Copying of Batch number in GI and then to GR - MM

Dear SAP Gurus,
I have created a Stock transport order (STO). Against that STO I have created the delivery. In the delivery I enter the Batch Number/Characteristics(MM). When I do the Goods Issue against that delivery the Batch number is not being copied. Against that Goods |ssue, when I do the Goods Receipt I have to enter the batch number/characteristics manually.
We have a two step Storage Location to Storage Location transfer.  When we do the Goods Issue the stock goes to Goods in Transit and then the GR is done against that GI.
Please let me know how to copy the batch number/characteristics automatically. Please also mention the name of the user exit if this can be handled through a user exit.
Thanks and Regards
Shehryar Zuberi

Hi Shehryar
When you post the receipt (via MIGO or MB01) if you change the way you receive (e.g with reference to the outbound delivery) then all of the batch details and characteristics will be copied into the receipt
The batch is only copied when you receive with reference to the outbound delivery from the STO
Good luck
Steve

Similar Messages

  • Copying of Batch Number and Characteristics not copying in GI

    Dear SAP Gurus,
    I have created a Stock transport order (STO). Against that STO I have created the delivery. In the delivery I enter the Batch Number/Characteristics(MM). When I do the Goods Issue against that delivery the Batch number is not being copied. Against that Goods |ssue, when I do the Goods Receipt I have to enter the batch number/characteristics manually.
    We have a two step Storage Location to Storage Location transfer.  When we do the Goods Issue the stock goes to Goods in Transit and then the GR is done against that GI.
    Please let me know how to copy the batch number/characteristics automatically. Please also mention the name of the user exit if this can be handled through a user exit.
    Thanks and Regards
    Shehryar Zuberi

    Dear All,
    Can anyone help please?
    Thanks
    Shehryar Zuberi

  • Copying of Batch Number and Characteristics in GI/GR

    Dear SAP Gurus,
    I have created a Stock transport order (STO). Against that STO I have created the delivery. In the delivery I enter the Batch Number/Characteristics(MM). When I do the Goods Issue against that delivery the Batch number is not being copied. Against that Goods |ssue, when I do the Goods Receipt I have to enter the batch number/characteristics manually.
    We have a two step Storage Location to Storage Location transfer.  When we do the Goods Issue the stock goes to Goods in Transit and then the GR is done against that GI.
    Please let me know how to copy the batch number/characteristics automatically. Please also mention the name of the user exit if this can be handled through a user exit.
    Thanks and Regards
    Shehryar Zuberi

    Dear All.
    Please help me solve this problem.
    Thanks
    Shehryar Zuberi

  • In iPhoto, I want to copy certain photos in an event and then have the copies in another event WITHOUT removing the original photos from their original event; how to do that?

    in iPhoto, I want to copy certain photos in an event and then have the copies in another event WITHOUT removing the original photos from their original event; how to do that?

    The only way to do that is to export the image to a new file and then re-import it.
    It's not really the intended way of working as it uses twice the disk space and is inefficient.
    Use Albums instead. A Photo can be in any number of albums and use no extra disk space as it just simply references the image in the Library. Albums can be sorted any way you want - including manaually - and can have image from anywhere in the Library just by drag and drop.

  • The operation can't be completed because an unexped error occurred (error code-50).   This appears when I'm copying a file to the drive and then I wasn't able to edit to my drive.  Then this morning I can't open my project file.  What to do?

    Message: The operation can't be completed because an unexped error occurred (error code-50).
    This appears when I'm copying a file to the drive and then I wasn't able to edit to my drive.
    Then this morning I can't open my project file.  I get this message: The project appears to be damaged, it cannot be opened.
    What should I do!??
    I  have moved my project onto 2 different external hard-drives now.

    Hi There,
    After looking around for this error, it seems to be related to OS, we would recommend you to contact Apple support for this.
    Thanks,
    Atul Saini

  • How  to modified automatic batch number with plant and current year details

    hi all,
            i want tomodify automatic batch number with plant and current year details. if any one understand plz explain.
    thanks,
    radhakrishna.

    Hi,
    I am not clear what is u r requirement exactly?
    I  mean you don't want automatic batch no or modify the batch no.  with plant means and Current year details means.  Can give details more
    Regards
    Ganesh

  • I am having the same problem I think.  With mobileme you simply copy documents to the idisk folder and then synch.  I cannot seem to sink that folder anymore.  Any idea as to how I can simply copy folders to icloud and then access the MS Word and PDF file

    I am having the same problem I think.  With mobileme you simply copy documents to the idisk folder and then synch.  I cannot seem to sink that folder anymore.  Any idea as to how I can simply copy folders to icloud and then access the MS Word and PDF files on my iphone?

    Apple never bopthered to explain that this would happen
    Your iDisk is still accessible after moving to iCloud in exactly the same way as before. Nothing is deleted until June 30th 2012.
    , so I could easily have lost ALL of the files I kept on iDisk.
    No, you couldn't. Firstly, nothing was deleted from your iDisk. Secondly, any files stored on your iDisk should never be your only copy. Even if your iDisk spontaneously combusted, you should keep local backups elsewhere.
    Does Apple WANT people to move their storage elsewhere and stop paying Apple for it?
    Yes. Apple doesn't provide such a service anymore, nor are you paying them for it.
    Apple has made no effort to suggest remedies for the problem it has given iDisk users
    They've provided instructions on how to download your files from your iDisk. What you do with them after that is your choice.

  • How can I create a matrix question? Specifically, I need a question in table format that allows each respondent to list a number of events and then data for each event (date, location, number of participants, topics covered, etc.

    How can I create a matrix question? Specifically, I need a question in table format that allows each respondent to list a number of events and then data for each event (date, location, number of participants, topics covered, etc.

    Hi,
    Sorry, we do not support a matrix-question field.   Please try the multilines text field (where your participant can enter multiple lines in the input text box) and see if it works for you.
    Thanks,
    Lucia

  • Serial number works once and then invalid. Help!

    Has anyone else had this problem? I'm using Vista 64-bit.  I've purchased two different Photoshop CS4 Extendeds off of ebay and both have had this same problem. Makes me wonder if I'm doing something wrong. I install photoshop, enter the serial number, all works fine. The next time I open up photoshop, it says that the serial number is no longer valid. I tried calling adobe the first time and they said that the number I had given them was invalid, yet it worked the first time. It's like I use it once and then the activation or whatever won't let me enter it again. I'm not sure what to do! Once you enter in a valid serial number, it shouldn't keep asking me for a new one. Incredibly frustrating!!!
    Trisha

    Buying Photoshop on eBay is throwing money away. You are almost always going to get a pirated copy, and will usually find that it cannot be registered.
    Buy a real copy from a legitmate vendor and it might be cheaper in the long run.

  • Copy the SP2 Portal File System and then Migrate??

    Hello All,
    Is it possible to copy the EP6SP2 Portal FileSystem and the SQL Database on the other host and then migrate start the migration process from this host. I mean to create the export file from this new host(where we copied the fileSystem and the DB). Because anyways we have to shut down the portal while migrating, so i think this can be done..
    Any ideas.
    Vaib

    Hi Vaib,
    > That's my thread only
    Totally right, I know. I just wanted to clean up the cross post particles
    > Anyway...do you know
    Not really, but check out https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b4e7b090-0201-0010-ada6-b9bc09c7f354 if it may help.
    Hope it helps
    Detlev

  • How do I copy a DVD to my mac, and then trim it to upload clips to YouTube? They are not copyright protected DVDs.

    I am trying to take a DVD (non copyrighted) and be able to add 10 min clips of it to a YouTube Channel. How do I copy that DVD to my Mac and trim the clips I want to upload. Thank you.

    Copy the DVD to your desktop, then:
    You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    which is free, but you must also have the  Apple mpeg2 plugin :
    http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
    (unless you are running Lion in which case see below))
    which is a mere $20.
    Another possibility is to use DVDxDV:
    http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
    which costs $25.
    For the benefit of others who may read this thread:
    Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
    And from the TOU of these forums:
    Keep within the Law
    No material may be submitted that is intended to promote or commit an illegal act.
    Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
    If you are running Lion or later:
    From the MPEG Streamclip homepage
    The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion onwards, however MPEG Streamclip still needs it. See this:
    http://support.apple.com/kb/HT3381
    To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
    The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. (The same applies to Mountain Lion and Mavericks even though they have it preinstalled.) You don't have to install QuickTime 7.

  • Batch number format setup and auto batch creation during first GR

    Dear all,
    This is a batch question.
    I know that both the master batch and the stock data for the batch are created automatically during the first goods receipt. Thus, I do not need to create this data manually.
    My question are following:
    1 - what is the machnism that trigger this auto-batch creation in the system during the first goods receipt? is it from some kind of configuration?
    2 - If I want my batch number to appear in certain format, for example, first four digit is customer code, middle two code is country code (i.e. US, UK), and the remaining as goods receipt date. How do I setup this in the SAP system.
    3 - If batch classification is active, one can assign characteristic values to the batch when entering the goods receipt. HOwever, normally when I perform a goods receipt in MIGO, after putting in the production date and the batch number, I will hits the checkbox and if no problem, I will post the 101 document. WHERE in the MIGO screen I can assign the characteristic value to the batch?
    Thanks.

    My question are following:
    1 - what is the machnism that trigger this auto-batch creation in the system during the first goods receipt? is it from some kind of configuration?
    ==> Yes - See IMG activity 'Define batch creation for Goods Movements'
    2 - If I want my batch number to appear in certain format, for example, first four digit is customer code, middle two code is country code (i.e. US, UK), and the remaining as goods receipt date. How do I setup this in the SAP system.
    ==> See exit EXIT_SAPLV01Z_003
    3 - If batch classification is active, one can assign characteristic values to the batch when entering the goods receipt. HOwever, normally when I perform a goods receipt in MIGO, after putting in the production date and the batch number, I will hits the checkbox and if no problem, I will post the 101 document. WHERE in the MIGO screen I can assign the characteristic value to the batch?
    [[> See IMG activity 'Activate Batch Classification for Goods Movements in IM"

  • Batch number is blank and not editable during packing into Handling Unit

    Hi, we have an issue that the batch number (VEPO-CHARG) for delivery line item is not showing up and not editable during packing into Handling Unit through shipment transaction VT01N.
    When we have a batch split for one delivery line item, we want to be able to choose which batch to be packed into each handling unit.
    Does anybody know any userexit to populate that field or at least make it editable? Is there something in the configuration that make it not show up?
    We tried all the SAP suggested userexit for VT01N but nothing seem to control the handling unit packing screen.
    Any hint is appreciated and point will be rewarded.
    Minami

    you should take the ovn on the effective date. A max will not always work.
    Is the max also not hiding a no data found?

  • Can I buy a new copy of CS3 from say, Ebay and then upgrade to CS6 and use there promotion?

    .

    What's being unsaid here is that this is likely what would happen:
    1.  You would buy software from eBay, which would come with a serial number.
    2.  You would try to use that serial number to purchase the Photographer's bundle, and Adobe would almost undoubtedly not allow it, because the serial number is bogus or belongs to someone else.
    So the short answer is:
    No.
    -Noel

  • Is it possible to copy TV shows off a DVD and then into iTunes?

    My brother has the DVDs of The Office. I'd like to watch episodes on my iPod, if that's even possible. Is there a program that I can use to copy the episodes onto my computer? Is there another program that would convert the episodes into the format that iTunes and iPod need to play the episodes?
    Thank you!

    In order to copy a commercial DVD, you'd need to break the encryption. Breaking the encryption is, in the U.S., illegal. Because Apple is a U.S. company and these forums are hosted out of the U.S., the terms of use prohibit us from discussion software and methods. Sorry.

Maybe you are looking for