Core Center 1.7.3.0

For some reason it will not save my oc settings after i restart.. any ideas if this is a problem with newer version?

I don't know about your problem, I've just noticed this: Compared to my previous version (1.6.8 I think) this latest version seems to report lower temperatures for the CPU. Which is nice, because it has previously reported around 60 C when I'm running Climateprediction.net (which uses the CPU 100 % 24/7). Now it's telling me the CPU is only 56 C (same conditions).

Similar Messages

  • Dual Core Center working in Vista but not XP on a dual boot system?

    Hi All.
    My system specs are:
    Dual Boot Windows XP Pro SP2 and Windows Vista Ultimate
    Temps for CPU in Vista averaging at 43 - 45 degrees in XP averaging at 38 to 42 degrees.  It never seems to go much higher than 53 on Load. 
    Thermaltake Soprano tower
    MSI K9N Diamond Motherboard
    Hiper 580watt Modular PSU
    4GB OCZ Gold 6400
    AMD X2 6000+
    2 X 300gb diamond maxtor 10 HDD
    MSI Geforce 7800gt
    DVD Rom
    LG Dual Layer DVDRW+/-
    I am running a dual boot system with Windows XP Pro SP2 on one partition and Windows Vista Ultimate on the other.  Both operating systems seem to be operating properly except for an odd situation with Dual Core Center.  In Windows XP Dual Core Center only indicates the Mainboard properties - No VGA, whereas on Windows Vista Ultimate Dual Core Center indicates both VGA & Motherboard properties.  I have installed MSI Nvidia drivers for the Graphics card & also tried straight Nvidia drivers for the card but it has made no difference VGA will not show up in XP.  Yet on installing Dual Core Center on the Vista partition VGA showed up immediately.  Can anyone help.
    If anyone can come up with an answer to this it would be a real help.
    Many Thanks in advance.

    have you try to update/install the dual core driver from amd?

  • MSI P35 NEO & dual core center problem

    hi, i have a problem with my motherboard msi, Bios 1.2  and the dual core center 2.0.0.8 ,since days ago, the msi dual core center 2.0.0.8 so many times shows fan speeds alerts false alarms from the cpe temp, for that reason, i upgraded the appl to 2.0.1.6 ( the last),i set the oc level to 25% like with the older version, but time later the pc crash and put a black crash screen  and it dont let me to overclock my cpu    , i get back to 2.0.0.8 but the fan alarm dont stop, and i dont know if the newer version fix this problem
    any help?   
    sys specs
    msi p35 neo bios 1.2
    core 2 quad q6600
    2 gb value ram
    psu duck

    right, but i like to use msi dual core center, because i dont like to have the pc overclocked all the time, anyother suggestion for this?
     thanks for the reply

  • NX7600GT Diamond Plus and fan speed with Dual Core Center

    I just got a NX 7600GT Diamond Plus for my HTPC. I noted that Riva Tuner and other utilities are not able to control the fan speed of the video card. The only way one can control the fan speed is via Dual Core Center and 3D Core Cell. The problem is that the default setting for fan speed on Dual Core Center is too high and clearly audible. How can I get Dual Core Center to start with user defined presets during windows start-up/boot-up ?
    What I want to do is to put the fan into 'SILENT' mode automatically during Dual Core Center start-up. Any ideas / suggestions ?

    Quote from: BOSSKILLER on 17-January-07, 00:44:11
    well no need to edit manually, MSI provided everythink in easy way from core center.
    select advanced mode, create your custom profile pickup your desired settings,(setup maximum FAN RPM via buttons) and save it to custom profile.
    suggest you to read help section from program.
    So the custom profile is automatically loaded every time DualCoreCenter starts up ? Maybe there is something wrong with my install of DCC, I cannot get it to load custom profiles automatically upon startup. I can save the changes to say "User Profile 1" but the profile active on startup always is the "default" profile ...

  • Cool-n-quit/core-center

    in CnQ my cpu fan gives me an alarm above 3000 rpm's. Whatever I change in the setup, this won't stop. The fan speed alarm in set to 10.000
    Temperature is just 36 degr for CPU and 37 for system  
    Any thoughts?

    Hi everyone. As you can see I'm kind of a newb and I have some related questions. First off some background. I've done hardware installs, harddrive clean formats and swaps, etc. I was planning on building my own computer, but order one from cyberpowerinc.com. I haven't done a profile yet but will after this post so by the time you read this my system should be listed below. Anyway, in the BIOS I had cool and quiet disabled because in the manual it says to check serial numbers of chips before running it, and I didn't want to mess with pulling the heat sink , etc. to check my serial number. This morning while investigating a noise issue (high, varying frequency, buzz) I noticed in Core Center that it was related to CPU fan RPM (low RPM). I then found the program called speedfan, which allowed me to varify this, as Core Center wasn't real accurate. Using speed fan I was able to run the fan at 100% and got no buzzing. Below 70-80% I did though. I then found this thread and realized Core Center could do this (by clicking on Core Center) in another thread. So is the Cool and Quiet mode in Core Center the same as in the BIOS, because I thought if I disabled in the BIOS it would be disable, come to find out Core Center was running it (and causing the bad noise when the fan cycled to low RPM), it wasn't however slowing the CPU speed.
    So basically, I hate the buzz at low fan speed, can I just run my fan at max through Core Center? Is there another program that will allow me to run a min fan speed, but cycle say from 100% to 80%? Is it even worth that cycling if only down to 80%? Should I just set it to max or 7/8 manually? Are the BIOS and Core Center Cool and Quiet settings related?
    Any info you think will be useful to me, please let me have it. Thanks.

  • Alarm going off in core center

    I have an alarm going off in core center Theres a red arrow next to wherer it says 12 v. then in the white box it says 10.95 v  any one know what it means and what I could do about it I don't know whats normal for the readings I get in core center. My pc has been locking up and certian games wont load unless it's really cool in the room.

    Good questions! Some folks have acceptable readings with CoreCenter, by verifying them with the Hardware Monitor (in BIOS). I compared them with my SpeedFan program, and as far as temps go..I use a laser temp gun to check CPU, case, and video card temps. Voltages on the PSU can be verified with a voltmeter of course. The specifications on your NB fan should be in your manual. Or you can check out this thread at Anandtech:
    http://forums.anandtech.com/messageview.aspx?catid=29&threadid=1513370&STARTPAGE=2&enterthread=y

  • Core Center Related

    I am getting:
    1st Line: Vcore 1.49V
    2nd Line: 2.91V
    3.3V under line 2
    3rd Line 5.03
    5V under line 3
    4th Line 12.08v
    12 under line 4
    and the alarm goes off, I am very new and would be most thankful for any help.

    First off if the computer is working and stable you don't want to change any of those. Second Core Center is the wrong place to change any of those values unl;ess it is for a specific test. I don't ever recommend making any changes with Core Center for any reason. In fact I don't recommend Core Center at all.
    Best to restart with Stock values and if you are looking to play around ask first so that you knopw what changes to try and make and how to test it to see if any changes have the correct affects.
    LOL Now I sound like I am talkking down to you. I know that but I can not know what level of knowledge you have. If what I said offends you please forgive me. I am just trying to help someone I don't know and over the internet to boot. That is never really that easy to do.

  • Core Center displays in fahrenheit?

    Ok, this might be a dumb question but I can't find the answer.  I have a K8N Neo Platinum and A64 3200+ newcastle.
    For some reason, my Core Center started reporting temps in Fahrenheit instead of Celcius.  Degrees F is good if I want to know the weather, but I'm much more familiar with C when it comes to computer temps.  How would I go about changing it back to C? Plus, for whatever reason, it seemed more accurate then (after updating the BIOS) than it does now.

    Yeah...acts like a toggle switch when you right click...then pick!

  • Core Center 2.0.0.7 problems?

    Just updated to Core Center 2.0.0.7, but its causing problems.  For some odd reason Core Center won’t release so the system can shut down when asked
    to…  Couldn’t find 2.0.0.6, but did find 2.0.0.4 and installed it, no more problems shutting down.... hummmm.

    That's interesting,since the s3 sleep mode don't work on my system,it just locks up.
    I don't know why,since at first it did work,however,it's not that important to me.
    I do have installed back and forth the nvidia driver series for my mainboard to no avail.
    So i can't say if i can produce the same error.

  • Core Center freezes after 15 seconds

    I dont know if its MOBO related or if its Core Center thats the problem.
    When I start Core Center its ok but if i leave it running for more than about 15 seconds, the entire pc freezes and i have to reboot.
    Regrdless of weather it is in the sys tray or maximised.
    This problem also happens with PC Alert 4 (which I see has now been removed from the MSI download site)
    I am running Core Center v 1.7.2.0
    any ideas ?
    thanks
    Bubba

    I haven't used CoreCenter in a long time, but if I remember correctly there is an Auto button that will overclock the computer until it crashes.
    You should try to configure a utility like SpeedFan instead. CoreCenter seems to cause problems for the vast majority of users. It's a piece of software that seems to be worth exactly what you paid for it.

  • Is there any way to monitor CPU temp without Dual Core Center

    I hate Dual Core Center it has done nothing but lock my system up is there any alteranative to monitor CPU temp/Fan speed

    Quote from: Maesus on 21-March-07, 23:34:06
    I use speedfan... but for Core 2 Duo, I don't think I have to worry about the CPU temp anymore... they are really coooooooooooooll
    Does anybody have an idea what the optimal temperature range for core duo cpu:s are? I used to have an Athlon XP, which was typically 65 °, now the my E6600 is running at 35-40 ° [celsius]. But where's the critical temperature where it burns?

  • Core Center under XP with user-rights only

    I am using WIN-XP SP2 prof.
    I have installed core-center in latest version.
    Everything is alright, when i am logged in as  a Admin.
    But when i login as a normal user I can not start Core-Center via
    Startup-Folder.
    I don't want give the Admin-password to other users.
    What can I do ?
    Peter

    Some other possibilites:
    1. You can have the complete information if the data is submitted in FDF, XML, or XFDF. I opened the submit box in AA7 and noted the settings. The fact I can open it in AA7 was a bit surprising. The reason I suggest the data files is that they do not require extended rights and can simply be impored to the form on your end to get the identical results as if the whole form had been sent.
    2. I could only play the media file, but that is likely a capability of AA7 rather than an issue with flash and such.
    3. E-mail may be an issue. Some systems require additional work to be able to use E-mail for form submission. Prior to AA9, mailto require MAPI on the client machine.
    Don't know if any of these help or not, but at least they are some more tidbits of info.

  • Motherboard does not support core center

    I decided to upgrade core center through MSI update. Now when I try to start it get message "Motherboard does not support core center" Tried uninstalls of AMD drivers as well as core center to no avail. the old one worked ok, anyone know where I can get it?
    PC specs
    MSI K8t neo
    Win xp pro SP2
    Amd 64 3200
    2 gig corsair ram
    Asus Radeon xp800 Platanium
    2x Western digital 10 gig sata drives
    Pioneer DVD
    Asus tv tuner
    Creative x-fi elite pro

    Quote
    is that ok with you Sir?
    It's your pc, not mine. So, yes, it is alright with me. I don't bother when people mess up things for themselves. We're always here to help things get on the road again... and we're happy to do it. 
    Just try to see what I'm telling you: if you do not experience serious trouble, then leave things alone. Also, always try to decide if a program is really necessary or that you can do without it. For example, if you use corecenter mainly as a monitoring tool, I'd advice you to uninstall it and not to install any monitoring tool at all. You can set Cool & Quiet in BIOS and make it work by installing the AMD CPU driver (you already did, I suppose) and set power settings to Minimal power in Control Panel. This way, you system will not overheat and if it does, it will shut down automatically. Corecenter doesn't contribute to these functions in any way.

  • Core Center Question ?

    hello guys,
                    i wanted to know about corecell feature and and core center i am using latest version now and my CPU fan is usually at 4440 RPM even with gaming but my system temperature increases from 43-47 usually when gaming ? is this ok and my CPU temperature is 51C because its Prescott and i cannot do anything about it ? i wanted to know does corecell protect our computer from electric shock, overheating without Core Center or it would not without core center becasue the first time after installing windows xp service pack 1 (clean installation) i hear loud noise usually the CPU fan is on full speed but as soon as i installed the latest version of Core Center it adjusts it automatically and quietly and should i change my CPU priority for Core Center as maximum does that do any thing and i wanted to know i have DDR 400 Mhz but in bios it says DDR 333 because i have 533 FSB CPU is that right ? well does that mean i wasted my money on this or does that mean an upgrade to FSB 800 will make that better.

    well, your MSI P4 mobo is your friend, because it shuts the system down, when the CPU is about to overheat. and the function "spread spectrum" helps preventing all static issues. but you should disable it, when you overclock. at least its recommended that way in the manual.
    your temps seem fine to me, and they look even better because you have a Prescott.
    dont change any settings in corecenter. everything is just fine there. i think it reports the temps a little higher than they actually are, but thats just my two cents. but 4400RPM is really fast! my CPU fan isnt reported to be faster than 2800 at most. still enough for my CPU.
    no dude, everything is fine with your system. DDR400 memory goes in sync with FSB800 CPUs, such as the northy c versions.

  • Core Center does not show up!

    HI Guys,
    I have this problem while using Core Center. When I install it and restart my pc, my tasklist shows corecell with a processor usage of 50%, but is does not show up anywhere in my taskbar. The program is running, but I cannot see the screen.
    MSI 875P NEO-FIS2R with 1.8 bios
    Can anyone help me out? I don't understand

    I found it !!!!
    The problem was my Yamaha SW-1000G. When i remove it from my system Core Center works fine under WinXp.

  • Core Center S/W loads as a process

    System: MSI 875P Neo-FIS2R MB (BIOS AMI v1.5 061803), Intel 3.0GHz Canterwood Processor, 2GB (4x512MB) Crucial PC3200 Unbuffered ECC DDR400 Memory (CT6472Z40B), ATI AIW Radeon 9700 Pro 8X AGP Video, NVidia GForce 4 PCI Video (2nd Mon), SB Audidgy Platinum Ex Sound, (1) WD 40GB ATA133 Boot Drive, (2) Seagate 120GB SATA Drives RAID 0, (2) Maxtor ATA133 120GB Drives RAID 1, ASUS 16x DVD-ROM, Sony DRU DVD Writer, & Iomeg Zip250 drive.  Running Windows XP Pro.
    Problem: Core Center installs and loads as a process that is using 50% of my processor time instead of as an application.  Can not get the Core Center Utility to run as shown on Page 1-6 of the 875P NEO Series Quick User's Guide.  Have tried downloading updated version 1053. Any suggestions?

    Hi JackH,
    50% during startup load or all the way for the next few hours of usage? Try updating to the latest corecenter...
    All the Best... :D!!!

Maybe you are looking for