Core 2 Quad Q8400 Problem (P6N SLI Platinum) [FIXED]

Hello, I recently bought an Intel Core 2 Quad Q8400 with the understanding that my P6N SLI Platinum will support Yorkfield cores, given I have the latest BIOS. I updated my BIOS to 1.6, yet it just hangs on the MSI screen and will not POST. I just want to know if I indeed do have the latest BIOS, and if so, if there's anything I or MSI can do to remedy this problem. I really don't have enough money for a new mobo or CPU, and I'm going to be extremely irritated if I just wasted $170 on this... Thanks in advance.

Quote from: alj on 10-November-10, 19:27:09
I'm here for help and complain, no msi is not supposed to know what will be intel releases, but  i think they can fix the problem by releasing a new bios or simply put on the boxes models when writing that it support this or that technology
if you searched a little on msi.com you would have ended up here:
www.msi.com/index.php?func=prodcpu2&prod_no=1140&maincat_no=1
here it says what  CPU 's the board can run.
so MSI does say, what you can use, but it doesnt say on the box, cause it changes all the time, so they keep an online list.
and no, they cant write a new BIOS, its a chipset limitation from the NVIDIA chipset that cant be overcome by BIOS update unfortunatly.
I would go for a cheap P45 board, they can almost run all s775 CPU's and its newer then the P6N.

Similar Messages

  • P6N SLI Platinum & Intel-Core 2 QuadQ8300

    does the P6N SLI Platinum support the Intel-Core 2 QuadQ8300 cpu ?

    Nope, the P6N plat will not support Yorkfield quadcores e.g. the Q8xxx and Q9xxx, only Wolfdale dualcores, e.g. E7xxx and E8xxx and even then, sometimes, you have to send in the board to get parts added to support those dualcores.
    Its free of service though, you only pay postage/shipping.
    It will support older quads like the Q6xxx range, if you can still get one that is.

  • Dual Core Center- MSI P6N SLI Platinum and MSI 8800 GTS 640

    I have both the MSI 650i MOBO and the MSI 8800 GTS vidcard. When using an Asus P5B Dlx MOBO and this vidcard, Dual Core Center was installed and displayed the information for the videocard and allowed a mild OC. Now with both MSI products in the case, Dual Core Center only displays the information on the MOBO-- no 8800 GTS information. The tab at the top for the VGA does not bring up anything.  ??? I have tried installing the version on each one of the disks that came with each piece of equipment again and it doesn't seem to make a difference, it doesn't work. I downloaded the most recent version of the utility from the MSI site and still get only the MOBO information. How do I get the display for the video card.
    Or since the MSI utilities typically are listed on the forums as not being the greatest, what else can I/should I be using instead?
    {I'll put this in the graphics forum too as it hits both areas...}

    Running a P6N SLI Platinum and a MSI 7900GTO with Dualcorecenter 2004 and everything is ok.
    Never installed any driver from the MSI CD which comes with the board or graphics card. All drivers are downloaded
    from Nvidia.
    Maybe the 8800 series is not supported yet.

  • MSI P6N SLI Platinum Sound problem

    M using MSI P6N SLI Platinum (MS-7350), i am having problem with sound, i have attached 5.1 sound system all speakers are working fine accept front right, may i know what the problem is ? I've Tried everything thet was possible, Head phone, Speaker Wire, etc. etc.

    What if you switched the speakers around? Does the signal from front right still missing?

  • MSI P6N SLI Platinum + 3TB HDD

    Hello, I want to buy a 3TB SATA DRIVE for my old MSI P6N SLI Platinum and i want to know if i will have any problem! 
    SPECS:
    MSI P6N SLI Platinum (nForce 430i) Bios v1.7
    Intel Core 2 Quad Q6600@3Ghz
    4x1GB Kingston ValueRAM 1Gb DDR2 800
    F.A. XION XON-630F12P 630 Watts
    Sapphire Radeon HD 5850 Vapor-X 1GB DDR5
    Windows 7 Professional x64
    HARD DRIVE:
    3TB TOSHIBA DT01ACA300
    thanks!

    As I already said:
    Quote from: flobelix on 29-January-13, 23:58:02
    No, that won't work as that requires a UEFI bios and GPT format which is both not possible with your old board just supporting classic bios. You won't be able to access the entire drive space which makes a (costly) 3TB HDD quite useless.
    Better just get nothing above a 2TB HDD.
    Connection won't change that.

  • MediaShield RAID 5 implementation on a P6N SLI Platinum plus boot question

    Hi guys
    I have a P6N SLI Platinum I am considering using to replace my old decrepit Thecus N4100+ NAS enclosure. My NAS has four 750Gb SATA II drives in RAID 5 giving a total usable amount of about 2Tb.
    I have a few questions please:
    What is the maximum size RAID that MediaShield will support? I seem to recall reading somewhere it was 1.6Tb? This is a problem with 3Tb storage (1/4 redundancy)!!
    What is the performance like running RAID 5? What are the read/write times like?
    How much of a performance hit does the PC take running RAID 5 with MediaShield? This box has an E5500 quad core 4*2.8Ghz chip but is running some very hungry software (one build is a DAW based on Cubase and various VSTs; another is running Photoshop CS3) which I can't afford to be tied up sorting out low level RAID stuff if it's going to be a problem. Can I dedicate one of my four cores to the XOR for the RAID 5 freeing up the other three for actual PC stuff?
    There is currently one SATA drive already in this box containing the OS. If I use the four SATA ports for the MediaShield RAID and buy a 3rd party PCI/PCIE SATA controller card to plug this current drive into will I be able to set it to boot from it or do I need to migrate the drive to an IDE drive and put it on the IDE chain?
    Many thanks in advance you guys.
    Cheers

    Where do I start?
    I have a E5500, it's a dual core chip.
    Second, media shield sucks. Don't use it unless absolutely necessary.
    Buy a pci-e 1x 'firmware' card, I use the RocketRaid 2300 cards, good and cheap. Good, usable  RAID5.
    They have a performance advantage, a load time advantage, cpu utilization advantage, and most importantly, if you want to migrate your array over to another motherboard, you can. Easily.
    If your mobo dies, and you replace it with a more current one, your array is toast with mediashield.\
    Boot from a motherboard sata port. Don't boot from a RAID 5 array, trust me.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16816115029

  • [P6N SLI Platinum] black screen NO BOOT after D-bracket replug [RMA-SOLVED]

    Quick setup specs;
    P6N SLI Platinum
    E6600 (box/stock 2400mhz basic)
    2x 1Gb DDR2 6400 Gskill HZ
    Sapphire ATI X1600Pro (PCI-e basic)
    Aerocool Zero DBA 620W
    (2 HDs sata, 2 Hds pata, 2 optical pata at first -all OK at first, disconnected after, so irrelevant here ,( )
    (XP Pro clean new install from start)
    I tried to check the forum old posts before trying to write that new one, but could not find any really related totally adequate posts so far (or i missed them, sorry if so, then -?). I could already find very useful informations on first aid usual 'rebooting' procedures to follow with minimum new boot configurations, d-bracket new LED signals etc. But so far no luck, all same, nothing better, nothing cured here for the stuation here. ,(( Also excuse my english if not perfect, i am not english either. ,(
    VERY bad & sad problem here... ,(((( :
    All was working perfectly great during 5 days.. the P6N SLI platinum install went GREAT initially (as normal, not a first pc built, all normally happening, so far so good, etc).... all hardwares compatible together at first (dedicated ATX 'full' 8x8 pins connector too for the cpu only for ex -all working perfect at first try. quick tensions 5V/12V under msi dual core control tool perfect too etc), was great easy going/ great strong ultra-stability feeling on the hardware side.. i was just now concentrating on the software side (no special BIOS tweaks even attempted so far, all on basics-normal e6600/ddr2 auto-settings, apart at the end ddr2 quick test -when problem occured- on 450(900?)Mhz at 2.1V, far far easy under its possible specs max anyway.. and had been working perfect for 3 days with that little ddr2 boost try -no time for special bios further tweakings now, etc), reinstalling and transfering/reorganizing slowly my necessary files/hds/softwares from old to new setup, no oc, nothing special tempted (i was planning oc, new cpu more suited fan/silver6 etc only for the end..), LAN file sharing setup done, Realtek audio setup test done, etc ; installation had been so far one of the quickest and problem free ever... explaining maybe also my fatal lack of cautioun for just (too much) 3 sec in the end after 5/- days of perfect working new ring going on.. ,((( :
    At first, i also tried to immediately install the D-Bracket too to check possible hardware install problems -very useful feature i of course thought too..and wanted to try too, "in case of"..- (installing it from quick reading of the printed manual..with no colour pic coding inside..and quick error coming from there thereafter with an initial mismatch usb/jbd1 inverted plugs connections.. *both* having the exact same pins numbers and dispositions, beeing side by side on mainboard layout.. and so able to connect both headers indifferently.. so i did not see it immediately (( .. and no way to see it otherwise as such, anyway.. ,( ), just to be sure all was ok. I noticed that LED were of course, never lightning (not normal).. but as EVERYTHING else was working fine (GLAN, sound, etc etc).. i did not bother more than that -- error checking not necessary.
    Till that fatal clumsy day i wanted suddenly to.. check the D-bracket too. ((((
    All was working well, XP pro opened for hours as usual etc..
    i had not yet totally finished to install the motherboard in the pc-case (always on desk, free in sight..)... so i could always see the connections on it. ... and i noticed that ... the colour headers codes were NOT matching (usb=yellow..).. i had just stupidly initially badly connected the D-Bracket jdb1/usb adjacent plugs (inverting them), so... And still, all had ever worked perfect.. except the D-Bracket, of course, was sending back no lights then, obviously.. so i did the fatal error.. confident all was stable enough and strong if even that initial plug error had had no consequences at all.. i did the fatal bad move to try to UNPLUG the D-Bracket connectors and put them back in right orders WITHOUT switching OFF the power supply so... like an hot USB plug, sort of, in a way. fatal error.. :( :( :(
    As soon as i began to remove the usb/jdb1 connectors and put them back in normal order... the system suddenly SHUT DOWN ... no special bad noise, no special smell.. just sudden SHUT DOWN.
    From there.. impossible ever to boot back again the so far perfectly working machine (((((((((((( , always same till now :
    i switch on the power supply.. orange led appears on motherboard (ok)... i switch on the motherboard.. green led on motherboard appears (ok)... CPU fan begins (ok), video fan begins (ok) .... and... NOTHING.. total black video screen. no more even possibility to see the BIOS. :( total dead startup .. and the fans are going on eternally, blocked eternally in that inital startup with leds on too (no sudden shut down after a few seconds.. just.. nothing)... :(
    Suprem irony.. the D-bracket LED seems to 'work' now.. "of course". Just the PC no more booting at all ^. Only thing is that only green LEDs are appearing, no red ones... simply the sequence, from start and never changing :
    1. GREEN   2. GREEN
    3. GREEN   4. (---)    (not red, just nothing -?)
    If i look in manual, it means "Testing RTC (real time clock)". I don't know exactly what it means *here*, but sounds to me it is the most basic initial first BIOS checking.. and BIOS can't be reached for even that so ; BIOS fried???? :( :(
    I tried every 'standard' things recommanded usually here in older posts, for new boots recovery attempts thereafter in such 'boot errors' situations (clear cmos button pushed in every possible ways -quick, long, quick etc..-, removing little by little everything but the very minimal least energy taxing setup; keyboard, cpu, video, motherboard; 1 ddr2 nearest cpu slot.. point).. NOTHING. Worst, i tried to boot with one of those elements missing.. exact same D-Bracket lightning from start to.. eternally (123 GREEN 4-nothing). Even tried to remove the little (cmos?) KTS lithium battery for a few hours -that could work sometimes with the old already ultra-sensitive amd/nforce2 chipset bioses problems, so i tried there too-?-; same 3 green lights and fans running and nothing else happening from there.. ((
    Always the same; total dead boot as above. black screen. no possible access to even bios panel. ,(((
    So my desperate questions, now: of course, the origin is obvious here; all happened "by my fault" when i tried 'too quickly' to 'hot-plugging' replace correctly the D-BRACKET plugs *without* switching off the power supply... all shut down suddenly when i put back correctly the usb& jdb1 headers... :( ;
    - do you think there could be any possible last HOPES to recover the situation that i had missed (a well known situation in such d-bracket handling 'common' (?) connection error, a simple trick to try i had missed ??)
    - do you think i FRIED something in the process on the motherboard ?? :( :(
    - do you think it is 'only' the BIOS (fried????) ?? :( :(
    - do you think i could have fried a specifical external key component in the process (not necessarily motherboard) : ddr2 modules, cpu, video card????? :( :(
    - is my only solution is to send the motherboard to RMA (no other ways now) ???
    please, don't hesitate to give me any possible hints to try to avoid the RMA process.
    can i avoid it, right now?
    is that possible to fry an whole board just with such a D-Bracket 'hot plug switch' (on a so far perfectly working -light-  setup - no oc, little video card, etc) ???? :( :(
    That is the only C2D Intel/ddr2 motherboard i have here around. No possibility to test elements by elements for precise error checking (cpu, ddr2 modules, video card or powersupply).
    Only things i could check so far are;
    - the power supply (aerocool 620W zeroDBA) ;
    i tested it back on my old amd xp-m nforce2 setup.. always working apparently. NOT 'fried' so, apparently. but no way of course to test for exemple the special 8x8 (or 8x4) Intel ATX cpu connector on old xp-m motherboard. But power supply NOt fried at least, apparently -?
    - the video card.
    no way for me to really test the pci-e card on other motherboard around but.. i tried a very old PCI VGA card.. that one works on old setup.. and on P6N, no effect, doesn't improve the situation. So, not sure the new pci-e video card isn't fried.. but a new video card doesn't correct the dead boot problem.. (
    No way for me to test the ddr2 or CPU directly though.
    Do you think DDR2 or CPU could have been fried in the process too ???
    or just, as i fear anyway, 'simply', the motherboard BIOS fried -??? :-(
    Really, thx for any suggestions..
    if there could be an 'hidden' trick i did not try yet to try to recover the (initially working perfectly!!! (( ) setup, WITHOUT engaging the motherboard RMA process (at least 2 or 3 weeks lost here to wait the return..online store etc..)....
    please, suggest me.. ,((
    i am *really* very sad of that stupid clumsy idea to want to 'enable' the D-Bracket.. all was working great so far.. and i lost all with just that stupid idea to try an hot plug bracket reconnection without switching off the power supply it seems.. can it be possible,sigh?? all seemed so stable before that, that i.. just lost my usual cautious just 3 sec too long it seems... :-(
    Thanks in advance
    hoping post not too long too, but i tried to expose the situation as precisely as possible; first time i ever had such a problem with a motherboard/system install.. that is quiet ironical knowing it was also the best and quickest/easiest easy going new built i ever had so far too.. till then ,( .. and all came from the 'helper' d-bracket 'luxury second hand possible boot helper diagnostic tool' checking in the end too, here.. really hoping i can avoid an RMA process.. and no other hardware elements (apart the motherboard?) could have been damaged in the process ? ,(((

    hi, thx a lot for the quick answer. sorry for the length indeed (i did not know exactly how to describe the situation.. without omitting any later possibly important details).
    Alas, i already tried that many times in following interesting asnwers on similar problems in old posts here; did NOTHING. ,(
    But after your post, i tried it again, and removed for the remaining *hours* (6/8h?) the cmos battery as suggested again *too* so -pushed again the clear cmos button etc when battery out, then when in again, then replugging the powersupply etc; NOTHING better alas too. always same, no boot, black screen, no bios. ,(
    Problem always the same, to sum up, for clarity:
    power supply on => orange motherboard led is lightning up, motherboard on => green motherboard led is lightning up, cpu/video/case fans are working up as normal and.. that's all. nothing else forever. black screen. no signal. not a single chance to get again the bios setup screen.
    another detail i omitted, maybe; keyboard lights are all lightnng up too.. and stay blocked in that state too. tested with 2 different keyboards, same. to shut down the leds, fans etc, only one solution, shut down the power supply button directly, at that stage.
    right now, i test on barebone minimal system as recommanded too;
    cpu, 1 dimm (closest cpu slot), video, keyboard. all rest disconnected.
    i of course tried to reset the cmos with the 'magical red button' many times before, with power supply cable plugged out, pushed the button trying almost every possible way so far (quick, long, long sequences, short sequences etc etc)... changed NOTHING so far -is that thing working?? ,(. and right now, same after hours with cmos battery removed too. ,(
    the d-bracket leds are always (now it is correctly plugged..) :
    123 GREEN 4 (nothing)
    "Testing RTC (real time clock)"
    another 'interesting' detail is that; those leds are appearing IMMEDIATELY after the motherboard is switched on, from start (green led appearing on P6N). and it is staying as such till the end. nothing else. i tried to connect also the case speaker ; no bips, no sound signals at all too.
    I also remind the system was WORKING like a dream during 5 days *before* i had that sudden TOTAL boot problem.... AND i touched almost nothing in the bios too all along, for initial security reasons too.. (i was concentrating on the software installs anyway right now, NOT on the oc side..). The ddr2 quick little change i did was also the ONLY change i tempted to simply test quickly some setting i already saw working without problem with that P6N and that kind of ram.. and it was working without problem so far too, so.. all the time idem. And it had been perfectly working for 3 days as such untouched from there; no problems at all (those memory modules have been seen on that motherboard largely at those specs, why i did that quick test anyway.. far under their possible max -micron chips). it was even working so well i forgot to put the setting back as default after that quick ram test.. so much it was stable too (even if i had not time to do real memtest test on that one - i did for many hours with the initial automatical default settings too, to check the ram quality, was perfect for many hours, so ok too, no bad ram initially too-; was so stable for all my XP software installs operations etc.. that i forgot it thereafter, to be true..why it stayed like that till that moment (incidently).. but i preferred to mention it 'just in case' though, yes. i also did not push at all the dimm voltages in the process, it was always far inside the specs at 2.05V to be exact -usual for that ram too up to those numbers easy for it. i did not push the ram voltages either so..).
    The problem ONLY appears when i wanted to unplug the *initially* badly connected D-bracket headers so (inverted headers.. but that caused NO problems either so far too for the system stability.. only the LEDs were of course not working so far..) : i did the error to NOT switch off the power supply. :(
    *then* immediately the system shut down... and above situation appeared. ,(
    BUT all was working perfect before.. ram setting included so. ,((
    So my simple questions now too ;
    - do you know what means *exactly* the d-bracket message 'Testing RTC" (123 GREEN, 4 nothing).. initial bios problem, isn't it?? other ways to recover it now?? ,((
    - is it a WELL KNOWN PROBLEM when we try to disconnect and replug too hastily the d-bracket headers without switching off the power supply (*my* main erorr here, it seems :( :( ) ????
    ... and of course, do you think it could have *fried* another key component (cpu, ram -?? why i reminded the setting, just in case-?-, video card? .. ) with that d-bracket initial disconnection error ... ,(
    as i said, i have no secondary c2d/ddr2 motherboard here : no way to test the cpu and ddr2 modules on another motherboard to be sure too here. :( i absolutely can't know if they have been damaged or not, here.. :( :(
    any other idea for the motherboard itself though ??? ,(
    once again, thx a lot for any suggestions and precisions on that problem (is that a COMMON well known problem with the d-bracket, when we unplug and replug it without extrem care like i did -my main inattention error it seems.. mainly because all was so stable before too.. ((( - without shutting down the power supply/system FIRST ???? can it be possible 'only' that shut down all the system??? (( )
    thx in advance again +

  • P6N SLI Platinum crashes from cold boot

    Intel Core 2 Duo E6420, 2.13GHz, 1,066FSB, 4MB
    Zalman CNPS9500-AT Intel LGA775 Aero Flower Cooler
    MSI P6N SLI Platinum
    Neste ECS 6001 600 watts PSU (3.3V/24A, +5V/30A, +5VSB/3A, +12V1/18A, +12V2/18A, +12V3/18A, +12V4/18A, -12V/0.5A)
    2 x 1GB Crucial PC2-5300 Non ECC CL5
    XFX GeForce 8600GTS 256MB DDR3 PCIe (PV-T84G-UDF3)
    1 x Western Digital Caviar 160GB 7200rpm, S300, 16MB SATA (system disk)
    3 x Western Digital Caviar 500GB 7200rpm, S300, 16MB SATA (data disks)
    BIOS – 1.1 updated to 1.5, default settings (I'm not overclocking)
    Windows XP SP2 OEM
    I installed the above system last summer and have been having problems ever since.  Initially the video signal dropped after booting so I replaced the graphics card.  This didn’t work so I replaced the MOBO.  All was OK for a while then the system started crashing for no apparent reason but would usually be OK for a while after re-booting.  Then it failed to boot into Windows at all.  I checked the BIOS and noticed that the Smart Fan setting in the H/W Monitor had disabled itself somehow (I had set it to be enabled with a target temperature of 40OC).  I re-enabled the setting and was able to boot into Windows OK.  However it still crashes every time from a cold boot (the CPU fan comes on full speed for a few seconds then the computer just shuts down).  After a few re-boots it settles down and seems to be fine.
    I’m assuming the problem is something to do with CPU temperature but in the BIOS H/W monitor the system and CPU temperatures are never above 30 to 35OC.  As the system seems to be perfectly stable once it’s been re-booted a few times it doesn’t seem that the CPU is actually overheating.  I’ve tried setting the CPU target temperature higher (say to 60 OC) but still get the same cold boot crash.  Note that the MSI Dual Core Centre utility in Windows shows the same CPU and system temperatures as the BIOS monitor (although the GPU temperature is much higher at 60 OC).
    Any suggestions for solving this would be much appreciated.

    I'm not familiar with your brand of ps.  Have you tested the rails while the system is running using a digital voltage meter?

  • P6N Sli Platinum front audio panel and CPU temp voltage issues

    Hi All,
    I got my P6N Sli Platinum yesterday, build up my computer without any major issues. However I have noticed that my audio front panel does not work. It could not detect my microphone when i plug it into front auido panel, it works fine for the rear auido panel though.
    Another issues is I highly doubt the accuracy of CPU temp sensor. Msi 's software monitor reports my CPU temp is around 19-20 degree, I know that's too good to be true even I am using a water cooling system. Btw my cpu is E6600. Anyone else has the similar issues?
    The third, I notice my CPU voltage is bouncing between 1.1 to 1.24 in CPU-z. And the multiplier is changing from 6 to 9, frequency is changing from 1.6g to 2.4g. I only see this in CPU-z.  Msi 's own software reports CPU running at 2.4g though. Is this cpuz issue or something else?
    Finally, any tips to max the overclock potential of this board? I have overclocked to 3.1g but there are some crashes. Going higher the board just won't boot up. I read a review on anandtech.com says 1.22 bios is good for oc. Where can i download that? I only found 1.1 bios on official site.
    Any reply will be appreciated.
    Cheers

    Quote
    Another issues is I highly doubt the accuracy of CPU temp sensor. Msi 's software monitor reports my CPU temp is around 19-20 degree, I know that's too good to be true even I am using a water cooling system. Btw my cpu is E6600. Anyone else has the similar issues?
    C2D-CPUs have a digital internal sensor to monitor CPU Core temperatures.  Have a look at those with Core Temp ( http://www.thecoolest.zerobrains.com/CoreTemp/ ).  This Tool reads the temperature data directly from the register of your CPU. There is nothing wrong with the sensor.  It is rather the MSI tool that does not read the data it provides correctly.
    Quote
    The third, I notice my CPU voltage is bouncing between 1.1 to 1.24 in CPU-z. And the multiplier is changing from 6 to 9, frequency is changing from 1.6g to 2.4g. I only see this in CPU-z.  Msi 's own software reports CPU running at 2.4g though. Is this cpuz issue or something else?
    There is no issue.  What CPU-Z allows you to see there is the C1E-feature of your CPU at work.  When there is nothing to do your processor will automatically reduce Core Voltages and frequency to save power and keep temperatures down.  As soon as the work load increases the multiplier is set back to x9 and core voltages increase dynamically.  It is meant to be a good thing.
    I have overclocked my system a little and I like that the C1E feature is still working at this speed setting CPU frequency to 2GHz and core voltage to 1.144v when my system is idle. 
    If you have problems with this feature you can turn it off in BIOS. The option is labeled as "C1E Support" and might be hidden somewhere.  You may be able to hit "F4" to unhide it. 
    The MSI utilities are not the best tools to monitor your system.  CPU-Z, Core Temp, Everest, Speedfan, Memset, Rightmark Memory Analyzer for example do a far better job.

  • P6N SLI Platinum, audio driver update gives "No Driver was supported..."

    I have the audio driver from the CD that came with the mobo, but I wanted to update it to the new version. Currently I have R1.67 2.32, I tried to install the driver (R1.83 2.51) from http://global.msi.com.tw/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=1140 but get the message "No Driver was supported in this driver package".
    Also, I went to the Realtek site and got their even newer driver R1.84 but it asked me to remove the previous driver first, I'd rather check with the boards first to see what is going on.
    P6N SLI Platinum
    BIOS 1.4
    Realtek Audio onboard

    Could you please point me to where I can locate Live BIOS, first I hear of it. Thanks for the input btw.
    Another off topic question. Does the Dual Core Center work ok with Vista x64? Wondering just in case before I get to using it. On my first Vista install is seemed to work, 2nd format it would come up with 2 error messages and not start:
    "Error! unable to load ntuneoem.dll" and "Failed to load overclocking driver! This program must run as an administrator."
    I have ntune installed on my 2nd format (which I found out doesn't work in Vista 64 properly) but cannot uninstall it from Add/Remove. A wizard window comes up and closes in the same seconds when I click uninstall. Tried to uninstall using the MSI CD which with I loaded it, still gives an error (tried to google the error msg but the msg is extremely rare and doesn't point to the problem). Going to have to manually remove it it seems and hope I get it all.

  • P6N SLI PLATINUM CMOS BAD CHECKSUM ERROR TIME DATE

    I have the same problem. It’s driving me crazy. Here is my specs:
    MSI P6N SLI Platinum LGA 775
    Intel Core 2 Duo E6420 2.13GHz 4M shared L2 Cache
    Foxconn GeForce 7900GS 256MB 256-bit GDDR3 PCI Express x16
    Western Digital Caviar SE16 WD7500AAKS     750GB   7200 RPM
    Kingston  KHX6400D2LLK2/2G   2GB kit   PC2-6400   800MHZ
    LG DVD GSA-H50N  DVD-R 18X
    Matsu"I'm a potty mouth"a Floppy drive
    Windows XP 32-Bit
    CoolerMaster RP-500-PCAR – 500W
    +3.3V       +5V       +12V1      +12V2       -5V      -12V      +5VSB
       20A        20A        16A           16A        0.8A     0.8A        2.0A
    Sometimes the computer boots ok, and everything works great.
    Sometimes it just doesn’t boot, it just gives a blank screen. So, I press reset and the post gives the CMOS CHECKSUM BAD. F1 to setup F2 to default.
    If I go to the setup everything is just like I left, including the time. Even if I setup the bios with default configuration, the problem continues.
    Here is a list of everything I have tried
    1) Replaced the battery 2 times. I checked with a multimeter. It’s 3V allright
    2) Disconnected everything leaving only 1GB memory and the graphics card
    3) Updated the bios version several times, to make sure I did it ok. I cleared the CMOS after allright
    4) I read every post in this forum about bios and P6N SLI Platinum
    5) Already checked the D-BRACKET. It shows 4 green leds when the screen is blank
    6) Already checked fans: CPU and graphics fans works ok
    7) Already tested with memtest86+ V2.01
    8) Already upped the northbridge to 1.325V, CPU  3 notches and the memory another 3 notches.
    So anyone has any ideas, or I’ll just have to go to a computer store and swap the graphics or the PSU and try to see if the problem vanishes??? It’s gonna be tough… they don’t like to let you test the merchandise….
    PS: Thanks for all the help so far that you have been giving to TheGimp, after all, we have the same problem…

    I had the same problem after ~8months of trouble free service; it was intermittent too.  sometimes it would boot fine, others times i'd get the error message. I removed the battery to test it. it was fine. i cleared the cmos with the button while the battery was removed. i noticed that the battery holder seems not to be anchored to the board at all. I haven't confirmed this but it looks like the protruding metal clip holds it all together. i had contacted MSI support about the problem earlier. they told me to clear the cmos. i asked about the battery holder not being secure on the board, and, as in the typical support response to an unusual question, they gave me some vague, undecipherable response. So, anyway when i put the battery back in, i felt the holder kind of click into place. I haven't had any problems since.

  • P6N SLi platinum supports some yorkfields

    Just in for the P6N SLi platinum users:
    The Yorkfield Q9300 and Q9450 are supported on the mainbord with the current BIOS, 1.5 as well as the wolfdale E8190, E8200 and E8500
    The Q9450 and E8400 are still under testing.
    Look here:
    http://global.msi.com.tw/index.php?func=prodcpusupport&prod_no=1140&maincat_no=1&cat2_no=170&cat3_no=#menu
    Great news, altough the QX doesn't work, you now can still buy a new quad with nice speeds

    When I read the site today it says than none of the 45nm CPU's such as the Q9300, 9450 etc are supported. Am I misreading this? In a separate thread I mentioned my dilemma. I have the P6NSLi Plat board and need a quad core CPU to run the application I need it for (golf simulator). Any options? Also need a Geforce GTX 285 or 295 card. That should work, correct?
    Jeff

  • P6N SLI Platinum mobo with hard drive/sata crashes

    i've experienced a (now recurring) problem with my hardware over the past several months. i've come home from work twice now, once about 2 months ago, the other just today to find my computer stuck at the windows xp loading screen. if i tried to reboot the system, it would hang at that point, until i disconnected the offending drive/sata channel (i had 3 hard drives in my system, 1 150gb drive with operating system, ect, and 2 500gb drives for storage (mp3s, video, ect). i've narrowed the problem down to either the motherboard or the sata cables (i don't have spare cables to test with), as the hard drives work perfectly in an external usb enclosure. any ideas of what could be wrong?
    basic system stats:
    msi P6N SLI platinum motherboard
    intel core 2 duo E6600 2.4ghz processor
    crucial ballistix DDR2 800 (PC2 6400) 2 gb SDRAM
    EVGA GeForce 8800 GTS video card
    western digital raptor 150gb 10k rpm SATA hard drive
    western digital caviar 500gb 7200 rpm SATA hard drive
    PC Power and Cooling Silencer 750w power supply

    in brief,
    1- if you have one memory it should be in slot 1, closest to cpu, if two X 1Gb then they should be in one and three.
    2- do you know what is virtual memory if so have you made adjustment or not.
    3- you have freeze due to wrong bios setting till we get a good picture of your bios difficult to pin point the mistake, so use either a digi cam or web cam and take shoots of your bios then we can pin point the mistakes

  • Net Issues with P6N SLI Platinum

    Hello all. I am having issues getting the internet to work on my new system with the following specs:
    Mother Board = MSI NVidia nForce 650i SLI Chipset Based P6N SLI Platinum
    CPU ............ = Intel Core 2 Quad Q6600, LGA775 Pkg 2.40 GHz, 8MB L2 Cache Total, 1066 MHz FSB
    Memory ...... = Geil 2GB PC2-6400 DDR2 800 CL=5-4-4-12 1.9-2.5v (x4)
    PSU ............ = Zerodba 620W
    Video .......... = EVGA e-GeForce 8800 GTS
    Hard Drives . = Seagate Barracuda 320 GB SATA 3/GB Transfer
    OS .............. = Vista Ultimate OEM 64-Bit
    I can't get the system to recognize the router or network or even access the internet when plugged directly into the cable modem. I've power cycled plenty of times, and the other systems in my network work without fail. I've disabled UAC, windows firewall, and anything else that might be interfering on the software end. I have installed the latest drivers from the msi site, and have even installed the latest nforce drivers from NVidia's site as well. Any suggestions would be appreciated!

    Quote from: Maesus on 29-September-07, 09:00:00
    1. make sure you enable LAN in the BIOS
    2. make sure the LAN driver is properly installed in the BIOS
    3. make sure your cable modem can detect your LAN - did you implement MAC address filtering? set the LAN speed to be detectable by the cable modem, ie 10Mbps?
    1. The onboard LAN controller is enabled in BIOS
    2. Not sure how to go about doing this exactly.
    3. MAC address filtering is only enabled for wireless connections and it seems that the router is "seeing" the system. I have connected directly to the modem as well to no avail. I'm not sure how to set the LAN speed to be detectable to the cable modem.
    "Check your network speed and try not to use Auto negotiation. Try setting it to 100Mbps full duplex, or 10Mbps full and see how it goes."
    Where would I be able to adjust these settings exactly? Thanks for the help so far!

  • P6N sli platinum not working

    Hi all,
    I have a problem, i bought my self a P6N sli platinum, so i installed it but it doesnt work:(
    I am not getting any vga signal, i know i installed it alright but it isnt working.
    I think its my cpu it might not be working with this P6N, i hope anyone can confirm this, because when i check the CPU support at the MSI site it says its compatible.
    I got a : Pentium 4,  3.2 mhz 640  2m/800fsb
    I hope i get an answer because i have to return the P6N in 5 days, if it isnt working.
    thx

    Quote from: Maesus on 03-June-07, 15:44:15
    Core 2 Duo will perform WAY BETTER than Pentium 4. It is 100% compatible to Pentium 4. Do you know what Pentium 4 model number you have?
    Pentium 4,  3.2 mhz
    640  <--this is the model number http://www.intel.com/products/processor_number/chart/pentium4.htm 
    2m/800fsb
    O yes and non of the lights on the D-Bracket go on, the green light and orange light on the P6N are on.

Maybe you are looking for