Copying standard report transaction selection screen

Hi everybody,
How can we copy standard report transaction's VI05 selection screen to my custom report transaction's selection screen some zprogram . The problem is that when i am copying the selection screen into my programs screen, it is getting copied, but not as selection screen rather as normal screen. I have defined a transaction code for the same with the custom screen no as the selection screen but its giving a message that selection screen 9001 doesn't exist. However if i keep the selection screen as 1000 the screen in the standard transaction VI05 the transaction is executing fine.
But again the problem was that although it seems that the screen 1000 of the standard program for VI05 has been copied to my custom program but its not showing in the object list of my custom program. so I cannot do any changes which i require.
If anybody requires any clarification u can raise your doubts i will try to make it more clear.
Can any body help me with this?
Your help will be deeply appreciated.
Thanks a lot!
Best Wishes!
Regards
Prem

Hi Prem,
Even if the GUI Status is active, you cannot see two components of Standard Selection Screen.
1. All Selections - Push Button
2. Categories - Screen Block in the first with two options
2.1. OI_STAND
2.2. OI_BULK
This is becoz, there are enhancement spots included in the Standard program and the enhancement spots will not be copied, unless you copy them manually.
Check the same.
Regards,
-Syed.

Similar Messages

I want to change the selection text in the standard report/transaction .

I have added one screen field to the standard report , now i want to change the selection text in the standard report/transaction

Hi,
>
scoy123 wrote:
> I have added one screen field to the standard report , now i want to change the selection text in the standard report/transaction
Refer:-
CONSTANTS : c_comment(20) TYPE c VALUE 'write your comment'.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(20) c_comment.
PARAMETERS : p_matnr TYPE matnr.
SELECTION-SCREEN END OF LINE.
Hope this helps you.
Regards,
Tarun

RESCIS - Unable to select custom report from Selection Screen

Hi all,
we have developed a custom report for transaction "RESCIS-Evaluation of service charge settlement" but we have found that althought the report appears in selection screen field called "REPORT" it throws message RESCIS003 but the report is not shown.
If we doesn't fulfill report field in selection screen, the program shows a second screen where a couple of ALVGrids are shown allowing the user to select the report that will be displayed. Here we are able to select our custom report and the data in it is displayed.
We have analyzed the standard program that is executed via transaction RESCIS and we've found that the selection screen executes standard function RESC_GUI_ANYREPORTS_APPL that doesn't executes reports dinamically but statically. That means that SAP doesn't allows to execute custom reports directly from selection screen.
I think this is a SAP error but afert opening an OSS message SAP sais that is not an error but a bad configuration or lack of knowledge for customizing it.
Has anyone developed a custom report for RESCIS transaction?

Hm what exactly did you want to change? Normally it is in REFX cases you should not copy standard REPORTS. In your case with transaction RESCIS, I myself do not see any need to add any functionality in this report because it is only a sum of all lists from your service charge settlement. What else do you want to see there?
For displaying new fields in the separate lists maybe there is some BADI for it.
Regards
Michael

Prob in Submit Report via Selection screen.

Hi,
I have to submit a report via selection screen.
The report name is detemined at run time.
This i am able to handle easily as we can use SUBMIT (V_PROG)...
 WHERE V_PROG contains the name of the report that i get at runtime...
Now the issue :::::::
I have to also populate a select-options on the called report on submit.
usually this is done by :
 SUBMIT (V_PROG)
 name of select-option in itab...
However in my case the name of the <name of select-option> is also detemined at runtime say PNPPERNR.
Now if i use any variable / field symbol for the name of the select - option (like for the called program), it does not work (the called report does not have the values i populate in ITAB for the particular select-option)
I have also tried Macro but cant find solution...
ANY IDEAS ??

Hi Anuj,
When you are getting the report name in runtime, you can also get the report selection screen information during runtime.
Now how are you going to decide which values you will move to which selection screen variables of which report? If you have a way to determine this, then here is a program that works on that assumption.
REPORT ztest1 .
DATA: i_seltab TYPE TABLE OF rsparams WITH HEADER LINE,
 i_selections_info TYPE TABLE OF selinfo WITH HEADER LINE.
DATA: v_report LIKE sy-repid,
 v_matnr LIKE mara-matnr.
PARAMETERS: p_rep1 RADIOBUTTON GROUP rad DEFAULT 'X',
 p_rep2 RADIOBUTTON GROUP rad.
SELECT-OPTIONS: s_matnr FOR v_matnr.
START-OF-SELECTION.
IF p_rep1 = 'X'.
*-- some criteria to determine the name of the report
 v_report = 'ZTEST2'.
ELSE.
 v_report = 'ZTEST4'.
ENDIF.
*-- get the parameters for the report
CALL FUNCTION 'RS_SELECTIONS_DESCRIPTION'
 EXPORTING
 report = v_report
 TABLES
 selections_info = i_selections_info
 EXCEPTIONS
 no_selections = 1
 report_not_existent = 2
 subroutine_pool = 3
 OTHERS = 4.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT i_selections_info WHERE name = 'S_MATNR'.
*-- some criteria based on which, move the values from this program
* to the called program
 CLEAR i_seltab.
 i_seltab-selname = i_selections_info-name.
 i_seltab-kind = i_selections_info-kind.
 i_seltab-sign = 'I'.
 i_seltab-option = 'EQ'.
 i_seltab-low = s_matnr-low.
 i_seltab-high = s_matnr-high.
 APPEND i_seltab.
ENDLOOP.
IF NOT i_seltab[] IS INITIAL.
 SUBMIT (v_report) VIA SELECTION-SCREEN
 WITH SELECTION-TABLE i_seltab .
ENDIF.
If this works for you, please reward and close the post.
Regards,
Srinivas

Run alv report without selection screen in background

Hello Every body,
i programmed a ALV Report without selection screen, and i want to create a job for this alv report.
Any help?
Thank u.
Ouail.

Hi Steve,
Can you tell me where i have to put your code?
this is my abap code:
START-OF-SELECTION.
 p_filref = '\\SAPSERVER\f\SAFT\ivat\FI_Extract_1000_20140709_102346_910.XML'.
 PERFORM copy_from_xml_to_itab TABLES it_ref_file
 ref_xml_data
 USING p_filref.
**Begin Extraction File
 SUBMIT ZZ_FI_IVAT_EXTRACTOR
 WITH p_bukrs EQ '1000'
 WITH p_gjahr EQ '1998'
 WITH filepath EQ '\\SAPSERVER\f\SAFT\iVAT_Extractie\'
 WITH cldata eq space
 AND RETURN.
 DATA: FILE_TABLE TYPE TABLE OF SDOKPATH,
 DIR_TABLE TYPE TABLE OF SDOKPATH.
 CALL FUNCTION 'TMP_GUI_DIRECTORY_LIST_FILES'
 EXPORTING
 DIRECTORY = '\\SAPSERVER\f\SAFT\iVAT_Extractie\'
 FILTER = '*.*'
 TABLES
 FILE_TABLE = FILE_TABLE
 DIR_TABLE = DIR_TABLE
 EXCEPTIONS
 CNTL_ERROR = 1
 OTHERS = 2.
 IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 "get file name
 LOOP AT FILE_TABLE INTO p_filref.
 ENDLOOP.
 CONCATENATE '\\SAPSERVER\f\SAFT\iVAT_Extractie\' p_filref INTO path.
 PERFORM copy_from_xml_to_itab TABLES t_ext_file
 ext_xml_data
 USING path.
 PERFORM fill_xml_tab_in .
 perform build_fieldcatalog.
 PERFORM compare_data_ref_ext.
 PERFORM send_email.
 perform display_alv_report.
 PERFORM delete_extraction_file.
in the perform copy_from_xml_to_itab TABLES it_ref_file......, i use this code:
 CREATE OBJECT gcl_xml.
*Upload XML File
 CALL METHOD gcl_xml->import_from_file
 EXPORTING
 filename = p_filref
 RECEIVING
 retcode = gv_subrc.
 IF gv_subrc = 0.
 CALL METHOD gcl_xml->render_2_xstring
 IMPORTING
 retcode = gv_subrc
 stream = gv_xml_string
 size = gv_size.
 IF gv_subrc = 0.
 REFRESH gt_xml_data[].
* Convert XML to internal table
 CALL FUNCTION 'SMUM_XML_PARSE'
 EXPORTING
 xml_input = gv_xml_string
 TABLES
 xml_table = gt_xml_data
 return = gt_return.
 ENDIF.
 ENDIF.

Call a report with selection screen as subscreen.

Hi all,
i need to Submit And Return a Report having some parameters and Select options, from a Function Module.
all i want that the Selection Scrren of Report should appeared as Subscreeen, so that Calling Screen sould be visible in Background.
Is this Possible , if yes then How ?
thanks in advance,
Nitin

Running new report means opening new internal session. This can't be embeded within the current internal session where your function group (function module specifically) runs. So there is no such a way which you could run a report inside a subscreen area.
If you however want only selection screen of the report to be embeded inside your subscreen area (not run) you can use
"report Z_SUBSCREEN_REPORT
SELECTION-SCREEN BEGIN OF SCREEN 0200 as SUBSCREEN.
PARAMETERS pa type c.
SELECTION-SCREEN end of SCREEN 0200.
"main screen's flow logic in function group with subscreen area
PROCESS BEFORE OUTPUT.
call SUBSCREEN area INCLUDING 'Z_SUBSCREEN_REPORT '0200'.
Regards
Marcin

Report Painter selection screen field modfication?

Hi Buddies,
I want to modify the report painter selection screen.
There is one field manadatory on the selection screen . I want to make it as optional.
Please let me know if any one knows.
Waiting for your response..
Regards,
Vijay

Hello sir,
Some one did the code. Now iam modifying this report painter selection screen.
I would like to know where the field definition will take place in report painter.
Regards,
Vijnay

Copying Standard Reports including enhancements

Dear All,
Im tried to copy standard report mb5b but enhancements in that is not getting copied.
Please guide me.

Hi Dilip,
Which enhancements are you talking about ?
I dont see any enhancement in program RM07MLBD.
Best regards,
Prashant

Hiding a selection screen field for Standard Report Transaction

Hello All,
We are trying to hide a check box on the selection screen for a standard sap report transaction (s_alr....). We can hide it by creating a variant but then if the users don't select it, the checkbox will be visible. We can't use transaction variant to hide this since its not a dialog transaction.
We don't want any users to select that option by clicking on the checkbox and then running the report. Any suggestions or help is much appreciated.
Thanks,
Sal

Did you think about modifying the standard report by adding NO-DISPLAY to the parameter option?
If you are not allowed to modify another option - although much more effort - would be to replicate the standard selection screen in an own Z-report and at the end do a SUBMIT standard report WITH parameter
In your won report you can easily hide that parameter and always pass a space to the standard report.
To submit data to the standard report just use
DATA: lt_par TYPE TABLE OF rsparams.
build the selection table based on the selection criteria the user entered and do:
SUBMIT rep USING SELECTION-SCREEN 1000
WITH SELECTION-TABLE lt_par.
Then just remove access to the standard transaction and create an own transaction for your custom report which is added to the users authorized transactions.
Not the easiest way to do it, but it does work.
Regards,
Michael

Copy standard report

hi all,
I have copied the standard program GP49GVYDGHSFRBGM9CYT2E1I1S2 (assigned to the transaction code S_ALR_87012168) to the custom program ZFI*****, Could you please let me know how to configure the custom program to the node FBRD01RFRRD20 0SAPDUEAN-01 report type RE, with the new Extended Program Name so that I can use the same (i.e. the node report type and Extended program name) to assign it to new Transaction code (to have the same functionality as the standard transaction S_ALR_87012168).
Please do comment and thanks a lot.

Hi anuar,
Once you have copied the Standard report to ZFIxxxxx then proceed as follows:
1. Go to SE93 and input the Z TCode name and click on Create
2. Provide the Description and selelct the radio button Transaction with parameters (parameter transaction) and Press Enter
3. Under Default Values for there is an input field Transaction. Input START_REPORT
4. In the bottom of the screen you can see two columns Name of screen field and Value
5. Input the following with out any change
*Name of screen field*                         *Value*
D_SREPOVARI-REPORTTYPE             RE
D_SREPOVARI-REPORT                    ZFIxxxxxx "(Your custom report which you copied from standard)
D_SREPOVARI-EXTDREPORT            FBRD01RFRRD20                       0SAPDUEAN-01
6. You'll be presented with another selection screen. Here simply press Enter
Here you go with the same functionality as that of the S_ALR_87012168. Hope these steps resolves your problem. Reward accordingly.
Thanks and Regards,
Maddineni Bharath.

Copied standard report shows error.

i just copied the standard report RM07DOCS TO YRM07DOCS
AND EXECUTED.
IT SAYS LAYOUT /GR VKP DOES NOT EXIST FOR YRM07DOCS.
and if i execute without giving any layout , it shows only few fields of output
PLEASE tell ME TO SOLVE THE PROBLEM to get the layout , and complete output..
Edited by: Dastagiri on Dec 7, 2011 4:30 AM

Dastagiri wrote:
i just copied the standard report RM07DOCS TO YRM07DOCS
> AND EXECUTED.
> IT SAYS LAYOUT /GR VKP DOES NOT EXIST FOR YRM07DOCS.
> and if i execute without giving any layout , it shows only few fields of output
>
> PLEASE tell ME TO SOLVE THE PROBLEM to get the layout , and complete output..
>
> Edited by: Dastagiri on Dec 7, 2011 4:30 AM
Hi,
How did you copy your report? Check if there are includes in program RM07DOCS and it is copied in you Z report.
Also, check if your selection is made thru Screen-painter?
Reetesh
Edited by: Reetesh on Dec 7, 2011 5:40 AM

Add fields in KOB2 & KSB2 report in selection screen as well as output

Dear All,
I have an issue in which i have to add fields in KOB2 & KSB2 report.
i need to add below fields to KSB2 report.
1) Internal order
2) Vendor
3) Purchasing group
I also need to add profit centre in selection screen for KSB2
Similarly for KOB2 i need to add below fields
1) Cost centre
2) Vendor
3) Purchasing group
I also need to add cost centre as input for KOB2 report.
I have gone through note 325546 "CO line item reports: Creating a user-defined field" which can be helpful.
However i am not sure as to how do i add fields in input screen as required.
Other alternative is to create a Z report however when i try and copy the report both KOB2 & KSB2 call same report "RKAEP000".
I am not able to get as to how do i differentiate the call of different screens when ZKOB2 is called or when ZKSB2 is called.
I could identify " c_item_group" field having different values however i couldnot get a proper logic as to how correct screen can be called based on input
Please suggest .
Thanks,
Ronak

Hi Raymond,
The note 747588 is good as soon as you are adding fields from the same table only.
When I have added additional table into KAEP_SCOVP selection view below COVP (just because the extra fields I need are not in COVP) they will show up in KOB1 as selection criteria, but not getting saved.
Any idea if any ABAP should be regenerated or what extra steps are required when adding more tables into Selection View?
Thank you!

Report Groups - Selection screen on receiver report

Hi there,
When dealing with sender / receiver reports, do you know if it's possible to force a selection screen prompt when calling a receiver report during execution?
A report was written in the Report Painter, and belongs to a report group called 1OAB. This report group has three receiver reports defined, so when users double click on a value, it will forward navigate to another report (receiver report, selected after double click) using the same selection criteria of the current report (sender).
My problem, is that the selection criteria that is passed by the sender isn't sufficient for the receiver report, and the report ends up running with a much larger selection than required.
My question, is whether or not we can either:
a) Interrupt during the report call and prompt with the report selection screen for the receiver report. This would allow the user to input any missing selections.
b) Add in any missing selections via a user exit. I have not had much luck in finding such an exit. The closest I got was form 'USEREXIT1' from include LRSTIF90. This exit appears to be called before and after the report call. I'm not sure if it's a true exit though, as it's just a piece of code in an include and is referred to as an exit? To implement would I just register the object and add in my code?
Any suggestions would be appreciated!
Thanks,
L

FYI the only solution I see is to put in a modification to prompt a selection screen during execution. Modification would go in include 'LRSTIF02' as follows:
PERFORM report_check_obligatory TABLES it_fieldr
 USING flg_obl.
** MODIFICATION **
if ld_tcode = 'FBL3N'.
 flg_obl = 'X'.
endif.
** END MODIFICATION **
IF flg_obl IS INITIAL.
 CALL TRANSACTION ld_tcode AND SKIP FIRST SCREEN.
ELSE.
 CALL TRANSACTION ld_tcode.
ENDIF.
* clear parameter ids
* perform clear_pid_fieldr tables it_fieldr it_dfies.
PERFORM reset_pid_fieldr TABLES it_fieldr it_selpid.
* if flg_return = 'X'.
* call transaction ld_tcode and skip first screen.
* else.
* leave to transaction ld_tcode.
* endif.
ENDFORM.
If anybody has a better idea on how to accomplish this I'd love to hear it!
Thanks,
L

Creation of spool request for a report without selection-screen.

Hi Experts ,
I need to create a spool request for ALV Grid report which is not having any selection-screen , after pressing F8 it will directly display the ALV Grid out put.
Can any one help me how to run the above report in background which is not having selection-screen?
Thank you & Regards.
Rajasekhar.P

HI,
At transaction SE38 click Program -> Execute -> Background.
Regards
Sudheer

How to create a report with selection screen that can run in background

Sorry to ask these basic questions but I am knew to ABAP Programming.
To keep it simply, I am attempting to create a report that has a simple parameter driven selections screen with one field. That field takes in a folder path from the user. The user executes the report. The report creates a simply BDC that goes into SE16, gathers data from a table, and exports the results to a text file using the folder path provided. I created a variant for the folder path field in the selection screen hoping to use it while executing the report in the background. The report is not exporting the file as it did when run in the foreground for some reason.
I am wondering what event is triggered when a report is executed in the background. In the foreground (or when I execute the program via SE38->Execute->With Variant) the user needs to execute the program by hitting the execute button once the variant has populated the folder path field. It works then, so I am trying to get the same to work in the background. I am thinking I didn't put the program together correctly to accommodate the running in the background. How can you create a report that can accept user input via variant into a selection screen and then run in the background?
Please, any information would be greatly appreciated.
Thanks you all for reading this!!!

Ok, finally I understand what you're doing. Initially you lost me with the SE16 reference...
Not sure what you're trying to achieve overall, but apart from the fact that you cannot export/download a file to a user's PC via background job (unless you have a mapped network share on the server or something like an FTP server on the user's PC, but both are pretty hypothetical scenarios and unlikely to occur).
Also, the BDC approach to get data via SE16 is pretty awkward. Note that SE16 is guarded by some authorization checks and often users won't have access in production (which might not matter if you intend to always run your program in background via dedicated batch user). However, I have no clue why you wouldn't want to use [open SQL|http://help.sap.com/abapdocu_70/en/ABENOPEN_SQL_READING.htm] to read the data. You could then save it on the application server or if you really have to get it to the user you can consider e-mailing the file (extracts should be compressed before sending). For the latter you'll find plenty of references here, basically it's the [business communication services|http://help.sap.com/saphelp_nw2004s/helpdata/en/2d/1c5d3aebba4c38e10000000a114084/frameset.htm] that you'd need to look at.

Copying standard report transaction selection screen

Similar Messages

Maybe you are looking for