Copying of function group

Hi all,
Please help me in this issue.
when i copy function group , i am ablw to copy the function modules but i am not able to copy the Inlcudes in the function group
can anyone please explain how can i copy the includes also
Thnaks in Advance
K reddy

Hi k reddy,
it may depend on the release you use. I remember it was not that easy in the past as already described.
Note that copying functions as well as includes you always need new names for copied objects.
Now, if it is not too much work: Go to main program, see the INLUDE statements for the 'old' function groups includes. Change to new names and copy the includes manually to new name.
Next time it may work.
Or delete new function gropu and start all over again.
Note: If any inluce includes other include statements: Those inludes you must copy and rename manually (if changes are required).
Regards,
Clemens

Similar Messages

How to copy the function group

hi there,
i want to copy the function group 2012. plz let me know the possibility.

use FM RS_FUNCTION_POOL_COPY to copy
Look at this thread
how to copy the function group

System error: Error when copying parameter function group CR01

Dear friends
I am getting the above error while doing the Backflushing in REM.
It occurs when backflushed quantity is issued ,and while confirming the
ACTUAL ACTIVITES above error occurs..........
We have upgrade the system from SAP 4.7 to ECC6.0.
It is giving some error in CRM system but we don't have CRM system.......
Message displayed is as below..................
System error: Error when copying parameter function group CR01
     Message no. CR085
Diagnosis
     Internal error.
Procedure
     Repeat the transaction.
     If the error occurs and you have a CRM System connected to your ERP
     System, the document may have been archived in the CRM System.
     If the error occurs again, inform your system administrator. If the
     error cannot be corrected, call the SAP Hotline directly. Describe which
     steps preceeded the error.
Thanks& Regards
Sandeep
Message was edited by:
        Sandeep Bhowmick

Hi Sandeep
Standard R/3 does not allow backflush without any operation. You need to have an operation to do a backflush.Error message CR 085 is issued because there is no operation in the routing of the material backflushed. System should issue an error when no operations are found in routing. Although, error message CR 085 is not correct, more appropriate message RM 824 for this a program correction is requried check note (691161).
Regards
Prasad
Reward if useful

Copying the function group CHVW

Hello friends,
I am trying to copy the fucntion group ( CHVW) to Z-Function group but I am unable to copy the SAP is
showing the message LCHVWTOP is inactive, if I see LCHVWTOP is active in Standard Function group.
Thanks in Advance.
Ravi Yasoda

Hi Adnan;
Are you sure you haven't dont release second or more requests for FG?
If you have more requests, your FG may hasn't be last FM list.
Yo can check below include in SAPLZ<FG> function pool.
INCLUDE LZ<FG>UXX. " Function Modules
Are you seeing last FM list?
Best regards.

Copying a function group gives error

Dear All,
I am copying a function a group JV05. I have copied evrything i.e all the includes, TOP etc. But when i activate the group it gives me error. What could be the problem? I have tried to activate the includes & TOP individually. Still it gives error for some variables. Please help me out.
Thanks in advance!
Regards,
Prasad

hi ,
**Go to se80..**
**1. Select function group**
**2. Enter JV05 as name "-----> click on spectacles button.**
**3. Right click on JV05**
**4. Select copy "--------> give a Zfunction group name**
**5. "Copy all the function modules in this function group with zfunctionmodules.**
**6. Save & Activate.**
Regards,

Copy of Function Group SETB giving error

Dear All,
I tried to copy the standard function Group SETB to ZSETB(Which is having SE16 transaction attached) but during activation the include is giving error as "The Field TABNAME is unknown". I have just copied the entire functional group along with function modules. No clue how I can avoid the error. I deleted the include LSETBF10 and re-copied, but error is persisting. Do you have any clue???
Thanks and regards,
AD

Hi!
Thanks for all your valuable reply. I could avoid the error but could not avoid another error: "The parameter INTTAB of the Global interface has already been defined outside the function". While double clicking on the error, I have reached to a hidden include (Not possible to browse through Navigtion) LZSETB$07. The include contains the following code:
THIS FILE IS GENERATED BY THE FUNCTION LIBRARY.               *
NEVER CHANGE IT MANUALLY, PLEASE!                             *
FUNCTION $$UNIT$$ ZRS_TABLE_VIEW
         IMPORTING
               VALUE(TABNAME) LIKE !DATABROWSE-TABLENAME
           DEFAULT 'TFDIR'
         TABLES
               !FIELDTAB STRUCTURE !X031L OPTIONAL
               !INTTAB
         EXCEPTIONS
               !CANCELD
               !GENERATION_ERROR
         $$GLOBAL.
I assume that is a system generated include. The Global option in FM has automatically been copied during copy of the function group and the function module.
Thanks and regards,
AD

Copy of function group BBP_PDH_SEARCH

Hi,
time ago my project made a custom transaction BBPCF01 (copy of FG BBP_CF) in order to make modifications beyond customization limits. All worked perfectly even on web.
Now the user asked some modifications to the search system that go beyond customization, so we've been forced to make a copy of FG BBP_PDH_SEARCH; i also made a new ITS ZBBPSEARCH with the templates for the FG dynpros and a new service on the SICF. The new custom FG has been modified to our needs. On the gui side everything works, on the web we can't see anything but an error message "window.wgu_global_eventhandler is null or not a object"
Does anyone know what's happening here?
Thanks in advance!

Hi Francesco,
maybe the two following notes can give you some further information about the issue:
816973
710719
You might also find more help in the BC (-FES-GUI) forum, as I guess thats were the problem is situated at.
BR
Michael

Regarding function group copy

Hi,
can any one help me out in copying the function group V50S.
to my Zfunction group.....
i have copied but it was giving errors and not activated .
can any one help me out from this situation
Function group(V50S) ecc 6.0
Thanks in Advance.

Hi Siva ..
I am able to Copy and Activate .. These are the Steps. Check out.
Goto SE80
Select Fgroup V50S
RIGHT CLICK AND SELECT : copy
It will ask for New Function Module Name
For each FM give a New name starting with z_<name>
(Starting with Z_ OR Y_)
Then The ZFunction group will be displayed in the Left navigation window in SE80
Right click on the ZFunction group name and ACTIVATE
IT will show all the Function modules selected for Activation
Activate.
It gets activated.
Reward if Helpful

Copy Function Group to New Name: Transport Question

When I did this I only see in the transport Function Group with the Function Group Name under it. I would have expected to see all of the objects but I guess not?
I suppose everything will go under thge Function Group name? ie. Includes, Function Modules, etc.?
Thank-You.

When I see a thread title like this, the first question I think is "Why copy the function group".
Copying a complete function group leaves your system very open to future data corruption and other problems as patches etc change the code in the original group but do not get reflected in your copy. A repair or enhancement to the original object has the advantage that SPAU will highlight any new versions from SAP allowing you to confirm that your change is still needed.
Another option is to create a custom function that calls the standard code with customer specific pre and post processing. If both the standard and custom function are needed, then including logic based on transaction code, calling report, etc can handle this.
It is interesting to work on the upgrade of a system where there has been significant copying of SAP code - you compare the "Z" version with the original SAP code in the pre-upgrade system and nearly always find differences due to OSS notes etc that were applied without thinking of the customer copy.
Andrew

Copying Function group includes

Hi all,
I am facing problem while copying function group. I am copying the function group in SE80 transaction . while copying i am able to copy the function modules in it only . but i need to copy includes in the function group. because i need to edit the code inside the includes. while copying Function group standard includes are there in the Z function group.
Can any one help me out how to copy the includes also.
Thanks & regards
sreehari.p

Hi,
Transaction SE38 and copy object SAPL<FUGR> with all sub objects
<FUGR> = function group name
Regards,
Ivan

Reg copying function group

Hi All,
I want to copy the function group COISSELECT to ZCOISSELECT.I have done from SE80 transaction but the problem is I want to change some includes in this function group when I am copy it has been asked target function module names but it has not been asked the target include programs so I am not able to modify the includes in this function group.
Please some body suggest some idea how to do this?
Mahesh

Copy the includes separately in SE38.
Replace with the new include name in your FG where it is declared.
For eg:
INCLUDE ABC. "declaration in FG
This needs to be replaced with INCLUDE ZABC.
Automatically the FMs in the FG will start referring to the code in the new include.

Renaming a function in a function group

Hi,
I'm trying to rename a function in a function group, and I keep getting
Object components locked in request and separate task
It was decided the Function group should be called a different name, and so I copied the function group, and then copied all the functions with a new name.
Now in the original Function Group I want to rename the functions, so I can use the correct names in the new function group - or is there a faster way of renaming a function group?
Thanks

You are not able to rename original function group / modules because they are also locked in another task of same transport.
Goto SE09, give the transport no and see the details of transport.
There must be multiple tasks - may be some other developers are using same transport.
So you need to change task owner to your id and then rename fm . function group.
Pls make sure that you are not disturbing other developer's development as you all are sharing the transport.

Migrating a function group

hi gurus,
my requirement is to copy a function group from other box, is there any way to reproduced it to the target environment making it sure everything's intact?
thanks and thanks,
zryxel

Hi,
What you can do is create a TR for your function group. It genereates two files. Ask your basis to import these two files into the otherr box.
Regards,
Atish

Copy the function module

Hi,
can you suggest me how can i copy the function group.
for example:Zfun_01 having 10 objects and i need all the objects to Zfun_02 function group.
I tried from SE80 but I didnt get copied.
Thanks,
Sriiii.

Hi
Check the below thread the same issue is discussed
Re: Function-Group
Regards
Pavan

Copying function module from one function group to another

What is the efficient way to copy a module from one group to other so that all its subroutines and any dependencies with in the FM can also be copied?

Hello,
Tcode:SE37
Menu: FunctionModule->OtherFunctions->Copy in that there are different option give a new name of the function group this should work
regards
suresh nair

Copying of function group

Similar Messages

Maybe you are looking for