Copying the function group CHVW

Hello friends,
I am trying to copy the fucntion group ( CHVW) to Z-Function group but I am unable to copy the SAP is
showing the message LCHVWTOP is inactive, if I see LCHVWTOP is active in Standard Function group.
Thanks in Advance.
Ravi Yasoda

Hi Adnan;
Are you sure you haven't dont release second or more requests for FG?
If you have more requests, your FG may hasn't be last FM list.
Yo can check  below include in SAPLZ<FG> function pool.
  INCLUDE LZ<FG>UXX.                       " Function Modules
Are you seeing last FM list?
Best regards.

Similar Messages

  • How to copy the function group

    hi there,
    i want to copy the function group 2012. plz let me know the possibility.

    use FM <b>RS_FUNCTION_POOL_COPY</b>  to copy
    Look at this thread
    how to copy the function group

  • Copy the function module

    Hi,
    can you suggest me how can i copy the function group.
    for example:Zfun_01  having 10 objects and i need all the objects to Zfun_02 function group.
    I tried from SE80 but I didnt get copied.
    Thanks,
    Sriiii.

    Hi
    Check the below thread the same issue is discussed
    Re: Function-Group
    Regards
    Pavan

  • Problem in copying the function module.

    Hi All,
    I have to Copy the standard function modules "FI_ITEMS_DISPLAY" and "ITEM_DERIVE_FIELDS".
    The Function group for both of above FM is "FI_ITEMS".
    What i did is I went to SE80 ,I copied down the Function Group 'FI_ITEMS' to 'ZFI_ITEMS'.
    later on i copied the standard function modules 'FI_ITEMS_DISPLAY' and 'ITEM_DERIVE_FIELDS'
    to the 'ZFI_ITEMS_DISPLAY' and 'ZITEM_DERIVE_FIELDS' resp.in the same function group 'ZFI_ITEMS'.
    Then i made some changes to these copied modules (I did change the structure of it_items from RFPOSXEXT to ZRFPOSXEXT in ZFI_ITEM_ITEM_DISPLAY,and same change in ZITEM_DERIVE_FIELDS but for the parameter s_item).
    And finally i activated these FM..and it got activated also.
    But later on when i used these FM in my report...error occured saying that -
      "The name of the function module to be called is "ZITEM_DERIVE_FIELDS".
    but "ZITEM_DERIVE_FIELDS" cannot be found in its function group. "
        hence i thought of activating the function group ZFI_ITEMS,which was inactive before to this...but when i tried activatin this FM it was giving hell lot of errors showing conflict occured at diffrent places,I think just because of the change (structure of IT_ITEM chnged from RFPOSEXT to customised ZZRFPOSXEXT).
    I am helpless in removing all this errors ...
    Can anybody suggest where did i go wrong?
    And what is the right way to copy the function module.?
    If possible reply me ASAP.
    Thanx in advance.

    Hello Sanjay,
    First, delete your new function group and
    Do like this:
    1. copy FI_ITEMS_DISPLAY to zFI_ITEMS_DISPLAY from Se37. here you find a button on the application toolbar to do it. It also asks about the Function group. GIve the FG as
    ZFI_ITEMS.
    Activate all the related objects
    2. same for the other FM. Use the same FG. and activate the related objects.
    Regards,
    Naimesh

  • Rename the function group

    hi...
    How to rename the function group name????
    I tried with... copy option.... but its asking for function modules of that function group name change...
    I dont want to change the names of function modules..
    Thanks,
    Naveen.I

    Naveen,
    Goto SE38 --> Enter the program name as SAPL(Function Group Name) e.g. if FG name is TEST then enter Program as SAPLTEST. In the application toolbar, there will be an option Rename. Click on that na dprovide the new name. Press Enter and activate.
    Every Function Group has a main program associated with it which contains the TOP Include and the UXX include. UXX include contains the includes. Each include here corresponds to a function module.,
    To see the main program, what u can do is goto SE37 --> Goto --> Function Group --> Display Group.
    Put the group name here and then press the button Main Program on the popup that comes.
    Hence, I am talking of this main program which if u will rename, will automatically rename the Function group.
    Hope it helps.
    Amit.

  • Copying of function group

    Hi all,
    Please help me in this issue.
    when i copy function group , i am ablw to copy the function modules but i am not able to copy the Inlcudes in the function group
    can anyone please explain how can i copy the includes also
    Thnaks in Advance
    K reddy

    Hi k reddy,
    it may depend on the release you use. I remember it was not that easy in the past as already described.
    Note that copying functions as well as includes you always need new names for copied objects.
    Now, if it is not too much work: Go to main program, see the INLUDE statements for the 'old' function groups includes. Change to new names and copy the includes manually to new name.
    Next time it may work.
    Or delete new function gropu and start all over again.
    Note: If any inluce includes other include statements: Those inludes you must copy and rename manually (if changes are required).
    Regards,
    Clemens

  • System error: Error when copying parameter function group CR01

    Dear friends
    I am getting the above error while doing the Backflushing in REM.
    It occurs when backflushed quantity is issued ,and while confirming the
    ACTUAL ACTIVITES above error occurs..........
    We have upgrade the system from SAP 4.7 to ECC6.0.
    It is giving some error in CRM system but we don't have CRM system.......
    Message displayed is as below..................
    System error: Error when copying parameter function group CR01
         Message no. CR085
    Diagnosis
         Internal error.
    Procedure
         Repeat the transaction.
         If the error occurs and you have a CRM System connected to your ERP
         System, the document may have been archived in the CRM System.
         If the error occurs again, inform your system administrator. If the
         error cannot be corrected, call the SAP Hotline directly. Describe which
         steps preceeded the error.
    Thanks& Regards
    Sandeep
    Message was edited by:
            Sandeep Bhowmick

    Hi Sandeep
    Standard R/3 does not allow backflush without any operation. You need to have an operation to do a backflush.Error message CR 085 is issued because there is no operation in the routing of the material backflushed. System should issue an error when no operations are found in routing. Although, error message CR 085 is not correct, more appropriate message RM 824 for this a program correction is requried check note (691161).
    Regards
    Prasad
    Reward if useful

  • Copy of Function Group SETB giving error

    Dear All,
    I tried to copy the standard function Group SETB to ZSETB(Which is having SE16 transaction attached) but during activation the include is giving error as "The Field TABNAME is unknown". I have just copied the entire functional group along with function modules. No clue how I can avoid the error. I deleted the include LSETBF10 and re-copied, but error is persisting. Do you have any clue???
    Thanks and regards,
    AD

    Hi!
    Thanks for all your valuable reply. I could avoid the error but could not avoid another error: "The parameter INTTAB of the Global interface has already been defined outside the function". While double clicking on the error, I have reached to a hidden include (Not possible to browse through Navigtion) LZSETB$07. The include contains the following code:
      THIS FILE IS GENERATED BY THE FUNCTION LIBRARY.               *
      NEVER CHANGE IT MANUALLY, PLEASE!                             *
    FUNCTION $$UNIT$$ ZRS_TABLE_VIEW
             IMPORTING
                   VALUE(TABNAME) LIKE !DATABROWSE-TABLENAME
               DEFAULT 'TFDIR'
             TABLES
                   !FIELDTAB STRUCTURE !X031L OPTIONAL
                   !INTTAB
             EXCEPTIONS
                   !CANCELD
                   !GENERATION_ERROR
             $$GLOBAL.
    I assume that is a system generated include. The Global option in FM has automatically been copied during copy of the function group and the function module.
    Thanks and regards,
    AD

  • Regarding Transport Of the Function group

    Hello Guru,
    I am Facing problem while transporting the Transport Request Number From SAP 4.7 to SAP ECC5.0. The Transport is Working Fine. I am able to transport the Package, But all the object in the package except Function Group is Not getting transport.
    So Please Let me Know any other method is there to transport the Function Group.
    Please Help me it is urgent.
    Thanks in advance.
    Best Regards,
    zubera

    Check your transport, it should contain an entry for
    R3TR - DEVC - 'your package name'
    This should tranport the whole package including all the objects,
    Regards,
    Michael

  • Regarding uploading the function group

    Hi All,
       I have a requirement like this....
       I have a selection screen which consists of function group name...and two options upload and download...
       If i click on download option and supply the function group name..then it will download all the function group related stuff like function modules, includes,etc..
       this download option is working fine...
       Now my problem is in upload option...
       how can i upload all the files and it forms a function group...
       I created a function group zfgroup and downloaded all the files related to this like function modules and include files...and deleted that function group...
       now using these files i have to create the function group when i click on the upload option.
       hope you guys got this question...
    thanks and regards
      raghu

    Hi,
    Check the solution you are look in for inthis link.
    <a href="/people/alvaro.tejadagalindo/blog/2006/03/18/taking-good-care-of-z-function-modules utility</a>
    Hope this helps.
    Cheers
    VJ
    Message was edited by: Vijayendra  Rao

  • One of the functional groups of the Logical Database "SDF" does not appear.

    Hello,
    I have a problem with the logical database "SDF". It has already defined 3 functional groups. When I select the buttom "display the contents" I can see all these groups with their owns fields.
    The problem is that when I use a transaction which contains this logical database, in the dynamic selections I can only see two of the functional groups. The last one doesn't appear there and I don't know why.
    How can I resolve my problem?
    Thank you very much in advance.
    Best Regards.

    1 hour is the default timeout for "ExternalCommandTimeout". So, it could be that this one measure group's fact query is taking longer than 1 hour for the first record.  You can see the query in the error messages and might like to try it out
    manually.  Note, a common issue is with referenced dimensions or Distinct Count when an inner join or Order By are added to the fact queries.
    A simple solution might be to simply increase the ExternalCommandTimeout in the SSAS properties page.  Try 7200, and if it completes in less than 2 hours, or fails after exactly 2 hours, you know this is the issue.
    Richard

  • Copy the Function Module one server to another server

    Hi Guy's,
    Please help me How to copy the Function module from one server to another server.
    Present requirement is like this, copy the FM from DRH-100 to NRH-100.
    Thanks and Regards,
    Sai

    if it is a zfm, u might have assigned a TR when cretaing this FM.so u need to relese this TR to the desired system.contact ur BASIS for the transport lanscape.
    if it is a standard FM, u better copy this FM to a ZFM and make it as RFC enabled if it is not RFC enabled and call this ZFM from the system in which want to call this FM by giving the logical system id in the destination while calling this FM.

  • How to delete the functional group from an Functional Module without ...

    Hi all,
    Good morning,
    We  have created an RFC  enabled FM. Now because of enchancement the functional group is to be removed. Is there any other way to remove the Fucntional group without deleting the FM. Please provide your valuable inputs for the same.
    Rewards for sure .
    Thanks
    Mohinder Singh Chauhan

    A function group is really one very large program with lots of includes.  One of these includes is your Function Module. 
    So, no, you can't do it through the attributes of the FM.  You have to create a new FG and reassign your FM to that group.
    matt

  • A list of global objects of the  function group "bbp_bid_inv"

    Hi everyone,
    Somebody have a list of all (or some) global objects ( i mean : internal tables, structures, transparent tables, ...etc) of the function group "bbp_bid_inv" ?
    Thanks & regards

    find out in se 80
    cheers!

  • Copying a function group gives error

    Dear All,
    I am copying a function a group JV05. I have copied evrything i.e all the includes, TOP etc. But when i activate the group it gives me error. What could be the problem? I have tried to activate the includes & TOP individually. Still it gives error for some variables. Please help me out.
    Thanks in advance!
    Regards,
    Prasad

    hi ,
    **Go to se80..**
    **1. Select function group**
    **2. Enter JV05 as name  "-----> click on spectacles button.**
    **3. Right click on JV05**
    **4. Select copy  "--------> give a Zfunction group name**
    **5. "Copy all the function modules in this function group with zfunctionmodules.**
    **6. Save & Activate.**
    Regards,

Maybe you are looking for