Copying positions in PPOME gives an error (5A293)

When copying a position in PPOME we get the error message Relation S A 031 Q cannot be maintained via basic transaction (5A293).
I have tried to allowe maintenance for infotype 1000, 1001 and 1002 fore OT Q and QK in tabel T777I without succes.
Can anyone suggest another method to make copying possible?
Br, Anette

Ok I hit this bug:
https://bugs.archlinux.org/task/18768?o … 237&status[0]=
I had to install pygobject and now it works fine. It wasn't installed or suggested by pacman when I did install hplip.
Pitou!

Similar Messages

Error while Copy Position

Hello All,
I have recd a strange error while coping the position through PPOSE/PPOME.
They have made some deveploments in the client system.
When ever one creates the positions in the above with the above 2 transactions, the system first asks for MOLGA i.e country grping.
i.e 1) select any postiton
    2) click on copy position
    3) system gives pop up to enter the "Molga" for that particular country in which you are creating psotions.
In our org structure, it is divided on Geographical areas. i.e asia pacific, Latin America etc.
eg: I wanted to create positon for malaysia area, i need to select Molga as 14.
4) once we enter the molga, the system throws an Error with Green tick mark " Error during copying. The action has been interrupted"
though its a green tick mark error, the system doesnt move further.
Ideally in IDES we can copy a positon.
We try to debug the transaction but couldnt find anything imp.
Is this a config setting in backend? Please advice.
Thx & regds,
Nithi

Hi Ram,
please check, if the note 1396300 is implemented in your system?
If so, check the table T777F.
It should have the following entries:
MANDT ISTAT INFTY FCODE
002   1     ****   AEND
002   1     ****   COP
002   1     ****   CUTI
002   1     ****   DEL
002   1     ****   DISP
002   1     ****   INSE
002   1     ****   LISD
002   1     ****   PLVO
In case these entries are missing, please do an adjustment with your 000-client.
Hope this help
Sarah

Error message while copying a position in PPOME

Hi,
I get the following error message when trying to copy a position in PPOME
Error during copying. The action has been interrupted.
Message no. 5A505
Any ideas what might cause this?
Regards,
Francois

Hi Francois,
I have found a note that might help solve your issue
1037901 Error during copying in transaction PPOME
1104954 PPOME: Error 5A 505 when copying objects
other customers had similar issue in their user exit, check if you have set up one.
Hope this help
Sarah

HR 4.6C - OM: Copying positions - Use of PPOME

Hello,
I am supporting SAP HR (OM/COMP/PA)and I am looking for alternative to The transaction PPOME that will allow user to copy positions. If there is not such transaction are there ways to restrict something such as PPOME so that they could only copy positions.
Thanks in Advance,
Mike

This is somewhat speculative with respect to PPOME but you should be able to set up authorizations using authorization object PLOG so that a user can see all the objects available in PPOME but can only create positions.

Hi Trying to download CS5 Design Premium. We have a copy on the Mac and want to put a second copy on the Macbook pro. Can download the file but when it is clicked the file give an error message "User access denied" and dumps the download. So hence I do no

Hi Trying to download CS5 Design Premium. We have a copy on the Mac and want to put a second copy on the Macbook pro. Can download the file but when it is clicked the file give an error message "User access denied" and dumps the download. So hence I do not get an installation screen or a chance to enter the Licence no.

Use another browser.
Mylenium

Copying a function group gives error

Dear All,
I am copying a function a group JV05. I have copied evrything i.e all the includes, TOP etc. But when i activate the group it gives me error. What could be the problem? I have tried to activate the includes & TOP individually. Still it gives error for some variables. Please help me out.
Thanks in advance!
Regards,
Prasad

hi ,
**Go to se80..**
**1. Select function group**
**2. Enter JV05 as name "-----> click on spectacles button.**
**3. Right click on JV05**
**4. Select copy "--------> give a Zfunction group name**
**5. "Copy all the function modules in this function group with zfunctionmodules.**
**6. Save & Activate.**
Regards,

I am from russia and i cant understand why my iphone 4g(black) can not sync..The computer gives an error saying that the synchronization can not be executed because you can not save a copy ... What should I do?

I am from russia and i cant understand why my iphone 4g(black) can not sync..The computer gives an error saying that the synchronization can not be executed because you can not save a copy ... What should I do?

Hey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David

Photoshop gives "Program Error" when I try to open files while VPN

I think this may be a new one. While VPN on my company network, Photoshop CS cannot open any files. Either drag and drop, double click or even file open command. You get the clock and the message "failed to open because of a Program Error.... " or something close to that. I'm sure it says Program Error though. Works fine if I'm not VPN but soon as I'm on it stops opening files or even creating a new blank canvas gives that error. I checked Adobe forum and nothing there to find about this one. Anyone else have this happen?

Hi, SSI.
1. What VPN client are you using?
As a guess, your VPN client may be blocking a port that PS CS may use for license verification over the Internet. The fact that it works AOK when not using the VPN would tend to support this hypothesis. As to what port it may be attempting to use, I can't say, but you may be able to find this out from Adobe and then work with your firm's networking staff to see if this port can be opened for use when the VPN is active.
2. You noted that you "checked Adobe forum and nothing there to find about this one." Did you post to the Adobe Photoshop forum? If not, I recommend doing so.
3. You wrote: "You get the clock and the message "failed to open because of a Program Error.... " or something close to that. I'm sure it says Program Error though."As FYI, in cases such as this, copying down the exact text of the message is helpful.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

My 3.6.14 keeps trying to update and gives this error message:"The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again."

My OS is Windows XP version service pack 3. I even tried to install FF4 but it never get installed. As I mentioned my FF keeps trying to update itself but it gives the error message I provided in title. Now I don't have access to my FF browser and my life is stopped because I have all my passwords saved on FF. I restarted my notebook but it stills try to update itself giving the same error message. I can not also upgrade my Adobe reader 7.0.7 to 10 I have tried more than 10 times but it never gets upgraded. I had this Adobe problem since long time ago.

Run the Firefox program once as Administrator (right-click: Run as Administrator).<br />
If that doesn't help then do a clean reinstall.
Do a clean (re-)install:
* Download a fresh Firefox copy and save the file to the desktop.
* http://www.mozilla.com/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

MS Word: This file is read-only. To save a copy, click OK, and give the document a new name in the save dialog box.

This is not a question. I believe I've found a new issue and the fix for it.
The situation:
A brand new iMac 27" running Yosemite 10.10.1
MacMini server running 10.8.5 server.
The issue:
Client on iMac trying to work on MS Word documents stored on server was requiring him to save the documents to his desktop and then copy them back to the folder on the server. The exact error message was, "This file is read-only. To save a copy, click OK, and give the document a new name in the save dialog box."
The issue is unique to this computer in an office of 10 client computers and three servers.
Attempted fixes:
Verified that the ".Temporaryitems" folder existed and the permissions were set properly.
Repaired permissions on the client and the network share.
Definitive fix:
By default, Yosemite 10.10.1 uses SMB for connecting file shares. When I overrode the default and switched to AFP protocol, the issue went away.
I hope this helps someone else.
Rob

That was it. What an operating system. It is very helpful to view files you are looking for. But if you have preview on you cannot save files.

When I try to start my macbook it gives an error of Please restart your computer, but when i do this i get the same error.

When I try to start my macbook it gives an error of Please restart your computer, but when i do this i get the same error. This occured after my macbook pro shut down (because of low battery) while it was installing some updates. Please Help?

Try reinstalling OS X. What version did you have installed? If it's Snow Leopard do this:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

Not able to create new position in PPOME

Positions are getting created but it is showing as already a person (Holder)and PA/PSA/Co.Code are assigned to that position.
Can someone pl

Hi,
when copying objects in PPOME it is possible to exclude some infotypes from the action. It seems in your case you are not excluding infotype 1001 A008, so the holder relationship is also copied. The infotypes that are excluded per standard are maintained in customizing table T77ITEX. There, in my system I have an entry for object S infotype 1001 and subtype A008. Check if you have that in your system. In case you want to exlcude infotypes from the copy, there is also a customer table T77ITEX_C.
Regards,
Ana

ITunes library consolidation error: "Copying files failed. An unknown error occurred (-50)."

My iTunes library has outgrown the HDD on my iMac, so I've started to migrate it over to a Synology NAS. The iTunes Media folder is set to the NAS, but when I attempt to consolidate the library the operation fails each time with the error: "Copying files failed. An unknown error occurred (-50).
I have found this references to this error in the communities from Windows users, but I only use Macs.

Just trying to give this topic a poke as I am having a similar issue.
I am rebuilding my library that was on an external drive. I had a backup of much of the files, but not a direct backup of the iTunes media folder, as well I am now moving it to a new iTunes Media directory on a Synology 1813+ NAS running DSM 4.3 vs. a USB attached drive.
I have followed all of the correct procedures to move the media directory by using the tools within iTunes, and that all worked perfectly.
So far iTunes has been able to locate most of the music files through its own processes. Once it completed that process I then initiated "Consolidate files" to move the found files to the new iTunes Media directory on the new NAS.
I am led to believe that the issue is with a specific file that causes the copy process to stop, but I don't know how to capture what file it might be.
I am not seeing anything relevent in the console log.
Hoping someone can throw me some ideas...
iTunes 11.1.2 (32) - iMac 2.8GHz Intel Core 2 Duo 4GB RAM - OS X 10.8.5

Consistently does not open, gives the error: "C:\Program Files (x86)\Mozilla\firefox.exe Windows cannot access the specified device, path, or file. You may no

Installed FF 16, 17, 18. Will not open in normal administrator login, nor with "Run as administrator" but will in W7 safe mode. Changed permissions (had to do it in W7 Safe Mode, normal login would not allow (logged in as an administrator) could not delete the Mozilla files in normal login. On rare occasions, with a new install, I could get it to open once, then not again. Searched the reg for any mention of Mozilla or FF and cleaned it. Tried FF safe mode, no luck. Checked permissions after taking ownership and propagating full ownership rights to all FF files, many reboots, no luck. Chrome, IE and SeaMonkey work fine. Using a fairly new install of W7 Professional 64 bit, on a Dell Optiplex 990 i7, 16GB ram. Had the same problem with another user on an identical box. No problem on other computers No other program problems.

I should have been a bit more definitive.
I have uninstalled FF, with the windows uninstaller, by manually cleaning the files and the registry of any mention of FF or Mozilla, and by running Revo uninstaller - always rebooting and checking to see if the files are indeed gone. (I have set windows file preferences to see all files, including system files.) I have run 4 AV/malware scanners and found nothing but a few tracking cookies. I download, from Mozilla.org, (http://download.cdn.mozilla.net/pub/mozilla.org/firefox/releases/18.0/win32/en-US/Firefox%20Setup%2018.0.exe) a fresh copy of the Firefox Setup 18.0.exe each time and install when logged in as an administrator and choose "Run as Administrator". I get the same result each time I try to open Firefox. Consistently does not open, gives the error: "C:\Program Files (x86)\Mozilla\firefox.exe Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item." This happens even when I run the .exe file from the x86 program directory. I have also attempted to run in XPsp3 compatibility mode to no avail,
I make the following assumptions:
The system is not infected
I am doing clean installs
There is no existing trace of FF on the system
I get identical results on one other W7 64 bit Optiplex 990 system with an i7 processor and 16 GB or ram.
I CAN run in windows safe mode with networking.
I have no other software or hardware issues.

There was an error while copying to Clipboard. An internal error occurred.

Hello
I'm running a Citrix Presentation Server 4.5 environment, based on Windows Server2003 and providing Adobe Reader as a published application (this issue appears with Adobe Reader 7 and Adobe Reader 8 equally).
Sometimes when trying to copy test from a pdf document, the error message "There was an error while copying to Clipboard. An internal error occurred." appears. The selected text is still copied to the clipboard, so the message seems to be more of a warning, but it's confusing for the end-users. This happens equally when copying via 'Ctrl-C' or with the mouse (right-click & copy).
It is not a problem with the document itself since sometimes the error appears and sometimes not on the same document. This happens for all documents I've tried so far.
Additional information: On the servers also MS Office 2003 SP3 is installed. I have the feeling that it may be an interference with the Office Clipboard, but I can't put my finger on it...
Please, has anyone found a solution for this?
Thanks
Andy

in windows 7
start-control panel-uninstall programs
uninstall the "Skype Click to Call", this will uninstall addins from ie, firefox, you dont have to uninstall skype.
in ie and firefox you can disable addons but can not uninstall them using ie or firefox interface, when you uninstall Skype Click to Call, it will remove it from all added browsers.
This works me now.
Edit 1:
Unfortunately skype trick does not work.
I recently switched to windows 8 and reliazed that there is no copy error any more.
Edit2:
This error maybe caused by Babylon dictionary which has an Adobe Acrobat or Reader addon which captures the text from pdf documnet when ctrl+right mouse click. This feature is enabled when it is copied to" C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\plug_ins " or "C:\Program Files (x86)\Adobe\Reader 9.0\Reader\plug_ins " directory, so if it is copied such copying error appeared, if not copied it does not appear. Baylon dictionary addin is installed when you install babylon dictionary software, and it is here " C:\Program Files (x86)\Babylon\Babylon-Pro\Utils ", its name is " BabylonRPI.api "
Edit3:06-April-2013
My experience is that Babylon Dictionary was causing this error. With babylon version 10 acrobat does not give that kind of error anymore, on windows 7 x64, but previous version leftover files may cause this error again even if you remove previous versions and install version 10. With a clean install of windows 7 x64 with babylon dictionary version 10 there is no error anymore.Uninstalling previous versions of Babylon using third party uninstalling software like Revo or Uninstall Tool may help without reinstalling Windows.

Copying positions in PPOME gives an error (5A293)

Similar Messages

Maybe you are looking for