Copying recorded shows from one dvd to another new one

can recorded shows on a dvd be transferred to a new dvd, the x1 dvd?

rwlangdon3231 wrote:
Can the recorded shows on a comcast VCR to transferred to another, newer comcast VCR which is taking the old VCR's place?
No, they can't be transfered from one Comcast DVR to another.  You will have to watch them, or play them back in real time to another recording device like a computer captuer card or a DVD recorder that you would purchase.

Similar Messages

  • How To Copy Selected Music From One Library to Another?

    What is the best way to copy selected music from one library to another?
    I have a big and growing iTunes library -- 33,000 songs.
    A year ago I copied my library to my daughter's new iMac.  Now, a year later, I'm off to visit her and wonder how best to update her library.  In the past year I have added a number of items to my library and I'm sure she has done the same -- some might be the same but many will be different.
    How do I update her library with the new things I've added in the past year but not wipe out things she had added or duplicate when we each have a song?
    I can load any / all of my stuff on an external HD and take that to plug in to her computer.  Then what?  I want to avoid duplicates and make sure I get stuff like album artwork.
    I'm running iTune 10.4 on an iMac with OS X 10.6.8 -- my daughter will have the same iTunes and OS X once we update her software.
    Any advice would be great.
    Thanks

    If you're sharing the same Apple ID and all your songs are from the iTunes Store, it's easy:
    In iTunes on your computer, go to File->Preferences->Store and check the box next to MUSIC under AUTOMATIC DOWNLOADS.
    You should also read this article, the section titled TO DOWNLOAD PREVIOUSLY PURCHASED APPS, BOOKS, MUSIC, OR TV SHOWS TO YOUR COMPUTER:
    http://support.apple.com/kb/ht2519
    You could also use an rsync utility such as backuplist+ to perform a 2-way sync of the files in your two libraries while your computers are connected via FireWire with one of them in FireWire Target Disk Mode, or from your external hard drive with your daughter's computer and then to yours again. After that, you'll need to use iTunes on each computer to update its library with the new files:
    http://rdutoit.home.comcast.net/~rdutoit/pub/robsoft/pages/backup.html
    This last would also be the preferred method if you have authorized each other's computers for media purchased with each other's Apple IDs (i.e. you are not sharing the same Apple ID), or if you have music from sources other than the iTunes Store. Most likely, though, music from sources other than the iTunes Store would not be legal to copy in this way for this purpose, although there is probably no technical impediment.

  • Cs sdk: copying an item from one document to another

    is there a way to copy any item from one ai document to the other ?

    I'm not one for bumping old threads, but this problem is really giving me a headache...
    I'm having the same exact problem with copying groups from one document to another.  It doesn't seem to matter if it's a top-level group or not; any group that gets copied over results in the copied art not showing up in the layer list and gives errors when trying to click on it.
    If my source document looks like this:
    Layer 1
      <path 1_1>
      <path 1_2>
      Layer 2
        <path 2_1>
    If I DuplicateArt on the GetFirstArtOfLayer(Layer 1), Layer 1 gets copied into the new document, but it doesn't show up in the layer list and I get errors trying to click on any of the art.
    If I iterate over the children/siblings of Layer 1 and duplicate them all separately, <path 1_1> and <path 1_2> will show up correctly in the new layer list and are clickable, but Layer 2 will not, and clicking on <path 2_1> results in the error.
    At this point, the only solution I can think of is to recursively iterate over the source tree, manually creating the destination groups, and then copying the art work into them.
    Very frustrating!

  • Concerning midi data in GarageBand for iOS: can we copy midi data from one virtual instrument to another?

    Concerning midi data in GarageBand for iOS: can we copy midi data from one virtual instrument to another?
    For instance: I play my "lucky take" on the virtual piano, and now I am curious how it would sound on let's say a organ. Normally I would select the midi content out of the piano track and copy it into the organ track. I cannot figure out how to do this in GarageBand for iOS. Is there anyone out there with a solution?
    Thanks!

    It is limited, how you can move regions between tracks. Basically, you can move between tracks with the same touch instrument.  See the help: http://help.apple.com/garageband/ipad/2.0/index.html#chsec12c15d
    Move a region
    Drag the region left or right to move it forward or back in time. Align the left edge of the region with the bar or beat on the ruler where you want it to start playing.
    Drag the region up or down to move it to another track with the same Touch Instrument. You can also drag regions between Keyboard and Sampler tracks, and between Audio Recorder and Guitar Amp tracks. Smart Drums regions cannot be dragged to another Smart Drums track.
    If you move a region so that it overlaps another region, the overlapped part of the “covered” region is deleted.
    Paste a region
    You can paste a region you have copied, or paste an audio file from an app that supports copying audio to the clipboard. GarageBand supports 44.1 kHz sample rate, 16-bit depth uncompressed audio files.
    You can paste copied regions to another track with the same Touch Instrument. You can also paste regions between Keyboard and Sampler tracks, and between Audio Recorder and Guitar Amp tracks. Smart Drums regions cannot be pasted to another Smart Drums track. Audio files copied from another app can be pasted to Audio Recorder or Guitar Amp tracks.
    Move the playhead to the point where you want the region to start.
    Tap the header of the track where you want to paste the region to select the track.
    Tap the track where you want to paste the region, then tap Paste.You can also tap an empty area of Tracks view, then tap Paste. In this case the region is pasted into the currently selected track.

  • How can I copy GPS information from one image to another?

    I bought a Canon S100 specifically for its GPs and movie capability.  On a recent vacation, I used the S100 and a Nikon D300.  In cases where images were taken with both cameras in approximately the same place, I would like to copy the GPS information from the S100 CR2 files to the D300 NEF files.  Does anyone know how to do this or if there is any plugins that will do it?

    The added benefit of using GeoSetter to copy the information from one photo to another, is that you can see where every already-tagged photo is on a Google map to make sure the location is actually correct.  Sometimes the camera clock is off a few seconds or minutes and you can easily figure how what offset to use by watching where the existing photos show on the map.
    Using the MS Pro Photo Tools to generate a track from the existing S100 photos and then using that track in GeoSetter to assign the rest, with interpolation enabled, seems like the best course of action if the S100 track information is no longer available.
    When using an external program to Geotag images that are already in LR, to be safe you should first save all the metadata to XMP files in the folder you’re going to tag, then exit LR, then geotag the photos, then restart LR and read information from all the XMP files.
    Another benefit of GeoSetter is that you can assign the locality information to the photos that already have just coordinates in them.

  • How do I move or copy a page from one pages doc to another?

    I used to frequently move or copy a page from one multiple-page Pages document to another just but dragging and dropping the thumbnail.  Since I upgraded I can't do this anymore.  How can I do it now?

    Rhosh18 wrote:
    I used to frequently move or copy a page from one multiple-page Pages document to another just but dragging and dropping the thumbnail.  Since I upgraded I can't do this anymore.  How can I do it now?
    It never worked that way in Pages '09. You have to copy and paste the Thumbnails.
    That no longer works in Pages 5. Sounds like you are not copying and pasting content because that certainly works. Read what VikingOS wrote and do precisely what he said.
    Peter

  • Error while copying a page from one application to another application

    Hi All
    I am using Oracle Apex 4.0
    I getting the error ORA-06502 Pl/Sql Numeric error character string buffer too small when i copying a page from one application to another application.
    Thanks & Regards
    Srikkanth.M

    I'm having the same issue. How did you solve this?

  • How do I copy and paste from one page or file to another page or file - on the same screen?

    How do I copy and paste from one page or file to another - on the same screen?

      Open both of your images in the Editor. Click on the image you want to copy and press Ctrtl+A (select all) followed by Ctrl+C (copy) then click the tab for your other image and press Ctrl+V (paste)
    Alternatively click on your background image then simply drag the second image from the photo/project bin and drop it into the main editor workspace on top of the background image. Use the move tool to position and the corner handles of the bounding box to scale.

  • Can I copy my iTunes from one Mac to another to a distant location?

    I have 2 homes one in NYC and the other in upstate NY. I have multiple Macs at both locations all using Snow Leopard and the latest version of iTunes(9). I only have 1 iTunes library I maintain at the upstate location and have to bring my iPod to the NYC location to play my music. Can I not copy my iTunes library to the NYC location using Home Sharing or using some other method? I often forget to bring my iPod and am left without my music.

    Prince Moe wrote:
    Hi
    Since I had a problem with my Mac's drive that suddenly failed (I am able to read ONLY), I replaced the internal HD with my emergency HD that I had backedup a few months before. I would like to know if there's a way to copy my settings from one mac to another? Is there a specific folder for all apps or do I have to find out each and every single file for each app?
    I need the settings for
    System (view, font, color,)
    Finder (view, etc)
    iTunes (that include all library, playlists, etc),
    Firefox (Bookmarks, settings & plug-ins),
    Safari (Bookmarks, settings & plug-ins),
    Address Book (contacts)
    Thuderbird (emails accounts, contacts, passwords, etc)
    Stickies (stickies on the dock - i have info on there unsaved)
    Filezilla (FTP infos)
    Would appreciate.
    Thnx.
    All that info is found in your user/library folder, I just did a 60 machine rollout and copied all those settings from user/library, just be forewarned that if you upgrade software those setting will not take on the machine, for example Adobe CS 3,4 will not usable by CS5.  let us know if you need more help.  Also make sure you copy most of your preferences in the user/library/prefences folder.
    Note: If you are using an identical backup with all apps and user settings, you can just copy all folders from user to your new home folder.  Remember that only if the image or backup is identical to your production OS.

  • Can i copy my settings from one mac to another?

    Hi
    Since I had a problem with my Mac's drive that suddenly failed (I am able to read ONLY), I replaced the internal HD with my emergency HD that I had backedup a few months before. I would like to know if there's a way to copy my settings from one mac to another? Is there a specific folder for all apps or do I have to find out each and every single file for each app?
    I need the settings for
    System (view, font, color,)
    Finder (view, etc)
    iTunes (that include all library, playlists, etc),
    Firefox (Bookmarks, settings & plug-ins),
    Safari (Bookmarks, settings & plug-ins),
    Address Book (contacts)
    Thuderbird (emails accounts, contacts, passwords, etc)
    Stickies (stickies on the dock - i have info on there unsaved)
    Filezilla (FTP infos)
    Would appreciate.
    Thnx.

    Prince Moe wrote:
    Hi
    Since I had a problem with my Mac's drive that suddenly failed (I am able to read ONLY), I replaced the internal HD with my emergency HD that I had backedup a few months before. I would like to know if there's a way to copy my settings from one mac to another? Is there a specific folder for all apps or do I have to find out each and every single file for each app?
    I need the settings for
    System (view, font, color,)
    Finder (view, etc)
    iTunes (that include all library, playlists, etc),
    Firefox (Bookmarks, settings & plug-ins),
    Safari (Bookmarks, settings & plug-ins),
    Address Book (contacts)
    Thuderbird (emails accounts, contacts, passwords, etc)
    Stickies (stickies on the dock - i have info on there unsaved)
    Filezilla (FTP infos)
    Would appreciate.
    Thnx.
    All that info is found in your user/library folder, I just did a 60 machine rollout and copied all those settings from user/library, just be forewarned that if you upgrade software those setting will not take on the machine, for example Adobe CS 3,4 will not usable by CS5.  let us know if you need more help.  Also make sure you copy most of your preferences in the user/library/prefences folder.
    Note: If you are using an identical backup with all apps and user settings, you can just copy all folders from user to your new home folder.  Remember that only if the image or backup is identical to your production OS.

  • I have no problems copying iMovie Events from one Mac to another, however, how can I copy iMovie Projects from one Mac to another?

    I have no problems copying iMovie Events from one Mac to another, however, how can I copy iMovie Projects from one Mac to another?  Any help will be appreciated.  Thank you.

    This should give you some good insight, I'd probably store them on an External HD on the old machine and then just drag and drop to the new machine.
    https://discussions.apple.com/docs/DOC-4141

  • How do I copy an image from one Keynote presentation to another one?

    I have a previously saved presentation on Keynote in iCloud. I created it from my desktop at work. Some of the images I used for the presentation I want to use again in another presentation, onlh this time I am working off my laptop and don't have the same access to those images. Is it possible to copy/paste images from one Keynote presentation into another? I can't even seem to click on the image and save it.
    Any suggestions?

    Clicking and dragging does not work.
    Click on the image and Copy and Paste
    or
    Inspector > Metrics > File Info > click on the icon of the file and drag it to your desktop
    You can then drag that file back in wherever you want.
    Peter

  • How can I copy cell formatting from one range to another?

    How can I copy cell formatting from one range to another, including text fonts, colours, borders, etc., so that, for example, I can reuse a formatted reconciliation table again in different parts of a sheet?

    Hi George,
    Wayne found the Spinning Beachball of Death, and you will find it too.
    Numbers is not good at handling large datasets. Might I suggest that you group your data into smaller sets (each month, perhaps?) and save each group in a separate Numbers document. Numbers will not link between documents, but you could have a summary Table within each document. Then comes the "clunky" bit of copying all those summary tables into a master document where you do the final processing of the data.
    Regards,
    Ian.

  • How do I copy the style from one control to another?

    I need to programmatically copy the style from one graph to another. I'm currently using the importstyle and export style functions but I'd like to avoid that since: 1) I'm creating >100 of the same graphs in a scrolling window and execution time is a concern, and 2) it makes it harder to redistribute the application, and 3) you shouldn't have to import/export from disk just to copy a graph style.
    I noticed the copy constructor was disabled so you can't just create a new one from the original. I suppose I could iterate through all the styles and transfer them from the master graph to all the copies but is there an easier way to do that? If not, is there some sample code for that?
    I'm using MStudio 7.0 for C
    ++.
    Thanks,
    -Bob

    One way that you could do this would be to create a helper method that configures your graph rather than configuring it at design-time, then use that helper method to apply the settings to the new graphs that you create. However, this would only work if you wanted all graphs to be configured exactly the same way - this would not work if the settings of your master graph are changing at run-time and you want the new graphs to be configured with the current settings of the master graph.
    Another approach is to query each control for IPersistPropertyBag, create an IPropertyBag, pass the IPropertyBag to the master graph's IPersistPropertyBag:ave, then pass the IPropertyBag to the new graph's IPersistPropertyBag::Load implementation. I'm not aware of any implementations of IPropertyBag that are readily available for use in applications, so the tricky part is creating the IPropertyBag. Below is a very simple implementation of IPropertyBag that should be enough to get the job done for this example. First, add this to your stdafx.h:
    #include <atlbase.h>
    CComModule _Module;
    #include <atlcom.h>
    #include <atlcoll.h>
    Here's the simple IPropertyBag implementation:
    class ATL_NO_VTABLE CSimplePropertyBag :
    public CComObjectRootEx<CComSingleThreadModel>,
    public IPropertyBag
    private:
    CAtlMap<CComBSTR, CComVariant> m_propertyMap;
    public:
    BEGIN_COM_MAP(CSimplePropertyBag)
    COM_INTERFACE_ENTRY(IPropertyBag)
    END_COM_MAP()
    STDMETHODIMP Read(LPCOLESTR pszPropName, VARIANT* pVar, IErrorLog* pErrorLog)
    HRESULT hr = E_FAIL;
    if ((pszPropName == NULL) || (pVar == NULL))
    hr = E_POINTER;
    else
    if (SUCCEEDED(::VariantClear(pVar)))
    CComBSTR key = pszPropName;
    CComVariant value;
    if (!m_propertyMap.Lookup(key, value))
    hr = E_INVALIDARG;
    else
    if (SUCCEEDED(::VariantCopy(pVar, &value)))
    hr = S_OK;
    return hr;
    STDMETHODIMP Write(LPCOLESTR pszPropName, VARIANT* pVar)
    HRESULT hr = E_FAIL;
    if ((pszPropName == NULL) || (pVar == NULL))
    hr = E_POINTER;
    else
    m_propertyMap.SetAt(pszPropName, *pVar);
    hr = S_OK;
    return hr;
    Once you have a way to create an implementation of IPropertyBag, you can use IPropertyBag and IPersistPropertyBag to copy the settings from one control to another like this:
    void CopyGraphStyle(CNiGraph& source, CNiGraph& target)
    LPUNKNOWN pSourceUnknown = source.GetControlUnknown();
    LPUNKNOWN pTargetUnknown = target.GetControlUnknown();
    if ((pSourceUnknown != NULL) && (pTargetUnknown != NULL))
    CComQIPtr<IPersistPropertyBag> pSourcePersist(pSourceUnknown);
    CComQIPtr<IPersistPropertyBag> pTargetPersist(pTargetUnknown);
    if ((pSourcePersist != NULL) && (pTargetPersist != NULL))
    CComObject<CSimplePropertyBag>* pPropertyBag = 0;
    CComObject<CSimplePropertyBag>::CreateInstance(&pPropertyBag);
    if (pPropertyBag != NULL)
    CComQIPtr<IPropertyBag> spPropertyBag(pPropertyBag);
    if (spPropertyBag != NULL)
    if (SUCCEEDED(pSourcePersist->Save(spPropertyBag, FALSE, TRUE)))
    pTargetPersist->Load(spPropertyBag, NULL);
    (Note that "CreateInstan ce" above should be CreateInstance - a space gets added for some unknown reason after I click Submit.)
    Then you can use this CopyGraphStyle method to copy the settings of the master graph to the new graph. Hope this helps.
    - Elton

  • How do I copy a page from one Pages document to another using Pages 5.0?

    I posted this question on another page, and haven't recieved an answer to it yet. However I have found a temporary solution, so I am posting this here in case anyone else has a similar problem.
    The issue here is that I have just upgraded from Snow Leopard to Maverick (10.9.1), and my Pages also upgraded (to 5.0.1), altering my Pages documents. This is the issue, as as far as I can see the new Pages does not offer some of the basic needs that the old Pages did! In other words it is worse than the previous version.
    Using the upgraded new Pages 5.0.1 seems to result in some major editing problems for me. If you upgrade, make sure you KEEP the old version of Pages 09 (v 4.3). That is what has saved me!  If you have the same problems I have had - explained below, you will still be able to close the new version and open your Pages document in the old version, provided it is not a new Pages document. If it is, it will be possible to export it as a Pages 09 document and edit properly.
    After upgrading to the new Pages 5.0.1, when I open documents in Pages and try and copy a section from one document to another (easy before using the thumbnails) many of the Menu items previously available are visible but appear faded and are not possible, including Insert>Section Break/Page Break/Page Number and Edit>Cut/Copy/Delete/Undo/Redo
    This even happens if I duplicate the Pages document and try and do any of these from the Duplicate (which should be an easily editable copy).
    My solution has been to simply open all Pages documents that Iwant to edit (or may want to edit in future) in the old Pages app (v 4.3), which I never got rid of. That has meant I can continue editing and copying a section (of 1 or more pages) from one Pages document to another.
    If anyone reading this has figured out a way to edit Pages documents using the new version 5.0.1 please post an explanation, and I will try it!

    And there are those who don't like me repeating the same message over and over again in this forum!
    Apple has removed over 90 features from Pages 5.
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Pages '09 should still be in your Applications/iWork folder.
    Archive/trash Pages 5, after Exporting your files to Pages '09, and rate/review it in the App Store, then get back to work.
    Peter

Maybe you are looking for