Copying rules for conditions do not contain V 1 090 2 entry

I am getting the above error while i copy price from pricing agreement in to service contract line item..
Am i doing something wrong?There are two pricing procedures mentioned in VOV8 in the contracts section for Service contracts PABR01 & PABR02. What is the actual purpose of the condition types underlying these procedures.How can we effectively using these procedures and what role do they play when i copy pricing to the release orders ?

Can you indicate the error message number ??
thanks
G. Lakshmipathi

Similar Messages

Copy control for conditions

Hi Guys,
i am having one requirement.
My client is using one condition from so long time, they defined so many condition records for that condition type.
Now the case is, if i am using the other condition type with the resemblence of that condition type(exactly same with key combination) in another pricing procedure(because of some constraints we are not using same condition type). I want all condition records to be copied of that old condition type to this new condition type.
So, in this process i came to know, there is a configuration for copy control of condition. Plz share some config points in this regards.
Regards,
Rajesh.

Hi Raj In,
Jacqueline's solution is good for your requirement. The field RefConType is on Master data Box. Bear in mind, if you'll use this solution you should continue loading condition records for the old condition not by the new. If you don't want that, so you need to define condition copy rule for those condition in:
Sales and distribution --> Basic Functions --> Pricing --> Copy control for conditions
Then, to make the copy of the condition records use trx VK32.
Thanks in advance,
Mariano.

Imac-- Upgrading elements 10 to elements 12. Did successful backup of 10. When restore to 12 message said the disk in drive My Passport for Mac does not contain a valid backup

IIMac doing upgrade of Elements 10 to Elementys 12. Did full backup of 10 on my external hard drive "MY Passport". Rec'd message backup successful. Did restore on 12 and rec'd message "The disk in drive My Passport for Mac does not contain a valid backup". Any help suggestions?

The funniest part of the whole situation, Apple Care explained it to me as some kind of feature. The told me how to adjust the time when my computer sleeps and recommend I don't shut it down, let it sleep and "instant wake". I would bet if you called them about your Macbook, they would suggest you just close the lid and let it sleep rather than shutting it down.
Basically shutdown and restart have a problem and the solution is to not shutdown is how they explained it to me. They kept saying buzz words like "instant on" and "fast wakeup". My computer already could sleep and wakeup fast, but now shutdown and restart don't work right. I called them 3 times about it, but since they use these buzzwords, sounds like Lion is meant for a Macbook Air or a Mac with an SSD. If you have a normal hard disk, some of the saving/versions/resume features take too long to be written to the disk on shutdown. And when you start again, it takes a long time to reload the system to it's previous point.
Even if I uncheck the box to reopen windows on next start, it reopens them anyways.
If they can't give me a better explaination or some kind of fix, I will have to go back to Snow Leopard. I use my Mac in a production environment and depend on stability. They assured me before I upgraded that it would be stable and all the new saving and versions features could help my productivity. So far it's not helping me and downright annoying. You need to close all your windows before you close the program... if you have 5 windows open in terminal or textedit... every time you launch, they will launch all those windows. I just really want versions, not resume it seems.
But I can deal with it opening a million windows, just can't take it getting stuck on booting or not shutting down properly. This is a "feature" that should be fixed. LOL

Material Master: Copy rule for purchase variant prices

Hello together,
in the material master (transaction MM42) on variant level the purchase prices can by copied from the generic article to the variant; for this a copy rule can be applied; one of the copy rules can be selected an be used.
Now, the customer would like to copy additional conditions, such as freight, to the variants.
Is it possible to implement an own copy rule? Is there any Badi or user-exit?
Thank you for your information in advance.
Best regards,
Kurt.

Any answers ?

Reader &Acrobat CAB for SCUP does not contain update info

The Adobe Reader and Acrobat CAB files for use with SCUP, Patch Manager and WSUS does not contain any pre-requisite information. It also removes pre-requisite information from Adobe updates that have already been published to a WSUS server - thus halting all Adobe Reader and Acrobat updates. When is the CAB file going to be updated ?

The applicability rule is seen in the XML format as below,
<sdp:InstallableItem ID="de22ec71-8315-42b7-b4e5-f87270f80216">
- <sdp:ApplicabilityRules>
- <sdp:IsInstalled>
<msiar:MsiPatchInstalled />
</sdp:IsInstalled>
- <sdp:IsSuperseded>
<msiar:MsiPatchSuperseded />
</sdp:IsSuperseded>
- <sdp:IsInstallable>
<msiar:MsiPatchInstallable />
</sdp:IsInstallable>
- <sdp:Metadata>
- <msiar:MsiPatchMetadata>
- <MsiPatch xmlns="http://www.microsoft.com/msi/patch_applicability.xsd" SchemaVersion="1.0.0.0" PatchGUID="{AC76BA86-A440-FFFF-A440-7A8C40011003}" MinMsiVersion="4" TargetsRTM="true">
- <TargetProduct MinMsiVersion="300">
<TargetProductCode Validate="true">{AC76BA86-1033-FFFF-BA7E-000000000006}</TargetProductCode>
<TargetVersion Validate="true" ComparisonType="Equal" ComparisonFilter="MajorMinorUpdate">11.0.00</TargetVersion>
<UpdatedVersion>11.0.03</UpdatedVersion>
<TargetLanguage Validate="false">0</TargetLanguage>
<UpdatedLanguages>1058</UpdatedLanguages>
<UpgradeCode Validate="true">{AC76BA86-0000-0000-BA7E-7E8A45000000}</UpgradeCode>
</TargetProduct>
- <TargetProduct MinMsiVersion="300">
<TargetProductCode Validate="true">{AC76BA86-1033-FFFF-7760-000000000006}</TargetProductCode>
<TargetVersion Validate="true" ComparisonType="Equal" ComparisonFilter="MajorMinorUpdate">11.0.00</TargetVersion>
<UpdatedVersion>11.0.03</UpdatedVersion>
<TargetLanguage Validate="false">0</TargetLanguage>
<UpdatedLanguages>1058</UpdatedLanguages>
<UpgradeCode Validate="true">{AC76BA86-0000-0000-7760-7E8A45000000}</UpgradeCode>
</TargetProduct>
<TargetProductCode>{AC76BA86-1033-FFFF-BA7E-000000000006}</TargetProductCode>
<TargetProductCode>{AC76BA86-1033-FFFF-7760-000000000006}</TargetProductCode>
<ObsoletedPatch>{AC76BA86-A440-FFFF-A440-7A8C40011001}</ObsoletedPatch>
<ObsoletedPatch>{AC76BA86-A440-FFFF-A440-7A8C40011002}</ObsoletedPatch>
- <SequenceData>
<PatchFamily>AC76BA861033FFFFBA7E000000000006</PatchFamily>
<Sequence>11.00000.03000.10000</Sequence>
<Attributes>1</Attributes>
</SequenceData>
- <SequenceData>
<PatchFamily>AC76BA861033FFFF7760000000000006</PatchFamily>
<Sequence>11.00000.03000.10000</Sequence>
<Attributes>1</Attributes>
</SequenceData>
</MsiPatch>
</msiar:MsiPatchMetadata>
</sdp:Metadata>
</sdp:ApplicabilityRules>
<sdp:InstallProperties CanRequestUserInput="false" RequiresNetworkConnectivity="false" Impact="Normal" RebootBehavior="CanRequestReboot" />
- <msp:MspInstallerData FullFilePatchCode="{ac76ba86-a440-ffff-a440-7a8c40011003}">
<msp:MspFileName>AcrobatUpd11003.msp</msp:MspFileName>
</msp:MspInstallerData>
<sdp:OriginFile FileName="AcrobatUpd11003.msp" OriginUri="http://armdl.adobe.com/pub/adobe/acrobat/win/11.x/11.0.03/misc/AcrobatUpd11003.msp" Digest="NW3lgIGvJ90NX6tUWYP0em8G2wk=" Size="121290752" Modified="2013-05-11T12:23:59Z" />
</sdp:InstallableItem>

How do I disable copy/paste for most (but not all) of a .pdf?

Hello, I'm trying to create a .pdf document that is a "how-to" guide. I'd like to disable copy/pasting from 95% of this document, with the exception of a few sections that i'd like my users to be able to copy and paste and use as email templates. I've gone ahead and set pasword security settings and un-checked the box for "enable copying of text, images, and other content". Is there any way that I can enable copy/paste for just a few small sections of my document? or is it an "all or none" function?
Thanks in advance for your help. -Geoff

Graffiti, Can you please expand on that? I'm using Microsoft Word as my original document. I'll have mostly paragraphs of non-copyable text, with a few sections that contain sample email templates that will be copyable. Example below. Thanks, Geoff
Here is my description of an amazing new process written in Word. To use this process, copy the email template below and customize with your own name.
Email Template
Dear John,
Copy this email and send it with your own name.
Thanks,
Geoff
More non-copyable text.

Copy Control for EEWB fields not working

Hi Experts,
I have added one custom field to CRMD_ORDERAM_H using EEWB, now i want this field to be copied from Quotation to Sales order. I have tried with the following options:
1. Created new implementation Ztest for the Badi CRM_COPY_BADI with new filter value.
2. Assigned the implementataion in Copy control for transaction types.
3. Badi is getting triggered, but I am not able to copy the value to the sales order.
I have written the following code in ORDERADM_H method:
METHOD if_ex_crm_copy_badi~orderadm_h.
constants
INCLUDE crm_object_kinds_con.
INCLUDE crm_object_names_con.
INCLUDE crm_appointment_types_con.
local data
DATA:
    ls_orderadm_h_com    TYPE crmt_orderadm_h_com,
    lv_allowed           TYPE crmt_boolean,
    lv_ref_kind          TYPE crmt_object_kind,
    ls_input_field_names TYPE crmt_input_field_names,
    lt_input_field_names TYPE crmt_input_field_names_tab.
IF cs_orderadm_h is not INITIAL.
    lv_ref_kind = gc_object_ref_kind-orderadm_h.
    CALL FUNCTION 'CRM_ORDERADM_H_OBJ_ALLOWED_OW'
      EXPORTING
        iv_ref_guid            = cs_orderadm_h-guid
        iv_objectname          = gc_object_name-orderadm_h
      IMPORTING
        ev_allowed             = lv_allowed
      EXCEPTIONS
        admin_header_not_found = 1
        OTHERS                 = 2.
    IF sy-subrc <> 0 OR lv_allowed <> 'X'.
nothing to do
      RETURN.
    ENDIF.
    CLEAR ls_input_field_names.
    CLEAR lt_input_field_names[].
    ls_input_field_names-fieldname = 'ZZDEP2PVNDPGM'.
    INSERT ls_input_field_names INTO TABLE lt_input_field_names.
ls_orderadm_h_com-guid = cs_orderadm_h-guid.
ls_orderadm_h_com-ZZDEP2PVNDPGM = is_ref_orderadm_h-ZZDEP2PVNDPGM.
    CALL FUNCTION 'CRM_ORDERADM_H_MAINTAIN_OW'
      EXPORTING
        is_orderadm_h_com             = ls_orderadm_h_com
   IV_EXTERNAL_CALL              = FALSE
IMPORTING
   EV_GUID                       = cs_orderadm_h-guid
      CHANGING
        ct_input_field_names       = lt_input_field_names
   CT_DOC_LINKS                  =
   CT_DOC_FLOW_FIELD_NAMES       =
EXCEPTIONS
   HEADER_CREATE_ERROR           = 1
   HEADER_CHANGE_ERROR           = 2
   PARAMETER_ERROR               = 3
   PROCESS_TYPE_ERROR            = 4
   DELETION_NOT_ALLOWED          = 5
   NO_AUTHORITY                  = 6
   OTHERS                        = 7
    IF sy-subrc <> 0.
       MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDIF.
ENDMETHOD.
able to get the values to ls_orderadm_h_com and lt_input_field_names, but the value is not getting copied.
Any idea on this?
Thanks in advance.
Regards,
S Reddy

Hi Reddy,
You don't need to call functions like 'CRM_ORDERADM_H_MAINTAIN_OW' to update that attributes.
All you have to do is to fill changing structure CS_ORDERADM_H that belongs to your target document, with the values you desire (the value for ZZDEP2PVNDPGM field for example). Then fill changing structure CT_INPUT_FIELD_NAMES with the field names that you want to update ('ZZDEP2PVNDPGM' for example).
Kind regards,
Garcia

Complex expression rules for customizable groups not working

Hello Community,
we have recently installed Cisco Prime 4.1 (running on Windows server 2008 R2 Standard - 64bit Operating System).
Our main buildings are connected via Gigabit Interfaces, so I wanted to change the threshold in Fault Monitor only for those devices and those interfaces, to be something different than the default value (40%).
My regular expression is this:
(Interfaces.SystemName contains "Sw-AM-C6509" AND
Interfaces.Description contains "GigabitEthernet9/23") OR
(Interfaces.SystemName contains "Sw-KK-C6509" AND
Interfaces.Description contains "GigabitEthernet1/23") OR
(Interfaces.SystemName contains "Sw-MK-C6509" AND
Interfaces.Description contains "GigabitEthernet1/23")
When I try to "Check Syntax" I get an error message:
You have entered an invalid rule. Enter a valid rule. See the
Help
for examples of valid rules
I also found the following thread "https://supportforums.cisco.com/message/646043#646043" that provided an example, but I got the same error message, when I tried to run the example.
In my regular expression if I only type:
Interfaces.SystemName contains "Sw-AM-C6509" AND Interfaces.Description contains "GigabitEthernet9/23"
without any brackets and the like it seems to pass the syntax check.
Any help will be highly appreciated!
Thanks in advance,
Katerina

Hello Community,
https://supportforums.cisco.com/message/646043#646043 mentions a bug that should have been removed on LMS2.6 but was still persistent. It states that:
when defining complex rules you have to use the complete Object ID (this info is available in the User Guide but wasn't described in DFM On-line help), which is different for each application.
:Campus:OGS:Device
:DFM:VASA:DFMObject
:CMF:DCR:Device
:RME:INVENTORY:Device
I would have thought that if this was actually a bug it should have been removed in the newest version of LMS4.1, but from what I understand it must still be there. I couldn't find anything relevent in the Administration of Cisco Prime LMS 4.1 document.
In order to fix my problem I used the following syntax, which seems to pass the syntax check.
:DFM:VASA:DFMObject:Interfaces.SystemName contains "6509" AND
(:DFM:VASA:DFMObject:Interfaces.Description contains "1/23" OR
:DFM:VASA:DFMObject:Interfaces.Description contains "9/23")
It does get the job done, but this isn't exactly what I wanted.
I hope that someone can update this post and verify that this is the correct way to go.
Katerina

Copy rule for TExt from Inter company po to delivery

Hi All,
We are using inter company stock transfer. The flow as mentioned below.
Inter Company PO - All the text maintain in the PO - ME21N
Delivery / PGI - VL10B
Inter Company Invoice.
Now is it possible to text which entered in the PO should copy into to delivery?
Thanks,
SAmir Bhatt

Follow the instructions given in OSS note 751441
if you need to do more (e.g. adding own other text) than just adopting the text from PO, then follow instructions given in 53593.

Copy rules for NotifyUserOfChange

Hello,
I have an issue with an existing custom workflow NotifyUserOfChange.When I modify all needed parameters mentioned in Oracle training material (Practice 6 - BPEL, JDeveloper Setup) I am able to deploy, initiate that workflow.
However it gets me the following error:
[2006/11/08 14:56:24] Error in <assign> expression: <to> value is empty at line "149". The XPath expression : "/child::EmailPayload/child::ns4:FromAccountName" returns zero node, when applied to document shown below:
[2006/11/08 14:56:24] "{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure" has been thrown. less
<selectionFailure>
<part name="summary" >
<summary>XPath query string returns zero node. According to BPEL4WS spec 1.1 section 14.3, The assign activity <to> part query should not return zero node. Please check the BPEL source at line number "149" and verify the <to> part xpath query. </summary>
</part>
</selectionFailure>
I have used standard bpel.xml for that custom workflow.
If you have any ideas, how to fix this issue, your help would by really appreciated.
Dally

Found in log file for BPEL:
<2006-11-08 14:51:53,206> <ERROR> <default.collaxa.cube.services> <PCException::<init>> Exception not handled by the Collaxa Cube system.
<2006-11-08 14:51:53,206> <ERROR> <default.collaxa.cube.services> <PCException::<init>> An unhandled exception has been thrown in the Collaxa Cube system. The exception reported is: "oracle.ias.repository.schema.SchemaException: Unable to connect to Oracle Internet Directory Server. Please verify that the correct Oracle Internet Directory Server parameters are specified in /oracle/contentdb/config/ias.properties. Make sure that the Oracle Internet Directory Server specified in OIDhost, OIDsslport is up and running. Base Exception : javax.naming.NamingException: [LDAP: error code 1
- User does not exist in directory for Proxy Switch]
The user exists in OID, OID is up and running on both SSL, non SSL ports. ias.properties file has correct information.

Copying rules for PO

Dear All,
When Creating PO without Inforecord, the system creates Inforecord without that PO price ie. price is Zero. But it copies that prices from previous PO when I other PO for the same material & vendor.
please explain me the link & where it has been configured.
Thanks
Dhinakrar

Hi,
Please tick the indicator infoupdate at material data (item detail)tab of PO.
Reward if helpful.
Regards,
Chetan.
Edited by: Chetan on Jan 10, 2008 7:17 AM

OO3.3 SP1 Patch-ID 146564 for MacOSX does not contain dmg

Hello,
I've downloaded and extracted the Oracle Open Office 3.3 Service Pack 1 (MacOSX, Multilanguage), Patch-ID 146564-01, several times from different machines (Mac OSX and Win7), but I only get the readme files. It seems there is no dmg packaged. The .zip-file is 41k only, instead of 21MB.
Is there a issue with the package?
thanks
Christoph

Tuesday, March 29, 2011
The correct file is now online. I think they (whomever that may be) realized shortly after the initial release that they had forgotten the dmg and built the proper zip on May 14 but forgot to link it properly.
Phil

Cachestore for distributed scheme not getting invoked to "load" the entries

Hi,
We have a distributed scheme with CacheStore as below,
SERVER PART
<?xml version="1.0"?>
<!DOCTYPE cache-config SYSTEM "cache-config.dtd">
<cache-config>
<caching-scheme-mapping>
     <cache-mapping>
               <cache-name>ReferenceData-Cache</cache-name>
               <scheme-name>RefData_Distributed_Scheme</scheme-name>
     </cache-mapping>
     
<distributed-scheme>
     <scheme-name>RefData_Distributed_Scheme</scheme-name>
     <service-name>RefData_Distributed_Service</service-name>
     <serializer>
     <class-name>com.tangosol.io.pof.ConfigurablePofContext</class-name>
     <init-params>
          <init-param>
               <param-type>string</param-type>
               <param-value>TradeEngine-POF.xml</param-value>
          </init-param>
     </init-params>
     </serializer>
     <backing-map-scheme>
     <read-write-backing-map-scheme>
     <internal-cache-scheme>
     <local-scheme>
     <expiry-delay>1m</expiry-delay>
     </local-scheme>
     </internal-cache-scheme>
     <cachestore-scheme>
     <class-scheme>
     <class-name>com.csfb.fid.gtb.referencedatacache.cachestore.RefDataCacheStore</class-name>
     <init-params>
                    <init-param>
                         <param-type>string</param-type>
                         <param-value>{cache-name}</param-value>
                    </init-param>
                    </init-params>
     </class-scheme>
     </cachestore-scheme>
     <read-only>true</read-only>
     <refresh-ahead-factor>.5</refresh-ahead-factor>
     </read-write-backing-map-scheme>
     </backing-map-scheme>
     <backup-count>1</backup-count>
     <autostart system-property="tangosol.coherence.distributed-service.enabled">false</autostart>
</distributed-scheme>
</caching-schemes>
</cache-config>
The above configuration is used on tcp extend proxy node with localstorage=false
There is similar configuration on storage node,
- with no proxy,
- with same "ReferenceData-Cache" (autostart=true)
- and localstorage=true.
Following is my CacheStore implementation.
NOTE: This Cachestore is only for loading the cache entry from cache store.i.e. from some excel file in my case, i.e. only load() and loadAll() methods.
NO store() or storeAll().
package com.csfb.fid.gtb.referencedatacache.cachestore;
import java.util.Collection;
import java.util.HashMap;
import java.util.Iterator;
import java.util.List;
import java.util.Map;
import com.creditsuisse.fid.gtb.common.FileLogger;
import com.csfb.fid.gtb.referencedatacache.Currency;
import com.csfb.fid.gtb.utils.refdada.DBDetails;
import com.csfb.fid.gtb.utils.refdada.ReferenceDataReaderUtility;
import com.tangosol.net.NamedCache;
import com.tangosol.net.cache.CacheStore;
public class RefDataCacheStore implements CacheStore
     private DBDetails dbDetails = null;
     private ReferenceDataReaderUtility utils = null;
public RefDataCacheStore(String cacheName)
     System.out.println("RefDataCacheStore constructor..");
     //dbDetails = DBDetails.getInstance();
     utils = new ReferenceDataReaderUtility();
public Object load(Object key)
     return utils.readCurrency(key);
public void store(Object oKey, Object oValue)
public void erase(Object oKey)
     public void eraseAll(Collection colKeys)
     public Map loadAll(Collection colKeys)
          System.out.println("RefDataCacheStore loadAll..");
          Map<String, Object> obejctMap = new HashMap<String, Object>();
          List<Object> list = utils.readAllCurrencies();
          Iterator<Object> listItr = list.iterator(colKeys);
          while(listItr.hasNext()){
               Object obj = listItr.next();
               if(obj != null){
                    String key = "CU-"+((Currency)obj).getId();
                    obejctMap.put(key, (Currency)obj);
          return obejctMap;
     public void storeAll(Map mapEntries)
CLIENT PART
I connect to this cache using extend client with follwing config file,
<?xml version="1.0"?>
<!DOCTYPE cache-config SYSTEM "cache-config.dtd">
<cache-config>
     <caching-scheme-mapping>
          <cache-mapping>
                    <cache-name>ReferenceData-Cache</cache-name>
                    <scheme-name>coherence-remote-scheme</scheme-name>
          </cache-mapping>
     </caching-scheme-mapping>
     <caching-schemes>
          <remote-cache-scheme>
               <scheme-name>coherence-remote-scheme</scheme-name>
               <initiator-config>
                    <serializer>
                         <class-name>com.tangosol.io.pof.ConfigurablePofContext</class-name>
                         <init-params>
                              <init-param>
                                   <param-type>string</param-type>
                                   <param-value>TradeEngine-POF.xml</param-value>
                              </init-param>
                         </init-params>
                    </serializer>
                    <tcp-initiator>
                         <remote-addresses>
                              <socket-address>
                                   <address>169.39.30.182</address>
                                   <port>9001</port>
                              </socket-address>
                         </remote-addresses>
                    <connect-timeout>10s</connect-timeout>
                    </tcp-initiator>
                    <outgoing-message-handler>
                         <request-timeout>3000s</request-timeout>
                    </outgoing-message-handler>
               </initiator-config>
          </remote-cache-scheme>
     </caching-schemes>
</cache-config>
PROBLEM
From my test case (with extend client file as configuration), when i try to connect to get cache handle of this cache, as
refDataCache = CacheFactory.getCache("ReferenceData-Cache");
I get following error on server side,
2010-05-12 18:28:25.229/1687.847 Oracle Coherence GE 3.5.3/465 <Error> (thread=DistributedCache, member=2): BackingMapManager com.tangosol.net.DefaultConfigurableCacheFactory$Manager: failed to instantiate a cache: ReferenceData-Cache
2010-05-12 18:28:25.229/1687.847 Oracle Coherence GE 3.5.3/465 <Error> (thread=DistributedCache, member=2):
java.lang.IllegalArgumentException: No scheme for cache: "ReferenceData-Cache"
     at com.tangosol.net.DefaultConfigurableCacheFactory.findSchemeMapping(DefaultConfigurableCacheFactory.java:507)
     at com.tangosol.net.DefaultConfigurableCacheFactory$Manager.instantiateBackingMap(DefaultConfigurableCacheFactory.java:3486)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$Storage.instantiateResourceMap(DistributedCache.CDB:22)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$Storage.setCacheName(DistributedCache.CDB:27)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ConfigListener.entryInserted(DistributedCache.CDB:15)
     at com.tangosol.util.MapEvent.dispatch(MapEvent.java:266)
     at com.tangosol.util.MapEvent.dispatch(MapEvent.java:226)
     at com.tangosol.util.MapListenerSupport.fireEvent(MapListenerSupport.java:556)
     at com.tangosol.util.ObservableHashMap.dispatchEvent(ObservableHashMap.java:229)
     at com.tangosol.util.ObservableHashMap$Entry.onAdd(ObservableHashMap.java:270)
     at com.tangosol.util.SafeHashMap.put(SafeHashMap.java:244)
     at com.tangosol.coherence.component.util.collections.WrapperMap.put(WrapperMap.CDB:1)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid$ServiceConfigMap.put(Grid.CDB:31)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$StorageIdRequest.onReceived(DistributedCache.CDB:45)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onMessage(Grid.CDB:9)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:136)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onNotify(DistributedCache.CDB:3)
     at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
     at java.lang.Thread.run(Thread.java:619)
However, with this error also i am able to do normal put operation and get operation against those put.
But when i try to get the cache entry which doesnt exists in cache, like
refDataCache.get("CU-1");
I expected that call would go to RefDataCacheStore.load method. But in my case i dont see it happening.
Also i debugged my jvms in debug mode and i put a class load breakpoint for RefDataCacheStore, but even that is not hit. I have RefDataCacheStore in my server classpath.
Hope to see reply on this soon.
Thanks
Manish

Hi Manish,
<<previous advice deleted>>
user13113666 wrote:
Hi,
I have my server picking up the correct configuration files for "ReferenceData-Cache". In my local jconsole i could see that the service named "RefData_Distributed_Service" is started under service mbean. Also i am able to perform a put and get on "ReferenceData-Cache", i could even see StorageManager mbean showing my inserted entries for "RefData_Distributed_Service".With the local jconsole, are you monitoring the server/proxy node, or the TCP*Extend cleint node?
The client can have the service with the server still not having it.
Could you please post the startup log for the storage node on the server...
Best regards,
Robert
Edited by: robvarga on May 17, 2010 12:33 PM

When defining copy rules, only one source field allowed

Our users have requested the facility to allow them to copy pricing condition records when in in VK12 transaction. But when configuring the copy rules, we have come across the following problem:
When configuring copying rules for copying pricing condition records,
there is no possibility to use more than one source/target fields.
In our example, the condition table created for a certain pricing
access sequence contains keys such as Sales Organization, Sold-to Party
"and" Product Hierarchies level 1 to level 9 (e.g. PH1 - PH9) .
In the condition table definition, fields PH1 to PH9, although key
fields, are also defined as footer fields. This means that per sales
organization and sold-to party, we can create more than one condition
record based on different combinations of PH1 to PH9.
However when setting up copy rules for conditions in SPRO (SD -
Pricing Control - Copy Control for Conditions) to allow our users to copy the condition records, for a given Source /
Target table, the standard selection screen only allows us to define one Source / Target field.
In our case, this is not helpful. The configurator should be allowed
to select more than one source field (i.e. PH1 and PH2 and ..... PH9). At this moment,
we can only select as source field PH1 or PH2 or PH3., etc..
Steps for the Reconstruction:
- Run Spro.
- Select SD --> Pricing --> Pricing control --> Copy control for conditions -- > Copying rule for conditions
- Select 'New Entries'. Selection screen is displayed. The issue is that in this selection screen, the configurator is allowed to select only one source field. He should be allowed to select multiple fields.
Can you help us with this problem please?
Your help is much appreciated!
Edited by: C. Hassink on Feb 2, 2008 3:50 PM
Edited by: C. Hassink on Feb 2, 2008 3:52 PM
Edited by: C. Hassink on Feb 2, 2008 3:53 PM
Edited by: C. Hassink on Feb 2, 2008 3:55 PM
Edited by: C. Hassink on Feb 2, 2008 3:56 PM

Hi Ralph,
I don't like that methode. Importing the same transport 15 times, each time changing the source-system mapping and making sure, that source-system gets the changes seems to be a huge source of errors, which will be hard to find.
What do you think of the following idea to solve the issue a totally different way:
All transfer-rules directly connected to the source-systems are stripped of all Coding, so there is a plain 1 by 1 transformation including 0logsys.
The InfoSources attached all lead to one ODS-Object, which has the only purpose to collect the data from the source-system without any transformation. So some fields a filled by a system and other fields maybe not.
The coding specific for source-systems is moved to transfer- / update-rules from that ODS-Object to the original ODS-Objects / Cubes and the "collecting" ODS-Object is emptied after every loading process.
This will result in a single point of change. It will be quite a huge program (maybe in startroutine) but it's the one and only point, where changes and corrections have to be made.
Regards
Robert

Copy rule

Hi
What is "copy rule" in condition record? How to use it.
Thanks in advance

Copy rule for conditions determines:
1. Which source condition type can be copied to a target condition type.
2. Which table in the source condition type can be copied to which table in target condition type.
3. Requirements and limitations.
Source and target field serves as copy strategy, standard system only predefined two: from customer to customer(s), from material to material(s).
As an example, you want to define a rule to make it possible to copy PR00 (rarely happens): Go to pricing - pricing control copy control for conditions - Copying rule for condition types VB(C. Then add new entry: source condition type PR00 and target PR00.
Then we go to VB(B to set the rule which table in access sequence of PR00 can be copied. since access sequence is pr02 containing tables 304,305, 306. We pick from table 305 to 305, field KUNNR to KUNNR, so that condition record 305 can be copied form a customer to another customer(s). We can set default rule for the table as well.
This is not in real business, only a logic for you to understand..

Copying rules for conditions do not contain V 1 090 2 entry

Similar Messages

Maybe you are looking for