Core Center freezes after 15 seconds
I dont know if its MOBO related or if its Core Center thats the problem.
When I start Core Center its ok but if i leave it running for more than about 15 seconds, the entire pc freezes and i have to reboot.
Regrdless of weather it is in the sys tray or maximised.
This problem also happens with PC Alert 4 (which I see has now been removed from the MSI download site)
I am running Core Center v 1.7.2.0
any ideas ?
thanks
Bubba
I haven't used CoreCenter in a long time, but if I remember correctly there is an Auto button that will overclock the computer until it crashes.
You should try to configure a utility like SpeedFan instead. CoreCenter seems to cause problems for the vast majority of users. It's a piece of software that seems to be worth exactly what you paid for it.
Similar Messages
-
Mjpeg stream freezes after seconds in safari 6.0
Hi
Just installed Mountain Lion together with Safari 6.0. All looks ok but now i notice that the MJPEG streaming videos are freezing after a few seconds. Tried several sites and all with the same result. Any clues?Deselect Enable plug-ins in Safari > Preferencs > Security, quit then relaunch Safari to test. Might be a plugin that's either not compatible with Safari 6 or causing a conflict with MPEG files.
If that makes a difference, troubleshooting help here >Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues -
Seems that MSI Core Center windows application does not like underclocking...
When i overclock with this tool everything is okay...
however, when i try to revert to previous setting using the tool, Machine freezes
Well i guess software programming is not the strong point of MSI
MarkoulWelcome to the club I like most pps played with corecentre when rig was 1st built. Since then alll oc done through bios. Only have core centre instakked to allow access tio corecell chip to reset fan settings if needed. Have removed it from starting with xp/
luck -
Core center problem after flashing
i have
(2)operating system in my computer (win-98se)
and (win-2k).
newly I have flashing my BIOS with latest version of
liveupdate and now evrytings are running
good.
but whenever corecenter running in my computer in (win-98se)
I see a blue screen with this content:
( A FATAL EXCEPTION 0D HAS ACCURRED AT 0028:E9742715 IN VXD RUSHTOP (01)
+00000245.THE CURRENT APPLICATION WILL BE TERMINATED )
and when runing in (win2k) that have result in restarting the system .
but i dont have this problem with previous BIOS version .
withal :
i have this problem with previous version of core center and latest version
of that after flashig !
can anybody help me ?
[email protected]What Version of Core-Center are you running?...Sean REILLY875
-
Hello, I am having a hard time getting this installed correctly(dual core center). After I get it installed it only shows info for my 8800 card none for my motherboard displays a error message saying m/b driver did not install. Ntune installed the first time but only shows limited info, after uninstalling both utility's n tune won't reinstall and core does the same as before. Any help would be great!
Sorry for the lame no info post above! I have filled out my signature with my system info, let me know if there is anything else I should put in.
I could not find what version of DCC I am using but I hope it is the latest because MSI live update is telling me it is current.
Where can I find the Moan guide you mentioned in above post? -
Photoshop CS5.5 freezes after 10 seconds of use every time
Hey everyone,
So weve been going nuts over this! Essentially I work for a big company, and we all have company laptops that we use to work on, which all have essentially the same programs installed on them. I have a Dell Latitude E6530, its running Windows 7, has a Corei7 vPro inside. Im running Adobe Production Premium CS5.5, and all the programs work perfectly fine (like I use Flash and Illustrator as well with no issues.) except for Photoshop.
When I boot up Photoshop (either version, 32 or 64), Ill be able to use it for about 10 seconds and then it will freeze. It will stay frozen until I actually go in and Task Manager the program off. It does not crash. This literally works with anything I do in Photoshop, I could literally have nothing open and go to the Preferences menu, and it will freeze there. I have tried looking up this problem online and I havent seen it as specified as this, I have seen it where people do something specific, like go to save, and it freezes AND crashes. Mine just freezes after ANYTHING I do after 10 seconds of use.
More about my set up. I have 3 monitors linked to my laptop. I initially thought maybe cutting it down to 2 or 1 might help, because it seemed to yesterday for a moment, but today I tried it and I had the same issue. I also have Symantic Encryption on my laptop, but so does everyone else and they can all run Photoshop completely fine. Weve updated the drivers and updated Photoshop and everything to the latest versions.
Does anyone know if Im just doing something very simple wrong that Im overlooking? I have seriously never had an issue this bad with Photoshop before. Let me know if you need any other information. Thanks for your help!Yes, basically we have all the default fonts installed on our computers, but we use a program called Universal Type Client to get the fonts we need, and UTC grabs fonts from a server and temporarily makes them usable on our computer. But everyone has this software so I dont think that would have anything to do with it.
Could it possibly have something to do with my Video Drivers or Graphic Cards? Our tech guy mentioned it was strange that my computer had two different things (I believe he said I have a CORE i7 vPro and Nvidia NVS 5200M or something and that they may be competing?) or the amount of monitors Im using? -
My imac 17' core duo 1.8ghz a1173 freezes after about 1 minute of running
My imac 17" core duo 1.8ghz A1173 freezes after about 1 minute of running. I re-start the imac about a half a dozen times and it stays running and will re-start from the sleep mode and will continue to operate properly until I put it in sleep mode or it goes to sleep mode. If I turn it off, I must go through the same hassle. Advise/suggestions. Thanks.
Hello arty102
Welcome to Apple Support Communities
Reset the SMC > http://support.apple.com/kb/HT3964
+1. Shut down the computer.+
+2. Unplug the computer's power cord.+
+3. Press and hold the power button for 5 seconds.+
+4. Release the power button.+
+5. Attach the computers power cable.+
+6. Press the power button to turn on the computer.+
Then if that doesn't help,
Run the Extended Apple Hardware Test > http://support.apple.com/kb/HT1509
Dennis -
ITunes freezes after 30 seconds
No matter what I do on my computer, my iTunes automatically freezes after 30 seconds of opening. How can I fix this? Because I can't even buy music or sync my iPod.
Hi if not now,
In order to see your device in iTunes you may just need to select the option to have the Sidebar shown, something that by default is not displayed. This is where Devices and other items are displayed that you may be trying to locate.
iTunes 11: Frequently used features
http://support.apple.com/kb/HT5649
Show Status Bar - Choose View > Show Status Bar (this feature will conveniently display the number of items and playback time for a category, for example, music or movies).
I hope this helps!
- Ari -
Flash-Based BBC h264 Videos Freeze After 8 Seconds
Hello,
I like to view BBC news videos since March on my new Desktop Windows 7 64 bit Pro system. For about 2 weeks now, I've been having trouble viewing about half of these videos. Half play all the way through fine and the other half freeze after 8-10 seconds. I have a CAT 5e 7 mbit cable modem connection so speed is not an issue. My Wi-Fi connected Windows 7 Home Premium laptop uses the same router and can play the same videos with no problems.
On my Desktop, this freezing happens on both FireFox 12 and Internet Explorer 9. I did all the usual things to try to fix the problem. I cleared the caches on both FF12 and IE9. Yesterday, I uninstalled both the Adobe Flash FF12 plug-in and IE9 Active-X versions and reinstalled with the latest version, 11,3,300,262. Today, I upgraded to the latest version, 11,3,300,265. Nothing has solved the problem.
Here are the specs for the BBC Flash-based player:
Problem Videos:
URL: http://www.bbc.co.uk/news/uk-northern-ireland-18819815
EMP v.3.1.0.r749603_749269_749444_5
18819815 | 800kbps | h264 | AK 4.5 (1) | 640x360
URL: http://www.bbc.co.uk/news/world-middle-east-18733664
EMP v.3.1.0.r749603_749269_749444_5
18733664 | 800kbps | h264 | AK 4.5 (1) | 640x360
URL: http://www.bbc.co.uk/news/world-asia-china-18818139
EMP v.3.1.0.r749603_749269_749444_5
18818139 | 800kbps | h264 | AK 4.5 (1) | 640x360
This video plays OK:
URL: http://www.bbc.co.uk/news/world-us-canada-18801596
EMP v.3.1.0.r749603_749269_749444_5
18801601 | 800kbps | h264 | AK 4.5 (1) | 640x360
The only difference I noticed was the initial screen size of the video. On the problem videos, the size is bigger than the OK one. I assume the BBC videos are h264 encoded. On both my Desktop and my laptop, I have 2 msmpeg2vdec.dll files. 1 in C:\Windows\System32 and another in C:\Windows\SysWOW64. They are both v6.1.7140.0. On both my Desktop and laptop, the sizes are different, 2.52 MB & 2.03 MB.
I am using the latest nVidia driver v301.42 which I installed 5/30/2012, over a month ago. The only recent change which happened to my system on 7/4/2012 was my Norton Internet Security 2012 subscription expired. NIS2012 then disabled itself and activated the built-in Windows firewall. 3 days ago I uninstalled NIS2012. I also used the Norton Removal Tool. I then installed a new NIS2012 with a new legitimate key. However, I am still getting this freezing and I don't remember if I got this freezing before 7/4/2012.
On both FF12 and IE9, I can play Hulu, YouTube, Yahoo!, and Amazon videos with no problems. When you right-click on any of these other flash players, nowhere does it say "h264."
My questions are:
1) does the Adobe Flash Player, for both the FF12 plug-in and IE9 ax players, use the Windows7 CODEC?
2) Which file is the h264 CODEC, is it msmpeg2vdec.dll or something else?
3) Will installing a new CODEC pack fix this problem?
4) Is there anything else I have overlooked? Is there anything else I can do to fix this problem?
Thanks.Interestingly, the advertisement plays correctly. When you right-click on the ad, it does not say h264. I have 2 video cards and several monitors on my Desktop. It might have something to do with that. Otherwise, perhaps one of my other apps did something to the Flash Player h264 playback.
I'm thinking maybe if I upgraded the h264 CODEC, maybe it will play correctly again. CODEC GUIDE has a codec package which I already downloaded but haven't installed yet. I downloaded the "Basic." Unless you really need to, I don't recommend anyone install it. If you want to install a CODEC package, just install the "Basic" package and not one of the bigger packages. I think they make changes to your system. Before installing it, be sure to make a full backup of your Windows system.
http://www.codecguide.com/download_kl.htm -
Videos freeze after 5-7 seconds, no audio at all - Google Chrome
Win7 x64
Google Chrome 21.0.1180.60 m
Flash version 11.3.31.222
My os is 64-bit, but the "what version of flash are you running" window says it's 32-bit. Which strikes me as odd. Anyway,
Problem is basically laid out in the subject. No matter what video I try to play, it freezes after a few seconds. There is no audio whatsoever. I tried the uninstall (using the uninstaller) I found in another Flash forum, but it didn't help. As a matter of fact, running the uninstaller made no difference at all. Videos still played for a few seconds, sans audio, then froze.
Is there a fix for this? It only started happening yesterday.
Update: Also happens in Firefox. IE works fine.Our Chrome browser not only automatically updates it's version (21.0.1180.60m) without notice , but the Shockwave Flash (11.3.31.222/ 11.3.300.268) plugins too!!!
I had to disable 11.3.31.222 along w. 11.3.300.268 and have 11.2 r202 (11.2.202.235) solely enabled again because this time, i had 'shockwave plugin unresponsive' at some websites that stalled pages, and of 11.3.300.268., 'unresponsive shockwave plugin' refused to play YT.
*type: chrome://plugins in address bar in chrome - click the + on the top right
And enable/disable plugins
I think d/l's here might very well work: http://www.oldapps.com/flash_player.php
or, directly
(Although it seems some are not happy w. crashing browsers and such with 11.3.300.268 version!?)
Adobe Flash Player 11.3.300.268 (Non-IE)
http://www.oldapps.com/flash_player.php?old_flash_player=8021 -
[SOLVED] GNOME login screen freezes after 3 seconds
Hello,
today I installed Arch-Linux the first time. I had some issues during the installation (following https://wiki.archlinux.de/title/Anleitu … Einsteiger (its the german version, seems to differ a little from the english version)), but everything went good until I installed GNOME. Now the login screen freezes everytime after quite exactly 3 seconds, unless I press [strg]+[alt]+[f2] fast enough to switch in tty2. Then the screen will only freeze when I switch back to tty1. Once the screen is frozen, I can't switch to tty2 anymore.
I think the problem has something to do with my nvidia hybrid graphic system. During the installation I installed the packages bumblebee, bbswitch and primus, but uninstalled them because I thought they could be the problem. But although I uninstalled the packages, the "Stamina-Mode" status led is turned on after the system has started and the "Speed-Mode" status led not. I think that's a little bit strange, because I can't imagine which process is controlling these leds.
So I ran just
pacman -S xorg-drivers
and I had to create the xinitrc-file (because I could not find this file in /etc/skel). Now the default GUI appeared after I ran
startx
(I saw some windows and a clock). After that I installed gnome, changed the xinitrc-file in my userhome and got the freeze after a reboot.
I don't know if it has anything to do with my problem, but I get the following error-messages everytime I boot:
[drm:ibx_irq_handler] *ERROR* PCH transcoder A FIFO underrun
[drm:intel_dp_start_link_train] *ERROR* too many full retries, give up
[drm:ilk_display_irq_handler] *ERROR* Pipe A FIFO underrun
interl ips 0000:00:1f.6: thermal reporting for required devices not enabled, aborting
Hoeman
P.S.: Because I'm a total beginner at linux I probably missed the most important informations, but I can give you more if you tell me how
Last edited by Homan42 (2014-10-18 19:43:17)Ok, I could solve the problem myself by installing the latest nvidia driver. Now I guess the intel grahic card is not used anymore, but I don't really know...
-
My MacBook Pro Retina freezes 30 seconds after Startup and the fan constantly makes noise. How do I fix this?
Have you tried:
http://support.apple.com/kb/ht1379
and
http://support.apple.com/kb/ht3964 -
Firefox freezes after 2 seconds, sometimes 3 after opening.
Well i was going to report it privatly via feedback, but i have to be using firefox to do that. If i could use firefox i wouldnt be here would i num nuts. But anyway, firefox freezes after i open it. Maybe 2 or 3 seconds after opeing the program. So if im quick on the tabs i can get awindow open and start a page loading before it freezes but thats it. Its unusable. I have restarted et al, but to no noticable benefit.
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
[Solved] Screen freezes few seconds after logging in.
Hey there.
I'm looking for some guidance if possible.
I installed Arch in an external hard drive to test out the compatibility with my laptop (a LG P1-J331P > http://pastie.org/8548089 ) with an ATI Mobility Radeon X1400 video card. All following the beginner's guide [https://wiki.archlinux.org/index.php/Beginners%27_Guide] and relevant wiki for the external/usb device installation [https://wiki.archlinux.org/index.php/Usb_installation].
Running arch with "nomodeset" on kernel parameter, it runs normally, except that the screen resolution was fixed at [email protected], though it should be maxed at 1280x800@60.
When "nomodeset" is set:
$dmesg | grep radeon
[ 10.859500] [drm] VGACON disable radeon kernel modesetting.
[ 10.859507] [drm:radeon_init] *ERROR* No UMS support in radeon module!
Without using "nomodeset", the system detects correctly the screen resolution but it freezes few seconds later after logging. Can't Ctrl+Alt+F1.
Tried:
- added "radeon" to MODULES array in the mkinitcpio file. And run the subsequent "mkinitcpio -p linux";
- created a "/etc/rc.d/rc.local" file with contents:
modprobe -r radeon
modprobe -r drm
modprobe radeon modeset=1
- tested "radeon.pcie_gen2=0", "pci=nomsi", "noapic" and "acpi=off" to the kernel parameter.
- created a "/etc/X11/xorg.conf.d/10-monitor.conf" file with contents: http://pastie.org/private/bhcbfvs3zvplvspwamxa2q
Video card drivers installed: mesa, xf86-video-vesa and xf86-video-ati.
lsmod > http://pastie.org/private/orfrp0qg8kijqwuvrrxqag
uname -r > http://pastie.org/private/u89igykam0slvnv2ffhhpq
lspci | grep VGA >
dmesg | grep radeon >
journalctl --since=today >
cat /var/log/Xorg.0.log > http://pastie.org/private/thgrsplegancpggsfsbjlw
top -b > http://codepad.org/iojWRb9U
Any advice for this newbie would be appreciated.
Last edited by T-Cypher (2014-03-11 16:00:55)- Tried creating a "/etc/X11/xorg.conf.d/20-radeon.conf" file with contents:
Section "Device"
Identifier "ATI Mobility Radeon X1400"
Driver "radeon"
Option "SWcursor" "off" #software cursor might be necessary on some rare occasions, hence set off by default
Option "EnablePageFlip" "on" #supported on all R/RV/RS4xx and older hardware, and set on by default
Option "AccelMethod" "EXA" #valid options are XAA, EXA and Glamor. EXA is the default
Option "RenderAccel" "on" #enabled by default on all radeon hardware
Option "ColorTiling" "on" #enabled by default on RV300 and later radeon cards
Option "EXAVSync" "off" #default is off, otherwise on. Only works if EXA activated
Option "EXAPixmaps" "on" #when on icreases 2D performance, but may also cause artifacts on some old cards. Only works if EXA activated
Option "AccelDFS" "on" #default is off, read the radeon manpage for more information
EndSection
And the subsequent Xorg.0.log > http://pastie.org/private/goyhnu9bzxhzybl4sisaa
With this file and using "nomodeset", the boot would be stuck at :
[ OK ] Reached target Graphical Interface.
But without "nomodeset" parameter, it would successfully launch the graphical login but still freezes a few seconds after logging in.
xdpyinfo | grep -B2 resolution
screen #0:
dimensions: 1280x800 pixels (338x211 millimeters)
resolution: 96x96 dots per inch -
I use garagband regulalry for voice recording. It now freezes after a few seconds(if that) of recording. I use an Audio Technica usb mic with no problems. I remember this happening with GB afer another OS upgrade in the past.. Is there a problem or should I be looking for something on my setup? I run 14gb of ram, have a timemachine connected and use an apogee duet.
No problem ; if you look at the question you posted initially - your forst post-, it is signed with a profile signature as the last line:
MacPro, Mac OS X (10.6.1)
and that made us think, that you still are using Mac OS Leopard, where the user library in your Home Folder is visible and easily accessible.
You can change your profile from the "your Stuff" drop-down menu in the upper right corner of this webpage:
Regards
Léonie
Maybe you are looking for
-
Hi all, I'm fairly new to programming with JNI, so please excuse me if I ask a dumb question. I'm trying to call a Java method from a C++ class, but when I run the program, it throws an error, crashing the program. I'm pretty sure the problem is that
-
iPod touch second generation. Trying to sync to mac. Have updated itunes and snow leopard. When I plug it in, it is recognized in iphoto, not itunes. ipod is freezing. Have tried several times to set back to factory settings, but computer wont s
-
How to change the layout set for Search Results
Hi gurus. Im developing a search component for KM Search iView, and as a requirement the layout must change dynamically to display the search results. How do I get this to happen? public SearchParamsMap getSearchParamsMap() { SearchParamsMap m
-
I was trying to share a 1.05 min video. It was taking an entire day to render, so I stopped it. Now it won't share at all! Any suggestions?
-
JCo client connection Failed to create new JCO client connection
hi All I am trying to create a new JCO destination ion CE7.1 webdynpro content Admin. but I am getting following error. Exception while creating JCo client connection Failed to create new JCO client connection weter: com.sap.lcr.api.cimclient.LcrExce