Copying Movement Type

Dear Friends
I want to create a good receive movement type copying 101. We want to do this for segregating  GR operation on the basis of MT.
Can you tell me the deatails for creating a movement type and required assignments thereby?
Thanks Chandra

Hi Chandra.
If you still want to create a new movement type.
Tcode: SPRO -- Materials Management -- Inventory management and phy. inv -- Movement types -- Copy, Change Movement Types.
Then select the relevant from the field selection list for that movement type.
Then give the reference movement type in 'from' field and 'to' field will be ur new material number.
Then everything will be copied from the reference mvt type, if anything is to be changed, change and save.
Also go through the link [http://help.sap.com/saphelp_47x200/helpdata/en/a5/63319343a211d189410000e829fbbd/frameset.htm
Regards
Abhijit Gautam

Similar Messages

  • How to copy movement types

    hello sdn users
    this is deepak
    did any one of u worked on a movement type which is copied from the standard
    how to copy movement types
    please help it was asked in an interview
    thanking u in advance

    Hi,
    Select the movement type and go to next screen. Give range as 101 to say Y01.
    then you can specify target mvt types between this range. You cannot specify new mvt type as Z01 in this case.
    hope it clarifies.
    Seema

  • Error of copy Movement type

    When i want to copy a movement type from 551 to z55 for different scrap, I can not find z55 in the choose list in the transaction MB1A , but when i put the number in the field,it works.
    How can i make it display in the choose list?

    HI
    Goto,   OMJJ -
    > Movement types -
    >  Select your Movement type -
    > Go in to details -
    > For your movement type....Go to  Allowed Transaction ....and pl. check there MB1A is maintained as allowed transaction...
    Reward if useful
    regards
    S.Baskaran

  • Copy Movement type - Urgent

    Hi,
    When I copy mvt. 309 and name it as z09 or 909 system giving me error message that
    Specify the key within the work area
         Message no. SV 033.is there any setting where I can define number range for mvt.
    Regards,
    Chetan.

    Hi
    Pl see this link may help you
    New movement type
    regards
    rb

  • Error while copying a movement type

    Hi all,
    I want to create an movement type alternate to 501which will only update the qty not the value.
    1. For  this I have copied movement type 501 through t code OMJJ.
    2. While copying I changed the target movement type as "Y01".
    3. Selected the option of "Copy all dependent entries"
    Now i wanted to modify/delete some dependent entries to get the desired result, but unable to do so.
    such as in section "Update control / WM movement types" , I want to have only 3 lines and want to delete all other lines of special stocks, but unable to do so.
    Similarly with field "Account grouping", system not allowing me to delete any entries.
    Please suggest.
    BKR

    Hi,
    You just need to delete two items from the customizing view, go to next step, that will be okay!
    Regards
    Tao

  • GL assignment to the new movement type copied from101(GR of purchase order)

    Dear friends,
    user need another movement type copied from 101 due to diffierent GL assignment needed for the new movement type.
    while below is the only combination for PRD(cost (price) diffierences) is OBYC. and the first row is the current GL assignment for 101.
    My question is :  How do I  assign diffierent GL  for the newly copied movement type ,say Z01.
    General modification       Debit          Credit
                                         530000       530000
    PRA                              530050       530050
    PRF                               530000       530000
    Thanks in advance,
    Linda

    Hi,
    Go to t code OMJJ and locate your movement type Z01. Then go to  Account Grouping on the left pane  and create a new account modifier there. Then give the same account modifier in OBYC settings and assign the GL account against it. 
    Thanks,
    Atal

  • Movement type 651(copy Z651) make it reduce consignment stock like 632 does

    I copied movement type 651 to Z651 in order to have an inspection type attached.
    Now it needs to post the consigment stock (special stock W) like movement type 632 does.
    I cannot use 632 because it does not create an inspection lot.
    How can I make my Z651 reduce the consignment stock?

    Hi,
    Generally  by using movement type 651, you post returns from a customer with a return delivery in Shipping to blocked stock returns. Special stocks are not possible for this movemnt type and the special stock for consignment is K. Hence Z651 will not fulfill your requirement. Please use 632 and create inspection lot manually using the T-code QA01.Thanking you.

  • Movement type and Value string

    Hi,
    I have copied movement type 101 to Z02. Is it possible to change the value String from WE01 to something else. My purpose is to post to a different account instead of GRIR while MIGO for free goods. So please don't suggest me to change in OBYC as the change is going to effect every MIGO which we don;t want to happen. Any ideas?
    Thanks

    The value strings contain keys for the posting transactions that can       
    lead to G/L account updates in the case of an FI-relevant posting. These   
    value strings are predefined by SAP. You cannot change value strings or    
    the transactions they comprise in Customizing. For each of these posting   
    transactions, you can set up automatic postings in dependence on the       
    other influencing factors.                                                                               
    The value string controls the process of G/L account determination for     
    transactions/events of the movement type (see unit Valuation and           
    Account Assignment), whereas the quantity string controls the updating     
    of the material master fields.                                                                               
    In SAP R/3, the value string WA01 is assigned to various goods issues      
    and other goods receipts. Further differentiation in the automatic         
    account determination process for these different movements is             
    accomplished via the account grouping code.

  • Movement type 561 and GL Account 24301000

    Hello guys,
    I am trying to upload inventory through MB1C but receiving following error:
    "field selection for mvmnt type 561 / GL AC 24301000 differs for settlement period (003)"
    Can anybody help me how to fix this.
    Thanks

    Hi,
    The field selection for Movement type 561 is not matching with the field selection of G/L AC 24301000. This is causing the problem.
    Go to Tcode: OMWB, in this transaction you can check the difference between the field selection of movement type 561 and G/L AC, then change the field selection accordingly in SPRO for movement type (MM - Inventory -- Movement types -- copy movement types and Tcode: FS00 -- input the G/L account and company code, press enter -- click on tab- create/bank/interest, double click on the field status group, then check the settlement period whether it is suppressed, optional, required in both cases. They should be same in movement type and G/L field selection.
    Hope this helps.
    Thanks,
    Viswanath

  • Regarding Movement type 601 and 602

    Hi,
    We need to copy movement types 601 and 602. I would request to please provide me the configuration settings and all integration settings.
    Thank You,
    Waiting for your reply.
    Regards,
    Usha.

    Execute OMJJ where you have the option to copy the standard movement types.  Also search the forum before posting such answered question.
    thanks
    G. Lakshmipathi

  • Reservation with movement type 541

    Hello Experts,
    I am making reservation with mov type y41 (copy of 541) by allowing transaction MB21 in its customizing.My problem is at the time of making reservation system is not reflecting vendor field, whereas in t code MB1B vendor field is appearing.I also checked in field status group there vendor field is appearing as mandatory.
    Can anybody suggest me how can i reflect vendor field at the time of making reservation with copied movement type in my case its Y41
    Regards
    VS

    Its not possibled i tried

  • QM in subcontracting mov type  return.

    Dear friends ,
    We need to copy movement types 541 and 542 to send and returns stocks to outside storage location.
    Could I use and return by MB1B copy of mov type 541/542 putting the stock onto quality control (QM) ?
    Is it possíble use it  to check material by QM functions on return ?
    best regards,
    ale

    In the material master create QM view
    Please create QM info record :QI01 for the subcontracting material  using SAP QM module person.
    Create a P.O. with subcontracting.
    You can send the subcontracting material to the vendor using T.code: ME2O
    You can inward the material in 101 movement , the qty will automatically in  QM .If you inward in 101 movement the stock  will be deducted in 543 movement from the subcontrator end.
    once the inspection is completed. you have take USER DECISION .Ask you QM moduel person it will be in STOCK
    G.Ganesh Kumar

  • MM Change Value String from new Movement Type. (URGENT)

    Dear friends ,
    We have copied moviment type 501 and we need to change the value string to this movement.
    So after copy to 933 and creates value string ZA01 copied from WA01 , which tables should I change to value string of movment type use it ?
    We are using ECC 5.0.
    Best regards,
    Alessandro

    Could you please tell us what you want to achive with this setting though iam 99% sure that what you told in this thread cannot be done. WE always try to create the new movement types using exisiting movement types. So , transaction key/ Value string are copied over . So, i highly doubt if you can even change those fields as they are defined by SAP and used as part of their code and highly recommends not to attempt to play with them.
    If you want, you can check in OMWN and OMJJ to see that they are uneditable..
    please let us know what you want to achive with this so that we can try to help you.
    Please revert back to us if you have achived in creating a copy of WA01 and also let us know how you did it . Iam just curios.
    AH

  • MB1A requires Serial number with some movement types

    Hello:
    I am using MB1A for goods movement. The client has a movement type (X82) which when I use it does not require serial number for goods movement. There are other movement types which when I use them in MB1A do require serial number. Now, I copied movement type X82 to a new movement type (X68) (IMG activity 'Copy, change Movement Types', option 'Copy all'). I did again the exercise in MB1A with new movement type X68 and what happened: SERIAL NUMBER IS REQUIRED!
    Do you know about any additional configuration in order to achieve that there NO SERIAL NUMBER is required? I appreciate a lot your help as I am a little bit hurried with this issue!
    Thanks in advance,
    Dominik Ley
    Santiago, Chile

    D,
    X82 ??
    All movement types are 3 digit (non-alpha). Are you absolutely sure you have an X82 movement type ?
    If you have that is quite an unusual bespoke development.
    Nick W

  • Repair / Subcontracting with non standard mov types.

    Dear friends,
    I have copied mov type 541 to 941 , 542 to 942 and 543 to 943.
    When I post trhu MB1B .. with mov.type 941 , and receive it via MIGO with mov type 101 the system is determining the mov type 543 and not the 943 as we do need.
    Does anyone knows if I got to change this behavior ?
    This scenario is to use the same functionality of Subcontracting to repair materials. Other Ideas ?
    best regards,
    Ale

    Hi,
    Please go to the transaction code- ' OPKA ' and in the 'Parts Provided' column of the table replace 543 with 943 movement type for the movement type 101.Save your data and try again the process.
    Please note that, the standard Sub-contracting procedure (541-101(543)) will be impacted with this change.
    Regards,
    Narayana.

Maybe you are looking for