Copying to Network Drive Error code -36

Hi all,
Recently I have upgrade my MacPro from 10.5.8 to 10.6 and I encountered such problem.
I have read this post:
http://discussions.apple.com/thread.jspa?threadID=2139000
and tried any method including dot_clean, Enabling/Disabling named streams, update MacOS 10.6.3 to 10.6.5, delete any "." initial hidden file, disable writing .DS file by using TikerTool. But result is the same.
Here is my tested result and some information:
1. I use domain administrator to access the shared folder that shared from windows 2003 NAS.
2. I have tried using 10.5 connect to the same shared folder without any problem
3. I have tested windows XP to share a folder (both fat and ntfs format) and write from 10.6 without any problem
4. I have tested use another windows 2003 and share a folder (both fat and ntfs format) and write from 10.6 without any problem.
5. I have several upgraded 10.6 machine, the result is same.
Seems this problem only occur in windows 2003 NAS. Anyone experience such problem and found the solution?
Thanks a lot!
Karl

Hi all, I have make a few new test:
6. Share the same storage by using windows XP (fail)
7. Share the same storage by using another server 2003 (fail)
8. Create another share and login name for the same storage (fail)
9. Use command line utility to make the copy/move in 10.6.5 (success)

Similar Messages

New 790GX-GS65 Networking Driver Error Code 10

Just upgraded to the above mentioned mobo with a AMD Phenom II x4 BE, booted fine, drivers installing off the disc, everything installed correctly except the driver concerning the Realtek gigabit networking, got a code 10 on the device manager that says the driver software installed correctly, but failed to load properly.

running os?
you use drivers supplied with mainboard cd or those from msi web for your board?

When i connect my iphone to the computer, win 7 i get the mtp driver error (Code 31).

When i connect my iphone to the computer, win 7 i get the mtp driver error (Code 31).
I must mention that connecting the phone and accesing it as a camera worked before but at some point it didn't and i keep recieving this mtp driver error. I tried everything including deleting registry entries, reinstalling multiple times, use the log administrators command in cmd, i don't have a pass on my phone, nothing worked so far. Any help would be apreciated.

Yes I did.. Everything is ready. Just when I plug the cable into the phone and the computer nothing will happen.. When I plug it into our "business" laptop immediately it will show that it is connected... With this laptop I am using now, nothing happens..

TS3430 Apple usb driver error code 19 - How do I rectify?

My iPhone 5 does not connect with my laptop; it was working fine. I have a usb driver error code 19. how do I fix this?

Well, Apple's Support site states that "error 19" refers to:
19
dsNoPk2
package 2 not present [Disk Initialization]
So since the hard drive is unable to initialize, the implication is that the hard drive has failed, and your computer's symptoms tend to confirm this. I'm afraid its time to take the computer in for diagnosis and repair at this point.

Why can't I copy files from my external hard drive - error code -50.

I sm trying to back up an external hard drive to a network drive. Some files copy but not all;. SOmetimes a folder seems to have copied but then I see that most of the files inside have not. And sometimes I just get 'An unexpected error has occurred'. Error code - 50.
I need to have a back up copy of the files on this hard drive. How can I stop this happening and copy files properly and securely?
The external hard drive is a LaCie bought from Apple, share formatted FAT32.
The network drive is a WD MyBookLIve Duo which WD tell me should work equally well with any operating system.
Please advise. I need to archive a security copy of this data urgently
John Wood

Have u tried the usual? Safe boot. Delete finder plist files? etc. And the drives are formatted for mac yes?

Cannot delete file from external hard drive (error code 36) in Finder, but Terminal is ok

I have a relatively new Macbook Pro Retina 15" and have a Western Digital 1 TB Passport. I've been using the passport for about a year now without any problems on older Macbooks in my house. I used to be able to read and write to this drive no problem. I am using the Paragon NTFS for Mac software in order to read and write to the NTFS drive. When I navigate through the drive in Finder, if I try to create a new folder, I do not have a problem. If I try to delete that folder I just created, I get this error:
The Finder can’t complete the operation because some data in “untitled folder” can’t be read or written.
(Error code -36)
The folder has nothing in it whatsoever. I just created it. But if I go to Terminal and I run
rm -rf "untitled folder"
This works fine. Why is Terminal acting different than Finder? This does not happen on my other Macbooks. Thanks in advance.

Thanx for such qucik reply!!! The pages were great, it had an answer for my problem, but unfortunately it also involved me dealing with it only on the MacIntosh HD itself, not on mounted external drive I suppose... So it didn't work they say that there is an icon in the left corner indicating locked folder - I don't see any icon on it. It says you can untick the box to unlock the folder - there is no tick to be unticked. Finally, they say that if I don't have permition or rights I cannot delete it. But how do i change permittion which already says that i can read and write in it? So everything appears to be normal only I cannot delete it. there is not even any warnig telling me I don't have enough rights, it just requires the password and after me typing it in it makes the sound of scraping paper but does nothing more. I aslo had some problems with emptying Trash after being seemingly succesful with one file and had got so far to have them appear in the Trash (no clue how this one actully got there though..) I followd the advice and emptied the Trash with Terminal. The Folder is still there but it shows 0 Kb... So far so good BUT: It is still on the external drive, so I obviously only managed to copy it into the Trash!!! Phew, innit a bit too tight to poor owners, this macbook?? I want my rights back!

External Hard Drive(ERROR CODE 0) .DMG Back Up Issues. How to get more than 4gbs in .DMG back ups.

I am currently using a my external hard drive for my late 2009 Mac Mini, my brothers MBP and my sisters HP laptop. I have a Western Digital My Passport 1T external Hard Drive to back up all are information. I formatted it to work on mac and pc and its on the "MS-DOS(FAT) setup at the momment. Im trying to back up DMG files from my HDD hard drive in my computer to the External Hard Drive to pass them onto my brother. I understand the whole part of me getting the "Error Code 0" where i can only put 4gbs of storage for that. I wanted to no is there a way for me to format my external hard drive for it to work on a Mac and a PC but for me to also transfer my .dmg files with more than 4gbs of that storage to my external hard drive?
p.s Im running on OSX 10.6.8 and the DMG files are alittle more than 4 gbs. From 5-10gbs. Thank you for all the replys. It helps me out and others in the Apple community out!

Hi, Steve. Your proposed procedure is just fine until you get to this point:
...reformat the WD to be Mac friendly *and reformat in FAT32* ...
Reformatting the newly-reformatted Mac-friendly drive as FAT32 will, as you say, simply put you back where you were before, but with your data on a different drive. Omit that step, and you'll have a Mac-friendly drive that you can copy your data back onto.
If you normally work with files exceeding 4GB in size, you won't want any hard drive in FAT32 format. If for some reason you'd like all your external drives in NTFS format, download and install the NTFS-3G driver, which will enable your Mac to read *and write to* that disk format.

Audio driver error, code 10 error & Media device missing Error in Presario C772TU

Hello Hi to all,
I am Manikandan.D working in BOSCH India and new user for this forum.
I am having presario C7712TU model laptop, recently i reinstalled my Xp OS service pack 2.
after that i reinstalled all drivers, but it showing some error in audio device driver.
the error code is 10 and it is telling "media device missing"
I have installed UAA driver + conexant HD audio driver
Moreover i couldnt find any wireless LAN icon in network connection tab.
could any body help me..Since i am in Germany..Now helpless!
it is big trouble for me!!!
Many thanks in advance to all!

Dear Daniel,
Thank you very much for your reply and effort, help!
Yesterday i have installed Atheros driver...Now my wifi also turned on without any problem.
I think you doing great job for all the people. keep the same spirit and continue the support!
this has to be appreciated! why because some people they will break the head for the system problem.
you are giving solution for the headache not for the system!!!
anyways now my problem is solved thanks...!
if possible send me your mail id to the below address.
<text deleted for privacy>
i will keep in touch with you!
Message Edited by WendyM on 10-21-2009 07:04 AM

External Hard Drive error code -50

After I boot my iMac, my USB external drive mounts and functions as normal. After the computer has been left alone for a period of time (most notably, overnight) the drive still appears mounted on the desktop, I can read it, but attempting to write to it (or simply trying to create a new folder) reports back:
"The operation could not be completed. An unexpected error occurred (error code -50)."
Logging out of the user does not fix it. I have to restart the computer to get the ability to write to the drive. Any ideas?

My computer never sleeps, just powers the screen down. I can't eject the drive because it claims it is in use. I can't repair permissions (the options to verify or repair are both greyed out, and the information screen in Disk Utility states "Can Repair Permissions: No").
I have multiple drives in an external enclosure connected by USB (it is a Century EX35SW8_SB8-E). Oddly, I noticed that only one drive had the "Owners Enabled" set to "Yes", so I changed the permissions on the other drives to match, but that did not change anything.

Can't back-up to ext hard drive (Error code CE-37850-3)

Since the 2.55 update I haven't been able to back-up my saves to my external hard drive. I used to do this regularly as my online storage is full. Now when I try it I just get the error code CE-37850-3. Have tried unplugging and reconnecting the hard drive. Can anyone help?

hgwells wrote:
Leave the drive connected for a while (say 30 minutes), then try again. Am already doing this as I just leave the ext HD connected to the PS4 all the time, then at the end of a gaming session I back-up all the games I've played that day. My PS4 isn't even recognising the ext HD as when I click on USB storage to see what's on there I get the same error message. Never had these problems before this weeks update (2.55) Thanks for your reply anyway.

ITunes will not work on network drive Error (-54)

Greetings.
I recently got the new 27" iMac, and am converting my old Mac Pro 2009 to a "server."
On my Mac Pro, I had my iTunes folder on a separate drive, which was formatted exFAT. This was done specifically because I work cross-platform. So "Drive A" was my OSX Boot drive, "Drive B" was my Windows 7 Bootcamp drive, "Drive C" was my exFAT shard data drive and "Drive D" was Time Machine. The goal was, and is, to be able to use iTunes cross-platform without having to manage separate libraries.
Now, I would like to connect my iMac's iTunes (Mac side) to "Drive C," but I keep getting an error message: The iTunes Library file cannot be saved. An unknown error occurred (-54). At first I thought it was due to the fact that the Mac Pro kept going to sleep, so I changed the setting. That didn't work. I then checked permissions - and the permissions give my iMac read-write permission, so that *shouldn't* be the issue. I can write to the network drive just fine.
The issue can't be connectivity, because I am using ethernet, not wifi to connect the drives.
I cannot use target disk mode, because "Drive C" is not a boot drive.
So I need to know why iTunes cannot now write the Library file when permissions should be fine, it never had a problem with exFAT formatting in the last year I had that configuration and what can I do now to get iTunes to work over a network.
Both versions of iTunes are current.
The only remaining variable I can possibly think of is that the Mac Pro is using the latest version of Lion and not MacOSX Server.
Any insights would be greatly appreciated.

Try:
Trouble installing iTunes or QuickTime for Windows

Windows Server 2012 - Remote Apps - Mapped Network Drive Error

Hi Technet
I'm configuring Windows Server 2012 Standard with RDS Remote Apps. When I try to publish apps fra a shared network drive the I get this error i powershell:
C:\Users\administrator.PRO> New-RDRemoteApp -Alias "Microsoft C5" -DisplayName "Microsoft C5" -FilePath "Z:\C5W32.exe"
New-RDRemoteApp : Could not find the specified icon:
Computer name: PROSRV2.PRO.LOCAL
Icon path: Z:\C5W32.exe
Icon index: 0
At line:1 char:1
+ New-RDRemoteApp -Alias "Microsoft C5" -DisplayName "Microsoft C5" -FilePath "Z:\ ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Write-Error], WriteErrorException
+ FullyQualifiedErrorId : Microsoft.PowerShell.Commands.WriteErrorException,New-RDRemoteApp
When I try from manager:
I get this error:
Select RemoteApp programs
You must specify a file from the RD Session Host server
using the UNC path; for example PROSRV2.PRO.LOCAL
if the problem persists, ensure that the following Windows
Firewall exceptions are enabled:
1. File and Printer Sharing (SMB-Out)
2. File and Printer Sharing (SMB-In)
I have been able to do this pn 2008 R2 like 100 times with no problems, hope someone can help plz
Regards
Thomas Pedersen

Aurimas... try the method I tried and let me know if it works for you...
To publish an Application that is available only on a Mapped Drive.
E.g. Sage Pro Application needs to run as T:\Pro73\sbtw.exe
We have to be aware that it may give an error sometimes because it tries accessing the IconPath variable and that needs to be on a local path "C:" or "D:"
We were successful in publishing the application by runnig the command twice in Powershell.
The first time it gave an error and the second time it published it successfully and also made it available on the RD Web Access:
PS C:\Users\administrator.LAFE> New-RDRemoteApp -CollectionName QuickSessionCollection -
DisplayName "SagePro200" -FilePath T:\PRO73\sbtw.exe -IconPath "C:\Windows\RemotePackages
\CPubFarms\QuickSessionCollection\CPubRemoteApps\sbtw.ico"-UserGroups "lafe\citrix users"
Please note that it will show TWO SagePro200 RemoteApp Program names and the Aliases will be sbtw and sbtw(1), but only the later one will be visible online and workable.
You can always go back and 'unpublish' the extra RemoteAPP if you want to keep your interface clean.
Hello,
I was able to publish remote app using this method, but I had to specify icon path in UNC as I was performing the publishing operation from
RDCB server and my guess is that it was looking for icon in "C:\windows\..\program.ico" on the
RemoteApp server where the icon did not exist. After specifying -iconpath as UNC
\\RDCB\C$\windows\...\program.ico command was successful.

Can't copy a folder, getting error code -41

I can't copy or duplicate a folder. Doesn't seem to matter where I try to copy it (through finder). I seem to have the appropriate permissions. I checked disk utility and it said the disk was okay. Here is the full error:
*The operation can’t be completed because an unexpected error occurred (error code -41).*
I'm using Mac OS X Server 10.6.5 but this forum seemed more appropriate given the issue. The size of the folder is around 260MB. The folder is a grails project.
Can anyone please help me? This is really frustrating.
Thanks,
Ian

Yes, "cp -Rp" will treat ACLs properly and not duplicate like Finder, "cp -R" just ignores them, whatever works... but file a bug if you want this fixed (bugreporter.apple.com)
For those who want to fix their files that have tons of ACL you can kill them all, make a textedit (text only Command-Shift-T), paste this in:
#!/bin/bash
IFS=$'\t\n'
find "${@}" -exec chmod -N {} \;
Open terminal and add the execute bit with: chmod +x <drag file from finder into terminal> <Enter>
Then run with the name of the path as the argument... for more detail
http://hints.macworld.com/article.php?story=20070501065737278
For the troubleshooters:
I got it down to the bare minumum on a clean OS X Server install, not AD bound or anything extraneous. Just AFP running on a server with an IP with forward reverse lookup. I made a share, added admin (501) to the ACL (as Read only), touched a file and duplicated it in Finder, locally on the server.
10.6-10.6.2 functioned fine. 10.6.3 and 10.6.4 added bizarre behavior where a WRITE ACE was added to the ACL, but the ACEs weren't "stacking up", 10.6.5 and 10.6.6 added the redundant ACEs that when you tried copying/duplicating packages and apps with Finder would result in insane amounts of duplication, try Chess.app you'll get 18 ACEs deep in one Finder copy! 3rd copy fails with Error -41
So get reporting folks, 10.6.7 might be the last Snow Leopard update, and even if it isn't I'm getting pretty tired of dealing with this bug and don't want to wait until 10.6.8! So I just filed my bug #9160099 (another poster referenced his bug #8816661, that 343,438 bug reports later!)

Time Machine and Iomega Home Network Drive (error 45)

I purchased and installed a Iomega 2TB Home Network Drive today primarily for usage with OS X and Time Machine.
I tried to create a Time Machine backups from two different computers and both returned the error
The backup disk image "/volumes/backups-2/"mymacname.sparsebundle" could not be created (error 45)
I would love some guidance and how to over come this issue.
Thanks very much,
Henry Cline

Henry Cline1 wrote:
I purchased and installed a Iomega 2TB Home Network Drive today primarily for usage with OS X and Time Machine.
Time Machine does not back up to most network drives. Here's the criteria they must meet: Disks that can be used with Time Machine. And be careful here: just because some 3rd-party hardware claims to support Time Machine doesn't necessarily mean that Apple supports it, or that it will work in all circumstances.
You may find some hardware or "hacks" that might make other things work, in some cases, to a degree. But use them at your own risk.
First, since this is *unsupported by Apple,* there's nowhere to go when there's trouble.
Second, you're risking a future update preventing it from working, and perhaps rendering your backups useless.
I tried to create a Time Machine backups from two different computers and both returned the error
The backup disk image "/volumes/backups-2/"mymacname.sparsebundle" could not be created (error 45)
Try the renaming suggestions in #C9 of the Time Machine - Troubleshooting *User Tip,* also at the top of this forum.

Flash drive, Error code 0

Using my iMac, I exported a project from Final Cut Express using QT conversion to my desktop. It's 40:29 and 8.57 GB so I want to get it to my Mac Pro and use Compressor to make the file smaller.
I just inserted my new 32 GB SanDisk Cruzer flash drive into my iMac. It was recognized with no problem. But when I drag the QT file to the flash drive I get a window with this message:
"Sorry, the operation could not be completed because an unexpected error occured. (Error code 0)" I also get the QT logo with an exclamation point inside a yellow triangle.

Well, I just found the answer to my question which I will post here so others will not waste their money if you plan to buy a flash drive with the idea of conveniently transferring large files. This is from the SanDisk site:
Transferring a 4GB or larger file to a USB flash drive
Why can't I transfer a 4GB or larger file to my USB flash drive?
This is due to FAT32 limitation. Files larger than 4GB cannot be stored on FAT32 volume. Formatting the flash drive as NTFS will resolve this issue.
WARNING:
- Remember to backup your data. Formatting will delete all the data in your device.
- Formatting the device as NTFS will make it unable to be written to on a MAC computer. Most MAC computers can read NTFS, but not write.
- NTFS is a journaled filesystem, this creates more read/write activities. Therefore, it will decrease life expectancy of your device.
- Once the device is formatted as NTFS, you MUST use "Safely Remove Hardware".
http://kb.sandisk.com/app/answers/detail/a_id/289/sno/0

Copying to Network Drive Error code -36

Similar Messages

Maybe you are looking for