Copying MBCZ into ZMBCZ drill down is empty

Hi,
I am coping MBCZ into ZMBCZ
at that time , the drill down is empty, so while clicking swith-drill down button ,
I am getting empty pop-up screen. so i can't able to select option wise.
Kindly guide me to close this issue.
Thanks & Regards.
Balajee.J

Hi Sunil,
Thanks for the reply. And yes, the message regarding FAGLB03 is informational only so this is fine if I were to go to FS10N directly to look up a specific account balance. But when I drill down from my report, I only get to the selection screen of FAGLB03/FS10N and the account number showing on that selection screen is not the account number on which I drill down on from the report.
In our PRD or QAS client, when I drill down from a line item in the report, it immediately takes me to the line item display where it listed all the documents posted to that specific account, so I did not have to reinput the account number and re-execute FS10N.
I tried assigning FBL3N in the report interface, but that did not work either. The report drilldown still takes me to the selection screen of FAGLB03.
rgds,
Lanny

Similar Messages

REPORT PAINTER DRILL DOWN REPORT

Hi,
i need to develop report painter report with drill down for cost elments and month wise
out should be cost elements and all months
Please suggest how to use drill down
Thanks and Regards
RAVi

Along these same lines. I have a user that cannot drill down into a drill down report. Let me clarify. This report does have drill down capability as some people can drill down into it but others cannot. If a user has authorization to run a report via GRR3. When they click on an item to drill down they do not get an authorization error statement, all they get is a statment that says "list contains no data". Any ideas why some can drill down and some can't? Thanks
Mark

How to get the output data of Standard drill down report into z-program?

HI every one,
        I want to get the output data of drill down report into z-program.
       Actually,if the output is only one, I can get into z-program,
      But, Here the report consists 3 alv outputs. when double clicking function happens, it will direct to another alv output.
    Those, all the outputs of report i want to get into z-program.
PLease , give reply as early as possible.
Thank u in advance,
karthik

HI,
When i download,only one output i will get.
But,if i double-click the particular record it will show another output. I want that output also.
Like that,when i double-click particular record, it will show some other alv ouput based on record,
i wanted all those outputs.
If i copy the code, whether i face any problems?

Can I copy and paste a drop down list into another field?

Can I copy and paste a drop down list into another field?

You don't have to create a PDF, but it would be helpful to know what, exactly, you want to do with the ppt.
You can export as a PDF which will keep vectors and text as PostScript (crisp) elements.
You can also Save As from ppt in a variety of formats such as PNG or TIFF.
These rasterize all the vectors and text, but are very useful if you're laying out a miniature gallery of the powerpoint presentation.
However, if you want to make the InDesign file a replica of the ppt slides for print, PDF is probably the best way to go.

Copy/export a drill down report created by CXR0 in PRD

Hi Gurus,
I am trying to copy/export a drill down report created by CXR0 in PRD ( can not move transport from PRD to QAC, transport doesnot allow ) to QAC and DEV, is there any other way to export / import , download /upload option to transfer report or form from the drill down report.
Please help

Hi Amit,
I think you are right, I got same type of information from other basis source that drill down report cannot be exported or imported, only way to move by transport.
Still I wait for your confirmation,
Al Mamun

Drill down into a report

Hi!
I've been working on a report to be able to drill down into another "detailed" one, and I was able to do it but not exactly the way i needed.
I created an action link for the column values, but my problem is that for EVERY value, i always drill into the same exact report, and my idea is to drill into the same report for all of them, but with different parameters for each one
Example:
Sales representative revenue
John 230K
Mark 100K
Martin 500K
I've set a drill down for the revenue column, but all 3 values are obviously drilling into the same exact report, and I want to set it in a way I can tell the sub report "give me the detail report but only for the corresponding sales representative"
If i click on 230K, I want to see the "detailed report" only for John's oppties. If i click on 500K, I want to see the "detailed report" only for Martin's oppties. And so on...
That's the whole deal. I don't know how to do that.
Thanks for your help,
Martin

Hi, thanks for your answer
I'm navigating from a master to a detailed report, and i have already set the attribute as "is prompted" but Its not enough. Let me try to explain why
Lets say I have this example report:
Prompts: Primary position
Table:
Primary position | forecast
John | 768687
Paul | 200000
George | 923882
then I drill down on "Paul" to the next position level, so the report changes to something like this:
Primary position | secondary position | forecast
Paul | Jane | 100000
Paul | Martin | 100000
So, now... I want to drill into Martin's 100.000 forecast (drill into a detailed report) and despite I have the primary position set as "is prompted", I have no prompts for second, third, or n-position... So If I drill down from martin's 100000 forecast, I will only be able to pass the primary to the detailed report, and It will only be able to show Paul's 200000 forecast details
I want the detailed report to pull Paul for primary, Martin for secondary, and show only the detailed report for that 100000 forecast value
That's the issue
I hope I was clear enough
Thanks,
Martin

While drill down a char system going into dump

Hi,
We have changed 0COUNTRY as a navigation attr to the 0COMPANY and added to the Muti provider.
In query level initially for 0COMPANY data is paulating while trying to drill down 0COUNTRY with 0COMPANY then system is going into dump.
Thes system message;
The current application triggered a termination with a short dump.
An error occurred while communicating with the BI server.
As a result of this error, the system has been disconnected from the BI server.
Detailed description
can any one let me know the reason.
Regards,
Sharma.

Hi,
The problem is resolved in my self.
Regards,
Sharma

Drill-down into AWR reports

Hi experts,
any can help me in this topic Drill-down into AWR reports.

A typical AWR report - produced in html format- includes its main categories(for example Top 5 timed events) hyperlinked. By clicking on each one , you can navigate to a thorough analysis of all db parameters regarding it......
Anyway....Can you more specific of what exactly do you want...?????
Greetings...
Sim

JDeveloper 2.0: Drilling down into a class

I can't drill down into a class by double-clicking on an object
node in the Structure pane. The Content pane should display the
source code for the ancestor class of that particular object.
Thanks in advance!
null

Hi
The doc for 'oracle.jdeveloper.servlet' can be found in the
JDeveloper Help System.
Launch the help system
and in the contents tab double click on 'JDeveloper 2.0 Reference
Documentation' book icon.
In the right hand frame select 'Oracle JBO Reference' link and
you can drill down further.
best regards
raghu
John Ritz (guest) wrote:
: Were can I find more detailed documentation for the classes in
: the 'oracle.*' packages? I'm specifically interested in how to
: use the classes in 'oracle.jdeveloper.servlet.*'
: and 'oracle.jdeveloper.html.*' packages. Some classes have a
: JavaDoc file but with little content, others have no
: documentation at all. Also Is the source code available for the
: classes in the oracle packages? Thanks for your help.
null

Drill- Down - XD03 into Another SAP System

I want to Drill-Down from Customer Master (XD03) to Customer Sales Area Data. Customer Master Information is in One SAP server and sales area data is maintained in another SAP server.
IF user click on extras->Sales area-Customer Sales Area then system should fetch sales are from another system and displayed to user if user click on particular sales area data then system should show sales are data of a customer.
I done some R&D to achieve this using enhancement spots but still I am not able to find exact enhancement point. If anybody has any IDEA please share.
I successfully managed to drill-down from FI, SD, and MM into another system using enhancement framework without modifying standard. I want similar solution for Customer master.

check this badi CUSTOMER_ADD_DATA_CS ?

Drill down into va22

It's a drill down into va22, I've done it the standard way, but
it fails:
set parameter id 'AUN' field t_tab-vbeln.
call transaction 'VA22' and skip first screen.
The set parameter executes okay, and if you F1, F9 on the
quotation field in va22 it says the parameter id is AUN.
However, it doesnt appear that it is AUN. If you set that
parameter id to '123' and then go to va22, it's still got the
last quote you used. If you then go to VA03, it's got '123' in
the order field.
I can only assume that sap's incorrectly reporting that AUN is
the parameter ID for VA22, would anyone know what it actually
is?

Hi,
AUN is displayed because this is specified in the data dictionary for
the used data element.
When defininte a dynpro field, based on this data element, the parameter
id AUN is proposed.
However, in the PBO of the dynpro, the actual Parameter id AGN is used.
Cheers,
Chaitanya.

DRILL DOWN FROM GL INTO AP, AR, PO & INV SUBLEDGERS FROM ORACLE DISCOVERER

Hi,
One of the key functionality , We are looking for ability to query / Drill down from GL into AP, AR, PO & Inv Subledgers from Oracle Discoverer in the Oracle Applications. We are trying to create workbook that will allow users to see summary of GL Balances, then the ability to retrieve transaction details from subledgers via GL. It looks like this is not possible using seeded folders from seeded business area in the applications EUL. It looks like we need to create custom folders to get these sort of reports.
Can this be done using seeded EUL? If yes, Can you please let me know the process and steps involved.
Incase of custom folders, Could you please let me know what are the main tables/views involved for retrieving transactional detail from subledgers like AP, AR, PO & INv via a GL query and relations from the custom folders to Journal Entries and Journal Lines folders.
I highly appreciate your advice on this subject. if anyone has Business Areas and worksheets already constructed that they could send me this would be most welcomed.
Thanks in advance for all your help.
Regards,
Venkanna

Hi
With my little knowledge in Discoverer, I feel this is highly cumbersome process from the EUL to create drilldown to Subledgers using Discoverer 4i.You may have to create and Link several tables and views to get the same.
The Standard drilldown functionality in Oracle works with GL_SL_LINK_ID and Reference columns populated in GL_JE_HEADERS and GL_JE LINES to link the GL Journals to Supplier Payment, Invoice, Inventory Receipt to PO and similarly for other modules.
Hope this helps
Regards
Sivakumar

How to insert "%" into the report figure in report painter/ drill down

Please kindly advice how to insert "%" in the calculated amount in the report painter/ drill down report.
Thank you
Sirirak

Hi,
Create a text variable (for query name, option available in query properties).
Processing Type would be Replacement path, replace with variable.
Give the variable name created for the selection box characteristic in 'Replace with variable' option.
This would replace value of the text variable with the user input value.
Hope this helps!

How to drill down into specfic row?

I am new to this website and to APEX, I have a question about having a report and when clicking on a row, it drill down to a page which only shows the row data about the clicked row.
Would be grateful if you tell me how to do that? I really need to know that..

Hi,
first i would create a master table and afterwords a detail table incl. foreign key (i.e. dept, emp). And then create a master detail form as i mentioned before. Further i recommend the documentation '2 Day + Developer's Guide' - see http://www.oracle.com/technetwork/developer-tools/apex/documentation/index.html
Regards,
Martin

Error WHen rying to Drill down in the Report

Hi ,
I am getting the below error when trying to Drill down on a characterstic in the Report.
"500 Internal Server Error"
BEx Web Application
Failed to process request; contact your system administrator
Information for Administrator
To avoid this exception see the steps below. To help SAP better investigate this issue, you will need to provide the diagnostic information from these steps.
1. Most likely, the issue you are experiencing has already been corrected. Please make sure that the most recent patch level is deployed on your system according to notes 1033246 and 1011241. Starting with Support Package Stack 16 patch level 30, BI Java is delivered according to the synchronized delivery process described in the note 1033246.
2. Please ensure that NetWeaver Business Intelligence Diagnostics & Support Desktop Tool does not report any issues on your server according to note 937697. You can start it by clicking here (administrator permissions are required).
3. When opening any customer message on this issue, please attach:
Support Desktop Tool support info ZIP file according to note 937697,
Required information for reproduction according to note 948490.
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
Termination message sent
ABEND RS_EXCEPTION (000): ORA-00904: "P0000"."CATTYPE_OT": invalid identifier
MSGV1: ORA-00904: "P0000"."CATTYPE_OT": invalid
MSGV2: identifier

Good day,
Please check if Note 1327130 helps ...
Regards,
Karen

Copying MBCZ into ZMBCZ drill down is empty

Similar Messages

Maybe you are looking for