Copying personalization

Hello Everyone,
I'm curious if there is a way to copy personalization from one iView to the other. In my particular case, I am modifying ESS Address iViews using the WD Personalization feature available in EP since SP10. The problem is that within ESS every country has its very own iView and I would thus have to maintain each country's personalization individually (very time consuming!). I was wondering if anyone knows if I can somehow maintain this personalization in one iView and then "copy" it to all the rest? Thanks in advance!
E.

http://help.sap.com/saphelp_nw70/helpdata/en/9e/7d96c7087311d7b84600047582c9f7/frameset.htm
In this link check
Copy -> Paste as Delta Link
regards
pankaj

Similar Messages

How can we copy personalization from one to an othere resp/function

guys,
As we use people and maintain function to maintain employee information, in this function we have made personalization and working fine, but after restricting function which is appearing on others button like (absence, qualification, previous employer) etc, then we need to create task flow node and configure with new function as copy people function.however, the personalization which was attached People window one is working but new function of people window have without personalization.
So therefore i want to copy all this previous function personalization into new function,
Could you please advice to achive this.
--thanks

Just to clarify what you're after, can you confirm that these assumptions are correct:
1) You're not talking about OA Framework personalization on any SSHR page
2) You are referring to the Combined Person and Assignment Form (PERWSHRG) under *HRMS Manager > People > Enter & Maintain
3) You're not talking about Forms Personalization (Help > Diagnostics > Custom Code > Personalize)
4) You are talking about custom Task Flow definitions
Do you want to copy the Task Flows and Upload? You can use a command like this to upload/download task flows. This is an example of downloading/uploading task flow nodes:
1) Submit Processes and Reports > Download HRMS Taskflows
2) Run this FNDLOAD command:
FNDLOAD apps/<apps_pw> 0 Y DOWNLOAD $PER_TOP/patch/115/import/hrwfunit.lct nav_units.ldt HR_NAVIGATION_UNITS
3) Upload:
FNDLOAD apps/<apps_pw> 0 Y UPLOAD $PER_TOP/patch/115/import/hrwfunit.lct nav_units.ldt
If you simply want your copied Function to use the same Task Flow just check it's got the same Form Parameters as the original function definition.
If this doesn't help, please clarify your requirement further.

How to copy personalizations of a responsibility to another responsibility

Hi All,
I have done OAF Personalization at responsibility level for one responsibility. The same personalization is to be done for 60 more responsibilities. Please guide me on following points:
1. How to copy the same personalization to other responsibilities?
2. How to import the personalizations to application?
3. How to migrate the personalizations on another instance?
Thanks,
Regards,
Abdul

Abdul,
Use the Functional Administrator to get the XML files for the Personalizations. If you notice you would observe that for a particular file with path:
oracle/apps/ap/abc/webui/XXPG
the personalization xml wd be created as
oracle/apps/ap/abc/customization/responsibility/12345/webui/XXPG (where 12345 is the responsibility Id).
You would need to create 60 such copies with 60 different responsibility Ids. Also in the actual XML document you would need to update the responsibility key for each responsibility individually.
As a suggestion why dont you do your personalizations at the site level itself. For those responsibilities where you dont need this (assuming that is lesser in number) you personalize again so that the site level personalizations dont take effect.
regards
Sumit

URGENT:Copying Personalizations from Site Level to Responsibility Level

Hi All,
We have created quite a many Personalizations at the Site level for our Instance. Now we release that if we have them created at the responsibility level we would have more flexibility.
Can any of you let me know in case , there is any way to move the personalizations created at the site level to Responsibility level?
Thanks,
Priya

Hi Mani / Anil,
Thanks for your responses.
I copied the site level personalization Tags from the site level xml document and put it in the Responsibility level document and removed those personalizations from site level as well and it is workign fine.
Just I have one more question to this. Going forward how do I create the items ( Create Personalized Items) at the Responsibility level.
B'coz when I create a Stack Layout Item , I can only create it at site level. But if I want this to be available only to some Resposinbilities and not to all then how do I do it?
Thanks,
Priya

Personalization and Default values in selection screen variables

Hi everyone,
I have certain questions regarding Front end part:-
1)     Can we have multiple personalizations for a single user in Web templates; I know it is quite possible in BEx using Variants. Is there any such approach or any other solutions regarding it?
2)     In our project we had a range selection screen customer exit variable on 0CALMONTH, which is showing a default value of 07.2007 to 09.2007, although we have removed the default values from the query variable and also checked the customer exits where it is used, but still its showing the value. We cant delete and recreate the variable as such, as it is used in number of function module. Also these values are also transported to Quality system, where also its showing the same value.
Did anyone face such a situation before?
Eagerly waiting for a solution.....
Thanks in advance

Hi Chiran,
Please try with following approach for multiple   personalizations for a single user in Web templates.
While Defining Variable Choose the Option Copy personalization data from variable .
The Features of above approach is as follows.
1)It will personalize variable values for Input Variables for each user.
2)These values are saved for each variable as well as for user.
3) At the time of defining variable it will allow us to enter one or more default values.All these values are appear in the variable screen when u execute the query or Web Application.
So you can see the variable values in web also.Just try with this approach.
May be it will resove u r issue some extent.
Regarding u r Second Query Just try with Some tables, all the default values entries were saved in those tables. Delete default values from those entries.
Thanks & Regards,
Chandu.

Key date based reporting on DSO

Hello Gurus,
Scenario: DSO has valid to and valid from fields. Doesnt have any other time periods. I want to run a report, where in user enters a certain date and data relevant to the range in which the date lies should be reported. I am trying some options at the front end, but havent been able to get the desired results.
Any pointers?
Thanks, points will be awarded.
Prakash

Hi Prakash,
Create a variable which is characteristic variable, ready for input for valid from (say var1). Create a variable(var2) for valid to which is replacement path, and has a reference to the var1(in the "copy personalization data from" option in the replacement path tab). Now in the filters create a restcition as "valid from" <= var1 and another one as "valid to" >=var2.
Since only var1 is ready for input and var2 derives its value from var1, you will get only one prompt.
Let me know if it works.
Hope this helps...

Two querys in Web Application designer

Hi,
I have two querys in a Web Application desigern.
Query A has a variable A, which should be filled by user.
Query B has a Variable B, which is depend on the value of the variable A and should be filled in the background.
how can I realize this requirement.
thanks and best regards

Hi, Can you share us more specifics? I beleive both your query have the same type of Charateristic on which the Web report is generated. Consider using a common variable; If not so (i.e. entirely different char types), else if your requirement is to pass complete variable's data from one variable to another, you may try using exits; or better approach use any RRI functionality to pass variables from one query to another based on an event (say button click) in WAD. If you are not interested in either cases, say you want part of the data to be transferred? Like say, user enters 09.2009 & in Variable 2 you need only 2009? If you need such an approach; one: use simple option titled 'Copy Personalization Data from This Variable' under Defaults tab of the variable. Use some offset limitations incase you need to limit the data part using replacement path. Keep the variable optional for input. If you want to use the same personalization data in more than one variable, in the input field, specify the names of the variables under which the personalization data is stored. If not okay, then you may consider using customer exit varaibles. Thanks!

Light Framework -- Portal theme

Hi,
I am facing one peculiar problem. I have copied Personalize workset from Content Provided by SAP to my folder.
Created one role Personal and assigned Personalize workset to it.
Created Theme MyTheme using Portal Display -> Theme Editor.
Now i have created two Desktops.
1) Default desktops -> Default framework-> assigned MyTheme.
2) Light Desktop -> Light Frame work -> assigned MyTheme.
Assigned Default Desktop and Personal role to USER1 -> User can aceess Pesonalize Link -> Portal theme Here he can see all themes assigned to that framework.
Assigned Light Desktop and Personal role to USER2 -> User can access Pesonalize Link -> Portal theme. But here it doesnot display any portal themes.
For Light weight Framework do we have to create Themes differently.
I dont want to assign EU_ROLE
Thanks

Hi,
When you open your Light Desktop, do you see the themes assigned to it?
You should assign all themes to your Light Desktop that you want to be shown in Pesonalize Link.
So just compare Light Desktop and Default Desktop to see the difference. You should add all themes to Light desktop but you will only be able to set one theme as default.
Regards,
Praveen Gudapati

Form Personalization is not working for copied Sales Orders

Hi All,
We have a requirement in Sales Order form, if the order type is "Standard" then Ship method field should be mandatory.
We were able to do this using below form personalization, it is working for new order creation.
When we did the below testing it is not working
Inactivated the ship method and try to copy the order with Standard type the field remains mandatory and null but still it is allowing to book the Sales Order.
Please help to sort out this issue, let me know if it is not clear
Condition
Trigger Event : WHEN-NEW-ITEM-INSTANCE
Trigger Object: ORDER.SOLD_TO
Condition:
(:ORDER.ORDER_TYPE not like '%STANDARD%')
Action
Type : Property
Object Type : Item
Target Object : ORDER.SHIPPING_METHOD
Property Name: REQUIRED
Value: True
Thanks,
CSK

Hi CSK,
try it in well validate item trigger.
If that order type is list then you may disable the field in WHEN LIST CHANGED trigger itself.
Hope it will work,
Regards,
Soofi

Error: "Please personalize your copy..." when I start IDCS2 on Mac

I am now using Creative Suite 2 Standard.
There is an error message Please personalize your copy..." when I tried to open the Indesign cs2 but the Photoshop cs2 can work.
After I tried to remove and reinstall whole CS2 standard, I still get the error message.
Does anyone help me to solve this problem?
Thank you.
Here is the configurations of my Mac:
Dual 2.0 PowerPC G5
Mac os 10.4.11
2.5GB DDR2 RAM

Yes, but it is the solution only for PC, not for Mac.
http://kb.adobe.com/selfservice/viewContent.do?externalId=331649

Personalize your copy of Microsoft Office %username%

Hi gang,
I'm building an image using the MDT 2013 with Windows 8.1 and "Office Pro plus 2013" and Office 2013 doesn't seems to be recognizing the variable %username% to add the username "Personalize your copy of Microsoft Office "
what it shows now it's User name : %username%
I'm also using the OCT to customize the Office 2013 MSP file.
This used to work with "Office 2007" on "windows 7".
Mario
Statcan

Hi,
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Regards,
Ethan Hua
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

IProcurement Personalization Copy Category

Hello,
I am looking for a way to copy the category field from a Catalog Request to a Non-Catalog Request. Does anyone know how to do this?
Thanks

hi'
I am not sure what exactly you want to achieve...Have you checked the Non Catalog Req Template functionality.
Regds
ravisankar

Copied layout is not working for Sales order item assinment block

Hi Experts,
I copied the standard componet BT115IT_SLS/items view layout with custom role configuration key and worked fine.
I have added one more field to the item view with the same configuration and saved .When I opended the sales order in the WEB UI , The item assigment block is displaying with complete BTADMINI context fileds and This is the issue.
I have seen configured fields only in the personalization and I have downloaded the items assigment block data to Execl.In the Execl sheet I can able to see the configured fields (availble fileds in the configuration tab in component workbemch) data only.
But Items assignment block is displaying all the fileds (taking from the context node BTADMINI).
I have deleted existing customer configuration and again copied from the standard layout.But I got the same issue.
I have wriiten some code in the ON_NEW_FOCUS and commented the code.Still it not working.
Please help me , where I have done the mistake and provide me some inputs.
Thanks,
Venkky

Hi Experts,
Solved isuues myself.
The problem is inconsistency of BTAdminI context node . I have deleted the view enhancement and again enhanced the view .I copied the layout with customer role key and dispalyed expected layout.
Thanks,
Venkky

How can I get a new copy of the Voicemail app for my LG Spectrum?

How can I get a new copy of the Voicemail app for my LG Spectrum? It no longer works....the screen say Loading please wait....the
!Visual Voice Mail - A Visual Voice Mail error has occurred. Please try again. OK I've tryed several times with the same message. I've
deleted the app from my screen and replaced it from the Apps Library....still the same message.
I cannot find an answer on MyVerizon. Any ideas?
Thank you,
Dee

OK, at least 3 is working.
I don't know how you have a Tape Recorder icon on your Home Screen. I cannot add one myself. But, I am running Holo Launcher in replacement of the default LG "Optimus" User Interface. It's much better in my opinion.
Try long pressing the icon and select Edit and maybe you can change some attribute of the icon.
Another thing you could do, is long-press an empty area of your desktop, to add an icon. Select Shortcut, then Select Contact, and scroll through your contact list and choose the contact that you added for *86.
You realize if you have voice mail you haven't heard, there is a tape recorder icon in the notification bar, which you touch and pull down, then press it to dial voicemail.
If that functionality doesn't work, you MIGHT want to consider doing a factory data reset on your device, but that is going to nuke all your personalizations and cause you work to set up again.

Get the Value copy from Header feild to Line feild through Persnalization

Hi,
I have one requirement.
I have a field in Header level. When I have assigned some value to that field in header level at the same time the same field at line level also has the same value and when I Query the form and changed some value on that field then also the line level field will also changed. How can I achieve that through Form Personalization.
Any help is appreciated...
Thanks in Advance.
Nihar

If you're string can be modified, why are you using a String? String being immutable whenever the string gets modified, it will generate a copy string as well.
How many of the String's capabilities, you may be better off using a char array and modifying it manually. I haven't tested it, but the following code should work if you just need to append to the string.
public CustomString {
char[] data;
public CustomString(String in) {
this(in.toCharArray());
public CustomString(char[] in) {
data = in;
public void append(String a) {
append(a.toCharArray());
public void append(char[] a) {
char[] tmp = new char[data.length+a.length];
System.arraycopy(data, 0, tmp, 0, data.length);
System.arraycopy(a, 0, tmp, data.length, a.length);
data = tmp;
public char[] get() {
return data;

Copying personalization

Similar Messages

Maybe you are looking for