Core center problem after flashing

i have
(2)operating system in my computer (win-98se)
and (win-2k).
newly I have flashing my BIOS with latest version of
liveupdate and now evrytings are running
good.
but whenever corecenter running in my computer in (win-98se)
I see a blue screen with this content:
( A FATAL EXCEPTION 0D HAS ACCURRED AT 0028:E9742715 IN VXD RUSHTOP (01)
+00000245.THE CURRENT APPLICATION WILL BE TERMINATED )
and when runing in (win2k) that have result in restarting the system .
but i dont have this problem with previous BIOS version .
withal :
i have this problem with previous version of core center and latest version
of that after flashig !
can anybody help me ?
[email protected]

What Version of Core-Center are you running?...Sean REILLY875

Similar Messages

Core Center Problems & General Questions added

On boot up after installing core center on my PC, I get warning messages telling me that core center doesnt have the correct drivers installed, and that core center is not compatable with my motherboard.
I just bought a MSI K8N Neo4-F ... any suggestions? This doesn't seem to be a common problem and I can't get any answers anywhere :(

After the proper bios adjustments and correct settings i can use corecenter to reach the maximium overclocking setting for this tool.
In bios i do have to set vcore at 1.45 and HT at 4x , disable agressive timings.
This way will lead to a fsb of 222, for my memory also without changing the timings leading to a 6600 score in sandra for memory.
My cpu will clock 2666 then.
Also i have to overvolt through corecenter for cpu and memory,both maxed out giving 2.85 for mem and 1.58 for vcore total.
Now i'm not running this since i don't need the extra heat and my games don't require it either,yet.
And i can run my cpu higher also,but that's not the issue.
It's a way to see with which settings you get more performance without messing up the bios.
Finding your way through it you can then set it in bios and forget about corecenter.
See it as a first step,because after that you can adjust memory timings to get more fsb over the 200mhz. thus finding a balanced setting that will give the most speed,because setting timings too loose will not always result in faster performance even if you can clock the mem higher.
Finally,you can also use clockgen to find your limits.This tool let me set the multiplier also to max out the cpu without compromising the memory.Also keep in mind that different cpu cores will give different results,you can't compare settings with different hardware after all.The venice core is a nice cpu for adjusting fsb settings which is for me a simple multiplier,also the memory divider on my board let me set a very high fsb if needed.Again,this is now a simple multiplier,it means nothing if i have it set at 230 or 340,i only have to bring down the cpu multiplier then to stay in spec and use the proper mem divider.

MSI Core Center Problem with the software

Hello all
Just wanted to let you know about a problem i had the other night. You will see my specs below but i recently installed core center and all was running well until 2 nights ago when the pc would start up into windows load up core center and then re-boot. The problem was core center it's self when windows was starting it up for some reason core center decided to overclock my pc i only realised this when i saw a brief glimpse of the CPU speed as core center started it was over 2.6 GHZ no wonder the machine shutdown i eventually got it to boot up and get into core center where i found that this time it was trying to run my machine at a FSB of 215 i reset this back to 200 and the re-booting stopped i decided to just un-install core center to save any further problem.
Have any of you guys had this problem and how many are having a similiar problem but don't realise it thinking it is the cpu or heat related just thought i would let you know about this in case anyone does have a similiar problem
Cheers everyone

i didn't even install it to tweak or overclock i was only using it to monitor my temps etc. seeing as it came on the installation disk did look at the overclocking features of it but after looking at them i returned to the default settings prefering if and when i try overclocking to do it through the bios. I was surprised as anyone that core center decided it was going to overclock my system on it's own, Maybe it's become self aware LOL
I just put this thread up in case anyone else has it installed and has similiar problems as i did so they can check to see if this is their problem thought it might be helpful as i know lots of people do have problems and find there way here looking for help

MSI Core Center problem!!!

I´ve just updated the MSI Core Center to ver 1.6.2.0 because 1.6.1.0 kept increasing and decreasing CPU fan speed all the time, got a bit annoying.
After the install and restart of PC, when Core Center started, the PC automaticly restarted. Only way I can use my PC now is by dissabling Core Center, or going to older ver. but thats not the best solution.
I have passiv coling on NB, but this havent caused problems before, and keeps a normal temp.
MSI, i think u should look tthe Core Center program over, somethings wrong.
Pardon my english (I´m from Sweden).
//Khinax

hi khinax,
Please give your signature (computer spec).
Why you adjust the fan speed doesn't it run automatically with 3 pin?
Use CC with not much problem.
I use it for DOT with ver.1.6.1.0 which quit better than 1.6.2.0, this is the only software that can communicate with the COreCell.
Work fine right now.
Casing Tt Xaser III Skull
M/B 865 PE Neo-2 PFS Platinum Edition Bios Ver.3.6
CPU:P4 2.4C (HT enable) and ThermalTake SubZero 4G
(DOT Rank=Commander,Turbo,2395 mHz - 2760 mHz)
Memory: Corsair XMS 3500 2x512 meg (dual-channel dimm 2 and 4)
VGA:ELSA Gladiac 925 Ti4600
HD:2 SATA Maxtor 80gig and 1 ATA Maxtor 80Gig
CD/RW Yamaha and Pioneer DVD
PSU:ThermalTake Silent PurePower 480W (W0010/Black)
+5 V/40 A, +3.3 V/30 A, +12 V/18 A, -5 V/0.3 A, -12 V/0.8 A, +5 VSB/2 A Peak Load 550 W
Window XP PRO SP1
NEC FP2141SB
Microsoft DesktopPro
Sound Blaster Audigy 2 Platinum + Klipsch Promedia 4.1

MSI P35 NEO & dual core center problem

hi, i have a problem with my motherboard msi, Bios 1.2 and the dual core center 2.0.0.8 ,since days ago, the msi dual core center 2.0.0.8 so many times shows fan speeds alerts false alarms from the cpe temp, for that reason, i upgraded the appl to 2.0.1.6 ( the last),i set the oc level to 25% like with the older version, but time later the pc crash and put a black crash screen and it dont let me to overclock my cpu , i get back to 2.0.0.8 but the fan alarm dont stop, and i dont know if the newer version fix this problem
any help?
sys specs
msi p35 neo bios 1.2
core 2 quad q6600
2 gb value ram
psu duck

right, but i like to use msi dual core center, because i dont like to have the pc overclocked all the time, anyother suggestion for this?
thanks for the reply

Core Center freezes after 15 seconds

I dont know if its MOBO related or if its Core Center thats the problem.
When I start Core Center its ok but if i leave it running for more than about 15 seconds, the entire pc freezes and i have to reboot.
Regrdless of weather it is in the sys tray or maximised.
This problem also happens with PC Alert 4 (which I see has now been removed from the MSI download site)
I am running Core Center v 1.7.2.0
any ideas ?
thanks
Bubba

I haven't used CoreCenter in a long time, but if I remember correctly there is an Auto button that will overclock the computer until it crashes.
You should try to configure a utility like SpeedFan instead. CoreCenter seems to cause problems for the vast majority of users. It's a piece of software that seems to be worth exactly what you paid for it.

Core center problem at startup

I recently installed a new soundcard (Audigy2ZS) and it's been causing problems with core center i guess? When ever windows starts up it says "Servive has not been started" followed by "No Hardware Monitors". But when I load Corecenter individually it's fine. Any ideas?

its a common software conflict ... to solve
run msconfig ... go to the startup tab .. disable the sbdrvdet ... (i think its called that) ... to stop it loading ... i believe its to do with firwire .. so not really required ... msi software should then run ok

Sound Problems after Flash 11.3 Update

This reply is to the post by Ortho_Fan, number 28, which references a Firefox forum and "Firefox Hates New Update." This thread is specifically about problems that Flash 11.3 is causing with Firefox but the problem isn't with Firefox, it is with Flash Player 11.3.
I have no sound with Firefox, Chrome or Safari. I do have sound with IE9 but some people do not.
See these and probably other threads:
No sound in flash
http://forums.adobe.com/message/4483563?tstart=0
Problem with sound after update
http://forums.adobe.com/message/4483038

I've branched this discussion into it's own thread, because the issue you're describing is different than the issue from the previous thread, which was related to a specific crash instance. We'd like to keep the threads focused on particular issues to help both investigate and collate the information coming in, and to aid in discovery for people that are experiencing similar issues. A single thread with a dozen issues is far less useful in either regard.
For the sound issue you're experiencing, I would recommend that you follow the advice in the threads you've referenced above.
Flash Player 11.3 included new sound enhancments to facilitate support for low-latency audio, to facilitate more repsonsive sound in complex Flash games. While we try to test a wide array of hardware, and conduct months of beta testing, it's impossible to hit every device, OS, browser and driver combination.
Please ensure that you have the lastet drivers installed for your sound card/chipset. If the problem persists, please post details of your configuration to that forum thread so that we can track down that hardware/driver combo and investigate the problem.
As a workaround, you may wish to roll back to Flash Player 10.3, until a new version is available. Flash Player 10.3 contains up-to-date security patches (we maintain one major version back for Enterprise), and will revert the sound change that is causing problems for you.
http://www.adobe.com/support/flashplayer/downloads.html
Thanks!

Core center problems

HI
I have an MSI 865PE neo2 motherboard witch comes with the dinamic overcolocking technology (D.O.T)
but when i install core center the red button to activate DOT does not apear.
I wold like to know if there is any way to fix this
because i know someone ho bought a motherboard similar to mine exept his board had gigabit lan. and he didn´t have the same problem his core center works perfectly.
i wowld be grateful if you coud help me

The first generation boards only had dynamic overclocking in the FIS2R model, which was the one with gigabit lan. I thought all the rev 2 boards had the feature. The revision (ver) number is shown between the PCI slots.
If your board has this feature, the settings will be found in the bios. They use the army ranks to adjust the level.

K7N2 Delta problem after flashing from 5.0 to 5.3

I was using my K7N2 Delta nicely but after flashing the BIOS from 5.0 to 5.3 in LiveUpdate3 (all OK) and then when LiveUpdate ask to reboot... GOOD BYE!
When bootin the D-lights show that I have a processor damaged or not intalled properly (two red light up, and two green down...).
My processor is an Old Tbird 1.2 Ghz with 100FSB.
The question is: Why the mother stops recognicing the processor if before flashing BIOS worked nicely?.
J10 and J11 jumpers:
When I opened case to check out, I had the green J10 and J11 jumpers closed in the mother. The J10 was in safe mode, and the J11 jumper was closed...(133FSB-166FSB??).
I only have another athlon 1.1 ghz FSB100 processor to test the mobo, but I don´t want to take the risk of burn that one two (if is that the problem, of course).
So... I want to know how can I reflash the bios back (I have the old BIOS in a backup floppy disk, of course)... or if anyone else have the same problem as me....
Thanx a lot guys, and please help me... I´m very sad by now... because I don´t know how to get my computer to work.
Jose.
(from Argentina)

Garry,
Just add
group.Administrators=system
in your filerealm.properties file to login into console.
Hope it helps,
-satya
garry payten wrote:
I am migrating from 5.1 to 7.0 on Solaris. I was able to run the conversion of the weblogic.properties file to config.xml, I was also able to start the new admin server, but I was not able to log in to the console. I get the following error:
Authentication Denied
The username or password has been refused by WebLogic Server. Please try again.
I verified that the WL_USER and WL_PW were correctly set in the startscript and that the system password was set in the config.xml. Any hints? Thanks

N95 - Problem after flashing F/W No 12.0.013

Hello,
After flashing F/W 12 to my N95 / (RM-159 07.01) through Nokia Software Updater, I found that the phone was loaded with a different set of available languages. As a result, Greek language was no more available.
Before the update, the phone was operating with 'Automatic' menu language (resulting to Greek) and English writing language. It's an unbranded model.
Note: A month ago, I had upgraded another (unbranded) N95 with no problem (Greek language was existing also after the ugrade). However it had different settings: Menu in English and Writing in English.
Can anybody help to recover the lost set of languages in the last N95?
Thank you

Very strange.
I would suggest that you contact your network and tell them that your sim isn't working properly but don't tell them what caused it (so they can't blame it on you).
They should replace your sim free of charge as it's not your fault.

[msi k8t neo]problem after flashing to 2.20

hello
i have a MS-6702 (K8T Neo-FIS2R) motherboard and after flashing my bios it shows my ddr400 ram as ddr 333
here is my system config:
athlon 64 2800+
2x256 ddr 400
1x80gb and 1x120gb sata seagate hdd
ati radeon 9600xt
win xp sp1
also please could you tell me if i could use the ddr 533 sticks with my config....
thank you

thanks...
but i think its because the ddrs were made by 2 diff manuf. and the new bios reports the cas lwrong for both both are actually 2.5 but it shows 2.5 for one and 3 for the other....dont know why thuis happened...and cpu-z shows one clocked at 166.7 and the other at 200......
also the ddr 533s would not be able to give their full potential in my config?...
as i am planning to get new ddrs as i have to give these to my bro...

Problems after flashing msi845pe bios version 3.8

hi
i am difficulty after flashing the version 3.8 of the latest bios for msi
845pe max
i was not able to detect my Creative 5.1 sound card , a pci card
pls help

Problems here with verson 3.8 also.
Flashed to version 3.8 and lost both sound and modem (both PCI cards).
Sound card is Creative SoundBlaster 5.1. On-board sound already disabled.
Flashed back to version 3.7 and everything works again.

MSI NEO4 Platinum + DUAL CORE detection problem after soft reboot

I just build a new AMD dual core system (4800+) and it consistently fails to detect the second core after a soft reboot from windows Xp. The MSI NEO4 Platinum came pre-flashed with the latest bios version 1.B. If power off or use the reset button I can consistently get it to detect both processors. Anyone else having this problem? Or know of a solution?
Thanks.

Hi, I did a upgrade from a 3200 venice to a Opty 165.[This is a different situation than your new build] I deleted the uniprocessor ACPI from the device manager before I removed the old cpu. It was a bit weird for me in that at first the bios saw it as a 165 dual core then the next time it would come up as single core. It went back and forth a few times between single and dual core in bios. I tinkered with a few things in the bios but not really sure if it helped but it eventualy stayed as dual core in bios and showes as dual core in windows. I have my MPS table version set to 1.4 in bios [ but it was this before change in cpu] also my IOAPIC is now greyed out [unable to change it, but it wasn't before] - both these are in Advanced bios features. In power management I have the ACPI standby state set to auto. Hope some of this might help you.

Firefox and Adobe problems after Flash update last night

OK, this is a non-Apple question, but I haven't found any solution yet.
Everyone knows that to run the "Adobe Acrobat NPAPI Plug-in, Version 10.1.3" in Firefox, you had to open in 32-bit mode. I did and that plug-in, plus the "Adobe Acrobat Create PDF 1.2" extension worked just fine running Firefox 12. Tonight I got notification that I needed to update Adobe Flash Player. I did (quitting and restarting Firefox after the installation).
THEN up popped a warning - Firefox suggesting that I disable the NPAPI plug-in and finding out here that Firefox was disabling the plug-in. So I disabled it, restarted, etc. Then I found that the Create PDF plug-in would crash if I tried to save a web page as PDF within Firefox.
Is there any way to go BACK to the older Flash plug-in? That seems to be at the root of my problem. I can use PDF Browser plug-in in Firefox to display PDF files but what I really need is the Create PDF extension back (it's strangely absent from Safari - at least I've not been able to find it).
Any help out there?
Thanks,
Clinton

clintonfrombirmingham wrote:
petermac87 wrote:
clintonfrombirmingham wrote:
but what I really need is the Create PDF extension back (it's strangely absent from Safari - at least I've not been able to find it).
Create PDF or save as PDF?
Pete
Pete,
I can always use the PDF creator "Save as Adobe PDF" that is available from the Print menu and added by Acrobat Pro X, but it does not always save the hyperlinks correctly, etc., where the Adobe Create PDF does a fantastic job... I'd just like to have it back. It does not show up in the Safari extensions/add-ons for some reason.
Thanks for getting back so quickly!
Clinton
Then you may well have to go to the Mozilla Forums on this one. As I say, I steer clear of Firefox because of all it's bulky extentions.
Good Luck
Pete

Core center problem after flashing

Similar Messages

Maybe you are looking for