Core Center does not show up!

HI Guys,
I have this problem while using Core Center. When I install it and restart my pc, my tasklist shows corecell with a processor usage of 50%, but is does not show up anywhere in my taskbar. The program is running, but I cannot see the screen.
MSI 875P NEO-FIS2R with 1.8 bios
Can anyone help me out? I don't understand

I found it !!!!
The problem was my Yamaha SW-1000G. When i remove it from my system Core Center works fine under WinXp.

Similar Messages

  • K8T Neo - Core Center does not support your motherboard!

    I installed the latest version of Core Center utility on Windows XP x64.  But if I attempt to run it "Core Center does not support your motherboard!" is displayed.  The download website clearly states that Windows XP x64 is supported.  The message does not mention Windows XP x64 but the problem appears to have something to do with it because there is no problem on Windows XP x86. 
    Any suggestion is appreciated.

    Quote from: Kaz Honjo on 02-September-07, 21:33:39
    I tried the one from the link in your post but no dice, or "Core Center does not support . . . "
    I tried NextSensor. It seemd to be a stand-alone software and did not require installation. The result was that it did not have any effect on the fan speed. The Status indicated that Temperature of Processor and CPUCoreA were 118 and 35 degree C respectively, and that Fan Speed of CPUFan and SFan were 1250rpm respectively. These appeared incorrect. I could not get any instructions how to set it up so maybe I was not using it correctly.
    "I tried the one from the link in your post but no dice, or "Core Center does not support . . . "
    Support list :
       MS-6570E,MS-6580(v5.0),MS-6585(v5.0),MS-6590(v2.0),
       MS-6702(v1.0,v2.0),MS-6702E,MS-6714(v5.0),MS-6728(v1.0,v2.0,v3.0),MS-6741,MS-6758(v1.0,v2.0),MS-6788(v1.0,v2.0),MS-6799,
            MS-7003,MS-7008,MS-7021,MS-7025,MS-7028(v1.0,v2.0),MS-7030,MS-7031,MS-7032,MS-7033,MS-7037,MS-7043,MS-7047,MS-7052,MS-7053,MS-7058,MS-7066,MS-7088,
       MS-7100,MS-7125(v1.0,v3.0,v3.A),MS-7133,MS-7135,MS-7143(v2X),MS-7151,MS-7157,MS-7158,MS-7160,MS-7166,MS-7175,MS-7176(v1.0,v2.0),MS-7185,MS-7194
       MS-7203,MS-7220,MS-7226,MS-7235(v1.1),MS-7236(v1.0,v2.1,v2.2,v2.4),MS-7246,MS-7250(v1.0,v2.0),MS-7260,MS-7267(v2.1,v3.0,v3.1,v3.2),MS-7279(v1.0,v2.3),MS-7280
    OS : Windows 98/Me/2000/XP32/XP64
    Basically should work...
    "I tried NextSensor. It seemd to be a stand-alone software and did not require installation. The result was that it did not have any effect on the fan speed. The Status indicated that Temperature of Processor and CPUCoreA were 118 and 35 degree C respectively, and that Fan Speed of CPUFan and SFan were 1250rpm respectively. These appeared incorrect. I could not get any instructions how to set it up so maybe I was not using it correctly."
    go to "Control", "Automatic Profile" and select the right senzor to be used.

  • DualCoreCenter error - "Dual Core Center does not support!"

    Hi, just bought the insanely expensive MSI 8800 GTX Ulta OC (£457), which seems to ship with insanely cheap utilities.
    I installed the Dual Core Center (after installing the 'latest' nvidia driver 158.22).
    During the install, it insisted on a net framework 2 repair/uninstall for some unknown reason (I have net framework 2 and 3 installed - ie all latest xp patches) with no prior problems.
    Anyway, I let it do the repair and install itself.
    Now when I run the DualCoreCentre, it comes up with error msg: "Dual Core Center does not support!"
    Can someone shed light on what that means please.
    Thanks...

    It means:
    I suck, don't use me!
    Stay away from MSI's utilities. If you want to overclock or control fan speeds or anything else.
    Have a look through: here

  • "Dual Core Center does not support" error msg on K9N Platinum

    Hi,
    I just formated my system and installed all the drivers as I usually do. Last thing I installed was the Dual Core center. I cant make it run as I get "Dual Core Center does not support!" error message. I have an Athlon64 X2 4200+ with the latest cpu driver from AMD web site. Any idea on how I could make Dual Core Center work?
    Thank you.

    Oh ok.
    Well on the CD there is a Core Center, but on the site if you go deep into the specific motherboard download section there is a Dual Core Center. I guess it is for dual CPUs.
    I've download the AMD X2 Driver. I just wanted to use the Cool'N'Quiet option, since I was told that I needed the "Core Center" for that.

  • "Core Center does not support your motherboard" MSI P965 Neo Mobo

    Hi all,
    after upgrading to bios version 1.8 I can not seem to be able to use the Core Center application. Every time I try to start up the application I get an error saying that "Core Center does not support your motherboard". I tried to uninstall and reinstall the program, update to the latest version but with no success. I also tried to use the Dual Core Center but the result was the same.
    Since I am using this program does anybody knows any fix for this problem please. I am sure that this is due to the bios update but I do not know what to do.
    Thanks and Best Regards
    Phanos
    PS
    My System specs are
    Intel core 2 duo 2.13GHz No Overclocking
    Twinmos DDR667  3GB (2 x 512, 2 x 1GB)
    P965 Neo Motherboard bios version 1.8
    Gigabyte 7600GS Graphic card
    Enermax 530 Watt
    Western Digital 16Mb cache 250 GB hard drive @ SATA-2, no RAID
    Maxtor  16Mb cache 320 GB hard drive @ SATA-2, no RAID
    Seagate  16Mb cache 200 GB hard drive @ IDE, no RAID
    BIOS - optimal settings enable USB, 1394 and ACPI.
    WinXP + SP2 + all latest Windows Updates

    Hi Maesus,
    the version of the Core Center is 2.0.2.3. In the about box it does not say beta. I still can not see the new version using the MSI Live Update 3. If someone needs this version please let me know at email removed to prevent spam or contact Msi directly at http://support.msi.com.tw/index.php
    Best Regards
    Phanos
    I removed your email address to prevent you from getting spammed.
    Those wishing to email Phanos, click the email icon to the left below his name.
    Frankenputer

  • Cisco LMS Prime: Device Center does not show Port statistics for Routers

    Hello,
    i am wondering why the Port Statistics for Routers are not showing in the Device Center Port Status Section. Is this normal behaviour?
    thanks
    Alex

    Hi Afroj,
    Data Collection as well as Usertracking ran successfully.
    regards
    Alex

  • Notification Center does not show current calendar entries? How can i fix it?

    Sometimes entries for the next 24hours are shown in notification center, and sometimes not. It doesn't have to do with setting an alert, or not.
    I really don't know, why it isn't possible to Show up calendar entries for at least 3 days for example.

    Searching on keywords, if that's what you're doing, has never really worked. As to searching just on the category in the iTunes Store, it's most unlikely to throw up your podcast. There are thousands of podcasts out there, and it would be quite impossible to display on one page the entire list for any category. What you see are 'featured' podcasts, chosen by Apple as being special; please see this Tech Note:
    http://www.apple.com/itunes/podcasts/specs.html#getfeatured
    Note that there is no way you can influence the selection other than making your podcast really special.

  • Notification and Control Center does not show

    Hi,
    Sometimes (I don't know exactly under which circumstances) on my iPhone 4 (iOS 7.0.2), Notification and Control Center won't appear with swipe gestrue.
    In this situation, When iPhone is locked and a notification (like message or phone call) arrives, the screen ALWAYS shows that notification and the screen is always on, until I arraive and lock it manually !! The second one is a serious problem beacuse after some hours the battery drops dramatically.
    ONLY a reboot solves this probelm.
    Is there any solution to this topic rather than reboot?

    Same problem! I have a 4 though so maybe that's the problem? What iphone do you have?

  • New core center version, not working!

    Iv ealier used Core center with success on my old ms-6561 board. Just formated my drive and wanted to download again, but only found this new one and it does not support my board. Where cfan I find older core senter files?

    core center does not display the temps correctly. download a program called speedfan. its better than corecenter      

  • I downloaded mavericks and the notification center does not work

    When I do the three finger swipe to the left on the trackpad, the notification center does not show up and when I click on the manual (at the top right of the screen) It shows up with the messages and facebook thing but it wont allow me to click on them and when I look on the system preferences area of the notification center it doesn't have any options.

    when I look on the system preferences area of the notification center it doesn't have any options.
    The Notifications pane in System Preferences is blank?
    When I do the three finger swipe to the left on the trackpad, the notification center does not show up
    No, it doesn't. You have to swipe with two fingers. Start the swipe with your fingers off of the trackpad.

  • Desktop Software 6.0 (PC) does not show OS 6 system software and core applications

    I have installed DM 600_b047 on my PC (running WinXP w/ SP3). I have also installed both OS 6.0.0_rel862 and 5.0.0_rel1385 on the same PC. When I connect my Bold 9000 to the PC, DM shows everything that is installed on the device. However, when disconnect the Bold and I connect my Torch 9800, DM shows only the third-party apps installed on the device. DM does not show the System Software, Core Applications, Phone, etc. that are installed on the Torch.
    On another PC (also WinXP w/ SP3), I have installed the same DM and OS software. DM on the latter PC shows all System Software, Core Apps, 3rd-party apps, etc. of both the Bold and Torch.
    I would appreciate any suggestions how to get my other PC to show all BB software installed on the Torch. I have already uninstalled and reinstalled the DM and OS software on the one PC. It did not resolve my issue.
    Thank you.

    Here's how I resolved my issue:
    1. On the DM's Applications page, click the "Import files" button.
    2. Drill down to the folder containing the .alx files of the BB OS. In my case, that would be "C:\Program Files\Common Files\Research In Motion\Shared\Loader Files\9800M_v6.0.0.284_P6.4.0.120"
    3. Select the alx files shown.in the files window..
    4. Click the "Open" button of the dialog box.
    5. Wait for DM to finish processing the selected files.
    Voila! Now I see all the apps.
    Maybe RIM's software and/or system engineers can explain how the DM software got into the condition where it apparently had not selected the .alx files.

  • My control center and notification center are not showing when I swipe in there respective locations. Does anybody know why?

    My control center and notification center are not showing when I swipe in there respective locations. Does anybody know why?

    Thank you for the sugestion, but it was working fine both on the lock screen and on my home screen. I check all my settings and it is how it was from Friday, when I got the iPhone 5s. It just stop working.  The only way I can fix it is by shutting down the phone. It will work for a while, then it won't. 

  • I have installed apps Hungry Shark vobec but it does not show me the settings I like it or not even in the game center I have not updated results from it you can not help me thank you

    I have installed apps Hungry Shark vobec but it does not show me the settings I like it or not even in the game center I have not updated results from it you can not help me thank you

    Hi Marcel1no,
    Welcome to the Apple Support Communities! 
    I understand that it can be frustrating when an application downloaded from the App Store is not behaving as you would expect. In this situation, I would recommend using the attached article for information on troubleshooting apps downloaded from the App Store. 
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
    Cheers,
    Joe 

  • I had to reload ice age village and now my progress does not show up even though it is still in game center

    I had to reload ice age village and now my progress does not show up even though it is still in game center

    Your settings are not saved. try with new profile.
    Create a new profile as a test to check if your current profile is causing the problems. <br>
    See '''Creating a profile''':
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem <br>
    '''Profile Backup and Restore'''
    *http://kb.mozillazine.org/Profile_backup
    *https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • PS gallery linked to Dreamweaver does not show up once on pub. server

    i created a photoshop gallery and linked it to my website (Dreamweaver) under construction (as im learning); it shows up fine when i preview it on browser from my computer location, however, it does not show up once on the public server. any help as to the direct problem with this link/file/coding, etc... would be greatly appreciated....
    site >>>> http://paulrosal.com/ >>>>> CLICK ON "ART"
    ******************************CHECK OUT CODING RIGHT HERE******************************
    <!-- saved from url=(0013)about:internet -->
    <html lang="en">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
    <title>gallery</title>
    <style>
    body,html {
    margin-top:0;
    margin-left:0;
    margin-right:0;
    margin-bottom:0;
    height: 100%;
    width: 100%;
    </style>
    <!-- Active Content Workaround Support File -->
    <script src="resources/AC_RunActiveContent.js" language="javascript"></script>
    <script language="JavaScript" type="text/javascript">
    function getQueryVariable(variable) {
      var query = window.location.search.substring(1);
      var vars = query.split("&");
      for (var i=0;i<vars.length;i++) {
        var pair = vars[i].split("=");
        if (pair[0] == variable) {
          return pair[1];
      return -1;
    </script>
    <script language="JavaScript" type="text/javascript">
      var startImg = getQueryVariable("startImg");
      //alert(startImg);
    </script>
    <!-- Flash Detection Script Block -->
    <script language="JavaScript" type="text/javascript">
    <!--
    // Globals
    // Major version of Flash required
    var requiredMajorVersion = 8;
    // Minor version of Flash required
    var requiredMinorVersion = 0;
    // Minor version of Flash required
    var requiredRevision = 0;
    // the version of javascript supported
    var jsVersion = 1.0;
    // -->
    </script>
    <script language="VBScript" type="text/vbscript">
    <!-- // Visual basic helper required to detect Flash Player ActiveX control version information
    Function VBGetSwfVer(i)
      on error resume next
      Dim swControl, swVersion
      swVersion = 0
      set swControl = CreateObject("ShockwaveFlash.ShockwaveFlash." + CStr(i))
      if (IsObject(swControl)) then
        swVersion = swControl.GetVariable("$version")
      end if
      VBGetSwfVer = swVersion
    End Function
    // -->
    </script>
    <script language="JavaScript1.1" type="text/javascript">
    <!-- // Detect Client Browser type
    var isIE  = (navigator.appVersion.indexOf("MSIE") != -1) ? true : false;
    var isWin = (navigator.appVersion.toLowerCase().indexOf("win") != -1) ? true : false;
    var isOpera = (navigator.userAgent.indexOf("Opera") != -1) ? true : false;
    jsVersion = 1.1;
    // JavaScript helper required to detect Flash Player PlugIn version information
    function JSGetSwfVer(i){
    // NS/Opera version >= 3 check for Flash plugin in plugin array
    if (navigator.plugins != null && navigator.plugins.length > 0) {
    if (navigator.plugins["Shockwave Flash 2.0"] || navigator.plugins["Shockwave Flash"]) {
    var swVer2 = navigator.plugins["Shockwave Flash 2.0"] ? " 2.0" : "";
                    var flashDescription = navigator.plugins["Shockwave Flash" + swVer2].description;
    descArray = flashDescription.split(" ");
    tempArrayMajor = descArray[2].split(".");
    versionMajor = tempArrayMajor[0];
    versionMinor = tempArrayMajor[1];
    if ( descArray[3] != "" ) {
    tempArrayMinor = descArray[3].split("r");
    } else {
    tempArrayMinor = descArray[4].split("r");
                    versionRevision = tempArrayMinor[1] > 0 ? tempArrayMinor[1] : 0;
                flashVer = versionMajor + "." + versionMinor + "." + versionRevision;
               } else {
    flashVer = -1;
    // MSN/WebTV 2.6 supports Flash 4
    else if (navigator.userAgent.toLowerCase().indexOf("webtv/2.6") != -1) flashVer = 4;
    // WebTV 2.5 supports Flash 3
    else if (navigator.userAgent.toLowerCase().indexOf("webtv/2.5") != -1) flashVer = 3;
    // older WebTV supports Flash 2
    else if (navigator.userAgent.toLowerCase().indexOf("webtv") != -1) flashVer = 2;
    // Can't detect in all other cases
    else {
    flashVer = -1;
    return flashVer;
    // When called with reqMajorVer, reqMinorVer, reqRevision returns true if that version or greater is available
    function DetectFlashVer(reqMajorVer, reqMinorVer, reqRevision)
          reqVer = parseFloat(reqMajorVer + "." + reqRevision);
            // loop backwards through the versions until we find the newest version    
    for (i=25;i>0;i--) {    
    if (isIE && isWin && !isOpera) {
    versionStr = VBGetSwfVer(i);
    } else {
    versionStr = JSGetSwfVer(i);         
    if (versionStr == -1 ) {
    return false;
    } else if (versionStr != 0) {
    if(isIE && isWin && !isOpera) {
    tempArray         = versionStr.split(" ");
    tempString        = tempArray[1];
    versionArray      = tempString .split(",");                   
    } else {
    versionArray      = versionStr.split(".");
    versionMajor      = versionArray[0];
    versionMinor      = versionArray[1];
    versionRevision   = versionArray[2];
    versionString     = versionMajor + "." + versionRevision;   // 7.0r24 == 7.24
    versionNum        = parseFloat(versionString);
                 // is the major.revision >= requested major.revision AND the minor version >= requested minor
    if ( (versionMajor > reqMajorVer) && (versionNum >= reqVer) ) {
    return true;
    } else {
    return ((versionNum >= reqVer && versionMinor >= reqMinorVer) ? true : false );    
    // -->
    </script>
    </head>
    <body><div align="center" style="width:100%; height:100%">
    <script language="JavaScript" type="text/javascript">
    <!--
    // Version check for the Flash Player that has the ability to start Player Product Install (6.0r65)
    var hasProductInstall = DetectFlashVer(6, 0, 65);
    // Version check based upon the values entered above in "Globals"
    var hasReqestedVersion = DetectFlashVer(requiredMajorVersion, requiredMinorVersion, requiredRevision);
    // Location visited after installation is complete if installation is required
    var MMredirectURL = window.location;
    // Stored value of document title used by the installation process to close the window that started the installation process
    // This is necessary to remove browser windows that will still be utilizing the older version of the player after installation is complete
    // DO NOT MODIFY THE FOLLOWING TWO LINES
    //document.title = document.title.slice(0, 47) + " - Flash Player Installation";
    document.title = document.title.slice(0, 47);
    var MMdoctitle = document.title;
    // Check to see if a player with Flash Product Install is available and the version does not meet the requirements for playback
    if ( hasProductInstall && !hasReqestedVersion ) {
        var productInstallOETags = '<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"'
        + 'width="550" height="200"'
        + 'codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab">'
        + '<param name="movie" value="resources/playerProductInstall.swf?MMredirectURL='+MMredirectURL+'&MMplayerType=Ac tiveX&MMdoctitle='+MMdoctitle+'" />'
        + '<param name="quality" value="best" /><param name="bgcolor" value="#3A6EA5" />'
        + '<embed src="resources/playerProductInstall.swf?MMredirectURL='+MMredirectURL+'&MMplayerType=Plug In" quality="high" bgcolor="#3A6EA5" '
        + 'width="550" height="300" name="detectiontest" align="middle"'
        + 'play="true"'
        + 'loop="false"'
        + 'quality="best"'
        + 'wmode="opaque"'
        + 'allowScriptAccess="sameDomain"'
        + 'type="application/x-shockwave-flash"'
        + 'pluginspage="http://www.adobe.com/go/getflashplayer">'
        + '<\/embed>'
        + '<\/object>';
        document.write(productInstallOETags);   // embed the Flash Product Installation SWF
    } else if (hasReqestedVersion) {  // if we've detected an acceptable version
        AC_FL_RunContent(
    'codebase', 'http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0',
    'flashvars','baseRefUrl=resources/&groupxml=group.xml&stylexml=style.xml&localText=localT ext.xml&livePreview=false&startImg='+startImg,
    'width', '100%',
    'height', '100%',
    'src', 'resources/gallery',
    'quality', 'high',
    'pluginspage', 'http://www.adobe.com/go/getflashplayer',
    'align', 'middle',
    'play', 'true',
    'loop', 'true',
    'scale', 'showall',
    'wmode', 'opaque',
    'devicefont', 'false',
    'id', 'gallery',
    'bgcolor', '#f7f7f7',
    'name', 'gallery',
    'menu', 'true',
    'allowScriptAccess','sameDomain',
    'movie', 'resources/gallery',
    'salign', ''
      } else {  // flash is too old or we can't detect the plugin
        var alternateContent = 'This photo gallery requires the Adobe Flash Player.'
            + '<a href=http://www.adobe.com/go/getflash/>Get the free Flash Player here</a>';
        document.write(alternateContent);  // insert non-flash content
    // -->
    </script>
    <noscript>
    // Provide alternate content for browsers that do not support scripting
    // or for those that have scripting disabled.
           Sorry, this photo gallery requires that scripting be enabled on your web browser and that the Adobe Flash Player be installed.
      <a href="http://www.adobe.com/go/getflash/">Download the Adobe Flash Player</a>
    </noscript>
    </div>
    </body>
    </html>

    Are you sure you have uploaded everything in the gallery folder to the correct location. It can't find the index.html page.

Maybe you are looking for