COR6 can't confirm due to batch
I try to confirm a process order, but encounter below error:
Batch 3000001 Z001 Z010 0000000078 does not exist
Message no. M7042
Diagnosis
For material 3000001, you have entered a batch that does not exist in plant Z001, storage location Z010.
Procedure
If this error has occurred during the entry of a reservation, you can do the following:
Enter the reservation without specifying the batch. The reservation can be posted on a non-batch-specific basis. The batch is not determined until the goods movement is posted.
If you wish to reserve a certain batch, you can call up the stock overview to display a list of existing batches.
If this error occurred on entry of a physical inventory document, you can do the following:
Do not enter a batch. The system will automatically determine all batches that can be included in the physical inventory document.
But I have use MSC1N to create the batch 0000000078 , I didn't put any production date, I put class type:023, this batch appeared in BMBC, Do I need to release this batch, how to release?
if I remove 78 batch and use batch determination in COR6, It says
T331 entry for warehouse number 301 and storage type not found
Message no. LC1004
what's wrong? how to confirm the material 3000001?
Dear
Please check wether you have this set up in place :
1. If you want to do the batch determination during confirmation then you have to create search strategy in MBC1 with MovType/Plnt/MatlNo
2.Did you mark automatic Batch Determination flag in OPJ2 ??
3.Check the batch determination procedure for process order in COB2 ??
4. Check the batch selection criteria in 000000078 whether process order date ?
Refer my earlier thread : batch determination COR6N
Automatic batch determination in process order
Try and check
Regards
JH
Similar Messages
-
APP-SQLAP-10252: You cannot Confirm a payment batch
Dear all:
IN ORACLE EBS 11.5.9 , When I click the button "Action 1" in "Payment --> Entry --> Payment Batch" and choose the "Confirm the payment Batch" will show the error:
*"APP-SQLAP-10252: You cannot Confirm a payment batch that does not have any payment documents"*
How can I fix the issue?
Regards
TerryDear Hussein:
Thank you for your reply. I've checked the ad_bugs and find the Patch 3682716 and 2375849 had been applied. My case seems like hit the Note: 282133.1. I was new for the AP module, I'm not sure the directory of the setting in Note 282133.1. Can you tell me the directory?
1. Review the Preliminary Payment Register output file. It should show an invoice with Document
Number=******* and message No Supplier Bank
2. Check that there is an existing supplier bank
3. Check that a supplier bank is attached to the supplier site for the impacted invoice
4. Check that the Remit-to bank account in Invoice Payment Schedules is correctly populated.
Regards
Terry -
Error: Service process cannot be confirmed due to its status
Hi Experts,
we want to create a Service Notification (BUS2000117) as a follow-up document of a service order (BUS2000116). The problem is that we receive the following error:
Service process cannot be confirmed due to its status
*Diagnosis*
You cannot enter a confirmation for the service process due to its status.
*System Response*
To enable you to enter a confirmation for a service process, it must be released and may not yet have the status Closed .
*Procedure*
Check the service process status and if necessary, change it.
How can i shut off the control of the status as we need to create service confirmation of service orders which are still in process. Is there any customizing?
Best Regards
OliverTo solve the problem without using the note it is possible to change customizing.
Customer Relationship Management -> Transactions -> Status Management -> Define Status Profile for User Status:
In Transaction Control is has to be assigned the Business Transaction 'To be distributed' to the relevant status.
Afterwards the service notification can be created without problems. -
Hi,
I wrote a Entity bean/Session facade that transacts a whole bunch of records to the database using the enable-batch-operations field within my weblogic-rdbms-jar DD.
I want to confirm that's it's performing as advertised. Namely, I want to ensure that it's batching the group of DB operations at the commit of the transaction. How can I confirm this?
The one thing I doing now to confirm this (I think) is using the weblogic.JDBCSQL debug flag on App server startup. I'm seeing that the JDBC addBatch() method is being called. I assume this indeed verification, but are there better metrics to observe the efficiency of this CMP style batch update/insert operation?You can enable JDBC logging in the console. That may produce slightly different output. But it will show you all of the JDBC activity that is taking place.
-
Hi all,
when will the batch assignment ( multiple batches ) takes place - at goods receipt ( order confirmation ) for each process order ?
we will be prompted for the batch assignment ?
thanks
VinuHi,
Yes system will create three process order considering you have maintain maximum lot lize as 1 Lac in Mateial master MRP 1 View.
and these three process order will have different three batches considering you have batch number assignment as the time of release of production order.
this can be multiple batches as well if partial confirmation done and batch number assignment is done on GR.
If you are looking for one batch for three process order you need to go with development.
Thanks -
Can not confirm the qty in schedule line in MTO case
Hi All,
I used item category ZTAN for Make-to-order purpose when I create the sales order. I set the KEVV for ZTAN in requirement assignment and requirement class 060 is assigned to KEVV.In 060 I set the availiablity is false, requirement transfer is true and Allocation Indicator = 3.
Then I do below transaction in SAP:
1/Create sales order
2/Run MRP
3/Generate the production order
4/GR against production order
5/Create delivery note
By the way, the strategy group for the my finished goods is 40.
But in the step 5, the system tell me that not confirmed qty in the order schedule line so that I can not create the Delivery. I go back to sales order and check the schedule line, but and press the button of Item Availiablity, the system can not confirmed the qty for the schedule line. Do any one know what probelm in my setting or oerations?? I will appreciate if any feedback. Thank you in advance.
JoeHi Friends,
Any comments please? It is quite urgent.
BR
Joe -
It seems that the new version of iPhoto will no longer share photos between computers on the same network. Can anyone confirm this?
lovinmymac wrote:
I have "automatically create previews" in the preferences UNCHECKED. Why is Aperture creating previews? For the screen image?
You might also need to turn Preview generation off for any existing Projects. Select the Project in the Projects pane and use the cog button at the top of the pane to uncheck 'Maintain Previews For Project'.
Ian -
How can I convert a large batch of NEFs to JPGs in one step or action?
How can I convert a large batch of NEFs to JPGs in one step or action? I'm very new to Lightroom and know almost nothing about it, so I need to know step-by-step. I've seen online advise about exporting but I don't know what that means - export from where to where? Can anyone help me? Thanks!
I suggest you take a little time to watch some tutorials. If you are that new to Lightroom that you don't understand what export means then it would probably be a good idea for you to get some other information as well. If you don't I think you'll find Lightroom can be very confusing. You haven't indicated what version of Lightroom you are using. The link I'm providing you is a series of getting started videos for Lightroom 5. And just about everything in this series will apply to other versions. You will note that there is one video devoted exclusively to exporting images. But I think you really need to watch the whole series.
Getting Started with Adobe Photoshop Lightroom 5 | Adobe TV -
I am having a problem with the new iTunes store. I can connect my ipod, and it will show that it is syncing. Once the sync is complete on iTunes, my ipod still shows that it is connected, do not eject. I have not had a problem with this until the new verision of iTunes. When I go to eject my ipod, it tells me that it can't eject due to application being used in another program. I did receive an ipad 2 for Christmas, that I also sync with iTunes, but only the ipad shows up in my devices on the site, what happened to my ipod device and how to add it back to devices? Help is greatly appreciated. Thanks.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
hi, i bought a irig to connect my guitar on my macbook pro 2012, but when i use the irig in my mac, it doesnt recognize, so i cant choose it on preferences of sound, what can i do? (the sound of my guitar goes by IRIG but I can not hear due to feedback and when I try to record another track on the garageband, the sounds recorded on the new track is catching the sound of another track recorded)
Turn the internal mic level off. Use headphones as monitors.
-
trying to restore new phone with backup from previous. itunes can not finish due to "unable to load SyncUICoreLocalized.dll" what do i do now?
See this discussion: iTunes Sync Error with iPhone
-
Can't install due to password issue
I've reset the password 3X and still can't download due to password issue. Help!
This password prompt is presented by your operating system, and is intended to keep you from accidentally installing software.
If this is your personal machine and you don't need a password to log into the computer when it first starts up, you can probably leave the password blank and click OK to get past this prompt. If this is your personal machine and your normal password isn't working, check to make sure that CAPS LOCK is off, and type the password carefully.
If this is your work machine and it's asking for an Administrator password, well, you'll need to have a conversation with your friendly IT person.
If you're still stumped, you may need to reset the password on your Mac:
http://support.apple.com/kb/PH18653
http://support.apple.com/kb/PH14325
http://support.apple.com/en-us/HT201240 -
Can't update due to message saying a prior update is still running and to reboot, but I have rebooted at least 4 or 5 times What do I need to remove to get the install to work?
I am stuck at FireFox 3.6.18 as no update actually installs, even when I am logged in as the admin.
i am running XP SP3
I have the update files for version 4, 6, 8, and 10. IF I can figure out the error - probably in the registry - which update should I start withIf there are problems with updating then best is to download the full version and uninstall the currently installed version and delete the Firefox program folder to remove any leftover files.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 10.0.x: http://www.mozilla.org/en-US/firefox/all.html
*Firefox 3.6.x: http://www.mozilla.org/en-US/firefox/all-older.html
Uninstall your current Firefox version, if possible.
*Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data because all profile folders will be removed.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
Wty issue - Can't Posted due to error Action T043 Post version IV to FI
Hi Experts,
I have one problem which is some of the wrty claims can't posted due to error message
log not found (in memory ) and also Action T043 POst version IV to FI not carried out as there was an error in a previous version.
For info, the earlier, yes this claim have error but already rectify. However still can't posted.
Hence, request your advise how to resolve my problem...
rgds,After a lot of searching I finally found the solution to my problem. I had to enable IOMMU in the BIOS on my motherboard (Gigabyte 970A-D3).
In case it helps someone else, I found the solution in the following forum post:
http://ubuntuforums.org/showthread.php?t=2114055
Another related post is:
http://ubuntuforums.org/showthread.php?t=2111223
As an aside, I'm not really sure why when IOMMU is disabled, 32-bit kernels work, but 64-bit kernels don't. I'm guessing IOMMU support is disabled in 32-bit kernels while it is enabled in 64-bit kernels. Or, it is at least handled differently.
Last edited by tlawren (2013-03-12 13:20:35) -
CS4 Premiere: Can't open due to inaccessible to Importer Process Server
CS4 Premiere: Can't open due to inaccessible to Importer Process Server:
Dear Guru:
After subject:
I uninstalled it;
Re-installed it;
Reopen it,
No luck, same error message ...
A friend's wedding reflash is set on 12/22, I have yet to open my Premiere?!!! Heeelp... Please...
Appreciate !
ForestHi, Jeff:
My system is XP; before the premiere worked well.
More detail story: Premiere could not open 3 days ago, no fix, some one sent me a crack software, I used it, no luck. Another nice guy told that is for non-legal Premiere, surely it won't work.
I tried to remove Premirere; difficult; some one suggested me to use Adobe CS4 cleaner from Adobe. Then it was removed. I re-install Premiere; During the process, abnomal thing I remember was: I can't input product S/N, so I had to use 30-day trial.
During the installation, it was stopped by Windows Installer issue, I restarted Windows Installer, then the process continued...
I have two log files, don't know how to attach into this message. But, can't find any problem therein.
Heverever, when I tried to open newly installed Premiere, error message says: ---can't open, reason is exactly same with very beginning: Can't communicate with Inporter Process Server....
Appreciate!
Forest
<Removed by Moderator>
Maybe you are looking for
-
Upgraded to Yosemite. When I connect to my usual VPN connection, I can no longer connect to email, internet, etc. Only happening on my MacBook Pro. My iMac works fine. Thoughts?
-
How can I download hologram in I phone 4s?
How can I download hologram in I phone 4s?
-
I'm running XP Pro. System has been running extremely slow; have tried other options but no success. Tried to set FF back to default, but I get the message: XUL Runner Error: Platform version "15.0.1" is not compatible w/minVersion >=12.0, maxVersion
-
Why can't I pickup my own hotspot signal on my iphone4
I use my mobile hotspot on my iPhone4 to operate my laptop and other devises, but I can not receive a signal on my own phone which is producing it, what's wrong, anyone?
-
Je n'arrive pas à activer dans ITUNES le partage à domicile code erreur : 5505
J'ai besoin d'aide car je n'arrive pas à activer APPLE TV pour des problèmes d'identifiants et mot de passe En effet, ITUNES me donne un code erreur 5506 : le partage à domicile ne peut être activé merci de bien vouloir m'aider