Copying Standard Reports including enhancements

Dear All,
Im tried to copy standard report mb5b but enhancements in that is not getting copied.
Please guide me.

Hi Dilip,
Which enhancements are you talking about ?
I dont see any enhancement in program RM07MLBD.
Best regards,
Prashant

Similar Messages

Copying standard report transaction selection screen

Hi everybody,
How can we copy standard report transaction's VI05 selection screen to my custom report transaction's selection screen some zprogram . The problem is that when i am copying the selection screen into my programs screen, it is getting copied, but not as selection screen rather as normal screen. I have defined a transaction code for the same with the custom screen no as the selection screen but its giving a message that selection screen 9001 doesn't exist. However if i keep the selection screen as 1000 the screen in the standard transaction VI05 the transaction is executing fine.
But again the problem was that although it seems that the screen 1000 of the standard program for VI05 has been copied to my custom program but its not showing in the object list of my custom program. so I cannot do any changes which i require.
If anybody requires any clarification u can raise your doubts i will try to make it more clear.
Can any body help me with this?
Your help will be deeply appreciated.
Thanks a lot!
Best Wishes!
Regards
Prem

Hi Prem,
Even if the GUI Status is active, you cannot see two components of Standard Selection Screen.
1. All Selections - Push Button
2. Categories - Screen Block in the first with two options
2.1. OI_STAND
2.2. OI_BULK
This is becoz, there are enhancement spots included in the Standard program and the enhancement spots will not be copied, unless you copy them manually.
Check the same.
Regards,
-Syed.

Copied standard report shows error.

i just copied the standard report RM07DOCS TO YRM07DOCS
AND EXECUTED.
IT SAYS LAYOUT /GR VKP DOES NOT EXIST FOR YRM07DOCS.
and if i execute without giving any layout , it shows only few fields of output
PLEASE tell ME TO SOLVE THE PROBLEM to get the layout , and complete output..
Edited by: Dastagiri on Dec 7, 2011 4:30 AM

Dastagiri wrote:
i just copied the standard report RM07DOCS TO YRM07DOCS
> AND EXECUTED.
> IT SAYS LAYOUT /GR VKP DOES NOT EXIST FOR YRM07DOCS.
> and if i execute without giving any layout , it shows only few fields of output
>
> PLEASE tell ME TO SOLVE THE PROBLEM to get the layout , and complete output..
>
> Edited by: Dastagiri on Dec 7, 2011 4:30 AM
Hi,
How did you copy your report? Check if there are includes in program RM07DOCS and it is copied in you Z report.
Also, check if your selection is made thru Screen-painter?
Reetesh
Edited by: Reetesh on Dec 7, 2011 5:40 AM

Copy standard report

hi all,
I have copied the standard program GP49GVYDGHSFRBGM9CYT2E1I1S2 (assigned to the transaction code S_ALR_87012168) to the custom program ZFI*****, Could you please let me know how to configure the custom program to the node FBRD01RFRRD20 0SAPDUEAN-01 report type RE, with the new Extended Program Name so that I can use the same (i.e. the node report type and Extended program name) to assign it to new Transaction code (to have the same functionality as the standard transaction S_ALR_87012168).
Please do comment and thanks a lot.

Hi anuar,
Once you have copied the Standard report to ZFIxxxxx then proceed as follows:
1. Go to SE93 and input the Z TCode name and click on Create
2. Provide the Description and selelct the radio button Transaction with parameters (parameter transaction) and Press Enter
3. Under Default Values for there is an input field Transaction. Input START_REPORT
4. In the bottom of the screen you can see two columns Name of screen field and Value
5. Input the following with out any change
*Name of screen field*                         *Value*
D_SREPOVARI-REPORTTYPE             RE
D_SREPOVARI-REPORT                    ZFIxxxxxx "(Your custom report which you copied from standard)
D_SREPOVARI-EXTDREPORT            FBRD01RFRRD20                       0SAPDUEAN-01
6. You'll be presented with another selection screen. Here simply press Enter
Here you go with the same functionality as that of the S_ALR_87012168. Hope these steps resolves your problem. Reward accordingly.
Thanks and Regards,
Maddineni Bharath.

Copy Standard monitor and enhance the paramter list

/people/johannes.fleig/blog/2009/06/22/best-practice-business-process-monitoring-for-order-to-cash
Kindly go through the conversation at the end of the presentation

Alnoor,
you question seems to be related to a feature of the Solution Manager.
This forum is meant for questions about the SAP NetWeaver Business Process Management product which was introduced with SAP NetWeaver CE 7.1 EhP1.
I think you question would be better served over in the [SAP Solution Manager forum|SAP Solution Manager;.
Best regards,
Oliver
Edited by: Oliver Goetz on Jun 29, 2009 4:15 PM

Including Vendor Name in Standard report 'MB51' transaction

Hi Friends,
I have a requirement of Displaying the Vendor Name in the standard report 'MB51', after the vendor No.
I checked the report and it is really confusing ..... ( i ve seen something like when i double click the document number it is going to 'Display material Document - 147404608' something !! ........
I want the same report with vendor name included ... is that possible ????
One more doubt .... i actually copied the Program 'RM07DOCS' with the includes to a name 'ZRM07DOCS' but when i execute with plant '0020' iam getting an error 'Selection was not restricted' though iam not getting the error when i give the same selection criteria in the Standard report....
Expecting ur replies :-|
Thanks in advance
Cheers,
R.Kripa.

Hi,
I did similar requirement but in my case the tr code was mb5b but anyway approach would be same ,please check steps below.
1) Copy standard report to a Zreport. copy everything including includes , texts etc.
2) Now put a break point at REUSE_ALV_LIST_DISPLAY , it might be possible that its used multiple times. so just cross check which list display is showing results.comment out this REUSE_ALV_LIST_DISPLAY.
3) Now say you have to add 2 extra fields to report.define you own internal table with all the fields you needed.move the final internal table to your internal table.
4) build your own field catalog for your internal table.
4) using select queries fetch field values of those 2 extra fields for each record.and then use resue_alv_list_display or resue_alv_grid_display in place of original list_display. pass fieldcatalog and your final internal table to it so as to get output desired.

How to Enhance the Standard Report?

Hi All,
How to Enhance the Standard Report? :
When I am trying to execute the query called ZTIMES in the user group SQ01 it is navigating the screen to selection-screen with some inputs to be given here on the selection screen company code is mandatory as an input. The company code field is having the search help and it is fetching the values for the company code from table called PROJ Table (Project definition Table).But I want the company code should fetch the value from the PRPS Table ( Work break structure(WBS Element) Level).
Tables used are PROJ and PRPS.
The company code in PROJ is PROJ-VBUKR
In PRPS is PRPS-PBUKR
In the coding part related to that selection screen I have to replace PROJ-VBUKR with
PRPS-PBUKR.But it is standard report to enhance.
What is suggestible solution for this issue?
Thanks,
M Raju

Hi,
Since this is an ABAP Query, You can change the infoset query in SQ02 and establish the join linkages between PROJ and PRPS
Also on the selection screen of the Query make sure you provide company code from PRPS table and report output also from the same table reference.
Once you have modified the ABAP Query, activate and generate it so that it will internally regenerate the a standard program.
http://help.sap.com/erp2005_ehp_02/helpdata/en/d2/cb4256455611d189710000e8322d00/frameset.htm
ABAP Query (Sq01)Modification
Hope this helps
Regards,
Shiva

How to copy standard SAP report to a Z report?

Hi All,
Guys, I have a requirement to copy an standard SAP report and make some changes to it. Please let me know how to copy a standard SAP report as a Z report. Is there any simple way or will I have to open the source code and copy it into the new Z program? If that is the case, how will I copy the screens and related PBO/PAI events?
Please provide me a step-by-step solution.
Thanks & Regards,
Madhur

Hello Madhur,
As Raja had said, yuo could just copy the program from SE38. But just remember a few points:
1. If the standard report is being used in some other programs, then there's no way you can make your Z-report get used in all such instances. I suspect that you may not want to do that anyways, but just in case.
2. Just also check out if the standard report you're talking about has any INCLUDE programs within it. If there are too many standard INCLUDEs in the main report, then you might have to decide whether you need to copy all of them too, or let them be as they are.
3. You are likely to have some problems with the text-elements and translation that may have been maintained for the original report.
I have experienced some problems with respect to the second and third points in the past, so it is worth it to be a bit careful.
Regards,
Anand Mandalika.
Regards,
Anand Mandalika.

How to copy Report(including text symbols and Selection text) in Local file

Hi,
I have developed a Report in my testing system (Company dummy system) which contains lot selection text and Text symbols.
Is there any program that will copy that prohram along with all selection text and text symbold and save it on the floder and form the same program or different program i can upload program??
for example SAP has standard program RSTXSCRP from which i can export and import SAP Script to and from local file or system.
Please let me know at the earliest.
Regards,
Prasanna

HI,
For scripts only that option is avaible in SAP.
For reports u can copy that report to another name otherwise release the request no and transport to one system to another system.
Final option is u have to save to one local file (green color icon) after that in which system, u want to upload the report means u have to create new report and upload it including selection-text itself.
Thanks,
Shankar

Enhance the standard report

Can anybody answer
Hi SDN's
I had inserted a new Z-field in the table ANLA, and in transaction AS02
Now i need to enhance the report RABEST01 - Asset Balances, to insert the new field in the report output of RABEST01.
Can anyone show me the way to it?
Points assured
Regards
Pratyusha

Hi Pratyu,
I have checked the standard report and there are no explicit calls for any type of enhacements like Customer Exits, BADIs or Enhancement-points / Sections .
Thus the options you have at your hand are either to modify the tsandard code or to copy the standard to a Z development and do the necessary changes.
regards,
Vikas

Copy and add standard report

I have a request to add few column in the standard report (T-code F.19, program, RFWERE00), so i copy the program and proceed modification, when i check the code, it has error. I would like to know can I have any solution to add column into the report. Thanks!

hi
make changes in ur list_item table then u wll get the required output in ur tcod
hey the ouptput is comging for me
with Regards
Rohan Shetty
Edited by: Rohan Shetty on May 7, 2008 6:41 AM

SAP Standard Report: Trial balance that include trading partner

Good Morning Guru's-
To avoid creating a custom report, does anyone know of a standard SAP report trial balance that includes trading partner?
Thank you.
Points will be awarded promptly!

Hi
You can use Trading partner in the selection screen but not in the output in standard reports
If you populate Trading partner in the dynamic selection, output you will get only specific to that trading partner
Reg
Vishnu

How to enhance standard report RPLICO10

Hi,
I want to add two fields in field selection in standard report RPLICO10 ( ECC 6.0 )
1. IT 0105 - subtype 0001
2. IT 0105 - subtype 0010
these fields are not present in selectable fields under field selection.
kindly suggest how to do it
Can we do it in standard report or we have to create customized copy of it ?

Hi Lalit,
Instead of getting the fields on the selection screen, try this, on the selection screen click on the option search help. From the displayed list choose U - System user name. This helps you filter the hit list based on infotype 0105. You can enter the subtypes under Communication type and enter the various values you want to run the report for in ID/number.
Regards,
Priya.

Copying user specific layout of standard report to some user ids.

Hi ,
I am using user specific layout of standard report in my customizing report for retrieving data from standard report.
i want to copy this user specific layout of standard report to some end user user ids.
if any body successfully solved this isseue previously, please help me to sort out this .
Thanks & regards,
Hari priya

hi sadaram,
Thanks for ur quick reply,
I am using this user specific layout in my zreport for retrieving data from std report. i don't want this layout to be global for all users. i already created same layout in production also , but i want to copy this user specific layout to some of end users
( not all end users) with different user names.
please suggest any solution to solve this issue..
regards,
Hari priya

Copying standard prog to custome program with includes that includes hd inc

Hi gurus,
i got one requirement,
I have to copy standard program to custome program with includes ,that includes con tain few more includes. so how can i copy all the includes into the custome progam.
please tel me.

Hi Vijayam,
In SE38, give the name of the standard program, in menubar goto program -> copy, which will take you to a pop up, check the checkbox for 'INCLUDES' to copy all the standard includes. But this will not copy the custom includes(starting with Z). To copy the custom include, you need to create new include in your copy program.To create a new include, click on icon 'Display Object List' which will display the objects list for your program, now right click on your program name in this list and select CREATE-> INCLUDE. Give the name of include and now copy the code from standard program include to your include.
I hope your problem is solved now.
Regards,
Pranjali

Copying Standard Reports including enhancements

Similar Messages

Maybe you are looking for