Copying queries

Hey Guys
Is it possible to copy a query from one inforprovider to another and also the calculated and restricted key figures along with it as longs as those objects are present in the other infoprovider as well. ANd the key figures i have are all local. Can i make them local to global (but they have all been saved as default technical names)
thanks

Use transaction RSZC for copying query elements.
Search the forum - you will get lots of threads on this topic if you have any doubts.

Similar Messages

Errors while copying queries from Infoset to DSO in BI 7.0. Why

Hi All,
I am trying to copy queries from Infoset to DSO in BI 7.0.
Message displayed after entering the data target names in Source Infocube (Infoset) & Target Infocube (DSO).
: Errors when reading InfoObjects for InfoCube (Infoset).
My Infoset has 2 queries.
I need to copy only one query to the DSO which is part of the infoset. How can we achieve this.
Please explain.
Thanks

Hi Murali,
who said the target is different.
The target is different in the sense, source is an Infoset & Target is an DSO.
This DSO is a part of the above Infoset.
RSZC works here but its giving errors as mentioned above.
Regenerate in the sense, u mean i need to create the same again on DSO.
Is there any other way.
If providing some solution, let it be clear.
Thanks.

Error while copying queries

Hi Community,
                      I am trying to copy queries from Info Cube to Multiprovider using RSZC, I got error called
"InfoObject 0MATERIAL__0DIVISION missing from target InfoCube ZSCMIM_M1"
"InfoObject 0MATERIAL__MATL_CAT missing from target InfoCube ZSCMIM_M1"
"InfoObject 0MATERIAL__MATL_GROUP missing from target InfoCube ZSCMIM_M1"
"InfoObject 0MATERIAL__MATL_TYPE missing from target InfoCube ZSCMIM_M1"
"InfoObject 0PLANT_COUNTRY missing from target InfoCube ZSCMIM_M1"
            I created Multiprovider with one basic info cube in BI 7.0. by draging dimensions,keyfigure, Unit, time from left to right than I selected the "Select key figures Icon" --> Selected Create proposal for all Infoobjects" same as for Charecteristics.
             I checked the attributes and charecterisctics they are active. Please help me ....
Regds
Dave.

Hi sap Experts,
I have problem in the creation of Hierarchies.
I am working in BW 3.1 IDES
TO_MAT is a CHAR, I have to create Hierarchy for this. I have done the following,
1.Under the Hierarchy Tab I enable Time dependent Hierarchy structure and activated.
2.On Rt.click -->Create Hierarchy- Given Name and description
Now I am in Hierarchy material Change: Modified version window
3.clicked Create Charactaristic Node button
When I selelct the Info Object CHAR - [ " Info Object TO_MAT is not entered for TO_MAT as a foreign Hierarchy Characteristic"] this error is coming. I tried with other CHAR also. advice me to correct this .
Help will be Highly appreciated.
Thanks.
Hema

Problem in copying Queries

Friends
When copying queries i am getting the following error.
An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause
The system tried to insert a data record, even though a data record with the same primary key already exists
Regards
Sundaresan

i have been just checking ST22, i don't see any log over there,but i do searched in SM21 there i see that i am missing some insufficent privileges..
to be precise ..
>ORA-01031 - Insufficient Privileges
Data base error at 1031 at EXE
thank you for your reply..

Copying Queries from client to client

Hi all,
I have built a query within the QEA (test) client using SQ01/SQ02 and now the same query has been requested in the PEA (production) client. My question is can i copy queries across clients or does it have to be re-built?
Cheers
Jim

Yes .You can move from One client to another client by copying the query program which generates once you built query in the background and that can captured in TR .
however , you can also have option download and upload the same in PRD.
for downloading and uploading abap query follow steps given below
DOWNLOAD ABAP QUERY
1. Go to SQ02 .
Select Environment -> Query Areas..
Select Standard Area (Client specific)
(If Query does not exist in Standard Area then You will have to copy that Query From Global Area to Standard Area.)
For Coping Query From Global To standard first select that query from list.
2)Now select Environment-> Transports
3)In next screen select Copy Global to standard radio button.
Check Overwriting allowed (only with import/upload/copy)
Remove Check for Test Run
Select Transport InfoSets and queries radio button
Fill Infoset and Query with corresponding names.
4)Now Press Execute button.Copy Log will be displayed.
Now Query exist in Global & Standard Area.
5) Go to SQ02 .
Select Environment -> Query Areas..
Select Standard Area (Client specific)
Select Infoset from list.
6) Select Environment -> Transports
7)Select Download radio button
Check Overwriting allowed (only with import/upload/copy)
Remove Check for Test Run
Select Transport InfoSets and queries radio button
Fill Infoset and Query with corresponding names.
8) Click on Execute button
Now It will ask you to save file.save it.
Now Open another system where you want to make copy of that infoset.
In the same way transport the User Groups using the Transport User GRoups radio button.
UPLOAD ABAP QUERY
1. Go to SQ02 .
Select Environment -> Query Areas
Select Standard Area (Client specific)
2. Select Environment -> Transports
3)Select Upload radio button
Check Overwriting allowed (only with import/upload/copy)
Remove Check for Test Run
Select Transport Info Sets and queries radio button
Fill Infoset and Query with corresponding names.
4) Click on Execute button.
It will ask you for the place for uploading file.
Select that place (from where you downloaded file).
Now infoset & query is uploaded.Log will be displayed.
in the same way download the user group also.
5)Go to SQ02
Select Environment -> Query Areas
Select Standard Area (Client specific)
SQ02 -> Infoset -> Generate.
Enter Yes.
6)Go to SQ01
Select Environment -> Query Areas
Select Standard Area (Client specific)
Enter your Query Name.
7)Click on Execute button
Regards
JH

Copy/Create local copy queries in Production

We´ve closed our Production environment for changes.
The problem is that some users must have access to copy queries/workbooks (that were transported from DEV) to a local copy ($TMP), in order to make changes to the structure of these copied queries. It seems that when we click on "Save query as", BW tries to save it into a Request, but it should save it as Local.....
How could it be achieved?
Thank you in advance,
Cris

Use Tcode SU53 & then try creating/changing a query...The Authorization Object required for creating/changing a query is captured in SU53 screen.
Authorizations are based on the values set for an Authorization Object.
For Eg : If a value '01' is set against an Authorization Object it means that a Create Authorization is available.Like value '02' for change etc..,
Get this authorization object with the necessary authorizations assigned to a role & have it assigned to the Users.

Restricted key fields & copying queries.

We created a multiprovider and wanted to copy some queries from an existing infocube. We are using RSZC to do this. The queries that we are coping use restricted key figures (RKF). If the multiprovider does not have the RKF it copies it as well. But it creates it with the extension _x.
So I copy two queries that both use a RKF named ZRKF, I end up with ZRKF_1 & ZRKF_2 defined in the multiprovider. Is there any way I can copy queries over and get the needed RKF without having duplicates of the RKF? (i.e. copy over ZRFK and not end up with ZRFK_1 & ZRFK_2)
Thanks,
Chris Robertson

Hi Chris,
If you copy all queries that you want from Cube A to Cube B in one shot, then you will be left with just RKF(s)_1.
You can then attempt to remove this _1 off the RKF by modifying the record in SE16 > RSZCOMPDIR.
Hope this helps...

Copy queries + variants + workbooks -- RSZC ?

BW Experts,
Using RSZC can we copy queries, variants and workbooks?
I have to make a copy of queries from the cube to the multicube.
Thanks,
BWer

Hi BWer.
You can copy your query like this:
1 Go to SE37
2 Type in RSZ_I_COPY_QRY_TO_CUBE
3 Press Display
4 Scroll down and look for this line in the code:
IF l_subrc <> 0 OR l_is_compliant = rs_c_false.
5 Position the cursor on the line and set a breakpoint by clicking the "stop" sign
6 Go back
7 Run the module by pressing F8
8 Type in your source + target cubes and press F8
9 You get to the debugger at the line where you set the breakpoint. Double click on l_is_compliant to make it show in "field names" (to the left) below the code.
10 Type in x in the "field contents" (to the right), press the pen symbol to the right of the line and press F8
11 Chose the query you want from the list and press "transfer selections"
12 Check the log: after all the error messages about the cubes not being identical, there should be one line with the green light of hope - this is your query that was copied
13 Check if all the objects in the query are available in the cube you copied to by opening the query from the query designer.
14 If some objects are missing in the cube you copied to, you'll have to fix this - If they are there, you can look busy for a couple of hours just doing your own thing and having everybody else think you are copying the query manually :-D
(you might want to change the query tech name by using "save as" from the query designer)
Enjoy,
Jacob
Message was edited by: Jacob Jansen
...and of course: If your system crashes or something like that when you try this, or as a consequence of trying this, I accept no responsibility :-D
I did this on BW 3.0B ... dunno how it will work on other versions...

Copying queries between cubes

Hi,
I would like to copy queries from a cube to a MultiProvider. Both have the same structure.
I found the help at http://help.sap.com/saphelp_nw04/helpdata/en/9f/f57539d6d1c93be10000000a114084/content.htm . There it says:
Result
The copied queries and the copied sub-objects have their own names. The new names are derived from the name of the original object and the added elements _<number>.
So the original query remains connected to my cube and a copy of this query will be created pointing to my MultiProvider. The technical name will change from e.g. "zmy_query" to "zmy_query_1". The same then applies to sub-objects (structures, calculated key figures and restricted key figures).
Did I understand this correct?
Thanks!

Hi Steve,
Structure can be re-usable where it holds multple number of CKFs/RKFs/KFs/Chars.... By using RSZC you can copy reports and its adjacent componets to other cube.
We do this activity during enhancement activity, not to stop users from viewing reports.
Regards,
rvc

Have anybody copied Queries from "Test" database to "Production database?

I am looking for the best method to copy queries from one database to another. From TEST to PRODUCTION. Other than Copy Express or Copy/Past, is there another recommended approach? Such as within SQL?

Hi Alain,
Copying anything from database A to database B using SQL, means somehow using SQL command "Insert". Please note that commands like Insert, Update, Delete are NOT SUPPORTED as it might cause data corruption.
Kind regards
Mario

Run-time Error '429' when copying queries from one userid to a new userid

Hello,
One of the users is having an issue when copying queries from an old user id to a new user id.
She is getting the visual basic run-time error '429' - active x component can't create object while copying.
This is not consistent. From what I can tell, this does not appear to be a bex query designer issue but something in microsoft.
Please let me know either way. I have found minimal posts on this issue. Most that I have found are outside the sdn forum and talk about registry issues?
Thank you,
Lynda

According to your error message, your onClick function declaration line closes the parenthesis twice... you may have a typo in what you actually put in the file versus what you think you put...
function onClick()event:MouseEvent):void{

Help needed to Copy Queries from one User Favorites to other

Hi Experts,
We have one requirement to copy Queries from favorites of one user to other,But issue that while i am trying this in sandbox for any new user it is working with SE 37 Function module -FAVOS_EVENT_ADD_TO_USER_SHELF Approach then Queries are visble on Favorites on USER MENU.
And for any other existing user if we use this Function Module ,Queries saved to fav are not visible in USER MENU screen although it is visible in TABLE SMEN_BUFFC.
Please advice on this.
Thanks
Nilesh

Hi,
Use FNDLOAD.
Note: 364558.1 - How To Use FNDLOAD To Download Responsibilities With All Security Groups, Not Just STANDARD
Note: 735338.1 - Tips About FNDLOAD
FNDLOAD responsibility
FNDLOAD responsibility
use FNDLOAD to download the profile setup for a responsibility
use FNDLOAD to download the profile setup for a responsibility
Thanks,
Hussein

Copy Queries where there is no transportation path

Hi,
My requirement is to copy a query from one server to another(for eg:Quality to development) in situations where the transportation path is not there(i.e we cannot transport the queries)and in each server the same modifications needs to be done.
Your suggestions in this regard will be really helpful.
Regards,
G.Monica Roja Flora.

Hi Monica,
In your case you can use XML import/export functionality, Check RSA1 transport connection. It works well for copying queries.
Jaya

Copy queries

When copying query in BW 7.0 using RSZC, there is an error "General Control error".
How could this be fixed?
Is there another way to copy queries?

Hi,
If you want to copy a query,then you can Perform Save As in Query Designer applicaiton itself.It will just create a copy of a query and you can save it in a different name.
Rgds,
Murali

How to copy queries from 1 Query folder to another query folder in TFS 2013 using C # programmatically ?

Hi ,
         I'm trying to copy a bunch of queries from 1 folder in "Shared queries" to another folder within "Shared Queries" using C#.
         I'm looking to do something like this
         foreach(query q in folderx )
                        foldery.query = folderx.query;
          I have been trying to use the queryfolder and its properties but not able to find the correct class/property/function to use. I have seen this link http://bzbetty.blogspot.in/2012/12/tfs-automation-automatically-creating.html
but here they are creating new queries in the new folder rather than copying it .

Hi Arun,
I am trying to involve someone to further look at this issue. There might be some time delay. Appreciate your patience and thanks for your understanding.
And you can check if the tool that made by Dan helps, check the link:
http://dhvik.blogspot.in/2009/06/handling-work-item-queries.html
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Copying Queries from one infoset to the other with variants

Hello Gurus,
I have two infosets (A & B) based on logical database PNPCE. Infoset A & B are exactly the same. Now, I want to copy the queries of infoset A to infoset B.
I am unable to copy the queries with variants. And I am getting following message:
Error when copying query report XXXXXXX= with variants. Error when importing query
FYI, I am able to copy the queries without variants successfully, using 'Sap Query: Special Copy Functions'.
Any help on this would be much appreciated.
Thanks,
Ikram

I think you are right. I see now that I am overcomplicating things.
To answer your question, no I do not add any color adjustments to the individual compound clips. I double click into the compound clips and make color adjustments to each of the angles from the multicam clip. When copying a clip made from the same multi cam clip from one project to another, any color adjustments made to the angles of that multicam clip that was copied over from the other project, does not carry over to the same multicam clips to the new project it was copied to - even if you break the compound clip apart to just the multicam clip, at least that's what I've noticed.
But as you said, the easier thing to do, and this makes total sense now, would be create your multicam clip, and use keywords to label the parts in the browser, then drag the clips to the timeline as you need them. I'm assuming that the color corrections you apply to the angles on the timeline will be automatically applied to new keyword clips you drag to the timeline? Also, to name those multicam clips on the timelines, would you use markers? Is this correct?
I really need to watch a few online tutorials on compound clips, but what Luis said has really cleared things up for me.
Thanks so much for your help and patience guys!

Copying queries

Similar Messages

Maybe you are looking for