Copying of PAT file..

Dear SAP Guru's,
how to copy the PAT file to Z.PAT file...
here we want to copy the language fiel(>PAT ) file Z and store into one request..so please can any one help me out how to do the convertion the .PAT file to Z .PAT file..
Here we have one SAP NOTE: 981731.
Thanks and Regards,
GSANA

thanks keerthi,,
what i did, first i pasted pat file in trans/eps/in. now i used transaction saint . it said to click on continue... and i did...
some process is going on screen...
pls give me a b c of it....
regards.
Edited by: chinta on Dec 1, 2011 7:31 AM

Similar Messages

SMLT -- Czech Language Import -- .PAT files

Dear Support,
We are planning to import/add a new Czech Language into our ECC 60 system.
When I called the SMLT transaction to import the language from FrontEnd, the system is not finding the content from the CD 51033496_1. The CD has .PAT files instead of .sar or .car files.
I have also copied the .PAT file onto /usr/sap/trans/EPS/in, but still the SMLT tool is not finding the language content to import.
Could you please help me out with this issue?
Thank you,
Nikee

HI Nikee
check this SAP Nope , hope this will solve ur issue
Note 1254022 - SMLT: Language imports not displayed in EHP systems
SMLT displays only the languages for which the current (SAP Basis) release has been imported. This makes sense because otherwise, the system would also display the language imports for the previous release after an upgrade. The problem now occurs because the systems that have an Enhancement Package imported the same language packages as the systems that do not have an Enhancement Package even though the release is different. For example, the SAP Basis 7.00 language package is imported into an SAP Basis 7.01 system. Since the releases do not correspond, the system does not display the language package in SMLT.To correct the error, SMLT must recognize an Enhancement Package release and the release check for this must be configured in a more flexible way
Cheers
dEE

How do I copy and paste files from a windows remote server to my mac?

How can i copy and paste files from a remote server (windows) to my mac? i have installed cord to connect to the server but now i can´t cpy the files to my mac!

Hi Sara. Tanks for responding. If I cannot figure this out (I was up
until 2am last night), I want to cancel my subscription.
Here are two files you can check on/help me with. When I try again, it
comes up 'an error has occurred when trying to access the service.'
Please advise.
Pat Tomassi
In a message dated 11/1/2014 12:55:23 A.M. Eastern Daylight Time,
[email protected] writes:
How do I copy and paste text from a converted Word document?
created by Sara.Forsberg (https://forums.adobe.com/people/Sara.Forsberg)
in Adobe Acrobat.com Services - View the full discussion
(https://forums.adobe.com/message/6888908#6888908)

PAT file not shown in Support package manager

Hi All,
We had to create a custom BAPI to achieve an functionality in our product.
We are doing this for the first time.
As a standard procedure we followed the AAK (Assembly Add On ) toolkit to create the deploy-able.
Finally in the consolidation system we could see the following PAT file created in the out directory.
QA70020777848_0000002.PAT
I copied the file to the in directory of the production SAP server where this needs to be deployed.
I ran the transaction SPAM on the server.
Load packages from Application server
QA70020777848_0000002.PAT SAPK-170COINCOMPANY1 @EB\QUpload Already Occurred@ 0004 OCS file already exists in inbox. Upload not required.
IT decompresses the file properly.
Now the problem occurs ahead.
IF i click on the New Support package nothing is shown visible .
Am i missing any steps here.
Regards
Manoj

Got the solution in fact it's not a solution it's just an awareness on how the disks are available in fail-over cluster manager.
1) All the available disks are shown in fail-over cluster manager "storage".
2) While installation it asks us to add available disks for SQL Server then add accordingly. (Ex: E:drive for data files and L:drive for Log files)
3) Once the installation is done you see those disks in MSSQL (SQL Server) group.
Means when you click on Active node it should show you MSSQL (SQL Server) group in which you can find network name, network ip, E: & L: Drives, SQL Server and Agent services.
Note: MSDTC and Quorum are also clustered disks which can reside (Preferably Active Node) in any of the nodes but automatically fail-overs to active node in case of any passive node failures.
Regards,
Kalyan
Grateful to your time and support. Regards, Shiva

Can't copy and paste files using RDP session in server 2012

I'm running windows 8, but I have also verified on a windows 7 machine as well. We have server 2012 installed on a machine
I use remote desktop to get into. I cannot copy files from my local pc and use paste to get them to the server. I could do this with server 2008. Is there some setting I have to change or does this not work with server 2012?
FYI, clipboard is checked when I open my remote desktop connection window. If I connect into a win server 2008 r2 machine from the same local machine, I can copy and paste files
just fine.
- Michael

Hi,
I believe RDS clipboard redirection should be enabled by default also on Windows Server 2012. Is there perhaps is a Group Policy Object active that is configured to disable Clip Board Redirection? Either on the computer or the user OU. If not:
You did not explicitly state this, but I'm assuming that you are running in Application Mode (meaning you did not install the RD Session Host role) ? If so please check the registry on the Windows Server 2012 destination server and look for:
HKLM\SYSTEM\CurrentControlSet\Control\Terminal Server\Winstations\RDP-Tcp\fDisableClip
this should be set to
0, to make allow Clipboard Redirection
Also check the key below:
HKLM\SYSTEM\CurrentControlSet\Control\Terminal Server\Addins\Clip Redirector
This should have:
Name
REG_SZRDPClip
Type
REG_DWORD0x00000003
If you did run the RD Session Host role, and you have done so using a Scenario Based Deployment (Scenario
Based Deployment of RDS in Windows Server 2012 ) you will have a Remote Desktop Management Service GUI available as pat of the Server Manager with which you can enable or disable ClipBoard Redirection from within a GUI on a Session Collection level
or you can use PowerShell
Using Powershell to install, configure and maintain RDS in Windows Server 2012
Kind regards,
Freek Berson
The Microsoft Platform
Twitter
Linked-in
Wortell company website

Error 8062 when I try to copy or move files on my macbook: "This operation could not be completed because an unexpected error occurred (error code -8062)". Can even not install new software now!!

Since a few days when I try to copy or move files on my macbook, I often get an error message saying "This operation could not be completed because an unexpected error occured (error code -8062)". And then it just quits the copy or move.
I searched a lot on the internet, but only found solutions for cases you cannot empty the trash due to this issue.
I tried those solutions for my trash and that helped after some trying.
However, I still have the problem with copying and moving files.
I even cannot install new software now, as it has to copy itself to the programs-directory, and gives the same error-message.
Who can help me??
Cannot seem to find any info on it on the support-forums or elsewhere.
My user-account is administrator, I use a 13" Macbook Aluminium (Late 2008). Mac OS X 10.6.8 CPU 2Ghz Intel Core Duo, RAM: 4GB 1067 MHz DDR3.
Any help would be greatly appreciated...
Otto

Tips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
- make sure you have at least 10% of your harddisk in free space (I had only 5%).
- do a PRAM-reset (http://support.apple.com/kb/ht1379)
- perform a hardware test (http://support.apple.com/kb/HT1509)
- make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
- after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
So far I only cleared up some space on my HD, and already the problem occurs less.
Still, I will go through the other tips too.
(will post progress)

I backup my iphone on my pc and copy backup file into drive D then i setup new OS on my pc. after that i copy the backup file into itunes backup folder but itunes can't find the backup file to restore my iphone. how can i restore my iphone?

i backup my iphone on my pc and copy backup file into drive D then i setup new OS on my pc. after that i copy the backup file into itunes backup folder but itunes can't find the backup file to restore my iphone. how can i restore my iphone?

Don't you just love changes in interfaces?
I found the answer to my question.
When you attach a device (iPhone, iPad) to your Mac, in iTunes 12 in appears as a tiny icon in the second "row" of the iTunes display. Click the icon and the familiar iTunes display for the device appears. From there, on the Summary screen, you can see the dates of the backups of the device (iCloud and backup to the computer). You can also use the button to backup to the computer.

I can't get download to work - it will not copy the mp3 file to my chosen location (as set in tools/options) - it gives me a new window with a player - no dwnlo

I am running windows xp sp2 and I have set my dowload location under (tools/options), but when I select an MP3 file to download, firefox does NOT copy the file to my chosen location on my HD - instead, it opens up a new window with a makeshift "player" and begins loading the player with the MP3 file. The problem is that I have no idea where on my system firefox has copied this file to, so, I cannot leave and come back later and play this MP3 file using winamp. I have to listen to it right then or lose it - if I close that new window (with that puny little "player"), then I lose the download, wherever firefox put it on my PC (I got no idea where it is). This is all under firefox 25.0
I am also running FIrefox 12.0 on an older windows 2000 machine and that works perfectly - I can download any MP3 file I want, and firefox 12.0 (on win2k, sp4) downloads it to my chosen location (on my HD), and it gives me the download window so I can watch its progress and have some control over pause, and resume, and, when it is done, the download window offers me the option to "open containing folder" so I can make sure it got to where I wanted it. In other words, Firefox 12.0 on WIn2k, sp4 works better than firefox 25.0 on winxp sp2!!!!! What gives? I went through and set up my options for XP just like I did with Win2k and it all looks good, but firefox 25.0 just ignores my chosen location and always defaults to give me that makeshift player and I am not able to actually copy the mp3 file to my harddrive - it makes firerox 25.0 almost unusable since downloading mp3 files is a big part of my firexfox use - please help - I am not able to upgrade windows at this time, and, since firefox 12.0 still works fine on win2k, I can't understand what happened at firefox?

Phillipp,
I tried it again using "save link as", and this time it actually worked! I just now downloaded several more using the "save link as" option, and it works perfectly. Thanks. Problem solved.
Littleberry

HT2548 how do i copy the domain file from OS 10.4 to a lion OS computer? I made a copy of the domain file and copied it to my new computer, but it doesn't open in iweb when I double-click on it.

How do I import an iweb domain file from an ibook (OS 10.4) to an imac (OS 10.73)?
I copied the domain file from my ibook to my imac, but when I double-click on the file, it doesn't open in iweb.

In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder. Then place the domain file in your Users/Home/Library/Application Support/iWeb folder.
To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

How to Copy an Image File from a Folder to another Folder

i face the problem of copying an image file from a folder to another folder by coding. i not really know which method to use so i need some reference about it. hope to get reply soon, thx :)

Try this code. Make an object of this class and call
copyTo method.
import java.io.*;
import java.net.*;
import java.util.*;
public class FileUtil
extends File {
public FileUtil(String pathname) throws
NullPointerException {
super(pathname);
public void copyTo(File dest) throws Exception {
File parent = dest.getParentFile();
parent.mkdirs();
FileInputStream in = new FileInputStream(this); //
Open the source file
FileOutputStream out = new FileOutputStream(dest); //
Open the destination file
byte[] buffer = new byte[4096]; // Create an input
buffer
int bytes_read;
while ( (bytes_read = in.read(buffer)) != -1) { //
Keep reading until the end
out.write(buffer, 0, bytes_read);
in.close(); // Close the file
out.close(); // Close the file
This is poor object-oriented design. Use derivation only when you have to override methods -- this is just
a static utility method hiding here.

Time Machine only shows the current copy of the file I am trying to restore. There is none of the time machine backup histories shown. I am running OSX 10.7.5. I see the backup files on my external Time Machine hard drive. Help

Time Machine only shows the current copy of the file I am trying to restore. There is none of the time machine backup histories shown. I am running OSX 10.7.5. I see the backup files on my external Time Machine hard drive in the Backups.backupdb folder.
Time Machine does show the history of my Macintosh HD, but when I try to navigate to the folder I wish to restore the backup history disappears. I've been searching for answers and I have not found one that works for me.

Time Machine only shows the current copy of the file I am trying to restore. There is none of the time machine backup histories shown. I am running OSX 10.7.5. I see the backup files on my external Time Machine hard drive in the Backups.backupdb folder.
Time Machine does show the history of my Macintosh HD, but when I try to navigate to the folder I wish to restore the backup history disappears. I've been searching for answers and I have not found one that works for me.

Error 1003 occurred at Open VI Reference in Dist Copy Non-VI Files.vi- Dist Build LLB Image.vi- Dist Build App Image.vi- Build Application.vi

When trying to build an application using labview 7.1 and windows XP, I get the error
Error 1003 occurred at Open VI Reference in Dist Copy Non-VI Files.vi->Dist Build LLB Image.vi->Dist Build App Image.vi->Build Application.vi
I've tried the crtl-shift-run as well as a mass compile and I still get the error.
Any ideas?
Thanks,
Mike

Hopefully this thread, or this KB article might help.
It seems like this could come from a lot of things, but there's suggestions in those which might lead you in the right direction
Message Edited by Day on 09-22-2006 02:07 PM

How do I stop Dreamweaver from updating the Test server copy of a file when I open the local file?

The subject says it all. Every time I open a file, Dreamweaver connects to the testing server and uploads the local file to the test server.
I want to stop this behaviour. It's annoying!

My testing server is IIS running on my local machine.
The "local" copy of the file is actually on a remote share. I have the test server copy open in Notepad++. The two files are identical save for on extra line in the copy on the testing server. When I open the "local" copy in Dreamweaver, it shows me that some file activity is being done, and then Notepad++ tells me the file has changed and do I want to reload it. If I do, that extra line vanishes.
When I check the file activity log, it shows that the file activity is complete.
I haven't mentioned the production server because it doesn't seem to be affected, but we do have one.

Is a copy of .xml file on the iPod too? If so, how can I copy ONLY the .xml file to my computer and NOT have to copy all my music files too?

I had to re-load my OS (Windows XP Pro) from a HD snapshot via Acronis True Image Server. I save my OS on my C: drive and all my data files on my D: drive. So when I re-loaded my OS, I still have all of my music files intact.
I have re-loaded the OS before and had to re-create iTunes library which I did by doing the follwing:
1. cut & paste .xml file in iTunes folder to desktop
2. delete .itl file in iTunes folder
3. import .xml file through iTunes file>library>iport playlist
4. navigate to .xml file on desktop and import
This worked last time I re-loaded my OS but not this time for some reason.
So I'm wondering if there is a copy of the .xml file on the iPod itself in the iPod_Control folder that I can copy and paste to my comuter desktop and import via the above steps?
I have seen all kinds of solutions on the web that include copying the music files from the iPod to the computer. I don't need to do that. I have the music files. I just need the .xml file so iTunes can talk to my iPod (5th Generation - 30G).

Backup your music library, that is the only way to ensure it does not go missing through theft, damage, operator error, machine breaks, upgrades go wrong, operator goes wrong .........

Can I copy a Backup file from one PC to another and use it?

IPhone got all screwed up with the update on my home PC and wont restore, my PC at work does it fine, but my backup file is on my home PC. Can I copy my Backup file from my home PC and put it on my work PC to restore my IPhone?

Before your restoring your iPhone with your PC at work, you can create a backup of your iPhone on the PC before restoring.
With your iPhone connected and available in the iTunes source list, control click on your iPhone and select Back Up.

Copying of PAT file..

Similar Messages

Maybe you are looking for