Copying Variables from BW platform to another BW platform

If I have a connection between two different BW platforms can I copy/replicate/transport the customer defined variables if so how and does the customer exit automatically come across? Thanks

If you want to create the table dynamically, then you have to use dynamic Sql. Didn't you like my above suggestion ? If you want I can post a small example of a similar stored procedure.
See also http://www.mcs.csuhayward.edu/support/oracle/doc/8.1.7/appdev.817/a76942/pc_07pls.htm#2778

Similar Messages

Copy variable from one thread to another

My program requires user to input a java file which contains the run() method.
In the input file, user can declare variables and use those variables inside the run method. User also need to enter the number of threads to be spawned.
The problem is how can I construct some method like "copy" which can copy the variable from one thread to another in my program? I can't do that since I don't know the name of the variables that the user inputted.
I've tried this:
class helloworld extends thread{
void run(){
String a="hello";
String b="world";
copy(0,1,a,b)
class myProgram {
Class c = Class.forName(fileName);         // file name of user's file
Thread t[] = new Thread[p];             // p is number of threads
     for (int i=0; i<p; i++){             // create threads
               t[i] = (Thread) c.newInstance();
               t.start();
public void copy(int sourThread, int destThread, String s1, String s2){
t[sourThread].s1=t[destThread].s2
But it doesn't work. It said "cannot resolve symbol s1 and s2".
please help. urgent. Thanks a lot in advance.

You need to seriously reconsider what you're allowing the user to do. The short answer to your problem is to use a shared, synchronized associative array.
However, since the user can specify any number of threads, you will have to resolve deadlocks, and the fact that you're asking this question suggests you will have problems doing so until you have read up on threads and shared variables in more detail. (I don't mean to be dismissive. Deadlocks and shared variables have to be customized to the application, i.e., you have to figure out just when each thread will need access to the variable, what kind of access, and when.)
In the meantime, take a step back and take a look at the big picture.
From what you've said, I would guess a common example of your application is that I want to be able to read file "foo.dat", uppercase each letter in the file, and write it out to "fooXXX.dat" where XXX reflects the thread number. And specify any number of threads I want.
Threads would not be the best way to accomplish this. Do this serially.
Alternatively, I could interpret your problem as in you need to create a main() function that's capable of reading someone else's dot-class file, clone the object and start it. In which case, why do you want to share variables? If the user did his job correctly, then his file will already contain shared variables (or copy them as appropriate). All you have to do is clone the object via the new keyword, then call start() in it.
You cannot share something when you don't know what you're sharing.
The third option is that you're doing this as an academic exercise (i.e., homework). Granted, yes, your professor may ask you to do things illogically just to prove they can be done. Unfortunately, we're not supposed to help you in that case. People who read this forum generally try to find logical and efficient ways of doing things.

Copying files from one workstation to another only works in one direction

I could copy files from my workstation to another workstation but could not copy files from that workstation to my workstation. There are 2 Cisco switches between these workstations.
I found out that one switch had its workstation ports hard coded to 100Mbps but the uplink ports (on both switches) were set to auto (the uplinks were 1 Gbps ports). This caused the copy problem. Once the w/s ports were set to auto, the problem
went away. I'm just wondering if anyone else has had this problem but found that the solution was something different than what I found?
William Fearn

I don't think that is possible, to platform specific. You'll need to make the directories accessible without password protection, or use another way of copying the files, such as FTP. There are multiple FTP packages available for java, such as:
http://jakarta.apache.org/commons/net/
(of course that would require setting up some sort of FTP server)

How can i copy apps from one computer to another?

how can i copy apps from one computer to another?

You don't mention which operating system you have so it's difficult to provide an answer since the mac and Windows stores the files differently.
The other thing you can do is just re-download the apps from the iTunes Store. Just login to the iTunes Store on the other computer using the same Apple ID. On the right-hand side of the iTunes Store page you will see a 'Purchased' link. Clicking on that will take you to a page that will list your past purchases which you can re-download to the new computer.

Copy values from a filed to another in different blocks in same table

Hi All,
How to copy value from a filed to another field in different blocks in same form ?
example if i change value in Field A of block 1 it should reflect in Field B block 2 and again if i change in Field B block 2 it should reflect in Field A of block 1.
values will change twice or thrice then it will not change. It is happening like that.
how to do this ?
Regards

Same table / different blocks
I guess, both blocks will be marked for update, and when your user presses commit, the same table will be updated twice!
Are you sure that this is what you want to do? Is the same record current in both blocks? If so, you better use 1 block (it can be spread over several canvases and windows) and synchronize the items with the "synchronize item" property.
Anyway: If you can't apply the synchronize-property bcos the items are in different blocks, you can synchronize with 2 when-validate-item triggers.
Wolfram

Copying value from one cursor to another

Hi,
I have a problem while copying values from one cursor to another cursor.
The code looks like below.
PROCEDURE XYZ
            TransactionResultSet OUT NOCOPY types.ref_cursor,
IS
            temp_cursor types.ref_cursor;
            wip_rec types.ref_cursor;
BEGIN
DECLARE
                CURSOR temp_cursor IS
            SELECT ...........
END;
BEGIN
    FOR wip_rec IN temp_cursor
    LOOP
    update tinsagr set something
    where {the condition}
        IF SQL%ROWCOUNT = 0 THEN
dbms_output.put_line('this is test ');
        Fetch wip_rec into TransactionResultSet;
     END IF;
   END LOOP;so basically i want to iterate the "temp_cursor" and depending on the values i get it from here i shall update a table. Actually i want to exclude few records from "temp_cursor" and add it/copy rest of the records to "TransactionResultSet"
That means say initially " temp_cursor" has 100 records and i updated 5 records in a table and same number of records should be excluded and rest should be added to the output cursor TransactionResultSet.
How do i achieve it?
while saving i am getting
(1): PLS-00456: item 'WIP_REC' is not a cursor.
Do any one has any idea what to do in such scenario?

There are options like....
SQL> CREATE OR REPLACE TYPE emp_obj AS OBJECT (ename VARCHAR2(50), dept NUMBER);
2 /
Type created.
SQL> CREATE OR REPLACE TYPE emp_tbl IS TABLE OF emp_obj;
2 /
Type created.
SQL> set serverou on
SP2-0158: unknown SET option "serverou"
SQL> set serverout on
SQL> DECLARE
2    rc      sys_refcursor;
3    v_ename emp.ename%TYPE;
4    v_dept emp.deptno%TYPE;
5    ---End Of Local Varriable Declaration
6    --Procedire declaration !
7    PROCEDURE TEST_CUR(pi_out_ref_cur IN OUT sys_refcursor) IS
8      emp_rec emp_tbl;
9    BEGIN
10      /* This BULK COLLECT can be done with explicit cursor,Ref Cursor
11      with some simple modification, Here I have used implicit cursor! */
12      SELECT emp_obj(ename, deptno) --Casting as the object
13      BULK COLLECT
14        INTO emp_rec
15        FROM emp
16       WHERE deptno = 10;
17
18      dbms_output.put_line('Records selected are:');
19      FOR i in 1 .. emp_rec.COUNT LOOP
20        dbms_output.put_line(emp_rec(i).ename || '--' || emp_rec(i).dept);
21      END LOOP;
22      --Now we are filtering the record and may be doing some operation with each record.
23      FOR i in 1 .. emp_rec.COUNT LOOP
24        IF emp_rec(i).ename = 'KING' THEN
25          --You can change this IF according to your need.
26          emp_rec.DELETE(i);
27        END IF;
28      END LOOP;
29      OPEN pi_out_ref_cur FOR
30        SELECT * FROM TABLE(emp_rec); --Using the TYPE AS table.
31    END TEST_CUR;
32    /* Main execution or procedure calling section*/
33 BEGIN
34    --Actual calling
35    TEST_CUR(rc);
36    dbms_output.new_line;
37    dbms_output.put_line('Now in Ref Cursor');
38    dbms_output.put_line('****************');
39    LOOP
40      FETCH rc
41        INTO v_ename, v_dept;
42      dbms_output.put_line(v_ename || '--' || v_dept);
43      EXIT WHEN rc%NOTFOUND;
44    END LOOP;
45
46 END;
47 /
Records selected are:
CLARK--10
KING--10
MILLER--10
Now in Ref Cursor
CLARK--10
MILLER--10
MILLER--10
PL/SQL procedure successfully completed.
SQL>

Copying photos from one computer to another, with descriptions

After editing photo descriptions and locations in iPhoto, it is desireable to be able to copy them to iPhoto on another computer, with the associated photo descriptions and locations. In principle, this is possible by selecting all desired photos, then selecting File -> Export... In the Export dialog box, in the "File Export" tab, select "Include: Titles and keywords", and "Include: Location information". Copy the exported files to the other computer, and do a File -> Import to Library ...
In practice, this works fine with images taken by some cameras, and not with images from others. In my limited experience with a Fuji F80EXR and a Canon SX230HS, the above work flow works with the Fuji. But, with the Canon, while the exported files clearly have the description data embedded in them (as seen by GraphicConverter), it is not imported into iPhoto, nor is it visible in Preview's Inspector. The workaround I use is to run an exiftool command on the exported files.
Exiftool is a command line utility that can read and write meta data in image files:
http://owl.phy.queensu.ca/~phil/exiftool/
I run the following command on the exported files to rewrite the IPTC Caption:
exiftool −overwrite_original_in_place -tagsfromfile %f.jpg -ext jpg -"IPTC:Caption-Abstract>IPTC:Caption-Abstract" *.jpg
Note that the above command overwrites the files that were exported from iPhoto. If you wish to leave the original files intact, with an "_original" appended to the file name, run:
exiftool -tagsfromfile %f.jpg -ext jpg -"IPTC:Caption-Abstract>IPTC:Caption-Abstract" *.jpg
I'm not sure why it is necessary to copy and rewrite that data. Perhaps there is something strange in the format of the meta data in the file as it comes from the camera, and the iPhoto export does not correct this strangeness. Copying and rewriting the data by exiftool seems to put things right.
The above works for me, but is somewhat unwieldy. Is there a better way to copy photos from one computer to another, if iPhoto refuses to import the description data that it was written to the exported files?

Thanks for the pointer. I did a test with 10 images, and confirmed the iPLM works, even with the problematic images from my Canon SX230HS.
The workflow is to use iPLM to create a new Library on the computer that has the photos you want to copy. Copy the photos to the new Library. Copy the new Library to the second computer using a method of your choice (file sharing, USB flash drive, etc). Copy the photos from the new Library to the existing iPhoto Library.
iPLM costs $20, whereas my original solution was free (but you need to invest the time to get exiftool installed and working). But, unlike exiftools, iPLM also copies over the Faces information, so it is likely a worthwhile investment if you use that feature.

How can I copy songs from one iPod to another?

I received a new iPod Classic (last generation) and I'm trying to transfer my songs from my old iPod Nano (also last generation).
My iTunes library is also split up between my two parent's houses and I only have half the songs on my Nano in this computer's library.
Is there a way to copy only the songs on the +iPod Nano+ (not the iTunes library) and drop them onto the new iPod?

*Is there a way to copy only the songs on the iPod Nano (not the iTunes library) and drop them onto the new iPod?*
You can't copy directly from one iPod to another, you have to copy the songs back to iTunes and update the new iPod from there. If you have any iTunes Music Store purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article: Copying iTunes Store purchases from your iPod to a computer
The transfer of content from other sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
TuneJack Windows Only
iPod2PC Windows Only
iGadget Windows Only
iDump Windows Only
SharePod Windows Only
iRepo Mac and Windows
iPodRip Mac & Windows
YamiPod Mac and Windows
Music Rescue Mac & Windows
iPodCopy Mac and Windows
There is also a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows or a Mac. The procedure is a bit involved and won't recover playlists but if you're interested it's available at this link: Two-way Street: Moving Music Off the iPod

How can I copy text from one card to another while creating cards using Iphoto?

I created two cards with different pictures using Iphoto on Macnotebook.
I want to use the same text message.
How can I copy text from one card to another?

select the text and copy (edit menu ==> copy) tehn gpo to the next card and paste
LN

How do I copy text from one layer to another?

I have Googled this but not a single answer seems to work.
I am using Photoshop CS4 on OS X 10.6.7.
OK, so I have a layer that has some text in it. I would like to be able to simply copy that text from one layer to another, but this seems to be impossible as the Edit Paste menu item is grayed out after I have copied it in to the clipboard. I can paste it into the SAME layer, but not into another layer.
This is how I am trying to do this.
In the layer with the text, click on the "T" icon to the left.
Click on the text, in the layer that I want to copy.
I select the text (either by clicking and dragging or pressing Command-A).
Next I press Command-C.
Then I click on the layer In the Layer Panel) where I want to paste the text.
Pressing Command-V is impossible because the Edit-Paste menu option is grayed out!!!!
WHY??????
Perhaps more importantly, HOW do I copy text from one layer to another?

First thing you can simply right click on the Text Layer and choose Duplicate Layer. But that will create a new Text Lay
er identical to the one you have.
To answer your question in your case.... Create the Text Layer. Make a New Layer. Or have the layer you want to paste into visible.
Highlight the text layer in the Layer Palette and Ctrl+Click (Win) Cmd+Click(Mac) so that you see marching ants walking around your text.
Edit>Copy.
Then highlight your Layer you want to paste into and hit Edit>Paste or Cmd+V / Ctrl+V.

HT3819 how do I copy songs from one ipod to another

How do I copy songs from one ipod to another?

Transfer the songs to iTunes and then sync to the other iPod.

Can I copy clips from one project to another? The clips are still frames captured within a video event.

Can I copy clips from one project to another? The clips are frames saved as stills from a video event. I try the copy & paste but it does not seem to work.

The video was converted into MP4 and then I could get it into iMovie events. I had right clicked and saved farmes as stills. ABout 50 of them, When I tried to copy and paste those stills into another project I couldn't. They came up blank.
I ended up going to a Genius appointment at my APPLE store this afternoon and was told that those "stills" aren't really anything. Not a .jpg or video, so the program doesn't recognize them. So instead I'm using the Project with the 50 stills and copying other .jpgs and video into it. (This is for a 1961 Class Reunion, so it's old stuff). Seems to work so far.
So bottom line seems to be I can use these stills created from a video in the project in which they were created, but no where else. Do you know a way around this?

How do I copy photos from one iPad to another iPad?

How do I copy photos from one ipad to another ipad without using my Mac?

https://appsto.re/us/SQ8Wv.i
This app helps you to upload easy all you photos by selecting all
to your dropbox account,
to Google Drive,
To your computer,
to another device,

How do i copy music from one ipod to another with 1 cord?

how do i copy music from one ipod to another with 1 cord?

You cannot copy content directly from one iPod to another. If the music was purchased from the iTunes Store, you have the following options:
- sync the iPod to your computer, transfer the content to iTunes, and then connect the other iPod and sync from iTunes
- use iCloud (which requires iOS 5).
- download the music from from the iTunes Store to the second iPod. See:
http://support.apple.com/kb/ht2519
Regards.
Message was edited by: varjak paw

How do you copy files from one user to another

How do you copy files from one user to another user on the same machine?

open your home folder in finder move file to public, log into other account, click the go tab on the finder menu, select computer, your hard drive (Macintosh HD Default)>Users, the origonal user> public and drag that file to your specified folder.
hope it works
Craig.

How do you copy automation from one track to another?

How do you copy automation from one track to another? Occassionally I mistakenly blow away a track's automation. I open up an earlier version of the song to try to get the automation. It doesn't seem that you can copy and paste the data. After some struggle, I find a way. Is there an easy way?

1. Copy the track containing the desired automation to another track. (create a track below it to keep things organized)
2. Double click on the region and delete the notes.
3. Now copy the region to the desired track.
P.S. Of course when Logic asks if you want to copy the automation data you say yes)

Copying Variables from BW platform to another BW platform

Similar Messages

Maybe you are looking for