Copying table rows from one table to another table form
Hi
I have a problem about Copying table rows from one table to another table form.On jsf pages if you enter command button go anather jsf page and it copy one row to another table row. But when i execute this process for table FORM it doesn't copy I wrote a code under "createRowFromResultSet - overridden for custom java data source support." Code block is:
ViewRowImpl value = super.createRowFromResultSet(qc, resultSet);
try{
AdfFacesContext fct = AdfFacesContext.getCurrentInstance();
Number abc = (Number)fct.getProcessScope().get("___");
value.setAttribute("___",abc);
}catch(Exception ex){System.out.println(ex); }
return value;
Table may be copied with the
expdp and impdp utilities.
http://www.oracle.com/technology/products/database/utilities/index.html
Similar Messages
-
Passing Multiple table row from one view to another view
Hi,
How to Passing Multiple table row from one view to another view in Web Dynpro Abap. (Table UI Element)
thanx....Hi Ganesh,
Kindly do search before posting.. this discussed many times..
First create your context in component controller, and do context mapping in two views so that you can get values from
one veiw to any views.
and for multiple selection, for table we have property selection mode.. set as multi and remember context node selection
selection cardinality shoud be 0-n.
so, select n no of rows and based on some action call sec view and display data.( i think you know navigation between veiw ).
Pelase check this...for multi selection
Re: How to copy data from one node to another or fromone table to another table
for navigation.. check
navigation between the views
Cheers,
Kris. -
How to transfer table data from one client to another client?
How to transfer table data from one client to another client?
Hi,
Look at the Blog
/people/community.user/blog/2007/01/07/transport-table-entries
Regards
Sudheer -
How can I copy cell formatting from one range to another?
How can I copy cell formatting from one range to another, including text fonts, colours, borders, etc., so that, for example, I can reuse a formatted reconciliation table again in different parts of a sheet?
Hi George,
Wayne found the Spinning Beachball of Death, and you will find it too.
Numbers is not good at handling large datasets. Might I suggest that you group your data into smaller sets (each month, perhaps?) and save each group in a separate Numbers document. Numbers will not link between documents, but you could have a summary Table within each document. Then comes the "clunky" bit of copying all those summary tables into a master document where you do the final processing of the data.
Regards,
Ian. -
Error while copying GL Accounts from One Client to another client
Hi,
We are trying to copy GL accounts created in one client to another client (Company Code is same in both the clients). First we executed FS15 (send) and a file was created on the server. With the help of BASIS team we checked that file and it contained the required values. However, when we are doing FS16 (receive) we are getting following OK messages:
File /usr/sap/DEV/SYS/global/FBISABC is being checked
Session 1 session name RFBISA20 : No terminations have been found
However, at the same time we are getting following error message:
File name FI_COPY_COMPANY_CODE_DATA_FOR_GENERAL_LEDGER_0X is unknown
Message no. SG001
Diagnosis
No entry was found in the conversion table for the logical file name FI_COPY_COMPANY_CODE_DATA_FOR_GENERAL_LEDGER_0X.
Procedure
Add an entry to the conversion table for the logical file name. Maintain the conversion table with the transaction SM30.
Can someone please advice is there something wrong that we are doing for copying GL accounts from one client to another client.
Thanks,
SanjayDear Sanjay,
Did you check the batch-input? SM35
It could have happend that there was a mistake in the batch-input data and that the destination file has not been written. If this has not been written it could not be found. (I.E. you tried to transport G/L Accounts with deletion flags but did activate the checkbox "Transfer deletion ****").
There is another point: Did you activate the box "Datei nur prüfen" (English: Check file only)? If this box is activated the programm will check if the batch-input-file will be written without mistakes but it will not write the file. Only if the checkbox is not activated the batch-input-file will be written. (the same with FS16).
Kind regards
Maike
Edited by: Maike Nemeyer on Dec 1, 2011 8:52 AM
Edited by: Maike Nemeyer on Dec 1, 2011 11:45 AM -
HOW TO GET THE SELECTED VALUE IN A ROW FROM ONE VIEW TO ANOTHER VIEW?
hi all,
I have a small issue.
i have created two views.In the table of the first view i'm selecting a row and pressing the button it will move to next view.
i am adding some fields manually in the table of the second view and pressing the save button.Here all the values should get updated corresponding to the field which i have selected in the first view.
I want to know how to get the particular field in the selected row from one view to another view.
Kindly help me.Hi,
Any data sharing accross views can be achiveved by defining CONTEXT data in COMPONENT CONTROLLER and mapping it to the CONTEXT of all the views. Follow the below steps.
1. Define a CONTEXT NODE in component controller
2. Define same CONTEXT NODE in all the views where this has to be accessed & changed.
3. Go to CONTEXT NODE of each view, right click on the node and choose DEFINE MAPPING.
This is how you map CONTEXT NODE and same can be accessed/changed from any VIEW or even from COMPONENT CONTROLLER. Any change happens at one VIEW will be automatically available in others.
Check the below link for more info regarding same.
[http://help.sap.com/saphelp_nw04s/helpdata/EN/48/444941db42f423e10000000a155106/content.htm]
Regards,
Manne. -
Copy Custom toolbar from one instance to another in Project server 2007
Hi,
I am currently using project server 2007. We have a number of instances in our Project server enivoronment. Is it possible to copy customized toolbar from one instance to another? If yes, how?
Thanks in advanceHi Khaldun,
As per my reply in your previous post, here is a link explaining how to use the organizer:
Http://blogs.msdn.com/b/project/archive/2010/10/22/tips-and-tricks-copy-custom-views-filters-tables-and-other-elements-to-other-projects.aspx?Redirected=true
Basically, just copy the toolbar from the global source instance into a blank project file. Then do the same operation from the blank file containing your toolbar into the destination global model, still using the organizer.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS -
How to Copy the PLD from one database to another
Dear Members,
i have designed the PLD for Purchase Order, i want to copy the particular PLD into another Database.
i tried to copy the PLD from one database to another through copy express.. i copied the PLD sucessfully. But the problem is,it copies all PLD's from one database to another. i want only the Purchaseorder PLD has to be copied in to another database.any body can help me in this regard.
With Regards,
G.shankar GaneshHi,
select * into A1 from RDOC where Author !='System'
select * into A2 from RITM where Doccode in (select Doccode from A1 )
select * from A1
select * from A2
sp_generate_inserts 'A1'
sp_generate_inserts 'A2'
you will get Insert scripts of A1 and A2 tables .After that You 'll Replace A1 to RDOC and A2 to RITM.
So that you can RUN this SQL srcipts any where (In any Database)
but First u have to run sp_generate_inserts Storeprocedure(from websites) .
drop table A1,A2 -
Error while copying a page from one application to another application
Hi All
I am using Oracle Apex 4.0
I getting the error ORA-06502 Pl/Sql Numeric error character string buffer too small when i copying a page from one application to another application.
Thanks & Regards
Srikkanth.MI'm having the same issue. How did you solve this?
-
Can I copy my iTunes from one Mac to another to a distant location?
I have 2 homes one in NYC and the other in upstate NY. I have multiple Macs at both locations all using Snow Leopard and the latest version of iTunes(9). I only have 1 iTunes library I maintain at the upstate location and have to bring my iPod to the NYC location to play my music. Can I not copy my iTunes library to the NYC location using Home Sharing or using some other method? I often forget to bring my iPod and am left without my music.
Prince Moe wrote:
Hi
Since I had a problem with my Mac's drive that suddenly failed (I am able to read ONLY), I replaced the internal HD with my emergency HD that I had backedup a few months before. I would like to know if there's a way to copy my settings from one mac to another? Is there a specific folder for all apps or do I have to find out each and every single file for each app?
I need the settings for
System (view, font, color,)
Finder (view, etc)
iTunes (that include all library, playlists, etc),
Firefox (Bookmarks, settings & plug-ins),
Safari (Bookmarks, settings & plug-ins),
Address Book (contacts)
Thuderbird (emails accounts, contacts, passwords, etc)
Stickies (stickies on the dock - i have info on there unsaved)
Filezilla (FTP infos)
Would appreciate.
Thnx.
All that info is found in your user/library folder, I just did a 60 machine rollout and copied all those settings from user/library, just be forewarned that if you upgrade software those setting will not take on the machine, for example Adobe CS 3,4 will not usable by CS5. let us know if you need more help. Also make sure you copy most of your preferences in the user/library/prefences folder.
Note: If you are using an identical backup with all apps and user settings, you can just copy all folders from user to your new home folder. Remember that only if the image or backup is identical to your production OS. -
How To Copy Selected Music From One Library to Another?
What is the best way to copy selected music from one library to another?
I have a big and growing iTunes library -- 33,000 songs.
A year ago I copied my library to my daughter's new iMac. Now, a year later, I'm off to visit her and wonder how best to update her library. In the past year I have added a number of items to my library and I'm sure she has done the same -- some might be the same but many will be different.
How do I update her library with the new things I've added in the past year but not wipe out things she had added or duplicate when we each have a song?
I can load any / all of my stuff on an external HD and take that to plug in to her computer. Then what? I want to avoid duplicates and make sure I get stuff like album artwork.
I'm running iTune 10.4 on an iMac with OS X 10.6.8 -- my daughter will have the same iTunes and OS X once we update her software.
Any advice would be great.
ThanksIf you're sharing the same Apple ID and all your songs are from the iTunes Store, it's easy:
In iTunes on your computer, go to File->Preferences->Store and check the box next to MUSIC under AUTOMATIC DOWNLOADS.
You should also read this article, the section titled TO DOWNLOAD PREVIOUSLY PURCHASED APPS, BOOKS, MUSIC, OR TV SHOWS TO YOUR COMPUTER:
http://support.apple.com/kb/ht2519
You could also use an rsync utility such as backuplist+ to perform a 2-way sync of the files in your two libraries while your computers are connected via FireWire with one of them in FireWire Target Disk Mode, or from your external hard drive with your daughter's computer and then to yours again. After that, you'll need to use iTunes on each computer to update its library with the new files:
http://rdutoit.home.comcast.net/~rdutoit/pub/robsoft/pages/backup.html
This last would also be the preferred method if you have authorized each other's computers for media purchased with each other's Apple IDs (i.e. you are not sharing the same Apple ID), or if you have music from sources other than the iTunes Store. Most likely, though, music from sources other than the iTunes Store would not be legal to copy in this way for this purpose, although there is probably no technical impediment. -
Can i copy my settings from one mac to another?
Hi
Since I had a problem with my Mac's drive that suddenly failed (I am able to read ONLY), I replaced the internal HD with my emergency HD that I had backedup a few months before. I would like to know if there's a way to copy my settings from one mac to another? Is there a specific folder for all apps or do I have to find out each and every single file for each app?
I need the settings for
System (view, font, color,)
Finder (view, etc)
iTunes (that include all library, playlists, etc),
Firefox (Bookmarks, settings & plug-ins),
Safari (Bookmarks, settings & plug-ins),
Address Book (contacts)
Thuderbird (emails accounts, contacts, passwords, etc)
Stickies (stickies on the dock - i have info on there unsaved)
Filezilla (FTP infos)
Would appreciate.
Thnx.Prince Moe wrote:
Hi
Since I had a problem with my Mac's drive that suddenly failed (I am able to read ONLY), I replaced the internal HD with my emergency HD that I had backedup a few months before. I would like to know if there's a way to copy my settings from one mac to another? Is there a specific folder for all apps or do I have to find out each and every single file for each app?
I need the settings for
System (view, font, color,)
Finder (view, etc)
iTunes (that include all library, playlists, etc),
Firefox (Bookmarks, settings & plug-ins),
Safari (Bookmarks, settings & plug-ins),
Address Book (contacts)
Thuderbird (emails accounts, contacts, passwords, etc)
Stickies (stickies on the dock - i have info on there unsaved)
Filezilla (FTP infos)
Would appreciate.
Thnx.
All that info is found in your user/library folder, I just did a 60 machine rollout and copied all those settings from user/library, just be forewarned that if you upgrade software those setting will not take on the machine, for example Adobe CS 3,4 will not usable by CS5. let us know if you need more help. Also make sure you copy most of your preferences in the user/library/prefences folder.
Note: If you are using an identical backup with all apps and user settings, you can just copy all folders from user to your new home folder. Remember that only if the image or backup is identical to your production OS. -
I have no problems copying iMovie Events from one Mac to another, however, how can I copy iMovie Projects from one Mac to another? Any help will be appreciated. Thank you.
This should give you some good insight, I'd probably store them on an External HD on the old machine and then just drag and drop to the new machine.
https://discussions.apple.com/docs/DOC-4141 -
How do I copy the style from one control to another?
I need to programmatically copy the style from one graph to another. I'm currently using the importstyle and export style functions but I'd like to avoid that since: 1) I'm creating >100 of the same graphs in a scrolling window and execution time is a concern, and 2) it makes it harder to redistribute the application, and 3) you shouldn't have to import/export from disk just to copy a graph style.
I noticed the copy constructor was disabled so you can't just create a new one from the original. I suppose I could iterate through all the styles and transfer them from the master graph to all the copies but is there an easier way to do that? If not, is there some sample code for that?
I'm using MStudio 7.0 for C
++.
Thanks,
-BobOne way that you could do this would be to create a helper method that configures your graph rather than configuring it at design-time, then use that helper method to apply the settings to the new graphs that you create. However, this would only work if you wanted all graphs to be configured exactly the same way - this would not work if the settings of your master graph are changing at run-time and you want the new graphs to be configured with the current settings of the master graph.
Another approach is to query each control for IPersistPropertyBag, create an IPropertyBag, pass the IPropertyBag to the master graph's IPersistPropertyBag:ave, then pass the IPropertyBag to the new graph's IPersistPropertyBag::Load implementation. I'm not aware of any implementations of IPropertyBag that are readily available for use in applications, so the tricky part is creating the IPropertyBag. Below is a very simple implementation of IPropertyBag that should be enough to get the job done for this example. First, add this to your stdafx.h:
#include <atlbase.h>
CComModule _Module;
#include <atlcom.h>
#include <atlcoll.h>
Here's the simple IPropertyBag implementation:
class ATL_NO_VTABLE CSimplePropertyBag :
public CComObjectRootEx<CComSingleThreadModel>,
public IPropertyBag
private:
CAtlMap<CComBSTR, CComVariant> m_propertyMap;
public:
BEGIN_COM_MAP(CSimplePropertyBag)
COM_INTERFACE_ENTRY(IPropertyBag)
END_COM_MAP()
STDMETHODIMP Read(LPCOLESTR pszPropName, VARIANT* pVar, IErrorLog* pErrorLog)
HRESULT hr = E_FAIL;
if ((pszPropName == NULL) || (pVar == NULL))
hr = E_POINTER;
else
if (SUCCEEDED(::VariantClear(pVar)))
CComBSTR key = pszPropName;
CComVariant value;
if (!m_propertyMap.Lookup(key, value))
hr = E_INVALIDARG;
else
if (SUCCEEDED(::VariantCopy(pVar, &value)))
hr = S_OK;
return hr;
STDMETHODIMP Write(LPCOLESTR pszPropName, VARIANT* pVar)
HRESULT hr = E_FAIL;
if ((pszPropName == NULL) || (pVar == NULL))
hr = E_POINTER;
else
m_propertyMap.SetAt(pszPropName, *pVar);
hr = S_OK;
return hr;
Once you have a way to create an implementation of IPropertyBag, you can use IPropertyBag and IPersistPropertyBag to copy the settings from one control to another like this:
void CopyGraphStyle(CNiGraph& source, CNiGraph& target)
LPUNKNOWN pSourceUnknown = source.GetControlUnknown();
LPUNKNOWN pTargetUnknown = target.GetControlUnknown();
if ((pSourceUnknown != NULL) && (pTargetUnknown != NULL))
CComQIPtr<IPersistPropertyBag> pSourcePersist(pSourceUnknown);
CComQIPtr<IPersistPropertyBag> pTargetPersist(pTargetUnknown);
if ((pSourcePersist != NULL) && (pTargetPersist != NULL))
CComObject<CSimplePropertyBag>* pPropertyBag = 0;
CComObject<CSimplePropertyBag>::CreateInstance(&pPropertyBag);
if (pPropertyBag != NULL)
CComQIPtr<IPropertyBag> spPropertyBag(pPropertyBag);
if (spPropertyBag != NULL)
if (SUCCEEDED(pSourcePersist->Save(spPropertyBag, FALSE, TRUE)))
pTargetPersist->Load(spPropertyBag, NULL);
(Note that "CreateInstan ce" above should be CreateInstance - a space gets added for some unknown reason after I click Submit.)
Then you can use this CopyGraphStyle method to copy the settings of the master graph to the new graph. Hope this helps.
- Elton -
Newbie Qs: Copying an outline from one application to another
My apologies for accidentally posting this question twice!
Hello,
I want to copy an outline from one database to another, both on the same server. I know I can save the outline as a .otl file. But how do I actually copy this saved .otl file over to the other database? Sorry if this is a very basic question, complete newbie to Essbase. Thanks.
ps: Is there another way of copying the outline over from one database to another?
Edited by: Sam on Jun 27, 2010 1:48 PMOpen the outline in Edit mode, and from File > Save As, Select "Essbase Server" tab. Navigate to database where you would like to save. If you have data inside the cube, it will give you options on what to do with the data.
Hope this helps
Thanks,
Naveen Mikkilineni
Maybe you are looking for
-
Delivery Date should be blank in ME51N
Hi, We want Delivery Date as Blank & Mandatory in ME51N - PR Creation. I have already tried with T.code OMI8, where we removed Processing time required field value as 0 under External Procurement but from this, Delivery Date is showing same date as P
-
Dynamic call to Library procedure.
I am having a pll which has three procedures. I want to call a procedure in that library whose name is decided at form runtime. Any idea on how this can be done. Regards Kaustubh
-
Why has my apple tv forgotten my purchases after the upgrade?
I have had to re-enter all account and wireless details too, but the thing that really doesn't work is that it has no history of my purchases. Any ideas anyone?
-
Is it possible to get a count of all the class files in a Flash Builder project?
Is it possible to get a count of all the class files in a Flash Builder project? Thanks!
-
Disk Utility reports it cannot repair this file...ARDAgent
Started verify/repair permissions on disk0s2 Silver Book Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired Anyone know what that means? Is there a proble