Core Audio Initialization freezes...please help

I just upgraded from Tiger to Leopard and installed a fresh copy of logic 7.2 in my hard drive. Now when I try launching it...right when that first splash screen shows up it gets to Coreaudio Initializing...and it gets stuck and it becomes unresponsive. When I launch holding control and disable the coreaudio then it launches fine but ...I need to be able to use Coreaudio. For information sake i have a MOTU 828...thanks so much in advance for helping

Once Logic has launched, disable all your plug-ins & Audio Instruments (or anything with a driver). You should be able to launch normally, & if so try re-installing everything one at a time until you hit the problem again. When this happens, the last item installed will be the culprit, so remove that again. Check on the manufacturer's website to see if there are any known bugs, & if appropriate download the latest compatible version.
It is very common for badly-written plug-ins to be problematic after an upgrade, until they have been upgraded themselves.

Similar Messages

Everytime i eject my ipod and reconnect it all my music is gone. and sometimes while i try adding music to it. itunes completely freezes. please help. and sometimes when i plug it back into my PC i have to rename my ipod and such

Everytime i eject my ipod and reconnect it all my music is gone. and sometimes while i try adding music to it. itunes completely freezes. please help. and sometimes when i plug it back into my PC i have to rename my ipod and such

Antivirus has a tendency to freeze iTunes sync Operation with iPod Classic, causing a timeout, which corrupt your iPod filesystem, so when iTunes can't read the iPod, it is pointing to this problem. Other causes is when your iPod hardisk is dying, or your battery is dying causing hardisk crashes.
My suggestion.
Connect your iPod to the PC and run chkdsk, to fix any iPod diskerror, then disconnect it, after chkdsk complete.
Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
Stop the Antivirus program
Connect your Ipod to the PC
When iTunes Open up, Restore your iPod please, this is for iTunes to map correctly, to fix the corrupted filesystem.
When Restore complete, eject the iPod and reconnect again.
Sync your ipod, preferably manually Manage in small batches and disconnect after every batch, to check that all is well, since you got such a huge library.
When all sync is complete, and iPod disconnected, start back your Antivirus and connect back the Internet.
If this doesn't resolve your problem, then let me know.
Good Luck!

Iv just introduced midi into my studio im running logic9 and have brought Midiman Aniversary 4in 4 out to my set up midi is running well but i cannot seem to mute or solo midi regions an isolate them from the audio can someone please help me Murray.

Iv just introduced midi into my studio im running logic9 and have brought Midiman Aniversary 4in 4 out to my set up midi is running well but i cannot seem to mute or solo midi regions an isolate them from the audio can someone please help me Murray.

Hi Charlotte,
You don't say what your version of Windows you have. Assuming XP, go to Start | Run, type DXDIAG and click OK. Click the Sound tab and run the tests to eliminate a hardware problem first of all. If you don't hear anything, check your cables first of all. Also make sure "Mute" isn't checkmarked in your sound setup. You'll find that in Windows Control Panel.
Which browser do you use? If you have Firefox 4, sign up to the HTML5 trial @ http://www.youtube.com/html5
HTML5 is the latest video standard and doesn't require Flash player. Google is in the process of converting all its files to work with the new format. It may solve you problem. If you don't have Firefox 4, you can get it from here: http://www.mozilla.com/en-US/firefox/fx/
IE8 doesn't support HTML5.
To clean out your temp files, go to Start | Run, type: CLEANMGR and click OK. Click OK again to start the utility. Tick all the boxes except "Compress old files" because the latter takes too long, and then click OK. You can run this utility any time you wish by the way.
The above steps will hopefully fix your problem. If not, post here again please.

My CS6 photoshop started showing cannot perform function programming error then it started freezing please help?

My CS6 photoshop started showing {cannot perform function programming error}
then it started freezing please help?

Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

Crashing at core audio initialization

Heeeeelp
I un-installed Melodyne Cre8 2.6 using their uninstall function. It must have taken out something important because now Logic crashes on start up at the core audio initialization. Live also crashes at start up. Everything else is fine, audio, other programs...just Logic and Live.
BTW I've bought Melodyne Cre8 to use the AU Melodyne bridge function. Nothing but a big headache.

Once Logic has launched, disable all your plug-ins & Audio Instruments (or anything with a driver). You should be able to launch normally, & if so try re-installing everything one at a time until you hit the problem again. When this happens, the last item installed will be the culprit, so remove that again. Check on the manufacturer's website to see if there are any known bugs, & if appropriate download the latest compatible version.
It is very common for badly-written plug-ins to be problematic after an upgrade, until they have been upgraded themselves.

I opened up a radio site that i used to listen to on my old computer, but when i opened the site up, it said it needed a plugin, then it couldn't find the plugin and said unknown plugin (audio/x-mpegurl) please help!

i opened up a radio site that i used to listen to on my old computer, but when i opened the site up, it said it needed a plugin, then it couldn't find the plugin and said unknown plugin (audio/x-mpegurl) please help!

ChrisJ4203,
Thank you for the help. Every app on my phone was downloaded using my old I-tunes ID. I just hope that they will re-download under my new ID because I still can't change it on my phone. In order to change to the new ID it says I have to sign out from the old ID and change to the new one. My problem is that I don't remember my password to be able to sign out from my old ID. Then the phone says it can change my password through e-mail and I agree but I never get an e-mail at my old address or the new one.
BHuyett

I installed windows 7 on my macbook but there is no audio at all. please help!

i installed windows 7 on my macbook but there is no audio at all. please help!

Did you download and install the Windows Support software in accordance with the Bootcamp Installation Instructions? http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

IMovie Full Quality Export Video Stops As Audio Continues. PLEASE HELP

Im making a video of my camping trip, and I tried to export it using the Expert Settings. When I watched it, it stopped about 1.5 minutes in. The video freezes but the audio continues. I really need this video up soon! If you've experienced this and know how to fix it, please help! I used a Canon SD1000 to record, I have a macbook core duo with 1 GB memory, 60 Gig Hard Drive, and iMovie HD 6.0.3.
Thanks a bunch!
-Chris

Hi OK
Then there is sufficient space
And no external hard disk that interferes.
Then I would try to delete the iMovie pref file
iMovie
-->/Users/YourName**/Library/Preferences/com.apple.iMovie.plist
and
-->/Users/YourName**/Library/Preferences/com.apple.iMovie3.plist
and see if a new export will work
(to make this easy one might just start a new account (log-in) and use this and re-try)
- other thoughts:
• versions: Mac OS X.4.9 and iMovie 6.0.3 AND QT ????? 7.1.6 ?
• Running (Apple Disk Util tool): Repair permissions and Repair hard disk
might help (second one needs start from CD/DVD or external hard disk)
Yours Bengt W

Lock-Ups and Freezes PLEASE HELP

Hello everyone..
I come here to see if anyone can help me... Ive done it all and nothing is working.
I just recently started having problems with my computer, im not sure why this happend but ill try to explain everything as best as I can.
The problem started a few days ago while I was playing SWG's. I was playing and all of a sudden my machine froze, the screen locked-up and then after about 2 min the entire system restarted. I then logged back into my windows and after a while a system froze and restarted yet again. I though it was a SWGs issue but then the computer would freeze while browsing the net and doing other tasks.
I have formated my machine, re-installed my drivers, and re-installed the hardward. Nothing has worked.
My computer specs are
300watt PSU Enermax True Power
MSI K7n2 nforce2 8xagp mobo
athon 1700xp
512mb of Kingmax DDR 2700
SB audigy x-gamer sound card
MSI geforce4 ti 4200 8xAGP graphics card
Hope thats enough..
One last thing... When my computer restarts after the problem i get a message asking me to report the problem to microsoft... i located the error file and this is what was writen in it....
// Watchdog Event Log File
LogType: Watchdog
Created: 2003-07-19 01:30:24
TimeZone: 300 - Eastern Standard Time
WindowsVersion: XP
EventType: 0xEA - Thread Stuck in Device Driver
// The driver for the display device got stuck in an infinite loop. This
// usually indicates a problem with the device itself or with the device
// driver programming the hardware incorrectly. Please check with your
// display device vendor for any driver updates.
ShutdownCount: 5
Shutdown: 0
EventCount: 5
BreakCount: 5
BugcheckTriggered: 1
DebuggerNotPresent: 1
DriverName: nv4_disp
EventFlag: 1
DeviceClass: Display
DeviceDescription: MSI MS-StarForce GeForce4 Ti 4200 with 8X (NVIDIA GeForce4 Ti 4200 with AGP8X)
HardwareID: PCI\VEN_10DE&DEV_0281&SUBSYS_89431462&REV_A1
Manufacturer: NVIDIA
DriverFixedFileInfo: FEEF04BD 00010000 0006000D 000A0C1C 0006000D 000A0C1C 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
DriverCompanyName: NVIDIA Corporation
DriverFileDescription: NVIDIA Compatible Windows 2000 Display driver, Version 31.00
DriverFileVersion: 6.13.10.3100
DriverInternalName: nv_disp.dll
DriverLegalCopyright: (c) NVIDIA Corporation. All rights reserved.
DriverOriginalFilename: nv_disp.dll
DriverProductName: NVIDIA Compatible Windows 2000 Display driver, Version 31.00
DriverProductVersion: 6.13.10.3100
Hope this helps, i dont understand what it means so maybe one of you might...
Please help me on this... Ive tried everything i can...
Thanks in advance

If what you are saying, and I am reading correctly:
The machine and game was working just peachy and all of a sudden the problem manifested itself?
Did you do ANYTHING to change your system prior to this happening to possibly have an effect?
the fast that you said you have re-loaded the OS and removed and re-installed the hardware with the same result tells me that there may be some sort of hardware failure and this could get difficult to troubleshoot.
First things first, try a memory testing software like memtest86 to see if you get any errors.
http://www.memtest86.com/

Computer freezes -- PLEASE HELP

Each time a new song starts on my iTunes, about 10 seconds into the song my memory usage for iTunes will shoot up from 53,000K to 85,000K and will cause everything I am doing on my computer to freeze up for about 5-10 seconds. Like I said, this happens for each successive song. I have a 13,000+ song library and did not have this problem with iTunes 4.9 -- I recently updated to 5.0.1 and started experiencing this. So, I tried uninstalling 5.0.1 and reinstalling 4.9, but the same problem was now happening there as well. This is NOT a problem with my hardware, it is more than sufficient to support this usage, and happens even when iTunes is the only program running on the computer. PLEASE HELP, it is very annoying to have to stop what I'm doing and wait for 5 seconds each time a new song starts.

Boot from your original Tiger cd and run Disk Utility Repair Disk from there - it can repair directory problems which can't be fixed from normal Disk Utility.
If that doesn't work, an archive and reinstall of Tiger might be best - it's pretty simple and can save weeks of trying to track down and fix an obscure problem. Just make sure you thoroughly backup first. Check Apple's website for instructions http://docs.info.apple.com/article.html?artnum=107120. Disconnect all peripherals while you reinstall.
Once Tiger's reinstalled, download the combo update from here http://www.apple.com/support/downloads/ (Note - don't use Software update for this). Re-attach peripherals one-by-one to see if anything is still upsetting Tiger.
I would then recommend you install third party software Macaroni, http://www.atomicbird.com/ to automate the necessary admin tasks needed to keep OSX in tip-top shape.
2GHz dual G5, 23" panel Mac OS X (10.4.7)

PLEASE HELP! my iPod got stolen but i got it back . and now it can be off i try to charge it and it would go to the silver apple and it would have a loading circle and it freezes |: PLEASE HELP

PLEASE HELP! my iPod got stolen but i got it back . and now it can be off i try to charge it and it would go to the silver apple and it would have a loading circle and it freezes |: PLEASE HELP

Hi,
This Link contains the Steps on How to Restore your Device...
http://support.apple.com/kb/HT1414
Cheers,
More Support Here:
http://www.apple.com/support/ipod/

Imac slow and Freezes PLEASE HELP!

PLEASE HELP!!!
Hello i have and imac G5 i bought it in about june of 2005...
It was running very slow and always freezing and then i upgraded the RAM to 1gb
and it started working much better. then i upgraded to OS Leopard andalso pro tools LE 7.4
and since then has been performing slow and freezing all the time. ai recently added another gig of RAM just to see if that was the problem , but it seems to be working just as slow. Does anybody know what it might be. Its a 1.6 GHZ power PC G5 and has a 80GB HD and have about 20 GB free so i dont think thats it. Please let me know if any of you have had this problem or know how to fix it thanks

Except for the keyboard & mouse, disconnect all devices from your computer.
Repair your disk from your System DVD.
Repairing permissions from the Tiger or Leopard DVD
Boot up from your Tiger or Leopard Install DVD while holding down the "c" key.
Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
If Disk First aid is able to complete the repair now click on the "Repair permissions" button.
Once this process has been completed restart your computer.
===============
Get a larger HD
===============
Use Software Update to update your OS to OS 10.5.6.
Afterwards, repair permissions & restart your computer.
Your system info confirms you are still using an outdated version - OS 10.5.4.

Imac usb keyboard/mouse freezes - please help!

i have a 700 mhz g4 flat-panel, 768 RAM, 40 GB disk, running OS 10.4.5.
the keyboard and mouse keep freezing up. sometimes one, sometimes the other. if i unplug the offending one and plug it back it, it works fine. i've tried using different USB ports, and re-setting the PRAM, but after a few minutes of use, the problem comes back.
please help!

Thanks. I was just going to post that I had more information. Luckily, it seems to jive with what you suspect.
This crash was different. Instead of a "freeze" it panicked. In the USB driver, naturally.
It was throwing these log entries beforehand:
Mar 1 12:45:06 UKELELE kernel[0]: USBF: 406246.406 [0x23a6600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of hub @ location: 0x18000000)
Mar 1 12:50:05 UKELELE kernel[0]: USBF: 406544.669 [0x23a6600] The IOUSBFamily has successfully enumerated the device. Mar 1 12:50:09 UKELELE kernel[0]: USBF: 406548.296 IOUSBHIDDriver[0x3091500]::start - super::start returned false!
Mar 1 12:50:09 UKELELE kernel[0]: USBF: 406548.296 IOUSBHIDDriver[0x3091500]::start - aborting startup
Mar 1 12:50:09 UKELELE kernel[0]: USBF: 406548.306 USB-PS/2 Optical Mouse[0x368a600]: error setting feature (1). err=0xe00002ed
Mar 1 12:50:09 UKELELE kernel[0]: USBF: 406548.610 USB-PS/2 Optical Mouse[0x368a600]: error setting feature (1). err=0xe00002ed
So I was going to swap out the mouse, anyway. If that doesn't stop it, I'll change USB ports.
Thanks so much for the response.

On my THIRD iPod Touch aka " Mr. Freeze" Please Help!!!

I got my first 16GB iPod touch back in November and it was GREAT! I never had any function problems at all. It always tuned on , turned off , charged , synced , slept , and played just as it was supposed to. Then after about 2 months the left channel audio started cutting out . So I made a service request and sent it off to AppleCare where they quickly identified the problem and replaced my iPod with a different one.
Now the first night I had this replacement iPod it froze up on me and would not do anything until I held the home and Power button for 5 seconds until it restarts. This became a daily ritual. EVERYDAY I would go to use this iPod and it would be frozen , you could look at the screen under direct light and see that the screen was not completely off , you could not see pictures or backgrounds just different shades of black blocks and bars accross the screen vertically. And while it is in the frozen state is drains the battery VERY quickly. I can finish using the iPod at the end the end of the day with at least 75% battery left , turn it off and go home and check it 2 hours later and it will be frozen and when I get it to restart the battery is in the RED. When it is in this frozen state connecting it to the computer does nothing , the computer will not see it at all as long as it is frozen. It tried the 5 R's to every extent with no positive results.
So I got frusterated and made another service request and sent it off to AppleCare to be "Serviced". They said their technicians could find nothing wrong with it , that it met all of Apples quality control guidelines and function as expected by Apple , so they sent is back to me. It arrived to me FROZEN again!
So I tried to use it as was for about another month and decided you know what my first touch NEVER did anything like this in the 2 months I had it so I know it doesn't have to be this way. So I made another service request for this same (my 2nd) touch. Only this time I sent copies of a letter explaining every detail of the problems , and insisting that they either repair/replace or refund my money. Funny enough this time they iddentified and issue with it and replaced it with what is now my 3rd iPod touch.
Now this 3rd Touch does not do what the second one does. I does something NEW. it keeps going into RECOVERY mode , whatever the **** that is , so I will go to use it and it will not function nor turn on and when I connect it to my computer it says iTunes has detected an iPod in recovery mode and it must be restored before it can be used! So this morning I got up for work ejected the touch from my PC , it had been charging , slid the slider to unlock it and verified it was charged and ready to go abnd then turned the screen off and drove to work. Fifteen minutes later I go to turn the music on and it is stuck in recovery mode.Now I have really had it!!! If it's not annoying enough that this has to keep happening all my music is on my PC at home. So I plug it in to my PC at work and its says it has detected an iPod in recovery mode and must be restored, so I can restore it but then there is no Music on it until I can get back home to resync it with my home PC. So for the entire rest of the day I have and iPod that is no longer frozen , but also has NO content on it!This happens once maybe twice a week , not near as frequent as the last replacement Touch they sent me and it seems to be a different issue also , but still a problem just the same.
I don't understand why this keeps happening?!?! All the content is the same accross all 3 Touch's I have had. My usage remains the same for all 3. Nothing has changed accept the Firmware version between the three. The first touch was 1.1.2 the second was 1.1.3 and the third is 1.1.4.
And of course I never had any problems until I purchased the January Software Upgrade POS. Is it possible that the JSU is causing all of this? Is there a way to remove the JSU off of this Touch or would I have to revert back to 1.1.2 Firmare? And if so can it be done? If I have to do that and it is indeed the problem can I obtain a refund for the JSU because it CRIPPLES the iPod??
PLEASE help , any advice is greatly appeciated! Thanks
-Cody

Well, I am VERY particular about keeping my electronics MINT. I have never not used a protective case and I have to say it is almost heart breaking to imagine the scratchs my Touch will have on that shiny back after just one day without a case...........but I am desperate. I must say I really do love my Touch. It is my 15th Media player and beyond all comparison the best Media Player I have ever owned and I am willing to do whatever is necessary to remedy this situation and be able to use my Touch as intended once again.
What gripes me the most is that I paid premium price for this iPod Touch and it has virtually no Tech support. It baffles me. I had ONE tech support phone call available within 90 days and I used it on the first Touch so now I can't phone tech support , you cannot e-mail tech support , my only option is to place a service request and send it to AppleCare and you can't give a decent description of the problem even then because you are limited to 200 characters and I am damned tired of sending it back and forth. Is it really so hard to offer decent Tech support for these $400 and $500 Media Players? Dozens of other manufactures manage to do it so why can't Apple? They've got an AMAZING product , why not give it AMAZING support? Thats all I'm saying.
Message was edited by: GrandMasterB

Problem with my ipods audio!! Please help!

When I play any audio on my ipod, it usually only comes through one earbud. Even if the headphones are brand new, and in perfect working order. My brother has a perfect working set of headphones, and when he uses them with his ipod, they work perfectly. Then when I plug them into my ipod, the sound only comes through 1 earbud (the right side). Then if I lightly pinch to the upper right of the click wheel (right under the screen), it will start to work. But I sometimes have to pinch in different places. What could be the problem???? Do I have to send it in to be repaired? Please help!!!

Try a 3rd party site and you can either have it fixed or buy the part and fix it yourself:
http://www.iresq.com
http://www.ipodmods.com
or Google for more.

Core Audio Initialization freezes...please help

Similar Messages

Maybe you are looking for