Copying, Pasteing and Saving transitions....

Hello, is there a way to copy a set of transitions for a state or button etc. and then paste it to another or multiple states? I know that I can use smooth transitions, however I don't always like the results and it won't apply to some states. I need to make 25 buttons all do the same thing using a pretty complex set of transitions (in which smooth transitions ruins!) and I really don't want to rebuild it 25 times. Also is there a way to save a set of transitions for future use?

Unfortunately not currently. I have had the same issue in my projects as well. I know the team is aware of this pain point, so hopefully they can address it in a future build.
Chris

Similar Messages

How do I reinstall the edit button on my Firefox 4 toolbar; cut, copy, paste, and print?

I recently have been having problems with my Firefox 4 tool bars. Right now, the Edit icons are no longer on the tool bar, specifically Cut, Copy, Paste, and Print. If there were other Edit icons, they too are gone. All the other icons have remained.
I would appreciate it if you could advise me how to reinstall those specific icons.
Also recently, ALL my tool bars, and task and status bar disappeared. This was only in Firefox 4.0; IE 8 was not affected. Clicking F11 did not work. I could not function without them. Then, a short time later, they "automatically" reappeared. I have not idea of why the disappeared or reappeared.
Thank you for any help you can provide.
Sanford A. Berman

You can find the Copy, Paste, and Cut buttons next to Firefox > Edit (and in its sub menu) and in the regular Edit menu on the menu bar (press F10 if the menu bar is hidden).
The buttons next to Firefox > Edit are enabled if there is something to do with them, just like with the toolbar buttons.
You can find the Copy, Paste, and Cut toolbar buttons in the toolbar palette in the Customize window and drag them on a toolbar.
Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
*http://kb.mozillazine.org/Toolbar_customization
*https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing

Copy/paste and drag/drop not working in Mt. Lion

After two weeks of searching, I can not find the hangup which is causing my iMac 27" 10.8 to stop copy/paste and drag/drop following successfully doing the same shortly after startup. In Safe Mode, it doesn't happen, so I'm wondering how to track down this problem (extension?). I have to restart in order to get it functioning again after a short time of working. There has to be some kind of timing, like a program installed with a time limit which probably was forgotten in Lion and then reared its ugly head in Mt. Lion. Any suggestions for tracking this puppy? Or is there a program I could buy to do so?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

JList & cut/copy/paste and focus

I have a JFrame with a typical edit menu (cut/copy/paste) and also a JList. I have hooked up the menus such that cut copy paste 'do the right thing' in regards to the current selection of the JList. However, if the JList has focus and i keyboard ctrl-x for instance, it looks like the JList is grabbing and handling the cut, as opposed to my menu code. How do I get the JList to ignore the keyboard when it has focus, or do I install my handlers in the JList somehow?

Thanks for the response. This area really smells to me. Which I infer means i don't really understand this area, otherwise it wouldn't be so wretched.
For instance the default cut action on a JList, doesn't seem to do anything, while the copy works correctly.
So why would you ever use the default actions? I guess i can install my menu actions in the JList, just seems badly designed... so am i wrong?
import java.awt.*;
import javax.swing.*;
import javax.swing.table.*;
public class MyJListFrame extends JFrame
     public static void main(String[] args)
          MyJListFrame f = new MyJListFrame();
          f.setVisible(true);
     public MyJListFrame()
          Container cp = getContentPane();
          DefaultListModel dtm = new DefaultListModel()
          {{addElement("This");addElement("is");addElement("a");addElement("test");}};
          cp.add( new JList( dtm ));
          pack();
}

Office365 macbook air while copy paste and change font to tahoma forarded message remain with different fonts and size not accepting change

office365 macbook air while copy paste and change font to tahoma forarded message remain with different fonts and size not accepting change
mac yosemite
office365

Also here's the log before it happened. As you can see there is no activity from 9:48 to 10:00 am when the sound occurred.
23/02/2014 9:48:12.792 am ntpd[52]: FREQ state ignoring -0.145411 s
23/02/2014 9:48:15.258 am WindowServer[96]: _CGXHWCaptureWindowList: No capable active display found.
23/02/2014 9:48:20.000 am kernel[0]: AppleCamIn::systemWakeCall - messageType = 0xE0000280
23/02/2014 9:48:20.000 am kernel[0]: ARPT: 61.319378: AirPort_Brcm43xx::powerChange: System Sleep
23/02/2014 9:48:20.000 am kernel[0]: ARPT: 61.319390: wl0: powerChange: *** BONJOUR/MDNS OFFLOADS ARE NOT RUNNING.
23/02/2014 9:48:20.000 am kernel[0]: AppleCamIn::systemWakeCall - messageType = 0xE0000340
23/02/2014 10:00:04.000 am bootlog[0]: BOOT_TIME 1393167604 0
23/02/2014 10:00:06.000 am syslogd[17]: Configuration Notice:
ASL Module "com.apple.appstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
23/02/2014 10:00:06.000 am syslogd[17]: Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".

After installing Mt.Lion on my 27" iMac (2010), my copy/paste and move files would no longer function after a few minutes of use. I re-opened in Safe Mode and found everything okay, so I was told it was a bad extension. Now what do I do?

I have tried to look for an extension like Air Print Activator, which I tried and ignored. I thought it might have some timing method that would stop my copying and pasting and moving files after a minutes ot two. So I re-installed the latest version and "uninstalled" it, hoping it would then remove an errant extension. But that didn't help. It seemed to start when I first tried out Mail and moving new emails into their mailboxes after reading. I tried to figure out how to do a Clean Install, too, but it would not allow me to "move" the InstallESD.dmg to a USB disk, "resource busy". Everyway I turn, I'm blocked from carrying out a method of finding the culprit, short of starting from scratch -- but losing years and years of mail, files, receipts, etc. It's just too much to sacrifice. I have no idea what to do next, since I have no idea what extension is causing it or how to isolate and destroy it. Any suggestion would be much appreciated.

You can try repairing the boot drive, Since you are running OS 10.6.8 you will need the OS DVD. Do you have it?
Please post back if you do, and need directions on how to do the disk repair.

I am working in windows 7 and I am trying to enable the copy/paste and I can not find user.j file in the profile and I am not real sure how to create a file, I can create a folder .

I am trying to copy text from a word document and paste it into my web builder and it says that firefox does not support copy/paste from clipboard. Went to your site and it tells me to open the user.j file in my profile. This file does not exist and I am not real sure how to create that file so I can paste the fix from your site into it.

I went to that link and added to firefox add on but it still does not work. I went to the add on option button for this but it told me that my MYSIWG widget was disabled. Does this have something to do with it not working and if so how do you enable it.

Why can't i Cut items and paste them? I have to copy Paste and delete them?

Why can't i cut items (ctl + x) on my Macbook air? I always have to copy item from original location to location where i want to paste and del

Are you talking about cut/paste within an application (i.e.: Word, Textedit) or Finder? (i.e.: cut/move file to folder or external hard drive.) Finder doesn't have cut, just copy. As to why, you'd have to ask Apple.

Copy, Paste and Text Formatting

If I copy text from another application, then paste it into a
Fireworks textbox, it replaces the Fireworks formatting with the
formatting from the previous application. I'm looking for something
along the lines of the "paste and match style" function found in
most Apple programs. Also, if I copy text *from* Fireworks, then
paste it into another application, it shows up as an image, not
text.
Any way around these problems? (At least they're problems for
me.)
I've been using FW since it was originally released, and I
don't recall these problems in previous versions. I don't have any
earlier versions installed, however, so I can't be sure.

cault wrote:
> Also, if I copy text
> *from* Fireworks, then paste it into another
application, it shows up as an
> image, not text.
Open the text in the text editor (Text > Editor) and copy
and paste it
from there. You can also paste text into the text editor to
remove
formatting from other software.
Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
http://www.adobe.com/communities/experts/

Copy Paste and dialer

As a suggestion, if anybody who makes a difference actually reads these posts, would be to allow copy/paste functionality to work in the dialer application. This would allow us to paste phone numbers and conference codes rather than trying to remember them from our calendar/email apps to the dialer.

Click here and fill out the form.
(44695)

How can I copy, paste and edit a phone number?

If I copy a phone number then paste it, how can I edit the pasted number?
For example, my phone has an Irish SIM. If I am in the UK and copy a UK phone number from an email signature it will typically be in local format i.e. 0208 456 7890. I need to dial 00 44 208 456 7890. I cannot find a way to delete the zero prefix and add the country code.

This one kills me as well - editing phone numbers in the keypad/dialer is a pretty basic function, I could never fathom why it didn't exist. We need to be able to place a cursor, and copy/paste part-numbers! I'm constantly trying to paste just an area code, or an extension, or insert the country code, and I should not need to create a new number in the contact directory to do it!
Currently I do the copy/paste editing in Notes, and then paste the corrected number into the dialer - pointless and inefficient, and contrary to the Apple philosophy of making the user experience easy and seamless...

How can I copy, paste, and email a web site page?

Hello. Basic Safari question: How can I Copy, then paste, web site content from Safari, into a document (ie. Powerpoint Presentation)? I am interested in copying / pasting so that the content in the document looks (formatted) identical to the content on the web site?
Thanks!
KD
ps. R.I.P. S.J.

This one kills me as well - editing phone numbers in the keypad/dialer is a pretty basic function, I could never fathom why it didn't exist. We need to be able to place a cursor, and copy/paste part-numbers! I'm constantly trying to paste just an area code, or an extension, or insert the country code, and I should not need to create a new number in the contact directory to do it!
Currently I do the copy/paste editing in Notes, and then paste the corrected number into the dialer - pointless and inefficient, and contrary to the Apple philosophy of making the user experience easy and seamless...

Copying, pasting and editing audio problem?

hi, i have some audio tracks that i originally recorded in pro tools le
(no plugin delay compensation if using uad's or other 3rd party plugs dont even go there by the way)
and have exported them to logic 8 and changed the arrangment for a song.
The problem is when i cut and paste sections of an audio track to a different part of the song, if i trim, cut, mute or pull it back it changes the part of the audio that i originally pasted it from?
how do i stop this from happening?
can anyone help
thanks

Once you've copied/pasted the new region to where you want it, select the new region and press:
OptionCmdF
You will then be prompted to give a new filename for the audio file. This generates a new file, which can be edited separately from the original.

Copy-pasting and lifting audio between projects--no playback

Hello everyone,
Every time I copy paste or lift audio from one project to another (i.e. copy, save project 1, close, open project 2, paste), the audio works fine for that session but ceases to play back when I reopen the project later. The audio in the project media / clip selection area will work just fine, but when I double-click on the clip I pasted in the timeline, the clip preview window shows a red field and no audio. This basically means that I'm losing all the edits I made in project 1 and having to re-insert each piece of audio into the project 2 timeline and redo my edits. What's the problem? Is there any way I can copy-paste audio from one project timeline to another?
(Edit:) I'm using CS6.
Thanks very much,
Josh
Message was edited by: jmclaurin14

It wont work that way because you are playing it out of the Clipboard. which is temporary.
Usemultiple Sequences in the same Project instead if you want to do that. to different edits

Copy/paste and keyboard question...

1) Is there a way to adjust my imac so that when I copy/paste something it stays where the cursor is?
I do a lot of copying and I use a colon, then skip two spaces and when I paste my selection, it skips back those two spaces after the colon. It's frustrating because I then have to go back and space two times.
I've never had an issue with this in windows, so maybe something in my settings isn't set correctly?
2) Is there a way to set my keyboard up to have a forward delete button? Right now if I hit delete it is really backspace, like the left arrrow in windows. If I hit fn and delete at the same time it does the forward delete, but I'd like to do this in one button, is it possible?

Manigeh wrote:
When I copy and paste, I'm using the mouse.
Yeah, I definitely need to do some reading. Still shocked though how difficult simple things are so different in mac vs. windows. For one, I really miss my print screen/screenshot button.
If you have not already done so, check out KB Article: http://support.apple.com/kb/HT5775

Copying, Pasteing and Saving transitions....

Similar Messages

Maybe you are looking for