Copying the Bw system to Another BW system

Hi
Iam copying the data of One system to another BW system So can you advice How do I need to tack of all the Infocube data is transfeered or not?
Is ther any Particular transaction?
Please suggest....

Hi,
Please check How to Guide and ppt below.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bff13df2-0c01-0010-6ba7-bc50346a6fd8
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c38cba90-0201-0010-c59a-f6160006e850
Regards.

Similar Messages

Copy the boot disk to another disk

Hi,
Can anyone suggest me the best solution among the available to copy the boot disk to another disk periodically in SPARC Solaris 10 OS Environment?
Thansk in-advance
Mike

I don't believe so - if you want a 'quick and dirty' method you could use dd to copy slice 2 (by default that represents thw whole disk) to another location but if your disk size is quite large that could take some time. Be warned that would also take the VTOC with it so the target disk should be the same type (at least the same size, or more) as the source or you may end up with issues if you send it to slice 2 of the target.

How to copy the all data to another new table

Hi,
1) "How can I copy the data from one Data Dictionary Table to another new Table, in Dictionary"?
for eg. (<i>In Dictionary, I have one table named 'sflight' and now I want to copy the all data from 'sflight' to another new table named 'zabc'</i>)
How can I do this?
2) What is Logical Unit of Work or LUW.
Thanks

HI,
go to <b>se11</b>, give sflight (Your standard table name) in tables text,
No go to dictionary objects --> copy --> give new <b>Ztable</b> in <b>to table</b> text.
Like this you can copy the standard sap table to a new ztable..
A Logical Unit of Work (LUW or database transaction) is an inseparable sequence of database operations which must be executed either in its entirety or not at all. For the database system, it thus constitutes a unit.
LUWs help to guarantee database integrity. When an LUW has been successfully concluded, the database is once again in a correct state. If, however, an error occurs within an LUW, all database changes made since the beginning of the LUW are canceled and the database is then in the same state as before the LUW started.
An LUW begins
o each time you start a transaction
o when the database changes of the previous LUW have been confirmed (database commit) or
o when the database changes of the previous LUW have been cancelled (database rollback)
An LUW ends
o when the database changes have been confirmed (database commit) or
o when the database changes have been canceled (database rollback)
SAP memory and ABAP memoryUsing SAP memory. User-specific memory retained for the duration of the session. Can only be used for simple field values.
Using ABAP memory. Can be used to transfer data between internal modi. Can be used to transfer any ABAP/4 variables ( Fields, strings, internal tables, complex objects)
SAP memoryYou use the SPA/GPA parameters to pass data. These paramters are saved globally in memory. The paramters are indetified by a three-character code.
In dialog programs you can SET and GET these parameters in the attribute window of the screen field, by marking the SET and GET fields and put the name of the parameter in the ParameterId field.
In a program ( Dialog or Report ) you can use the GET PARAMETER and SET PARAMETER statements:
set parameter id 'RV1' field <fieldname>
get parameter id 'RV1' field <fieldname>
rewards if useful,
regards,
nazeer

Can I copy the Recovery files to another D partition?

Hi,
My disk came with C and D partitions, but I want to arrange my disk partitions differently from factory.
I want to shrink system (C) partition a bit, create a 15Gb partition, copy the recovery files to there (to keep the recovery files isolated), and rename that partition as the new D drive.
The only thing that matters for the recovery tool to work is to place the files on a D partition?
Has anyone done similar a thing?
Will it work?

Hey,
To be honest I dont think that HDD recovery will work if you copy the files on another partition.
Why you want to do this?
I use the factory default form C: and D: partition. On C: I have installed all my programs and on drive D: I have saved my private files like Picture, Music, Videos, Documents, etc.
I dont see a reason to create a separate partition for HDD recovery files because they are saved in a additional folder.

To Copy the file content to another file and to delete the orginal file.

Hi ,
Can you pls let me know how i need to copy the contents of one file to other,
For e.g   P_FL Consits of following records ( Assume that file need to created on application server)
This is standard header ( header record)
name school class adreess ( item records)
xyz     abc     1        kkkkk
jjjj        cba     2       jkjkjkj
uiui      cab     3       oioioioi
i need to copy the above mentioned file contents( P-FL) into another file say P_NEWFL.
so how i need to create this new file and how to copy the content of old file to new file.
After copying the contents of old file to new file i need to delete old file.

Sample code to implement this
PARAMETER: p_file TYPE file DEFAULT 'd:\interface\In\barcoinbound2sap.txt',
           p2_file TYPE file DEFAULT 'd:\interface\In\backup_barcoinbound2sap.txt'.
START-OF-SELECTION.
OPEN DATASET p_file IN TEXT MODE ENCODING DEFAULT FOR INPUT.
OPEN DATASET p2_file IN TEXT MODE ENCODING DEFAULT FOR OUTPUT.
DO.
    READ DATASET p_file INTO line.
    IF sy-subrc NE 0.
      EXIT.
    ENDIF.
    TRANSFER line TO p2_file.
   IF sy-subrc NE 0.
     EXIT.
   ENDIF.
    SPLIT line AT ',' INTO lit_barco-prodnorder lit_barco-quant lit_barco-machtime lit_barco-duedate.
    APPEND lit_barco.
    CLEAR lit_barco.
ENDDO.
CLOSE DATASET p_file.
CLOSE DATASET p2_file.
dalete dataset p_file

HT4854 Can I copy the downloaded file to another computer to avoid the 4gigs re-download?

I'm downloading ML and it takes A LOT to download the 4gb install files, can I just copy the downloaded files into my other computer so I can avoid re-downloading it?

When Mountain Lion is fully downloaded it will automatically start. DO NOT click the Install button. Instead Quit the installer. Make a copy and put it in your Downloads folder for safe keeping. Now, see the following:
Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
Double-click on the InstallESD.dmg file to mount it on your Desktop.
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the mounted disc icon from the Desktop into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
Note: The term Mountain/Lion used above means Lion or Mountain Lion.

Is it possible to copy the SoD rules in the same system to diff. Rule SetId

Hi all,
We have created SoD rules as per our business requirement in RAR 5.3 Component connecting to the QA system. We want to copy the same rules into another different RULE SET for the same QA system. Is this possible?
Ex: ABRULE SET - Tailored as per Business Requirement and generated rules linking to QA system [Manually configured the SoD rules].We will use this Rule set for our Production System as it was frozen as per the Business Requirement (This we will do by establishing another JCO to production system)
We wanted to copy the entire SoD rules of ABRULESET to another rule set say YZRULESET. This YZRULESET we will use for making any configuration changes in future before making changes to ABRULESET which will be connected to Production System.
Is it possible to copy the SoD RULES from one Rule Set ID to another Rule Set ID within the same system? If yes, please provide us the procedure on how to copy the rules of one Rule set Id to another Rule set ID.
We explored the options of Export & Import Rules but no where it asked for new Rule Set ID for copying.
Thanks and Best Regards,
Srihari.K

Here is a method I've seen a few customers use, which seems like a good idea:
- load the standard rule set
- create a new empty rule set
- create your risks in the new rule set ( initially this could be a re-import of the risks, risk_desc and risk_ruleset files with a few changes done in excel to change the IDs)
This means you have an exact copy of the SAP standard risks in your own rule set, using the SAP functions.
Even if you have to define your own risks, there's an enormous value in the functions. The identification of TCodes and objects that do similar business transactions is probably the most difficult thing to reproduce on your own.
Now, whenever you have to change a risk (risk level, description, owner) you do that in your own name space
If you have to change a function (modify objects, add custom TCodes), you COPY the function to your own name space and change the risk in your name space to use the changed function.
If you want to be smart, you do all your own stuff in copies of the text files that come with the support packs (i.e. not in rule architect). That may not be an option if your compliance requirements want you to use the change history or automatic workflows that RAR provides, but if you don't need that, here's the advantage of this:
When a new set of rules arrives every few months, you delete your rules with a deletion script you can get from SAP support, upload the standard rule text files, upload your own text files, and you're set with your own rule set that makes use of SAP's latest updated functions.
This is (currently) basically the only way to automatically apply SAP changes without doing it manually, thus leveraging changes to functions by SAP.
All your changes will be in your own text files, which you can document and version control according to your requirements.
Not exactly the way according to the manual, but an interesting concept worth considering.

Refresh of BW System without deleting the source system

Hello experts
I want to know, is it possible to refresh BW system without deleting the source system.
That means I just do the renaming via BDLS and reconnect.
If I do so, do I have a post refresh activities.
According to OSS note 886102 and 184447, there are 3 scenarios:
Scenario A: You want to copy the entire system infrastructure connected by the BW source system connections (that means the entire system group).
Scenario B: You want to copy a single BW system of the group, the sourcesystem is not copied.
Scenario C: You want to replace a single sourcesystem of a BW-system with another system using a database or client copy (Example: Refresh of the OLTP consolidation system by a copy of the OLTP production system). The BW system is not copied
Assuming I use Scenario A, can I refresh BW system without deleting the source system.

Hi:
The primary source of information is the how to paper on this topic:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bff13df2-0c01-0010-6ba7-bc50346a6fd8
YOu are correct, you can refreh the BI system without deleting the source system.
Thanks for any points you assign (after all, I wrote the paper!).
Best Regards -
Ron Silberstein
SAP

How to Copy the PLD from one database to another

Dear Members,
i have designed the PLD for Purchase Order, i want to copy the particular PLD into another Database.
i tried to copy the PLD from one database to another through copy express.. i copied the PLD sucessfully. But the problem is,it copies all PLD's from one database to another. i want only the Purchaseorder PLD has to be copied in to another database.any body can help me in this regard.
With Regards,
G.shankar Ganesh

Hi,
select * into A1 from RDOC where Author !='System'
select * into A2 from RITM where Doccode in (select Doccode from A1 )
select * from A1
select * from A2
sp_generate_inserts 'A1'
sp_generate_inserts 'A2'
you will get Insert scripts of A1 and A2 tables .After that You 'll Replace A1 to RDOC and A2 to RITM.
So that you can RUN this SQL srcipts any where (In any Database)
but First u have to run sp_generate_inserts Storeprocedure(from websites) .
drop table A1,A2

How to change or rename the logical system name T90CLNT090 IN BI 7

HI Expert's,
i am really digging for the solution of changing or renaming the logical system name technical name T90CLNT090.
in our company we are using ecc5.0 with bi 3.5 and ecc6 with bi 7. In BW 3.5 having a connection with R/3 and the technical name of the myself bw source system(logical system) is T90CLNT090.
In bi 7 also the logical system name is same as T90CLNT090. Because of the same system name(Logical name) it is not active in BI7 and also it's giving error when i am activating the DSO Object as Transfer structure prefix for source system T90CLNT090 is not defined.
because of this i am not able to create the source system between r/3 also.
so how to change this source system name for T90CLNT090.
regards
harikrishna N

Hi,
Pls follow this OSS note : 325525.
Note 325525 - Copying and renaming systems in a BW environment
Summary
Symptom WARNING: THIS NOTE HAS BEEN REPLACED. FOR MORE CURRENT AND MORE COMPREHENSIVE INFORMATION SEE NEW NOTE 886102.
You want to copy and or rename one or more systems (database or client copy). One or more of the systems is a BW system or is connected to a BW system.
Caution: This note only deals with problems that occur in the BW source system connections. Other problems that occur in the BW environment (indexes) are NOT dealt with. See URL http://www.service.sap.com/bw --> Services & Implementation --> System copy & Migration.
Other terms BW, source system, OLTP, database copy, client copy, system infrastructure, transport system, connections, RFC connection, trfc, transfer structure, IDoc, ALE customizing, logical system name, system changeability, renaming systems, system copy
Solution Several scenarios are possible in this environment. Find the scenario relevant to your situation below and execute the steps listed or read the note(s) specified:
Scenario 1) You do not want to copy a system but only want to rename one (changing a logical system name).
           Solution scenario 1): Execute Transaction BDLS both in the client to be renamed and in the connected BWs or BW source systems. To do this, see Notes 121163 and 369758.
           Check the RFC destinations in all connected BWs/BW source systems as described in Note 524554.
           Reactivate all partner agreements that carry the new logical system name after renaming.
Scenario 2) You want to copy the entire system infrastructure connected by the BW source system connections (that means the entire system group) by a database copy. SAP recommends this procedure for copying systems.
           Solution scenario 2):
If you want to rename one or more of the copied systems, then execute Transaction BDLS both in the client you wish to rename and in all the connected BW and BW source systems. See Note 121163.
                    Make sure that an RFC destination exists with the new logical name in every connected BW or BW source system.
                    Reactivate all partner agreements that carry the new logical system name after renaming.
Change the hosts in the appropriate RFC destinations so that they refer to the correct computer. For this, see Note 524554.
Scenario 3) You want to copy a single BW system of the group by database copy.
Scenario 3)a) You only want to exchange the hardware of your system but do not want to rename the system.
                     Solution scenario 3)a): You do not need to execute follow-up work regarding the system connections, except for adjusting the IP address in the RFC destinations of the connected system.
Scenario 3)b) You want to keep the original system of the copy so that you have two systems after copying.
                     Solution scenario 3)b): See Note 184754.
Scenario 4) You want to copy a single source system of the group by database copy.
Scenario 4)a) You only want to exchange the hardware of your system but do not want to rename the system.
                     Solution scenario 4)a): You do not need to execute follow-up work regarding the system connections, except for adjusting the IP address in the RFC destinations of the connected system.
Scenario 4)b) You want to keep the original system of the copy so that you have two systems after copying.
           Solution scenario 4)b): See Note 184322.
Scenario 5) You want to import a client copy in a source system.
           Solution scenario 5): See Note 325470.
Thanks & Regards,
Suchitra.V

Copying the 'Configurator' Account

Is it possible to 'copy' the configurator account to another new account within IDM so it has exactly the same access rights etc. similar to the way you can right click and copy an account in Active Directory?

Accounts: New User
Set "Configurator" as accountId
Push Load button
Set a new, unique accountId, e.g. Configurator2
Save
Use the Debug pages and compare the XML objects to see if you like the result.
Edited by: Ugato on 02.03.2009 21:07

Can I copy the "Stage Area" and use it on other machine; R12; OEL 6;

Hello All,
I am trying to install R12 (with Vision demo database) on my Linux machine.
I have copied the stage area from another machine, and I want to use it on this machine.
I am trying to run the rapidwiz from the copied stage directory.
It initiates, but is now ending up with a RW-5004 error.
I have tried to install R12 several times now, but no success so far.
I dont know the specifications for the last machine, but the staging has been done on a Linux platform.
The present machine is
RAM : 8 GB
HDD : 400 GB
OS : OEL 6 (64 bit)
all the necessary packages are installed.
Please Help !
Thanking you all.
Edited by: Udit apps dba on Apr 25, 2012 3:48 PM

Hello Hussein Sir,
I have read all your previous posts indication this error to be generic in nature.
Well, I have read the error logs of different nodes, but without having much success in it.
At last, after too much of trying I deleted my VM machine and now I am installing the machine again, with fingers crossed.
My biggest question is "Can I copy the "Stage Area" of another machine of same configuration and use it on other machine" ?
At last, I would request you sir to please forward me your personal email address (the one you use often).
I shall be highly obliged.
Regards,
Udit Kulshrestha

If I secure my browser using CISecurity's baseline for Firefox, can I copy all the ".js" files from the hardened system to another?

I own multiple systems. I have hardened one browser following the guideline provided by CISecurity. Instead of repeating all the configurations performed on that one system, can I just copy all the ".js" files from the secured system to my other systems?
The ".js" files can be modified using a text editor. Is there a way to lock down these files to prevent modification?

Dear Joel
i know two ways to prevent browser from caching your files
First : The Hard way
just add ? +Math.random() in the end of your file
Like this :
in HTML :
<script type="text/javascript">
(function(){
     var e = document.getElementsByTagName("script")[0];
     var d = document.createElement("script");
     d.src = "index_edgePreload.js?"+Math.random()+"";
     d.type = "application/javascript";
     d.async = true;
     d.defer = true;
     e.parentNode.insertBefore(d,e);
</script>
instead of this Line in HTML that created by EA :
<script type="application/javascript" src="index_edgePreload.js></script>
Disadvantage : you should do this for all of files you want to prevent from caching
===================================================
Second : The easyest way
You Should have Access to .htaccess file in your Server
Open your .htaccess file and paste these codes in it :
ExpiresActive On
ExpiresByType application/json "access plus 1 seconds"
ExpiresByType text/json "access plus 1 seconds"
ExpiresByType text/plain "access plus 1 seconds"
ExpiresDefault "access plus 1 month"
you can type what ever type of file you want to prevent from caching in browser
Advantage : after do this in your .htaccess file all files with the type you want will not Cache in your browser
Easy is'nt it ?
Zaxist

An error has occurred in the system "ECC" while copying the document

Hello Experts,
When I'm creating service orders in CRM UI and saving them I'm receiving this error:
An error has occurred in the system "ECC" while copying the document
Details:
An error has occurred in the system "ECC" while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occurred while transferring the document into another system. Refer to the enclosed log to view the error messages.
Transmission log
Error occurred during determination of profitability segment (Notification E IAOM 025)
Profit center for CRM integration not found (Notification E KECRMPCA 001)
Error occurred during determination of profitability segment (Notification E IAOM 025)
Account assignment error in internal order K1153000004111 for position 2000000990/0000000020 (Notification E C( 321)
Regarding to the account assignement, we developed a field to input Accounts IDS for WBS.
This field has a customization table related which allows to visualize in a dropdown list the allowed WBS ID per user according to the entries in the table.
Also, In the Service Order there is one status that triggers an action that creates a Sales Order in CRM that is replicated in ECC, but since I have this error Sales order is not being replicated in ECC.
Any ideas?
Kindly Regards,

HI,
Please check these threads:
CRM-COPA- An error occurred in system EEPCLNTXXX during account assignment
http://www.riderspider.com/2010/11/error-error-occured-in-system-dv1cltecc.html#more
Denis.

Error in system ERDCLNT000 while copying the document

Error in system ERDCLNT000 while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors occurred while transferring the document into another system. To view the error messages, see the enclosed log.
Transmission log
No category of hierarchy 'Purchasing' has been maintained for product SRV_SLS (Notification E CRM_SRV_LOGISTIC_EXT 003)

Hi Hasan,
Thanks for your reply.
I could find table TACE_ACRTYPE which has entries as in attached screenshot.
How do I proceed now.
Warm Regards,
Nidhi

Copying the Bw system to Another BW system

Similar Messages

Maybe you are looking for