Core center work whit 1.4 bios?

please
why do not work core center whit bios 1.4...

it works i just checked it try uninstalling the core center and reinstall it

Similar Messages

Dual Core Center working in Vista but not XP on a dual boot system?

Hi All.
My system specs are:
Dual Boot Windows XP Pro SP2 and Windows Vista Ultimate
Temps for CPU in Vista averaging at 43 - 45 degrees in XP averaging at 38 to 42 degrees. It never seems to go much higher than 53 on Load.
Thermaltake Soprano tower
MSI K9N Diamond Motherboard
Hiper 580watt Modular PSU
4GB OCZ Gold 6400
AMD X2 6000+
2 X 300gb diamond maxtor 10 HDD
MSI Geforce 7800gt
DVD Rom
LG Dual Layer DVDRW+/-
I am running a dual boot system with Windows XP Pro SP2 on one partition and Windows Vista Ultimate on the other. Both operating systems seem to be operating properly except for an odd situation with Dual Core Center. In Windows XP Dual Core Center only indicates the Mainboard properties - No VGA, whereas on Windows Vista Ultimate Dual Core Center indicates both VGA & Motherboard properties. I have installed MSI Nvidia drivers for the Graphics card & also tried straight Nvidia drivers for the card but it has made no difference VGA will not show up in XP. Yet on installing Dual Core Center on the Vista partition VGA showed up immediately. Can anyone help.
If anyone can come up with an answer to this it would be a real help.
Many Thanks in advance.

have you try to update/install the dual core driver from amd?

Core Center does not show up!

HI Guys,
I have this problem while using Core Center. When I install it and restart my pc, my tasklist shows corecell with a processor usage of 50%, but is does not show up anywhere in my taskbar. The program is running, but I cannot see the screen.
MSI 875P NEO-FIS2R with 1.8 bios
Can anyone help me out? I don't understand

I found it !!!!
The problem was my Yamaha SW-1000G. When i remove it from my system Core Center works fine under WinXp.

Core center problems

HI
I have an MSI 865PE neo2 motherboard witch comes with the dinamic overcolocking technology (D.O.T)
but when i install core center the red button to activate DOT does not apear.
I wold like to know if there is any way to fix this
because i know someone ho bought a motherboard similar to mine exept his board had gigabit lan. and he didn´t have the same problem his core center works perfectly.
i wowld be grateful if you coud help me

The first generation boards only had dynamic overclocking in the FIS2R model, which was the one with gigabit lan. I thought all the rev 2 boards had the feature. The revision (ver) number is shown between the PCI slots.
If your board has this feature, the settings will be found in the bios. They use the army ranks to adjust the level.

MSI Core Center Gone Crazy!

Hello.
I'm using an MSI K8N Neo2 Platinum board with an AMD X2 4400+ CPU. (2.2GHz = 200MHz x 11)
I'm not doing any overclocking.
Core Center worked fine until I installed AMD's Processor Drivers.
I wanted to try Cool'n'Quiet, but benchmarking revealed that the system's performance degraded with it enabled... So I disabled Cool'n'Quiet, and then I notices something weird in Core Center: for some reason the clock speed alternates constantly between 200MHz to 74-45MHz to 327MHz!
This is really bizzare, and even frightening... Could I have damaged something in the CPU?
I tried to uninstall the AMD driver, but the clock speed in Core Center still fluctuates!
Then I installed it again - it didn't help.
Cool'n'Quiet is disabled in BIOS, the Power Scheme is "Always On" and as I said no overclocking is being done.
PS: in CPU-Z the clock speed is stable at 200.9MHz x 11.
Can anyone explain this to me? It's really frightening, I'm afraid that the CPU will burn or something...
Please help...
Thanks in advance!

I've uninstalled Core Center. It's just too buggy. But other programs do weird stuff as well; SpeedFan, for example, makes my CPU fan very noisy, and I don't want to control the speed by hand - the motherboard does fine job controlling it automatically.
About Vcore, I'm just asking if 1.30 is the right value, because I've read somewhere in this forum that it's supposed to be 1.40 for 90nm AMD CPUs.
I don't want to overclock; my system is fast enough as it is...
I havn't changed anything the the Core section of te BIOS.
My BIOS version is 1.9, and I've chosen 50 degrees as "Smart CPU Fan Temperatue". choosing 40 degrees makes the fan noisy as a tractor...
Right now the CPU temperature is always about 48 degrees C, and under load it's 50 or even 51 degrees.
Do you get 31 degrees when idle with your 4400+ processor?
What kind of cooling are you using? I'm using the fan that came with the processor... Perhaps switching to a Zalman fan will solve this problem?
Or is my BIOS just reporting wrong temperatures?
PS: SpeedFan reports my Northbridge temperatue as 45 degrees C... Is this too high as well?
Thanks!

"Dual Core Center does not support" error msg on K9N Platinum

Hi,
I just formated my system and installed all the drivers as I usually do. Last thing I installed was the Dual Core center. I cant make it run as I get "Dual Core Center does not support!" error message. I have an Athlon64 X2 4200+ with the latest cpu driver from AMD web site. Any idea on how I could make Dual Core Center work?
Thank you.

Oh ok.
Well on the CD there is a Core Center, but on the site if you go deep into the specific motherboard download section there is a Dual Core Center. I guess it is for dual CPUs.
I've download the AMD X2 Driver. I just wanted to use the Cool'N'Quiet option, since I was told that I needed the "Core Center" for that.

FSB differs in core center and BIOS...

I know my FSB is set to 200 (the default value) but on CoreCEnter (lattest version) it shows 203... I'm not in a mood to make OC before getting rid of this stock cooler (but that will not be for now) so I wanted to put FSB at 200, I know the differecen isn't much and the system is runnin fine but I simply don't want it...
I have 865PE Neo2-LS and I've disabled DOT in the BIOS (1.5). Do you know what's the problem?
By the way, I just clicked "default" on core center, on the fsb and voltages menu and the CPU just locked-up and a loud sound like PPIIIIIIIIIIIIII wouldn't stop... I rebooted and worked fine but what's the problem?

What you are seeing is the dynamic overclocking feature. If your Frequency setting is set to anything other than "disabled" Core Center will attempt to find an appropriate clock setting for you, based on processor demand and processor temp.
I prefer this to traditional overcocking because it only "kicks in" when I need it.

Dual Core Center doesn't work at all.

My mobo is P35Neo2-FR. Cpu is C2D E4600. I didn't overclocked it. WinXP professional 32BIT is installed.
.Net 2.0 is also installed.
From some time, I cannot launch Dual Core Center program. When I double-click the Dual Core Center icon,
There is nothing to be launched. I could not understand why the program suddenly didn't work.
Please let me know the solution to successfully launch Dure Core Center program.

yeah! my only experience with DCC is,... after it runs, it straight away turn on the siren, annoy the whole PC, and after 10 seconds, it shuts down my PC! That's the big annoyance already. The next time I reboot, I quickly terminate it from runnign longer, and straight away remove it from my PC. don't even bother to figure out where the alarm settings is.

Core center doesn't afect bios

when I change the FSB,vcore,memory voltage or AGP voltage in the core center it doesn't change in the bios, is there anything I can do to fix it?

No, the two are seperate things, bios is hardware overclocking but corecenter is software overclocking, use bios for best results when you overclock.
Babyface uk

BIOS/Core Center Temps

I'm slowly (not much available time) bringing my new KT6 Delta-FIS2R up. I have noticed that the Core Center CPU temp readout is 4-5 degrees C above the same item in the PC Health Section of the Bios. Because of the variety of Core Center problems that I see people writing in here forum with, I suspect that the Core Center is the monitor that's out of sync. Irregardless, is there a way to bring these two sources into agreement?

Core Center, as well as PC Alert, reads about 4-5C higher than the real temp. Use Speedfan instead, much more accurate, and takes less space.

Believe Core Center or BIOS voltage?

I have a K8N Neo2 Platinum board (bios 1.1). Does anyone know if I should trust the 12 volt reading from the BIOS hardware monitor or the MSI core center utility.
I have a brand new power supply (Enermax EG465P-VE FCA).
I am getting the following readings for the 12 volts:
BIOS READING
11.97 -12.03 volts
CORE CENTER READING
11.61-11.91 volts
I have been experiencing some stuttering with my new eVGA graphics card and the tech support thought I the power supply might be the issue since it is sensitive to the 12 Volt rail. They were not sure which voltage reading is correct. Unfortunately, I do not have a volt meter to probe inside. Could it be that once windows loads up, it activates more devices causing a voltage drop of some sort?
Any help is appreciated.

The BIOS readings are almost certainly more accurate.
How many amps does your PSU have on 12V? If 24+, then it's unlikely to be that - your voltages look well within spec.
Graphic stuttering can also be caused by several other things, including drivers, AGP fast writes to name a couple.
A slight voltage drop is normal with more devices, but a good PSU should regulate itself to keep within spec.
Edit: Just checked, and your PSU is 20A on 12V, which is "borderline OK", depending on who you ask
I'd try investigating other possibilities before you blame the PSU though.

Fan RPM's read 0 in BIOS no matter where I plug the CPU fan, but it registers in Core Center???

Hey,
I used to have BIOS Rev 1.0, updated to 1.2 thinking it would fix the problem about the Fan RPM's not registering, meaning they show 0 in the BIOS, but it didn't fix it, but it registers normally in Core Center in Windows XP Pro.
What the heck is the problem?? are any other poeple getting this problem?, everything is correctly connected and operates correctly.
Specs are in my signature.
Thank you,
Frank

Quote
Originally posted by frank2036
... the problem about the Fan RPM's not registering....
What the heck is the problem?? are any other poeple getting this problem?
I have the same problem. Don't worry too much about it. Most BIOS' won't recognize a CPU fan below a certain threshold, and the Thermaltake Silent Boost's stock fan probably fits into that category.

Voltage Question in Core Center/Bios

Just the other day, core center and bios started dislaying my voltages differently. This was right when my temps seemed to drastically increase as well.
My voltages before were always stable, especially the 12v line, it was always 12.12v, now its reading at a pretty constant 11.76-11.82v, the 3.3v line is reading at 3.31-3.46v, and the 5v line is reading at 4.97-5.05v.
I hooked up a multimeter to the 12v rail, and it read 12.12 constant.. I didnt hook it up to the powercord running into the mobo, but it seems like they will all read the same.
Could a dying power supply contribute to a huge heat increasement on the cpu and system temp?.. Im talking a good 15c increase.

ditch CoreCenter, it's buggy! Don't use it as it's buggy until it could screw up the overclocking settings and kill your system. MSI just didn't do a good job on Corecenter!

New core center version, not working!

Iv ealier used Core center with success on my old ms-6561 board. Just formated my drive and wanted to download again, but only found this new one and it does not support my board. Where cfan I find older core senter files?

core center does not display the temps correctly. download a program called speedfan. its better than corecenter

Alarm going off in core center

I have an alarm going off in core center Theres a red arrow next to wherer it says 12 v. then in the white box it says 10.95 v any one know what it means and what I could do about it I don't know whats normal for the readings I get in core center. My pc has been locking up and certian games wont load unless it's really cool in the room.

Good questions! Some folks have acceptable readings with CoreCenter, by verifying them with the Hardware Monitor (in BIOS). I compared them with my SpeedFan program, and as far as temps go..I use a laser temp gun to check CPU, case, and video card temps. Voltages on the PSU can be verified with a voltmeter of course. The specifications on your NB fan should be in your manual. Or you can check out this thread at Anandtech:
http://forums.anandtech.com/messageview.aspx?catid=29&threadid=1513370&STARTPAGE=2&enterthread=y

Core center work whit 1.4 bios?

Similar Messages

Maybe you are looking for