Copying Mapping from existing multple mapping to One to one mapping

Hi Experts,
I am having a scenario in which I am doing one to three mapping.
I have a input file and I am tarnsforming it to three files HEADER, DETAIl and FOOTER.
I am using only one mapping for it and it is completed.
Now I need to do one to one mapping for each HEADER, DETAIL and FOOTer.
Is there any way that I can copy my mapping from the existing one and do the one to one mapping.
Regards
Pradeep

Hi,
I guess it should be possible to copy your mapping (3 times) and remove the parts that you don't need.
The problem (in PI 7.0) is that if you have more than one message at the target side and reduce it to one message your field mappings are lost.
You can avoid this if you set the occurence of your target message to 0.. unbounded.
If you don't want to do this you could copy for all fields the last field before the target field (right click on field -> copy) and paste it in your new mapping (this will copy your complete mapping structure).
Regards
Patrick
Edited by: Patrick Koehnen on Jan 12, 2009 11:48 AM

Similar Messages

How do I copy everything from my old Iphone to my new one?

How do I copy everything from my old iphone to my new one?

Refer to these articles:
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
iTunes: Back up your iTunes library by copying to an external hard drive
http://support.apple.com/kb/HT1751

How can I copy music from my old ipod to my new one??

How can I copy music from my old ipod to my new one?? They are not on my computer because it is also new, and the old one is not working anymore. Is there a way to do this without having to import the music from the cds again??

Check this out:
Getting Music from your iPod to your Computer 3rd party options
I hope this helps!

I want to copy songs from my old ipad to a new one. laptop used in configuring the old ipad crashed and cant be used again.

i want to copy songs from my old ipad to a new one. laptop used in configuring the old ipad crashed and cant be used again

You may be able to re download iTunes purchases for free directly on the new iPad.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Note: Previously purchased music is only available through iTunes in the Cloud in Australia, Canada, Cypress, France, Ireland, Luxembourg, Malta, Mexico, New Zealand, Spain, the United Kingdom, and the United States. Previously purchased TV shows are only available through iTunes in the Cloud in the United States.

Hi there. Can someone please help me with copying photos from my old iPad to my new one? Thanks.

Hi there. Can someone please help me with copying photos from my old iPad to my new ipad2? Thanks.

If you have a pc, when you plug your iPad in you should see the windows pop up window offering to backup the photos. Do that and it will save all your photos and videos to your computer where you can then sync them back to your new one.
If the pop up doesn't come up, double click on my computer and navigate your way to the iPad. Double cick on it an d navigate to the DCIM folder. Drag your photos and videos to your pc, then sync them back onto your iPad.

I can't pull music from existing playlists to create a new one with the new update.

I can't find a way to pull music from existing playlists when I create a new one. I make new playlists everyday with my job and this makes it very time consuming for me!

Unfortunately, you can't. The primary address for your iCloud account must be a non-Apple email account. The only exception to this is for former MobileMe subscribers who migrated to iCloud when MobileMe closed, which was 18 months ago.

How to change the name of the char when we copy macro from existed macro?

Hello Experts,
I have copied planning book and macro from one planning area to another planning area. all the planning books/Macros are copied. now i want to change of the characteristics as per the new planning area in the MACRO?.
How do i change the char in the newly copied planning macro. i have changed kfs and char in the planning book but i am notseeing any option in the macro.
can you pls. help. thanks in advance.
VACHAN

You dont really have to change the characteristics anywhere in the macros
When the macros run they get executed for the characteristics of the current planning area.
However if there is any macro which may be reading a value of the characteristic by hardcoding the name of the characteristic, you would need to replace the old char name with the new one..

Need help with Resource Mapping from Application Deployment to VC:virtualMachine

Hi,
I've built a number of vCO Workflows and hooked them up to Resource Actions in vRA. However, the Workflows I've built all take a VC:VirtualMachine as the input and therefore,they only "hookup" to VMs in the Machines list in the Items tab in vRA. Ideally, I want these actions to hookup to the Application Deployments in vRA since that is what my users are deploying - the VM that the App rides on is somewhat secondary. Plus, it's cumbersome for them to find the VM that corresponds to the App they want to run the action on.
So, I looked into creating a new Resource Mapping, thinking I could map an Application Deployment to a VC:VirtualMachine so that I could create an Action for the Application. I was able to create a mapping from Application Deployment to VC:VM using the Map to VC:VM existing workflow and I could add that to the Actions menu for the Application Deployment but if I try to run it, it fails. I kind of expected this since I think the Map to VC:VM is expecting an input of IaaS VC:VM to map to vCO VC:VM. I think what I need to do is write a Workflow that will take in the Application Deployment "object" and find the VC:VM inside it but I don't know how to find out the structure of an Application Deployment such that I could parse it and get the VM.
Does this make sense? Am I going about this the right way? Thanks for any help,
Tom

Hi,
I've built a number of vCO Workflows and hooked them up to Resource Actions in vRA. However, the Workflows I've built all take a VC:VirtualMachine as the input and therefore,they only "hookup" to VMs in the Machines list in the Items tab in vRA. Ideally, I want these actions to hookup to the Application Deployments in vRA since that is what my users are deploying - the VM that the App rides on is somewhat secondary. Plus, it's cumbersome for them to find the VM that corresponds to the App they want to run the action on.
So, I looked into creating a new Resource Mapping, thinking I could map an Application Deployment to a VC:VirtualMachine so that I could create an Action for the Application. I was able to create a mapping from Application Deployment to VC:VM using the Map to VC:VM existing workflow and I could add that to the Actions menu for the Application Deployment but if I try to run it, it fails. I kind of expected this since I think the Map to VC:VM is expecting an input of IaaS VC:VM to map to vCO VC:VM. I think what I need to do is write a Workflow that will take in the Application Deployment "object" and find the VC:VM inside it but I don't know how to find out the structure of an Application Deployment such that I could parse it and get the VM.
Does this make sense? Am I going about this the right way? Thanks for any help,
Tom

Copy-Paste From Other Apps (like PPT 2004) Into CS5 Broken ? - OS 10.6.3

Hi,
New Mac, so to avoid problems went for the new post-Snow Leopard Photoshop CS5. Oops.
Copy-Paste From Other Apps Into CS5
Pasting images/photos from Powerpoint 2004 to CS5, I experienced the exact problem posted slightly off topic by james norrington in the thread "CS5 does not let me copy & paste file names." It was not answered and is quoted here:
---"I am using CS5 Photoshop and Office 2004 on 10.6.3. I was using 10.4 until a few weeks ago and it worked and still works with other macs in the office using CS4. I can copy and paste from powerpoint but it cuts the pictures in half and does not know what the res. of the image is. Also when I go from photoshop to powerpoint the image res. is also not preserved."---
Besides that, I also found copy-paste from a digital camera photo.jpg from Preview to CS5 doesn't respect the resolution either. Directly opening the photo into PS CS5, fine.
From the earliest PS, always was able to copy any image to clipboard, have a new document dialog box come up pre-filled with correct original WxH pixels, original resolution, color mode, etc., and just paste into the new document - perfect fit (even the oddball PPT 576 ppi). Now a shift and cut-off. Don't have PPT 2008 to test pasting from there.
I have also found that a similar but less severe image cut off happens when copy-paste from PPT -> Preview, or -> TextEdit, or -> drag and drop picture clipping.
Opening Image File in CS5
Even an original 300 dpi tiff file wrongly went to 72 ppi etc. when opened directly into CS5. Converted the file to a jpeg in Preview - that jpeg file could be opened into CS5 correctly, reconverted the jpeg to TIFF in Preview, still opened OK (not counting loss of image quality). Still couldn't copy paste from either document into CS5 correctly. One difference I noticed in the converted files was that more information was available in the Preview file info. Maybe that made the difference in opening the file correctly.
I'd welcome any suggestions. Thanks.
---detail of tiff file ---
original
     GENERAL
     Color Model: RGB
     Depth: 8
     DPI Height: 300
     DPI Width: 300
     Pixel Height: 1033
     Pixel Width: 1315
     TIFF
     Compression: LZW
     Photometric Interpretation: RGB
     Software: Image-Pro Plus
     Y Resolution: 300
After conversion to jpeg in Preview"
GENERAL
     Color Model: RGB
     Depth: 8
     DPI Height: 300
     DPI Width: 300
     Orientation: 1 (Normal)
     Pixel Height: 1033
     Pixel Width: 1315
EXIF
     Pixel X Dimension: 1315
     Pixel Y Dimension: 1033
TIFF
     Color Model: RGB
     Depth: 8
     DPI Height: 300
     DPI Width: 300
     Orientation: 1 (Normal)
     Pixel Height: 1033
     Pixel Width: 1315
----END---

Thanks to Chris for the explanation of the dueling clipboards.
It's still frustrating, but since I still have a CS2 license from the dead G4 the current Mac replaced, I can try that (wonder if they can coexist), or maybe I could use an older Mac for this particular situation.
As for the .tif file, it was generated by a Mac OS 8.5 era image capture program that we are forced to use, and the analysis was that the app does not properly encode the TIFF tags to acceptable standards. Preview 5.0.2 just guessed right from the little information that was included - but it didn't work when tried with Preview 3.0.9 on an OS 10.4 Mac. So this was a unique situation.

Copying tunes from my iPod to my computer.

I recently built a new computer, and therefore the songs that are on my iPod are not on my computer. Is there a way to copy songs from my iPod (not the library!) to a folder on my computer?
Thanks.
Windows XP
Windows XP

If you are using iTunes version 7 or later, then you can transfer purchased iTunes store music from the iPod to an authorized computer by using the "file/transfer purchases from iPod" menu. Note that the maximum of 5 authorized computers applies here.
For all other non purchased music (your own CDs etc) try this method which works on some Windows PCs.
Enable your iPod for disk use.
See: iPod Disk Use.
Open iTunes and select edit/preferences/advanced/general. Put a check mark in the box marked "copy files to iTunes music folder when adding to library" and also "keep iTunes music folder organized", then click 'ok'.
Connect the iPod whilst holding down the shift/ctrl keys to prevent any auto sync, and if you see the dialogue window asking if you want to sync to this itunes library, click 'no'.
Then go to file/add folder, open 'my computer', select your iPod and click 'ok'.
The music files should transfer to your iTunes.
If this doesn't work (and it may not because officially it's not supposed to), check out the instructions/suggestions here.
Music from iPod to computer (using option 2). This a manual method using "hidden folders" and although it works, it can be messy.
Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
One of the most recommended is Yamipod. This is a free program that transfers music and playlists etc from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Another free program is Pod Player.

Copy songs from iPod to new computer

How can I copy my songs from my iPod to the iTunes library on my new computer?

For iTunes version 7 or later, then you can transfer purchased iTunes store music from the iPod to an authorized computer by using the "file/transfer purchases from iPod" menu. Note that the maximum of 5 authorized computers applies here.
Find out how to do that here.
How to copy iTunes purchases from an iPod to a computer.
For all other non purchased content (your own CDs etc) try this method which works on some Windows PCs.
Enable your iPod for disk use.
See: iPod Disk Use.
Open iTunes and select edit/preferences/advanced/general. Put a check mark in the box marked "copy files to iTunes music folder when adding to library" and also "keep iTunes music folder organized", then click 'ok'.
Connect the iPod whilst holding down the shift/ctrl keys to prevent any auto sync, and if you see the dialogue window asking if you want to sync to this itunes library, click 'no'.
Then go to file/add folder, open 'my computer', select your iPod and click 'ok'.
The music files should transfer to your iTunes.
If this doesn't work (and it may not because officially it's not supposed to), check out the instructions/suggestions here.
Music from iPod to computer (using option 2). This a manual method using "hidden folders" and although it works, it is a little more involved than other methods.
Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
One of the most recommended is Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Another free program is Pod Player.
SharePod is also freeware.
If you want to recover just the structure of playlists from the iPod (and not the actual song files themselves), there's iRepo for Windows. which I understand has this feature along with all the standard features for these programs.
iPodRip also has the feature enabling you to reconstruct playlists.

Trying to find a way to copy songs from iPod into Library

My computer crashed and I had to reformat my computer. I lost all music files to include iTunes. I still have all of my music on my Nano and have since reinstalled iTunes.
Now I can't seem to find how to copy the songs from my Nano into my Library in iTunes. Please help!

First of all try this method which works on some Windows PCs..
Open iTunes and select edit/preferences/advanced/general. Put a check mark in the box marked "copy files to iTunes music folder when adding to library" and also "keep iTunes music folder organized", then click 'ok'.
Connect the iPod whilst holding down the shift/ctrl keys to prevent any auto sync, and if you see the dialogue window asking if you want to sync to this itunes library, click 'no'.
Then go to file/add folder, open 'my computer', select your iPod and click 'ok'.
The music files should transfer to your iTunes.
If this doesn't work (and it may not because officially it's not supposed to), check out the instructions/suggestions here.
Music from iPod to computer (using option 2). This a manual method using "hidden folders" and although it works, it can be messy.
Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
One of the most recommended is Yamipod. This is a free program that transfers music and playlists etc from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
There is also CopyPod. This does preserve ratings/playcounts etc if those are important to you but this program is not free.
If you are using iTunes version 7 or later, then you can transfer purchased iTunes store music from the iPod to an authorized computer by using the "file/transfer purchases from iPod" menu. Note that the maximum of 5 authorized computers applies here.

Copy music from iPod to new PC

I have a new PC (old PC was stolen). I would like to copy music from my 30gb iPod classic to the new PC. I have followed all of the instructions for restoring the music, but when I connect my iPod and search from "My Computer", the only folders visible are: Calendars, Contacts, Notes, and Photos. There is no iTunes folder. Any idea what is going on?

For iTunes version 7 or later, then you can transfer purchased iTunes store music from the iPod to an authorized computer by using the "file/transfer purchases from iPod" menu. Note that the maximum of 5 authorized computers applies here.
Find out how to do that here.
How to copy iTunes purchases from an iPod or iPhone to a computer.
For all other non purchased content (your own CDs etc) try this method which works on some Windows PCs.
Enable your iPod for disk use.
See: iPod Disk Use.
Open iTunes and select edit/preferences/advanced/general. Put a check mark in the box marked "copy files to iTunes music folder when adding to library" and also "keep iTunes music folder organized", then click 'ok'.
Connect the iPod whilst holding down the shift/ctrl keys to prevent any auto sync, and if you see the dialogue window asking if you want to sync to this itunes library, click 'no'.
Then go to file/add folder, open 'my computer', select your iPod and click 'ok'.
The music files should transfer to your iTunes.
If this doesn't work (and it may not because officially it's not supposed to), check out the instructions/suggestions here.
Music from iPod to computer (using option 2). This a manual method using "hidden folders" and although it works, it is a little more involved than other methods.
Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
One of the most recommended is Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Another free program is Pod Player.
SharePod is also freeware.
If you want to recover just the structure of playlists from the iPod (and not the actual song files themselves), there's iRepo for Windows. which I understand has this feature along with all the standard features for these programs.
iPodRip also has the feature enabling you to reconstruct playlists.
There is also CopyTrans. This does preserve ratings/playcounts etc if those are important to you but this program is not free. It also supports video transfer.

Can I copy library from Ipod to my hard drive ?

I lost most of my library and all of my playlists from ITunes. All of the music is still in my hard drives and still on my IPod. Can I copy what's on my Ipod back into my ITunes library ? If so, how ? I've got a 80 gig, 5th gen, video, and can't stand the possibility of losing all of the playlists. The computer I want to copy this data to is the only computer that was ever used with this IPod.
My last post went unanswered.

For iTunes version 7 or later, then you can transfer purchased iTunes store music from the iPod to an authorized computer by using the "file/transfer purchases from iPod" menu. Note that the maximum of 5 authorized computers applies here.
Find out how to do that here.
How to copy iTunes purchases from an iPod or iPhone to a computer.
For all other non purchased content (your own CDs etc) try this method which works on some Windows PCs.
Enable your iPod for disk use.
See: iPod Disk Use.
Open iTunes and select edit/preferences/advanced/general. Put a check mark in the box marked "copy files to iTunes music folder when adding to library" and also "keep iTunes music folder organized", then click 'ok'.
Connect the iPod whilst holding down the shift/ctrl keys to prevent any auto sync, and if you see the dialogue window asking if you want to sync to this itunes library, click 'no'.
Then go to file/add folder, open 'my computer', select your iPod and click 'ok'.
The music files should transfer to your iTunes.
If this doesn't work (and it may not because officially it's not supposed to), check out the instructions/suggestions here.
Music from iPod to computer (using option 2). This a manual method using "hidden folders" and although it works, it is a little more involved than other methods.
Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
One of the most recommended is Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Other free programs are Pod Player, SharePod and Floola.
If you want to recover just the structure of playlists from the iPod (and not the actual song files themselves), there's iRepo for Windows. which I understand has this feature along with all the standard features for these programs.
iPodRip also has the feature enabling you to reconstruct playlists.
There is also CopyTrans. This does preserve ratings/playcounts etc if those are important to you but this program is not free. It also supports video transfer.

Copy a mapping from one project to another project in same reepository.

Hi All,
I am using OWB 10GR2. I have two projects in this repository called dev_project and test_project. after completion of mappings development in dev_project, i want to move the mapping from dev_project to test_project. I was able to copy the mapping from dev_project to test_project.
However, when i open the mapping in test_project project, I was able to see all mapping operators like sources, targets and all other operators. But filter operators, join operators and aggregator operators doesn't have its properties( means there are no filter condidtion, join condition).
Please help me how to take those filter and join conditions also from dev_project to test_project.
Thanks,
pv

There is a OWB bug 8267898 described as:
COPYING MAPPING BETWEEN PROJECTS IN OWB LOOSES ALL THE OPERATOR PROPERTIES
Try to apply patch:
Patch 8289030 - PSE FOR BASE BUG 8267898 ON TOP OF 10.2.0.4 FOR WINDOWS 32BIT (215)

Copying Mapping from existing multple mapping to One to one mapping

Similar Messages

Maybe you are looking for