Copying music failed, unknown error (-50)

Trying to move my library from one external hard drive to another external hard drive. Did it by going to Preferences-Advanced and changing the drive/folder location and then going to Advanced-Consolidate Library. All seemed to be going ok and then the process stopped (about 40% done) with the error "copying music failed. An unknown error has occurred (-50)". I've searched the forums and Google without luck. There was some mention of filenames. However, the songs with the longest pathname made it over to the new drive just fine. So it's not length. A quick check in iTunes using "GetInfo" showed some songs on the old drive and some on the new drive. At what point do these get updated in the consolidation process? As they are getting copied (one song at a time) or all songs before the copying process starts???
For the moment, I have changed the drive back and consolidated the library back to the original drive and that seems to be ok. Still want to move the library but don't know what caused it to stop the first time so thought I'd ask here before trying again.
Thanks.

hi usablues!
hmmmm. i've been seeing this particular kind of "anomalous" (-50) off and on since 4.9.
this is experimental. but we've been seeing different sorts of strange unknown error codes under similar circumstances when antivirus or antispyware is interfering with itunes' ability to read the library files.
... so ... can you get a consolidate to go through properly if you have your antivirus/antispyware switched off?
love, b

Similar Messages

  • Consolidation error "Copying Music failed. An unknown error occurred (-51)

    I want to Consolidate my large music library and add all of the songs from my MacBook to my new, much larger iTunes music folder, which is on a Buffalo Terastation NAS, so that I may easily back them up. When I "Consolidate", I immediately get an error message that says "Copying Music failed. An unknown error occurred (-51)."
    Has anyone else experienced this and knows how to fix it? I can't seem to find a fix for that error code.

    I found this link about error numbers here ...
    http://www.koders.com/c/fid53B3BE16088320EE31E67B12F901FE3FB9D1F480.aspx
    DennisinChicago wrote:
    I want to Consolidate ... I immediately get an error message that says "Copying Music failed. An unknown error occurred (-51).
    Error # 51 means that the Buffalo Terastation NAS is unreachable on your local network.
    RRutter wrote:
    "Copying Music failed. An Unknown error occured (-48).
    Error # 48 means that the "Address already in use". Is your External Hard Drive connected by Firewire or Ethernet?
    ... knows how to fix it?
    Look at this Apple Article about how to Consolidate the iTunes Library ... http://support.apple.com/kb/HT1449
    If you follow the steps in this link I think that it should work. But first you must setup the Hard Drives as a 'Bootable GUID Partition Table' with 'Owners' & 'Journaling' Enabled in order to retain the iTunes users permissions.
    Good Luck.
    Buzz

  • Error "COPYING MUSIC FAILED. The disk could not be read from or written to"

    After following the procedurest to move the iTunes music, the computer started whirring away, happily copying and consolidating all the song files to the new target folder.
    After copying 68gigs of 130gigs perfectly, it stopped dead and the following iTunes error message appeared:
    "COPYING MUSIC FAILED. THE DISK COULD NOT BE READ FROM OR WRITTEN TO"
    I am copying to an external LaCie 500g hard disk, and the current music file is split between folders on the laptop and folders and a 2nd external LaCie Hard disk. It did not appear to have any problems copying and consolidating files from both locations, until the error message showed up.
    How can I solve this?
    I really need to consolidate this music file.
    macbook pro   Mac OS X (10.4.6)  

    OK I figured it out!
    It was a dodgy file....I sorted the file folders by date, and as it turned out within the "compilations" folder there was a CD where only about half the tracks seemed to have been copied over. Could not have identified this simply from the time indicated on the finder folder sort, because there were several CDs copied over in the that same minute.
    I went back to the original itunes folder, deleted all the files from that CD in itunes, then also deleted all those files from the original disk and the target disk.
    Tried the "consolidate library" again, and it completed nicely. 200megs of music and videos.
    Very happy to solve this problem after 3 weeks.

  • The attempt to burn a disc failed, unknown error (261). Can't back up to CD

    The attempt to burn a disc failed, unknown error (261). I get this message every time I try to back up my music from itunes on to a CD. It doesn't matter if I try to back up all music or only music purchased from itunes. So far I have not been able to back up anything. Can someone please help me!!!! I have tried everything on the support website from apple, and nothing has worked. I am beginning to get very frustrated.
    Thanks

    +I know my computer is up to date on firmware, because I just bought this laptop 4 months ago - it's a brand new Dell Inspiron 1721.+
    Actually, in that case I definitely think you should check your firmware. I just had a look at the 32-bit Vista downloads page at Dell for your Inspiron 1721, and there's firmware updates listed there for four different drive models, all dated within the last four months.
    Head to the following Dell page and enter your model information to get to your Downloads page:
    Dell drivers and downloads

  • The attempt to burn a disc failed, unknown error (261) Can't back up on CD

    The attempt to burn a disc failed, unknown error (261). I get this message every time I try to back up my music from itunes on to a CD. It doesn't matter if I try to back up all music or only music purchased from itunes. So far I have not been able to back up anything. Can someone please help me!!!! I have tried everything on the support website from apple, and nothing has worked. I am beginning to get very frustrated.
    Thanks

    +I know my computer is up to date on firmware, because I just bought this laptop 4 months ago - it's a brand new Dell Inspiron 1721.+
    Actually, in that case I definitely think you should check your firmware. I just had a look at the 32-bit Vista downloads page at Dell for your Inspiron 1721, and there's firmware updates listed there for four different drive models, all dated within the last four months.
    Head to the following Dell page and enter your model information to get to your Downloads page:
    Dell drivers and downloads

  • "Copying Music failed. The filename was too long or invalid." for Mac

    I'm getting this error when attempting to move itunes libary to new HD (Drobo FS)
    "Copying Music failed. The filename was too long or invalid."
    Are there any Apps or scritps i could run to locate these files to correct/delete?

    Unconsolidated should now give you a much shorter list, presumably the difficult track will be either first or last in this list...
    I've written a script called DeDuper which can help remove unwanted duplicates. See this  thread for background. You'll probably have to disable the progress bar again.
    It only works on files connected to iTunes that have identical tag info. If you're not certain it might pay to make sure first using iTunes Folder Watch to scan for files that are in the media folder but not in the library. It also has a "scan for dead tracks on startup" option with detects missing files.
    tt2

  • "Copying Music failed. The filename was too long or invalid."

    I've been trying to 'consolidate library' inorder to get all my music held and managed under Itunes so I can delete it from other places on my computer & avoid holding multiple copies (in line with Chris CA's guidance in this thread https://discussions.apple.com/thread/2812666?start=0&tstart=0)
    All goes well until I get to the 'consolidate library' step, it starts off copying files & seems to be going alright, then at some point I get the error message :"Copying Music failed. The filename was too long or invalid."
    This error message doesn't help me much as I've no idea where to go from here. I've tried consolidating library twice now and got the same message each time.
    I'm assuming there must be some way to either fix it or identify the file causing the issue?
    Thanks

    Unconsolidated should now give you a much shorter list, presumably the difficult track will be either first or last in this list...
    I've written a script called DeDuper which can help remove unwanted duplicates. See this  thread for background. You'll probably have to disable the progress bar again.
    It only works on files connected to iTunes that have identical tag info. If you're not certain it might pay to make sure first using iTunes Folder Watch to scan for files that are in the media folder but not in the library. It also has a "scan for dead tracks on startup" option with detects missing files.
    tt2

  • Cannot 'Consolidate Library" : Copying music failed , the file name was too

    Hi,
    I am trying to move all the music library to my new computer ( this is my 3rd time of changing my PC). I tried to consolidate the library... but the message was
    Copying music failed , the file name was invalid or too long"
    I already moved the Itunes to my new pc, but my new Itunes cannot "Relocating my file"
    Please help me

    To find out which file it was, look at where you were
    copying them too and see which was the last file
    copied - and then go back to your source, and go to
    the next one - it should be that one.
    I just wanted to add that I had the same issue (failure to finish copying and "invalid or too long" error msg) and at first didn't see how looking for the last file copied would work since iTunes is copying into folders.
    Duh.
    Reverse sort by date modified (newest folder at the top of the list) then drill down to the folder containing the files being copied. Voila. There was the (missing) culprit, and I knew which file to rename in the source folder.
    Thanks for the kick in the brain pan.
    Sony VAIO PCG-V505ACP Windows XP Pro

  • Copying music failed. The file name was invalid or too long.

    I went to consolidate my music, but when it got about 2/3 of the way through, it stopped with the error message, "Copying music failed. The file name was invalid or too long." I don't know which file it is referring to. How do I find this out?
    I needed to cosolidate so I could backup the entire library to DVD. Now I'm left with two partially complete libraries with many duplicates.

    To find out which file it was, look at where you were
    copying them too and see which was the last file
    copied - and then go back to your source, and go to
    the next one - it should be that one.
    I just wanted to add that I had the same issue (failure to finish copying and "invalid or too long" error msg) and at first didn't see how looking for the last file copied would work since iTunes is copying into folders.
    Duh.
    Reverse sort by date modified (newest folder at the top of the list) then drill down to the folder containing the files being copied. Voila. There was the (missing) culprit, and I knew which file to rename in the source folder.
    Thanks for the kick in the brain pan.
    Sony VAIO PCG-V505ACP Windows XP Pro

  • Copying Music failed. The disk could not be read from or written to.

    I just added a server to my home network. It's called "DELLSEVER" and is networked via TCP/IP on a Windows Network. I can copy files to and from it no problem. I created a shared folder on the server with public read/write access and no password called "Music".
    I wanted to move my iTunes music folder (~110GB) to the server's Music folder.
    I followed the instruction found on this forum and went into iTunes(6.0.4.2) preferences -> Advenced -> Itunes Music folder location -> clicked Change -> selected the directory from the available list -> clicked ok.
    Under "iTunes Music folder location" it now says "\\DELLSERVER\Music\iTunes", and clicked ok to close the preferences.
    I then clicked Advanced -> Consolidate Library -> Consolidate.
    I then get the error "Copying Music failed. The disk could not be read from or written to."
    I then tried to manually copy my library from dragging the folded from my PC to the server. That worked fine, but I can't get iTunes to use the server's copy of the music, it keeps going back to my PC's copy.
    Please help. I've only got about 30 Meg left on my PC's drive with iTunes and need to relocate my music to the server's drives.
    And if it matters, I am Administrator on both my PC and the server.
    I also tried de-authorizing my PC just in case. Made no difference.

    Thanks Katrina. Mapping the folder to a drive letter allowed iTunes to start copying the music across.
    Unfortuntely iTunes didn't notice that I manually copied the files across earlier, so it's overwriting them. I'm about two hours into the transfer with about another hour to go, but it looks like it's going to work.
      Windows XP Pro  

  • Problem consolidating to NAS "Copying Music Failed"

    Can someone offer advice on how to solve a problem with iTunes for Windows? I get an error message when I consolidate. Error is "Copying Music failed. The disk could not read from or written to". I have a laptop and the HD is full. I bought an Infrant ReadyNAS NV+ 1TB. I have copied files to the NAS without any problem. I followed Apple's Written Help Instructions to "Moving your ITunes folder". I followed the instructions and got the error above "Copying Music Failed...". Preferences->Advanced..Itunes Music Folder Location...change...<\\NAS..
    Itunes Music>. Also enabled Keep Itunes Music folder organized. Disabled Copy Files to Itunes Music..... Then went to Menu Advanced->Consolidate Library. I then get the error "Copying Music failed. The disk could not read from or written to". The NAS from Infrant was simple to install on my home LAN. There must be something simple that I am missing. The NAS was easy to install. And I have been transferring Word/Excel/etc files like crazy to the NAS to store. I cannot figure out why the instructions from Apple do not work? I cannot figure out why the consolidate Library function fails. Any advice would be appreciated.

    I have found with network storage that mapping a drive letter to a folder on the network storage drive works with iTunes. Couldn't get iTunes to access network storage without mapping drive.

  • TFTP 'configuration update' from 5508 WLC fails stating reason as '%Error: Config file transfer failed – Unknown error –refer to log'

    Dear Experts,
    I have two WLCs and other management devices as part of same subnet. I am able to upload ‘configs’ from all the devices on to my TFTP server. However when I am attempting to do the same from one of my WLC, it is failing consistently stating error message as:
    ‘%Error: Config file transfer failed – Unknown error –refer to log
    Has anyone else too faced the same issue and how would we overcome this? Any specific debug that could help get more details on it?
    Though the error message says, refer to log but still I don’t see anything that gets reflected in ‘Monitor logs’ which is related to ‘configuration file’ upload failure.
    WLC code: 7.4.100.0
    PFA as the error snippet.
    Thanks and Regards,
    Adnan

    Hi Kaneswaran,
    Just a soft reboot helped me solved the problem :). Still I am on 7.4 and facing no issues after this. 
    Apologies for coming too late to respond. Getting a down time window was not that easy and so was much delayed to try soft reload. I am still on 7.4 and facing no issue. 
    Glad that in your case it starting working all of a sudden. Could you please verify from 'show tech-support' to confirm if by chance your WLC had undergone any crash that could have caused the WLC to reload and thus accidently fixing the issue :)
    Best Regards,
    Muhammed Adnan 

  • IPhone 5 firmware restore failed (unknown error 1)

    hi everyone,
    I updated my iPhone 5 from ISO 6.1.2 to 7.1.1 via iTunes by restoring and it was working fine but when 7.1.2 update came n I was trying to install via wifi, it failed a lot of times. so I connect my iphone to iTunes n tried by restore iphone, during this my phone was restated and it never showed up on iTunes so I disconnect iphone, since that time iphone is in recovey mode, now whenever I connects iphone to iTunes, a msg pop up on iTunes "iTunes detected an iphone in recovery mode. You must restore this iPhone before it can be used with iTunes." so I click on and then I click on restore and update. it goes for Extracting Software> Restoring iPhone software>verifying iPhone software>restoring iPhone firmware  but never completes, a msg comes on iTunes iPhone restore failed. unknown error(1) I does the same like I m putting a link from someone for iphone 5s.
    https://www.youtube.com/watch?v=vQq9P0xiSGk
    if someone has a solution please share with me asap.
    Thanks

    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
    Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Confirm that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.

  • Attempt to Burn Disc Failed Unknown Error (4450)

    Attempt to Burn Disc Failed Unknown Error (4450) this is what i get whenever i try to burn a disc, help?

    I've been having the exact same problem and it's really making me angery cause every CD I try and burn ends up with not even a full song on it and the computer ejects it with error4450 popping up on the screen any help would be greatly apreciated

  • Installation operation failed.Unknown error (code:...

    I am trying to intall the latest version of Nokia Ovi Suite 2.2.1.23 And keep getting Installation operation failed.Unknown error (code: 1612).
    Have tried:-
    Nokia PC Suite Cleaner
    Uninstall Ovi Suite, PC Connectivity solution and Nokia Connectivity cable drivers from Add/remove program Delete the files from...
    C:\Documents and Settings\User\Application Data\Nokia\Ovi Suite C:\Documents and Settings\user\Local Settings\Application Data\Nokia C:\Documents and Settings\All Users\Application Data\OviInstallerCache Used MSI clean up utility Restart PC.
    Any solutions please...
    using :-
    Nokia 5800 XpressMusic 
    V50.0.005
    Windows 7 (32 bit)

    These errors is coming up, becasue the windows installer is corrupted. Please reinstall windows installer from the link provided below.
    http://support.microsoft.com/kb/2438651/en-us
    This should defnitely work..
    All the best and good luck.
    Cheers
    Show appreciation by clicking the kudos star :-), or gesture by typing thanks

Maybe you are looking for

  • I updated my iphone and everything disappeared. How can I get that back?

    I upated my iphone 3g today and when the update was finished all my contacts, photos, txt messages, and everything was gone. How can I get all that back, or atleast my contacts? Please someone help!

  • Combox EventListener problem with SDK 3.5

    I am trying to build a custom combobox component and making that editable at the time of open and non-editable after close. Below is my code that is working fine SDK 3.2 but with SDK3.5 it is now. I mean with SDK3.5 when i click open it closes itself

  • Performance Issie in SQL Statement Using Hints

    Hi, I am using Oracle version 10G. I am using a INSERT statement as: INSERT /*+ PARALLEL (TEST,4) */ INTO TEST(COL1,COL2,COL3) SELECT COL1,COL2,COL3 FROM DUMMY; For increasing the Performance I am using the above statement. Will the usage of Hints in

  • Changing name of Capture Scratch files

    My Capture Scratch files have a lot of untitled files although I named the project. I would like to rename them to match the project name but when I did this and tried to reconnect FCE insists that the file name be the same. Is there any way to chang

  • Official photoshop elements 5.0 has stopped working

    for a reason i have no idea... I have been told i have to uninstall and reinstall but in my programs files where i uninstall and reinstall all programs its not on that list and dont know where to go to uninstall it... any help would be much appreciat