Core Data: "Allows external storage" for Transformable type?

When I create a Core Data attribute, and set its type to "Transformable", the "Allows external storage" option is unavailable. I only see it available for Binary type.
How can I use "Allows external storage" with Transformable type?

I wanted to post an update and let everyone know what I decided on and how well it works.
I went with the following setup.
eSATA Express Card
http://www.newegg.com/Product/Product.aspx?Item=N82E16839200006
eSATA enclousure
http://www.newegg.com/Product/Product.aspx?Item=N82E16817173043
eSATA drive
http://www.newegg.com/Product/Product.aspx?Item=N82E16822136218
All of this cost me a total of $159.57 for about 600gigs of high performance storage after being formated! I did some benchmarks and the drive is performing faster than my internal 7200rpm drive. It is not much faster but it is faster.
So I would have to say that if you really want some fast performing drives for just about anything eSATA is probably the way to go.
About the items,
The eSATA card looked used when i got it. The seal was broken and the item was dirty and had finger prints on it. It was however very easy to install. I just downloaded the newest drivers from rosewill.com plugged it in and it worked.
The hard disk enclosure seems well made and was a breeze to setup and install. It also does usb 2.0 if you need it. It has as a big cooling fan and includes a usb and sata cable as well as a eSATA bracket for your desktop pc.
All in all a great buy. So thank you again for all the info

Similar Messages

Error message "Data cannot be maintained for set type COMM_PR_PUR_1

Hi
While replicating the material master through R3AS I am getting an error for which the details to be checked in SMW01. In SMW01 when I selected the record for error details I am getting above error message. How to resolve ? Pls guide me stepwise. For your information I has cleared SMQ1 in R3 & SMQ2 in SRM
For curioisity next I selected all such error logs & deleted. It gave me one warning (some inconstinecies error) which I ignored. After that I checked SMQ1 of R3 & SMQ2 of SRM. No log
But I observed a strange thing. Whatever material codes I am creating it is going straightway to SRM without running R3AS transaction. I checked R3AM1, selected the row and cancelled. But still going without any interferrance. Why ? How shall I stop this.
Thanks

Hello,
>
BNR wrote:
> Hi
> While replicating the material master through R3AS I am getting an error for which the details to be checked in SMW01. In SMW01 when I selected the record for error details I am getting above error message. How to resolve ? Pls guide me stepwise. For your information I has cleared SMQ1 in R3 & SMQ2 in SRM
>(...)
Have a look at OSS note 1049693 - Data cannot be maintained for set type COMM_PR_PUR_1.
Regards.
Laurent.

Post data into Ajax function for Item type plugin

Please advise how to post data into Ajax function for item type plugin
Edited by: Casufi on Jan 16, 2013 7:44 AM

Casufi wrote:
Casufi wrote:
Please advise how to post data into Ajax function for item type plugin
Edited by: Casufi on Jan 16, 2013 7:44 AMI used the following code
var get = new htmldb_Get(null, html_GetElement(''pFlowId'').value, ''NATIVE='||apex_plugin.get_ajax_identifier||''', $v(''pFlowStepId''));
get.addParam(''x01'', node.data.key);
gReturn = get.get();You should use this published true ajax API instaed. apex.server.process( pAjaxIdentifier, pData, pOptions )

Advice on 2TB external storage for 1080 DVCPRO HD footage

I'm trying to find the best external storage for editing on a 17" Macbook Pro.
I'll be working on a feature shot with the HVX-200 at 1080i/24pa. I'm figuring we'll need approximately 2TB of storage.
Are FW800 drives fast enough to edit 1080?
Is it possible to run a 2TB SATA raid off the ExpressCard?
And as a side question, is the Macbook Pro fast enough to handle 1080? (we haven't purchased the system yet). It sounds to me like it will be, but wanted to see if anyone had any real world experience with it.
To be honest, I know just enough about the brave new world of the HVX-200 to get myself in trouble, so bear with me.
Any advice on the drives, and even good vendors to get them from, is much appreciated.
17" Macbook Pro Mac OS X (10.4.7)

Why are you shooting 1080? This camera does best at
720p. And in fact, the files sizes will be very
small at 720p24...just 22GB/hour. And since the
chips are really ideal for 720p...I see no gain in
shooting 1080i.
But that is me.
I just finished a show that was a mix of Varicam and
HVX and I edited 720p, and output to 1080p, and it
looked great. Airing on TV this Friday. Sadly, in
Standard Def...
Shane
That's a good question. lol.
The director wants 1080 because there's potentially going to be a 35mm blowup at the end of all this. Depending on who you ask, I've heard 720 may lose anywhere from 10-30% resolution on blowup compared to 1080.
Though it's been a back and forth decision. He's not 100% sold on 1080 (especially because we're finding few people have done it with the HVX-200) and 720 sure makes the workflow much easier.
That's been a question we've been unable to find a good answer to, is shooting 1080i really that much better (to justify all the extra work in the process) than just shooting 720/24pn and doing an upres at the end?
how exactly are the chips ideal for 720p?
By the way, I've been reading your blog. It's one of the best sources I've found out on the net for this stuff... Keep up the good work.
17" Macbook Pro Mac OS X (10.4.7)
17" Macbook Pro Mac OS X (10.4.7)

When you purchase extra cloud storage, does that allow more storage for music, apps, and so forth to be downloaded?

When you purchase extra cloud storage, does that allow more storage for music, apps, and so forth to be downloaded?

So only documents? it doesnt store pictures, videos, or any of that stuff? or it doesnt store settings to your applications? I just want to know how exactly iCloud can effectively help me with storage because I only have a 16 gb ipod 4s. I have already decided I will not download any music onto it or videos

Using external storage for purchased movies

Hello Apple TV users. I was about to pull the trigger and buy Apple TV, but I'm not clear on something.
If I use Apple TV to purchase HD movies from the iTunes Store (I'm guessing they come in at +/-6GB each, is the only storage option for these movies the Apple TV's internal storage? 40GB is nothing. 160GB is not much.
I understand using Apple TV storage as a cache for rentals, but for movies that I buy, I'd like to be able to keep things on a 500GB or 1TB drive (which I already use for iTunes storage anyway.
There's a USB port on the Apple TV, but I read in another post that this is a service port that only Apple can access...
Any guidance much appreciated.

Richard Gratton wrote:
If I use Apple TV to purchase HD movies from the iTunes Store (I'm guessing they come in at +/-6GB each, is the only storage option for these movies the Apple TV's internal storage?
Currently you can only rent HD movies from iTunes, you can't purchase to keep, so unless you want to download several HD movies with a view to a very intensive bout of film viewing it's probably not an issue, though it may affect the amount of synced content on your AppleTv.
There's a USB port on the Apple TV, but I read in another post that this is a service port that only Apple can access...
Correct - service port only - no reason it couldn't be enabled in a future software update but unlikely in my opinion. Would love to be proved wrong on this!
Personally, I think the trend will be towards centralised home media servers, and networked 'thin' clients for display with small amounts of onboard storage. I would love an "AppleTV Air" type device with solid state storage - should run cooler, use less power, and be less prone to hardware failure without a mechanical drive.
Even in it's current form I could see me using Apple TVs for years to come but the hard drives will eventually fail - a solid state drive AppleTv would have more longevity.
If they enabled USB to allow attaching external storage that would be the icing on the cake (more codecs, faster processor, and higher bitrate playback would be the lit candles!).
AC

External storage for early 08 mac pro for video storage and editing

Early 08 Mac Pro mod 3.1, 2x Intel 2.8 Quad Core Processors. Bus speed 1.6 Ghz. 10 GB DDR2 FB-Dimm 800 MHz. USB2, Firewire 400, 800. ATI Radeon HD 2600 PCIe 256 mbVRAM. Currently running OS 10.6.8.
I use machine for photo and video storage and editing. I tried using 2x 3TB and 2x1TB HDD internally ( 8 TB total). All are Seagate Barracuda SATA 7200. Experienced constant spinning wheel and lockup requiring manual shutdown. I had upgraded to Lion and to Maverick. Did not help so I did a clean install of primary with Snow Leopard and did not install past 10.6.8. Works now if I don’t exceed 3.5 TB internally. I also discovered that my Disk Permissions experienced voluminous corruption that could not be repaired if I installed Java for Mac OS 10.6 Update 17 as suggested each time I check for software updates.
I need to be able to have a total of about six TBs available in my system for storage and editing of video via Imovie. I don’t know the maximum of HDD storage that can be used in the four internal bays without causing lockup and corruption. If 3.5 TB is about the max, then I would like to have some ability to have external storage via firewire 800 if that would facility fast enough transfer for either video edition and or playback. I don’t know if thunderbolt can be installed via PCI card. I could add a SATA PCI card. However, I assume that would cause the same problem as experienced with 8 TBs installed internally in the four bays.
I would appreciate any suggestions.

olderguy1 wrote:
Do you mean 2x2TB and 2x3TB for a total internal capacity of 10TBs? Are you running Snow Leopard or something else? Actually, I took it to an authorized repair facility who ran checks and said nothing is wrong with the hardware.
Yes, I've got a total of to TB and I'm running Snow Leopard. If your hardware checks out, that pretty much makes it a software problem,,, reinstall the OS?
Does the High Point Technologies SATA3 PCIe connect to eternal drive enclosures or does it somehow connect to drives in some of your four internal bays?
Highpoint makes several RocketRAID 2700 series SATA3 controllers for Mac with external mini-SAS connectors, probably the cleanest/least expensive external hook-up. They also offer a combo internal/external board that (for marketing reasons) is listed as not working for internals with Mac Pro. I believe that this is due to pressure from Apple (who apparently does some business with High Point Tech) but to the best of my knowledge it will. Technically, the "not supported" statement is true since all the internal bays are tied to the motherboard SATA 2 controller, but this can be remedied with a special cable. HOWEVER... the boards are not bootable, so your system disk needs to be on the motherboard controller.
In truth, I bought one of their 8-port "internal only" boards designated for PC only and flashed it so the Mac Pro sees it as a 2722 board, so I have 8 internal ports. I'm not recommending you do the same unless you're pretty geeky, but the 2721 would give you half-and-half or the 2722 would give you 8 external with no mods to the board.

External Storage for iPad

I just received this in a marketing email from Seagate. I haven't seen it first hand so don't consider this an endorsement of recommendation, but for those seeking external storage to accompany your iPad, it might be worth a look:

http://www.seagate.com/www/en-us/products/external/external-hard-drive/goflex-sa tellite?cmpid=emc-goflexsat051611-itm-a#tTabContentOverview

What is best way to manage external storage for 160 GB Tiger iMac

Unfortunately I bought my 160 GB G5 a month before the Intel iMacs came out. I never thought the teens would take to movie making the way they have. I am constantly at 150 GB plus and have filled a 300 GB Maxtor external with a whole system backup image and then a whole boatload of iMovie files. I have purchased a new 500 GB WD, but is still unopened. I have also purchased but not installed Leopard. What is the recommended way to manage the external storage of all of my video - they want to make more movies! Would Time Machine work by keeping movies on for a couple of weeks and then deleting so I would have access through that interface? Help, I can't afford a newer iMac yet.

If they make movies, you will eat space. Be grateful, because if they get real good, they will be able to buy you a room full of storage. LOL.
Seriously, you do have a problem. Even though you could exchange the internal for a much larger drive, they will keep filling them. Film real estate is large. Just keep daisy chaining till you reach your tolerance limit, and if they want too make a movie after that, burn any you must delete to DVD, and then erase it.
Of course, remember, any file that is not at least 2 copies is at risk. You may want to burn some of those to DVd as backups, anyway. DVD's are very cheap.

A great solution to external storage for MacBook Pro Retina 13'?

Hi.
I'm looking for a good external storage (HDD) for my 128GB MacBook Pro Retina 13-inch.
128GB is way to low to storage music and films on etc.
Any great solutions for storage?

I've had good luck with LaCie External Hard Drives.
charlie

Procedure to Purge data from WF tables for Item Type POERROR

Hi,
I have executed concurrent program "Purge Obsolete Workflow Runtime Data" to purge old data for Item Type "REQAPPRV". After execution of the concurrent program i re-query to WF_ITEMS table to get the count of the records for "REQAPPRV" but all records did not get purged as "REQAPPRV" is present as PARENT_ITEM_KEY for Item Type "POERROR" in WF_ITEMS table.
Now to purge records of "REQAPPRV" i need to first Purge records of "POERROR". Now the problem is END_DATE of those POERROR records is NULL at WF_ITEMS table that is why concurrent program "Purge Obsolete Workflow Runtime Data" does not able to purge them. How can i resolve this issue?? Please guide..
Regards,
Priyanka

Hi,
I have already gone thorugh MOS doc, cross checked the queries provided in document and found that status of PARENT_ITEM_TYPE [REQAPPRV] is "COMPLETE" and the status of Chilld ITEM_TYPE [POERROR] is "ACTIVE". I want to close or Purge the child ITEM_TYPE. Can you guide how can we achive that ??
Regards,
Priyanka

External Storage for iPad2 as Photo Backup on holiday

Hello
I have an iPad2 and I would like to use it on holidays to store, view and sort photos. Is it possible to attach an external storage to the iPad anyhow to backup the photos to a 2nd location? Something like the HyperDrive but bidirectional. No cloud solution possible because no internet available on holidays. Something like a wireless Harddrive?
Any ideas?
Thank you
Jan

G-Tech running at 7500 RPM? I thought it was 7200 RPM. Are you using a single external drive?
I like the idea of a RAID that is hot-swappable. But it can be pricey option too. Unfortunately Drobo appears to be a hit or miss in the dependability department. And the G-Technology 4TB G-RAID is a RAID 0 only which if I understand correctly your sacrificing reliability for speed. Has anyone had good experience with Western Digital 4TB My Book Studio II Hard Drive?
As I mentioned before, my IT person is trying to persuade me to get a simple single 2TB external for backup/storage. And another tech person suggested two external drives, one for Time Machine and the other for cloning of the boot drive. But the problems is I want to store my work on the external and not the internal drive. But there is no redundancy in that setup. So what are my other options?
I could get 2 x 2TB external drives. Is there a way to have one drive clone the other in the background and without any user intervention?

Can you get external storage for iPad?

Is it possibly to purchase an external storage device that can be connected to iPad through the lightening plug?

While the iPad can read from a few USB sticks to import photos and videos, it cannot write out to it, or even access anything other than the photos and videos.
You cannot play directly from it, and they must be in a very specific format.
There are wireless alternatives which allow you to store movies and photos and other files in an external drive that can be accessed wirelesssly using a proprietary App. You can then play the videos and look at the photos directly on the App.
http://www.seagate.com/external-hard-drives/portable-hard-drives/wireless/wirele ss-plus/

Suggestions for setting up external storage for video editing please?

I am just starting up as a one-man video-editing business, using a 24 inch iMac running Snow Leopard, with Final Cut Studio. I have realised I'll need an external hard drive for HD footage, and I also need to get some back-up solution in place. Looking for speedy i/o, I would like to connect via the ethernet port (if only eSata was included in the iMac, eh!)
I've been planning to get a Drobo, but looking around the forums I see that people say it's too slow for using as a working drive to keep all my source footage, so I've been looking at the G-tech 4 Tb, as it says it is designed for media-content production. Does anyone know if I could use two of the drives for working from and two as back up? Or would it be better to keep back-up entirely seperate, and get a Drobo for that for the G-tech to back up to?
But I am also wondering whether a Mac Mini could be a worthwhile addition to this set up? I find myself sitting around waiting for rendering to complete on clips in my timeline (not to mention exporting to Quicktime conversion!), and I wondered if I put a Mac mini with Xserve installed (Apple store offers this with two 500gb hard drives inside), maybe I could farm the rendering out to the mini while I get on with editing on my iMac? That would require two installations of FCP, which I thought was allowed, but just today in a forum I saw that one would have to be a laptop... anyone have any suggestions for getting rendering done without stopping FCP from doing other things simultaneously?
Also I don't know if that arrangement is even feasible... I see all these things like Xsan and Artbox... as a one workstation editing suite, does FCP handle all the dataflows for external working drive and external back ups okay without having to introduce more controllers?
And can anyone explain to me how I could set up an ethernet connection to an external hard drive, or does that require the extra controllers mentioned above? I've seen it said that you can do it via ethernet, but haven't seen how you can actually go about doing it.
Thanks for overlooking my newbie quality, any answers received with humble gratitude!
Cheers, Syd

Hi there,
as NLEdit said, there will be loads of answers to this.
IMO i'd avoid drobo like the plague. G tech drives have served me incredibly well working on a huge variety of broadcast projects (just over the water from you in Bristol), I've had no probs with FW800 when using DVCproHD, pro res is ok, sometimes a little slow with multiple layers and of course it eats up storage space. so I'd go for 2 4tb drives, keep the backup one in a different location.
one tip that has saved me countless times is to format them as follows:-
mac os extended (not journalled)
create 2 partitions
partition 1 - make this small (1gig) and call it "drive a - do not use"
partition 2 - the rest of available storage and call "drive a"
this is because the boot sector of the drive is within the first partition and with this method if it goes down it can be re erased without losing all your footage.
If you call your backup drive the exact same name and have the exact same folder structure, you will not have to relink if you get a problem.
Ignore getting a mac mini for rendering, won't help at all in FCP. instead I would make every attempt you can at buying a mac pro rather than an imac. much more expansion/speed possibilities and a more robust solution.
best of luck
Andy

Date picker not showing for datetime type in advanced search page

Hi,
I have an advanced search page in my SharePoint 2013 site. There is a property which is of type datetime. For that I'm not getting a date picker. I don't know why this is not working. It is showing the date picker in SharePoint 2010 but not in 2013. Can
anyone help me on this? Thanks in advance.
Thanks,
Jawahar
Im searching more abt me...........

A date picker was never supported in Advanced Search.
Blog | SharePoint Field Notes Dev Tools |
SPFastDeploy | SPRemoteAPIExplorer

Core Data: "Allows external storage" for Transformable type?

Similar Messages

Maybe you are looking for