entry to the conversion table for the logical file name. Maintain the conversion table with the transaction SM30.
Can someone please advice is there something wrong that we are doing for copying GL accounts from one client to another client.
Thanks,
Sanjay

Dear Sanjay,
Did you check the batch-input? SM35
It could have happend that there was a mistake in the batch-input data and that the destination file has not been written. If this has not been written it could not be found. (I.E. you tried to transport G/L Accounts with deletion flags but did activate the checkbox "Transfer deletion ****").
There is another point: Did you activate the box "Datei nur prüfen" (English: Check file only)? If this box is activated the programm will check if the batch-input-file will be written without mistakes but it will not write the file. Only if the checkbox is not activated the batch-input-file will be written. (the same with FS16).
Kind regards
Maike
Edited by: Maike Nemeyer on Dec 1, 2011 8:52 AM
Edited by: Maike Nemeyer on Dec 1, 2011 11:45 AM

How can I migrate my junk-mail settings from one Mac to another?

I would like to move my junk mail settings from one Mac to another. I found this article (https://kb.siteground.com/how_to_synchronize_the_junk_email_settings_in_mac_mail /), but can't locate the file indicated in the article, so I suspect that the article is out of date (though it's not dated).
Both machines - MacOS 10.9.5; Mail 7.3.
Any insights much appreciated!
Best,
Doug

Make your user library visible and see if you can find it.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library.

Error while copying a page from one application to another application

Hi All
I am using Oracle Apex 4.0
I getting the error ORA-06502 Pl/Sql Numeric error character string buffer too small when i copying a page from one application to another application.
Thanks & Regards
Srikkanth.M

I'm having the same issue. How did you solve this?

Copying keystroke settings from one Logic to another?

Similar Messages

Maybe you are looking for