Core Audio: Selected Driver not found. (-10202) error message and speakers don't work

Apple just replaced my hard drive and now I'm noticing that I have no sound coming out of my internal speakers or earphone jack.  When I try to use garage band I get the following error message:
Core Audio:
Selected Driver not found (-10202)
I read their article on the subject; I go to system preferences, sound then output devices where I'm supposed to select my device except there are none listed.  I tried to fix the problem by reinstalling the operating system using the CD's that came with the MacBook Air but that didn't work either.
Here's the other problem, when I download the software update the update never loads.  The status bar just sits there even when I let my pc alone over night. 
Any suggestions??
FYI, i can't easily walk into a mac store for assistance.. gotta catch a plane to a different island.

Update your Apogee and Symphony drivers to Mountain Lion versions...
But the bigger question is.. How did you install Mountain Lion on a G5?

Similar Messages

  • After downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed  and then a second message the " select driver not found(-10202). my interface is a apogee duet

    after downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed  and then a second message the " select driver not found(-10202). my interface is a apogee duet. Can anyone provide a solution to this problem. Thanks

    YES!!! YES!!! YES!!!
    I got it!!! Yes!!!
    Guys, I've solved my problem about that error -10202 (Selected driver not found).
    I have installed in my Mac Pro (OS X 10.5.8) a document with an extension ".rsrc" to correct the position of the accents in my keyboard, like acute accent, tilde and circumflex.
    That file is called "U.S. - International.rsrc" and it's stored in the following path:
    "Macintosh HD/Library/Keyboard Layouts"
    So, when it's properly installed, I can choose 2 country flags on the right side of the menu bar (U.S. - International and Brazilian).
    That's the clue!
    When I pick up "U.S. - International", my keyboard works fine with the accents, >>>BUT<<< Logic Pro 9 doesn't recognize my audio driver; and when I pick up "Brazilian", my keyboard doesn't work with the accents exactly as it shows me on each key, BUT Logic Pro 9 DOES recognize my audio driver.
    So, when I want to write anything out, I will pick up the "US - International" and when I want to work on the Logic Pro 9, I will pick up "Brazilian".
    I hope I can help all of you.
    Regards,
    Renato Veiga.

  • Getting error code 2 and also "selected driver not found (-10202)" when trying to change output/input in garage band. Driver issue?

    Garage band newbie here...Been trying to record using PreSonus as my interface..having nothing but problems when I try to bring up
    garageband. Multible restarts did help at first but now I can get no sound and cant seem to load the drivers at all in output/input...any help with this problem?

    YES!!! YES!!! YES!!!
    I got it!!! Yes!!!
    Guys, I've solved my problem about that error -10202 (Selected driver not found).
    I have installed in my Mac Pro (OS X 10.5.8) a document with an extension ".rsrc" to correct the position of the accents in my keyboard, like acute accent, tilde and circumflex.
    That file is called "U.S. - International.rsrc" and it's stored in the following path:
    "Macintosh HD/Library/Keyboard Layouts"
    So, when it's properly installed, I can choose 2 country flags on the right side of the menu bar (U.S. - International and Brazilian).
    That's the clue!
    When I pick up "U.S. - International", my keyboard works fine with the accents, >>>BUT<<< Logic Pro 9 doesn't recognize my audio driver; and when I pick up "Brazilian", my keyboard doesn't work with the accents exactly as it shows me on each key, BUT Logic Pro 9 DOES recognize my audio driver.
    So, when I want to write anything out, I will pick up the "US - International" and when I want to work on the Logic Pro 9, I will pick up "Brazilian".
    I hope I can help all of you.
    Regards,
    Renato Veiga.

  • I am not able to open your answer for some reason my computer is not opening it in Explorer, it's not responding and I keep getting error messages and I don't know how to open it in another browser when Explorer experiencing issues. Heather

    I am not able to open your answer for some reason my computer is not opening it in Explorer, it’s not responding and I keep getting error messages and I don’t know how to open it in another browser when Explorer experiencing issues.
    Heather

    If you  have IE version 10 go to TOOLS and change the option to use Compatibility View

  • Windows 7 - Apple Application Support was not found.  Error Message

    Hello Folks,
    i keep getting the following message, despite the fact that i have uninstalled Itunes and then installed it again a few times.
    "Apple Application Support was not found.  Please uninstall, and install again.  Error 2 (Windows Error 2).
    Can anyone suggest any help?
    I have a Windows 7, new Dell Latitude machine.
    THank you,

    "Apple Application Support was not found.  Please uninstall, and install again.  Error 2 (Windows Error 2).
    Is Apple Application Support currently showing as installed in your Uninstall a program control panel?
    If not, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • ITunes will not open (no error message and not running Norton 2005)

    I have recently upgraded to iTunes 7 and I now cannot get it to open after clicking on the icon. The iTunes.exe process comes up in the task manager briefly then disappears. There is NO accompanying error message and I am NOT running Norton Antivirus 2005. I have already tried reinstalling the standalone version of quicktime and I have used msconfig so that I essentially have only the necessary iTunes/quicktime processes running (no antivirus/antispyware/anti-popup software is running in the background). I have Windows 2000 and I have never had a problem with iTunes until now. Somebody please help me out here.

    wapierce,
    It looks like we have covered all the bases here. Unfortunatly it looks like The computer cannot run iTunes or the OS has an issue that may require a reeinstall.
    Lets verify the Hardware and OS one more time. Click Start> right click My Computer> Properties(you can also open My Computer then click view system information on the left side of the window.) What does the processor and Memory say here? Also what is it saying aout Windows.
    Make sure there are no upadtes available for the computer.
    When you installed iTunes did you make any registry changes? It sounds like the next step would be doing a restore or re-install of Windows on the computer.
    Jason

  • Displaying "ORA-20502: Automation context not found." error message

    Hi all,
    I am implementing functionality in OSM 7 to read jms message sent by external system.I am setting default jmscorrelationid as "test" in order to identify message.I have implemented an automated task as xslt automator and having external event receiver.but when i get the message on the queue from external system weblogic console start giving error message as -
    "ORA-20502: Automation context not found.
    Can you please tell me what could be the reason for this??

    The trick is that OSM needs to initiate the communication. It is depicted in the diagrams in OSM Developer's Guide in the automation plugin section (however not very clear - in my opinion).
    My experience is that you need to correlate messages to OSM by using the (JMS)correlation id sent by the initiating message from OSM. If this can't be sent directly to the external system, a component (e.g. JMS queue + MDB) needs to be placed between the systems and handle the correlation between the messages from the external systems and the OSM "request for reply".

  • TS1424 Why won't itunes connect? When I try and sign into iTunes it gets hung and never connects. I do not receive any error messages and I have confirmed my user ID and pswd to be correct. I am using Windows 7

    Hello PC users! I have installed iTunes on my laptop confirmed correct installation by Apple tech and iTunes will not connect. Pswd and user I D have been confirmed, no error messages it just says connecting to iTunes store and it never does. Tried uninstalling and reinstalling using Apple downloads. Still nothing? any clues?

    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • My iTunes will not open...no error message and I don't have Norton 2005!

    I've upgraded my iTunes to 6.03 on my PowerMacG4, with MacOSX10.3.9. After a few times using iTunes 6.0.3, my iTunes stopped opening when I clicked on its icon in the dock. It doesn't show up in the top menu either. No error message shows up and I've read from other forums that it has to do with Norton 2005, but I don't have Norton. How can I fix this????? Please help.

    hi alshie!
    if you don't have NIS 2005, and you're getting no error messages whatsoever, let's check up on this possibility:
    iTunes for Windows doesn't open after upgrading
    but the other thing we'd better check on quickly is infestation of the PC by Qoologic adware. that's typically different from the NIS 2005 and configuration-file thingies in that people usually see a "flash" of the itunes license screen before everything goes away (and they see similar behavior when they try to launch their QuickTime). but that symptom isn't universal in these cases.
    what has been fixing the Qoologic for most people has been the free trial version of Ewido:
    http://www.ewido.net/en/download/
    keep us posted. if no joy with these, we'll start working through the rarer possibilities.
    love, b

  • I tried to download the Firefox Add on Web Developer and I got an error message and I don't know how to proceed.

    Hi
    I have Firefox 3.0.1 and then it also says Mozilla 5.0. So first I don't even know if this is the right product but I didn't know what else to do.
    I'm trying to I tried to download the Firefox Add on Web Developer and I got an error message of: Firefox could not install the file at http://releases.mozilla.org/pub/mozilla.org/addons/60/web_developer-1.1.9-fx+sm.xpi because: Unexpected installation error Review the Error Console log for more details. -203
    I've tried it like 3-4 times. I don't know what I'm doing wrong.
    Any suggestions???
    THANK YOU :-)
    Erin

    You should update to the latest Firefox 3.6.x version:
    *http://www.mozilla.com/firefox/all.html
    *http://www.mozilla.com/firefox/all-older.html
    See:
    *http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox

  • Realtek HD Audio Driver Not Completing install - error message

    Could I just say first that I am far from being technical minded so please allow for possible lapses in info.
    Just done another complete reinstall of Win XP - formatted drive etc.
    However unlike on previous instances the Realtek HD Audio driver has not installed.
    I have downloaded the latest version - 5.10.0.5605 but this too at  very near the end of installation gives the message Install Realtek HD Audio Driver Failure [Error Code 0xE0000227]
    I have the G33M Series MS-7357(v1.X) Mainboard with Intel Core 2 Duo
    Hope this is enough info to anyone to offer advice.
    Thanks
    John

    https://forum-en.msi.com/index.php?topic=115476.0

  • Hard drive not found (3F0) error

    I have a G42-415DX notebook that I bought around a year ago.  It's been a solid day-to-day computer up until now.  It froze a few days ago, and when I tried to start it back up, it got to the HP splash screen (prompts you to hit 'Esc' for system settings) and started beeping.  It stayed this way (beeping from the motherboard, not the speakers) for a minute until I shut it down.  When I tried to start it back up, I got nothing but the system diagnostics screen.  No option to load the BIOS or any of that, it "boots" strait to system diagnostics now.  I ran all the diagnostics and the memory checked 100% fine, but the computer says there is no hard drive installed.  It gave me a "3F0" error code (no bootable device installed).  I've tried absolutely everything I can think of.  I took the hard drive out and checked the connectors for corrosion or burns and everything looked clean.  I removed re-seated the drive several times but it didn't fix anything.  I tried swapping a good hard drive from a different laptop, also with windows 7 installed, into the G42 with the same result.  Also worth mentioning, the other laptop wouldn't boot to windows with the G42's hard drive either.  I popped in my Ubuntu DVD and ran the OS live from the disk to see if the built-in disk utility could see the drive and it does not.  The DVD drive itself shows up under the host SATA controller, but no hard drive.  Also, there's a very small (maybe 1 inch long) cable on this laptop that connects the hard drive to the motherboard.  1 end connects via normal SATA ports but the other seems specific to this laptop.  Maybe this little cable is the issue, or the connection on the motherboard side?  Both connectors on that end also appeared to be clean, nothing loose or obviously broken.
    The G42 didn't come with any windows disks b/c there's a recovery partition pre-loaded on the drive (which I can't access).  
    Is this a hardware issue or do I need to flash/update my BIOS?  I have a lot of very important personal information and family photos on the G42 so if anyone knows a way to fix this problem outside of a new hard drive or laptop, or has any ideas for further troubleshooting, I'm all ears.

    Hi,
     The failure ID you provided indicates that your Hard Drive has Failed & needs to be replaced.
    If your notebook is still under warranty, contact HP and arrange to have the drive replaced.
    If you are out of warranty and would like a guide on replacing the Hard Drive yourself, please let me know.
    Let us know how it goes!
    *Although I am an HP employee, I am speaking for myself and not for HP.
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • OT: Thunderbolt drive not ejected properly error message

    Hello all: I've got a MBPro 17 and a less than a month old LaCie 2T Rugged Thunderbolt/USB3.0 drive that I've started using. The drive randomly ejects itself and of course at the worst times. It could either be in use or nothing going and it just ejects.
    I've replaced the drive once at the Apple Store, but I think it's the OSX or ???  Any ideas?
    Thanks,
    Tolbert

    this may be an issue with my USB hub...its USB 3.0 with two "extra" powered all the time....one HD is just a normal non powred travel drive (seagate) and had a FIT with the powered port just now.  I have moved ALL external drives to the "normal" spots on the hub and see if its just the hub acting up

  • Audio output changed to 'Digital Out' and speakers don't work! Please help!

    I'm not exactly sure what's happened, but after starting up my macbook pro, my speakers/audio haven't worked.
    The volume control in the menu bar is inactive (looks light grey) and in the Sound menu, I have no option for output devices except for 'Digital Out' - there is no other option for 'external speakers' (as per usual) or anything!
    I can plug earphones in, and sound comes out fine... I don't know what may have happened, but I'm really worried - I use my MBP for home & work; I need my speakers to work!!
    If anyone can offer any advice, I'd be really grateful. Thank you in advance.

    Talked to Tech Support about this when my machine locked up in this same fashion. There's a little "door" inside the headphone jack that can get stuck in the open position and keep the audio from switching back to the internal speakers / stuck in the digital (optical) output position...
    The solution: the iPick... It's a toothpick, but if you use it to poke around inside the headphone jack until the little door gets unstuck, it becomes an iPick, and a box of them are very expensive, but they come in lovely colors and are very intuitive to use...
    I'm not kidding... Stick a toothpick (or other non-conductive small stick) in the headphone jack and joog it around until it releases the little door...

  • HELP!  My Webpage started giving me an error message and I don't know why!

    Hi! I'm brand new to using Mac's and iWeb and I'm trying to set up a website for my business. I had completed a welcome page and published earlier today. A friend of mine was able to go to the URL I gave her and view my page without any problems. Now, though, she and I get the following message . . .
    "We're sorry but we can't find the iWeb page you've requested. It's possible that:
    · The address was entered incorrectly. Check your spelling and try again.
    · The .Mac member of this name has either created a page and removed it or has never published an iWeb site.
    · There is no .Mac member of this name. If you'd like this member name for yourself, sign up for a .Mac account right now and have your own iWeb site in minutes."
    When I log in to my .mac account, it shows a welcome page as being present, but when I click on that I get this same message. Does anyone have any idea of what is going on???? If so, would you mind helping me out with this? Please keep in mind I'm new to this software when you explain things and don't be afraid to talk to me like I've got no clue what I'm doing. Thanks a bunch!
    Soulhorse Equine
    Mac Book   Mac OS X (10.4.6)  
    Mac Book   Mac OS X (10.4.6)  

    Anyway,
    we're typing in the URL correctly,
    That's what they all say:-)
    Seriously, it happens all the time that people think they are doing that right when they are not. Just as people come here all the time complaining that their site is not updating when in fact it is just that they need to clear their browser cache.
    Here are some different url's you could try, making sure each time that they are exactly correct, including capitalization.
    http://web.mac.com/username
    http://web.mac.com/username/iWeb
    http://web.mac.com/username/iWeb/sitename
    where sitename is the exact name of the site inside the iWeb app.
    http://web.mac.com/username/iWeb/sitename/pagename.html
    where pagename is the exact name of the topmost page inside the iWeb app.

Maybe you are looking for